516 lines
14 KiB
C
516 lines
14 KiB
C
/* This file has been prepared for Doxygen automatic documentation generation.*/
|
|
/*! \file avr_flash.c *********************************************************
|
|
*
|
|
* \brief
|
|
* This file writes/reads to/from flash memory internal to the AVR.
|
|
*
|
|
* \addtogroup usbstick
|
|
*
|
|
* \author
|
|
* Colin O'Flynn <coflynn@newae.com>
|
|
******************************************************************************/
|
|
/*
|
|
Copyright (c) 2008 Colin O'Flynn
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
* Neither the name of the copyright holders nor the names of
|
|
contributors may be used to endorse or promote products derived
|
|
from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/**
|
|
\addtogroup usbstorage
|
|
@{
|
|
*/
|
|
|
|
//_____ I N C L U D E S ___________________________________________________
|
|
|
|
#include "config.h" // system configuration
|
|
#include "storage/avr_flash.h"
|
|
|
|
#include <avr/pgmspace.h>
|
|
#include <avr/boot.h>
|
|
|
|
#ifndef SPM_PAGESIZE
|
|
#error SPM_PAGESIZE undefined!!!
|
|
#endif
|
|
|
|
|
|
//_____ M A C R O S ________________________________________________________
|
|
//_____ P R I V A T E D E C L A R A T I O N _____________________________
|
|
|
|
|
|
//_____ D E F I N I T I O N ________________________________________________
|
|
|
|
|
|
#define MEM_BASE_ADDRESS 0x10000UL
|
|
|
|
|
|
DATA U32 gl_ptr_mem; /* memory data pointer */
|
|
|
|
|
|
/* Disk management */
|
|
bit reserved_disk_space = FALSE; /* reserved space for application on disk */
|
|
|
|
|
|
U32 AVRF_DISK_SIZE = 111; /* 57 KB, some room at end saved for bootloader section */
|
|
|
|
|
|
void avrf_check_init( void );
|
|
|
|
|
|
//_____ D E C L A R A T I O N ______________________________________________
|
|
|
|
//!
|
|
//! @brief This function initializes the hw/sw ressources required to drive the AVR Flash
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//!/
|
|
void avrf_mem_init(void)
|
|
{
|
|
;
|
|
}
|
|
|
|
|
|
//!
|
|
//! @brief This function tests the state of the AVR Flash
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//! @return Ctrl_status
|
|
//! It is ready -> CTRL_GOOD
|
|
//! Else -> CTRL_NO_PRESENT
|
|
//!/
|
|
Ctrl_status avrf_test_unit_ready(void)
|
|
{
|
|
return CTRL_GOOD;
|
|
}
|
|
|
|
|
|
//!
|
|
//! @brief This function gives the address of the last valid sector.
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//! @param *u32_nb_sector number of sector (sector = 512B). OUT
|
|
//!
|
|
//! @return Ctrl_status
|
|
//! It is ready -> CTRL_GOOD
|
|
//!/
|
|
Ctrl_status avrf_read_capacity( U32 *u32_nb_sector )
|
|
{
|
|
*u32_nb_sector = AVRF_DISK_SIZE;
|
|
return CTRL_GOOD;
|
|
}
|
|
|
|
|
|
//!
|
|
//! @brief This function returns the write protected status of the memory.
|
|
//!
|
|
//! Only used by memory removal with a HARDWARE SPECIFIC write protected detection
|
|
//! !!! The customer must unplug the memory to change this write protected status,
|
|
//! which cannot be for a DF.
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//! @return FALSE -> the memory is not write-protected (always)
|
|
//!/
|
|
Bool avrf_wr_protect(void)
|
|
{
|
|
return FALSE;
|
|
}
|
|
|
|
|
|
//!
|
|
//! @brief This function tells if the memory has been removed or not.
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//! @return FALSE -> The memory isn't removed
|
|
//!/
|
|
Bool avrf_removal(void)
|
|
{
|
|
return FALSE;
|
|
}
|
|
|
|
|
|
|
|
//------------ STANDARD FUNCTIONS to read/write the memory --------------------
|
|
|
|
//!
|
|
//! @brief This function performs a read operation of n sectors from a given address on.
|
|
//! (sector = 512B)
|
|
//!
|
|
//! DATA FLOW is: AVRF => USB
|
|
//!
