nes-proj/cpu/arm/common/SD-card/config.h

126 lines
4.3 KiB
C

#ifndef __EFSL_CONFIG_H__
#define __EFSL_CONFIG_H__
/* Close enough */
#define HW_ENDPOINT_LPC2000_SD
/* Memory configuration
--------------------
* Here you must configure wheter your processor can access memory byte
* oriented. All x86 processors can do it, AVR's can do it to. Some DSP
* or other microcontrollers can't. If you have an 8 bit system you're safe.
* If you are really unsure, leave the setting commented out, it will be slower
* but it will work for sure.
*/
/* disabled for ARM (mt): #define BYTE_ALIGNMENT */
/* Cache configuration
-------------------
* Here you must configure how much memory of cache you can/want to use.
* The number you put at IOMAN_NUMBUFFER is multiplied by 512. So 1 means
* 512 bytes cache, 4 means 2048 bytes cache. More is better.
* The number after IOMAN_NUMITERATIONS should be untouched.
* The last field (IOMAN_DO_MEMALLOC) is to tell ioman to allocate it's
* own memory in it's structure, or not. If you choose to do it yourself
* you will have to pass a pointer to the memory as the last argument of
* ioman_init.
*/
/*#define IOMAN_NUMBUFFER 1*/
#define IOMAN_NUMBUFFER 6
#define IOMAN_NUMITERATIONS 3
#define IOMAN_DO_MEMALLOC
/* Cluster pre-allocation
----------------------
* When writing files, the function that performs the actual write has to
* calculate how many clusters it will need for that request. It then allocates
* that number of new clusters to the file. Since this involves some calculations
* and writing of the FAT, you might find it beneficial to limit the number of
* allocations, and allow fwrite to pre-allocate a number of clusters extra.
* This setting determines how many clusters will be extra allocated whenever
* this is required.
* Take in carefull consideration how large your clustersize is, putting 10 here
* with a clustersize of 32kb means you might waste 320 kb.
* The first option is for preallocating files, the other is used when enlarging
* a directory to accomodate more files
*/
/*#define CLUSTER_PREALLOC_FILE 0*/
#define CLUSTER_PREALLOC_FILE 2
#define CLUSTER_PREALLOC_DIRECTORY 0
/* Endianess configuration
-----------------------
* Here you can configure wheter your architecture is little or big endian. This
* is important since all FAT structures are stored in intel little endian order.
* So if you have a big endian system the library has to convert all figures to
* big endian in order to work.
*/
#define LITTLE_ENDIAN
/* Date and Time support
---------------------
* Here you can enable or disable date and time support. If you enable
* it you will have to create 6 functions, that are described in the
* EFSL manual. If the functions are not present when linking your
* program with the library you will get unresolved dependencies.
*/
/*#define DATE_TIME_SUPPORT*/
/* Error reporting support
-----------------------
* When you receive an error in userland, it usually only gives limited
* information (most likely, fail or success). If error detection and
* reporting is important for you, you can enable more detailed error
* reporting here. This is optional, the costs are 1 byte per object,
* and a small increase in code size.
* You can enable error recording for all object, or you can select the
* object manually.
* For full error reporting use FULL_ERROR_SUPPORT
* For only the base-core of the library use BASE_ERROR_SUPPORT
* For IO/Man use ERRSUP_IOMAN
* For Disc use ERRSUP_IOMAN
* For Part use ERRSUP_PARTITION
* For Fs use ERRSUP_FILESYSTEM
* For File use ERRSUP_FILE
*/
#define FULL_ERROR_SUPPORT
/*#define BASE_ERROR_SUPPORT*/
/* List options
------------
* In this section youcan configure what kind of data you will get from
* directory listing requests. Please refer to the documentation for
* more information
*/
#define LIST_MAXLENFILENAME 12
/* Debugging configuration
-----------------------
* Here you can configure the debugging behaviour. Debugging is different
* on every platform (see debug.h for more information).
* If your hardware has no means of output (printf) dont define any anything,
* and nothing will happen. For real world use debugging should be turned off.
*/
/* #define DEBUG */
#define lpc2000_debug_printf dbg_blocking_printf
#endif