nes-proj/platform/stk501/contiki-stk501-default-init-lowlevel.c
barner d4b3436d21 Add new plattform definition for the STK 501 board featuring an
Atmel ATmega128.

Very brief instructions:

- Configure your programmer etc. in Makefile.stk501
- Use 'make upload' to flash your STK501.
- Setup a SLIP connection to your board (on the first serial port)
  and make sure you can ping it.
- Use 'make loadable_prg.ko' to build a demo module.
- gcc -ocodeprop ../../tools/codeprop.c
- ./codeprop <IP of STK> loadable_prg.ko
- Watch the module print "Tick, Tack, Tick, ..." on the second
  serial port.
2006-12-22 17:19:22 +00:00

49 lines
2.1 KiB
C

/*
* Copyright (c) 2006, Technical University of Munich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* Author: Simon Barner <barner@in.tum.de>
*
* @(#)$$
*/
#include "contiki-stk501.h"
void
init_lowlevel(void)
{
/* Configure default slip port with 115200 baud */
rs232_init(RS232_PORT_0, USART_BAUD_115200, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Second rs232 port for debugging */
rs232_init(RS232_PORT_1, USART_BAUD_9600, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Redirect stdout to second port */
rs232_redirect_stdout (RS232_PORT_1);
}