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//! @param addr Sector address to start the read from
|
|
//! @param nb_sector Number of sectors to transfer
|
|
//!
|
|
//! @return Ctrl_status
|
|
//! It is ready -> CTRL_GOOD
|
|
//! A error occur -> CTRL_FAIL
|
|
//!
|
|
Ctrl_status avrf_read_10( U32 addr , U16 nb_sector )
|
|
{
|
|
avrf_read_open(addr); // wait device is not busy, then send command & address
|
|
avrf_read_sector(nb_sector); // transfer data from memory to USB
|
|
avrf_read_close(); // unselect memory
|
|
return CTRL_GOOD;
|
|
}
|
|
|
|
|
|
//! This fonction initialise the memory for a write operation
|
|
//!
|
|
//! DATA FLOW is: USB => DF
|
|
//!
|
|
//!
|
|
//! (sector = 512B)
|
|
//! @param addr Sector address to start write
|
|
//! @param nb_sector Number of sectors to transfer
|
|
//!
|
|
//! @return Ctrl_status
|
|
//! It is ready -> CTRL_GOOD
|
|
//! A error occur -> CTRL_FAIL
|
|
//!
|
|
Ctrl_status avrf_write_10( U32 addr , U16 nb_sector )
|
|
{
|
|
|
|
avrf_write_open(addr); // wait device is not busy, then send command & address
|
|
avrf_write_sector(nb_sector); // transfer data from memory to USB
|
|
avrf_write_close(); // unselect memory
|
|
return CTRL_GOOD;
|
|
}
|
|
|
|
|
|
//------------ AVR FLASH LOWER LEVEL ROUTIENS -----------------------------------------
|
|
|
|
//!
|
|
//! @brief This function opens a DF memory in read mode at a given sector address.
|
|
//!
|
|
//! NOTE: Address may not be synchronized on the beginning of a page (depending on the DF page size).
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//! @param pos Logical sector address
|
|
//!
|
|
//! @return bit
|
|
//! The open succeeded -> OK
|
|
//!/
|
|
bit avrf_read_open (Uint32 pos)
|
|
{
|
|
// Set the global memory ptr at a Byte address.
|
|
gl_ptr_mem = (pos * 512) + MEM_BASE_ADDRESS;
|
|
|
|
return OK;
|
|
}
|
|
|
|
|
|
//!
|
|
//! @brief This function unselects the current DF memory.
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//!/
|
|
void avrf_read_close (void)
|
|
{
|
|
;
|
|
}
|
|
|
|
|
|
|
|
//!
|
|
//! @brief This function is optimized and writes nb-sector * 512 Bytes from
|
|
//! DataFlash memory to USB controller
|
|
//!
|
|
//! DATA FLOW is: DF => USB
|
|
//!
|
|
//!
|
|
//! NOTE:
|
|
//! - First call must be preceded by a call to the df_read_open() function,
|
|
//! - The USB EPIN must have been previously selected,
|
|
//! - USB ping-pong buffers are free,
|
|
//! - As 512 is always a sub-multiple of page size, there is no need to check
|
|
//! page end for each Bytes,
|
|
//! - Interrupts are disabled during transfer to avoid timer interrupt,
|
|
//! - nb_sector always >= 1, cannot be zero.
|
|
//!
|
|
//! @warning code:?? bytes (function code length)
|
|
//!
|
|
//! @param nb_sector number of contiguous sectors to read [IN]
|
|
//!
|
|
//! @return bit
|
|
//! The read succeeded -> OK
|
|
//!/
|
|
bit avrf_read_sector (Uint16 nb_sector)
|
|
{
|
|
U8 i,j;
|
|
do
|
|
{
|
|
for (i = 8; i != 0; i--)
|
|
{
|
|
Disable_interrupt(); // Global disable.
|
|
|
|
for (j = 0; j < 64; j++) {
|
|
Usb_write_byte(pgm_read_byte_far(gl_ptr_mem++));
|
|
}
|
|
|
|
|
|
//# Send the USB FIFO IN content to the USB Host.
|
|
Usb_send_in(); // Send the FIFO IN content to the USB Host.
|
|
|
|
Enable_interrupt(); // Global interrupt re-enable.
|
|
|
|
// Wait until the tx is done so that we may write to the FIFO IN again.
|
|
while(Is_usb_write_enabled()==FALSE);
|
|
}
|
|
nb_sector--; // 1 more sector read
|
|
}
|
|
while (nb_sector != 0);
|
|
|
|
return OK; // Read done.
|
|
}
|
|
|
|
|
|
//!
|
|
//! @brief This function opens a DF memory in write mode at a given sector
|
|
//! address.
|
|
//!
|
|
//! NOTE: If page buffer > 512 bytes, page content is first loaded in buffer to
|
|
//! be partially updated by write_byte or write64 functions.
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//! @param pos Sector address
|
|
//!
|
|
//! @return bit
|
|
//! The open succeeded -> OK
|
|
//!/
|
|
bit avrf_write_open (Uint32 pos)
|
|
{
|
|
// Set the global memory ptr at a Byte address.
|
|
gl_ptr_mem = (pos * 512) + MEM_BASE_ADDRESS;
|
|
|
|
return OK;
|
|
}
|
|
|
|
|
|
//!
|
|
//! @brief This function fills the end of the logical sector (512B) and launch
|
|
//! page programming.
|
|
//!
|
|
//! @warning Code:?? bytes (function code length)
|
|
//!
|
|
//!/
|
|
void avrf_write_close (void)
|
|
{
|
|
;
|
|
}
|
|
|
|
|
|
|
|
/* This code can be setup to work with the DFU bootloader, which comes with the AT90USB1287. However I haven't
|
|
had time to test it with such */
|
|
#define LAST_BOOT_ENTRY 0xFFFE
|
|
|
|
|
|
void dfuclone_boot_buffer_write(uint16_t dummy, uint32_t baseaddr, uint16_t pageaddr, uint16_t word);
|
|
void dfuclone_boot_page_erase(uint32_t dummy1, uint16_t dummy2, uint32_t address);
|
|
void dfuclone_boot_page_write(uint32_t dummy1, uint16_t dummy2, uint32_t address);
|
|
|
|
|
|
/* Enable the use of the AVR DFU bootloader by defining "USE_AVRDFU_BOOTLOADER", it will
|
|
then call the low-level routines already in the bootloader. */
|
|
#ifdef USE_AVRDFU_BOOTLOADER
|
|
|
|
#error UNTESTED/UNSUPPORTED AT THIS TIME
|
|
|
|
// These functions pointers are used to call functions entry points in bootloader
|
|
void (*dfu_boot_buffer_write) (uint16_t dummy, uint32_t baseaddr, uint16_t pageaddr, uint16_t word)=
|
|
(void (*)(uint16_t, uint32_t, uint16_t, uint16_t))(LAST_BOOT_ENTRY-6);
|
|
|
|
void (*dfu_boot_page_write) (uint32_t dummy1, uint16_t dummy2, uint32_t address)=
|
|
(void (*)(uint32_t, uint16_t, uint32_t))(LAST_BOOT_ENTRY-4);
|
|
|
|
void (*dfu_boot_page_erase) (uint32_t dummy1, uint16_t dummy2, uint32_t address)=
|
|
(void (*)(uint32_t, uint16_t, uint32_t))(LAST_BOOT_ENTRY-2);
|
|
|
|
#else
|
|
|
|
// These functions pointers are used to call functions entry points in bootloader
|
|
void (*dfu_boot_buffer_write) (uint16_t dummy, uint32_t baseaddr, uint16_t pageaddr, uint16_t word)=
|
|
dfuclone_boot_buffer_write;
|
|
|
|
void (*dfu_boot_page_write) (uint32_t dummy1, uint16_t dummy2, uint32_t address)=
|
|
dfuclone_boot_page_write;
|
|
|
|
void (*dfu_boot_page_erase) (uint32_t dummy1, uint16_t dummy2, uint32_t address)=
|
|
dfuclone_boot_page_erase;
|
|
|
|
|
|
|
|
#endif
|
|
|
|
//!
|
|
//! @brief This function is optimized and writes nb-sector * 512 Bytes from
|
|
//! USB controller to DataFlash memory
|
|
//!
|
|
//! DATA FLOW is: USB => DF
|
|
//!
|
|
//!
|
|
//! NOTE:
|
|
//! - First call must be preceded by a call to the df_write_open() function,
|
|
//! - As 512 is always a sub-multiple of page size, there is no need to check
|
|
//! page end for each Bytes,
|
|
//! - The USB EPOUT must have been previously selected,
|
|
//! - Interrupts are disabled during transfer to avoid timer interrupt,
|
|
//! - nb_sector always >= 1, cannot be zero.
|
|
//!
|
|
//! @warning code:?? bytes (function code length)
|
|
//!
|
|
//! @param nb_sector number of contiguous sectors to write [IN]
|
|
//!
|
|
//! @return bit
|
|
//! The write succeeded -> OK
|
|
//!/
|
|
bit avrf_write_sector (Uint16 nb_sector)
|
|
{
|
|
Byte i, j;
|
|
U16 w;
|
|
|
|
U16 pgindex = 0;
|
|
U16 sector_bytecounter = 0;
|
|
|
|
|
|
do
|
|
{
|
|
//# Write 8x64b = 512b from the USB FIFO OUT.
|
|
for (i = 8; i != 0; i--)
|
|
{
|
|
// Wait end of rx in USB EPOUT.
|
|
while(Is_usb_read_enabled()==FALSE);
|
|
|
|
Disable_interrupt(); // Global disable.
|
|
|
|
//If start of page, erase it!
|
|
if (pgindex == 0) {
|
|
(*dfu_boot_page_erase)(0, 0, gl_ptr_mem);
|
|
}
|
|
|
|
//For all the data in the endpoint, write to flash temp page
|
|
for (j = 0; j < 32; j++) {
|
|
w = Usb_read_byte();
|
|
w += Usb_read_byte() << 8;
|
|
(*dfu_boot_buffer_write)(0, gl_ptr_mem, pgindex, w);
|
|
pgindex += 2;
|
|
}
|
|
|
|
Usb_ack_receive_out(); // USB EPOUT read acknowledgement.
|
|
|
|
//If we have filled flash page, write that sucker to memory
|
|
if (pgindex == SPM_PAGESIZE) {
|
|
|
|
(*dfu_boot_page_write)(0,0, gl_ptr_mem);
|
|
|
|
Enable_interrupt(); // Global enable again
|
|
|
|
gl_ptr_mem += SPM_PAGESIZE; // Update the memory pointer.
|
|
pgindex = 0;
|
|
|
|
sector_bytecounter += SPM_PAGESIZE;
|
|
|
|
if(sector_bytecounter == 512) {
|
|
nb_sector--; // 1 more sector written
|
|
sector_bytecounter = 0;
|
|
}
|
|
|
|
}
|
|
|
|
} // for (i = 8; i != 0; i--)
|
|
|
|
}
|
|
while (nb_sector != 0);
|
|
|
|
return OK; // Write done
|
|
}
|
|
|
|
|
|
#ifndef USE_AVRDFU_BOOTLOADER
|
|
/* Perform read/write of FLASH, using same calling convention as low-level routines in AVR DFU bootloader */
|
|
|
|
BOOTLOADER_SECTION void dfuclone_boot_buffer_write(uint16_t dummy, uint32_t baseaddr, uint16_t pageaddr, uint16_t word)
|
|
{
|
|
boot_page_fill(baseaddr + pageaddr, word);
|
|
return;
|
|
}
|
|
|
|
|
|
BOOTLOADER_SECTION void dfuclone_boot_page_erase(uint32_t dummy1, uint16_t dummy2, uint32_t address)
|
|
{
|
|
boot_page_erase(address);
|
|
boot_spm_busy_wait();
|
|
boot_rww_enable();
|
|
return;
|
|
}
|
|
|
|
BOOTLOADER_SECTION void dfuclone_boot_page_write(uint32_t dummy1, uint16_t dummy2, uint32_t address)
|
|
{
|
|
boot_page_write(address);
|
|
boot_spm_busy_wait();
|
|
boot_rww_enable();
|
|
return;
|
|
}
|
|
#endif //USE_AVRDFU_BOOTLOADER
|
|
|
|
//------------ SPECIFIC FONCTION USB TRANSFER -----------------------------------------
|
|
|
|
//** If your device transfer have a specific transfer for USB (Particularity of Chejudo product, or bootloader)
|
|
// !!! In this case the driver must be know the USB access
|
|
|
|
//! This fonction transfer the memory data (programed in scsi_read_10) directly to the usb interface
|
|
//!
|
|
//! @return Ctrl_status
|
|
//! It is ready -> CTRL_GOOD
|
|
//!
|
|
Ctrl_status avrf_usb_read()
|
|
{
|
|
return CTRL_GOOD;
|
|
}
|
|
|
|
|
|
//! This fonction transfer the usb data (programed in scsi_write_10) directly to the memory data
|
|
//!
|
|
//! @return Ctrl_status
|
|
//! It is ready -> CTRL_GOOD
|
|
//!
|
|
Ctrl_status avrf_usb_write( void )
|
|
{
|
|
return CTRL_GOOD;
|
|
}
|
|
|
|
/** @} */
|