nes-proj/cpu/cc26xx-cc13xx/rf-core/api/ieee_mailbox.h
Jonas Olsson 01e36532c2 Add support for the CC13xx CPU
This commit:

* Moves all cpu files from cpu/cc26xx to cpu/cc26xx-cc13xx
* Bumps the CC26xxware submodule to the latest TI release
* Adds CC13xxware as a submodule
* Adds support for sub-ghz mode / IEEE 802.15.4g
* Splits the driver into multiple files for clarity. We now have the following structure:
  * A common module that handles access to the RF core, interrupts etc
  * A module that takes care of BLE functionality
  * A netstack radio driver for IEEE mode (2.4GHz)
  * A netstack radio driver for PROP mode (sub-ghz - multiple bands)

This commit also adds tick suppression functionality, applicable to all chips of the CC26xx and CC13xx families. Instead waking up on every clock tick simply to increment our software counter, we now only wake up just in time to service the next scheduled etimer. ContikiMAC-triggered wakeups are unaffected.

Laslty, this commit also applies a number of minor changes:
* Addition of missing includes
* Removal of stub functions
* Removal of a woraround for a CC26xxware bug that has now been fixed
2015-08-23 19:54:42 +01:00

76 lines
3.4 KiB
C

/******************************************************************************
* Filename: ieee_mailbox.h
* Revised: $ $
* Revision: $ $
*
* Description: Definitions for IEEE 802.15.4 interface
*
* Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
#ifndef IEEE_MAILBOX_H_
#define IEEE_MAILBOX_H_
#include "mailbox.h"
/// \name Radio operation status
///@{
/// \name Operation not finished
///@{
#define IEEE_SUSPENDED 0x2001 ///< Operation suspended
///@}
/// \name Operation finished normally
///@{
#define IEEE_DONE_OK 0x2400 ///< Operation ended normally
#define IEEE_DONE_BUSY 0x2401 ///< CSMA-CA operation ended with failure
#define IEEE_DONE_STOPPED 0x2402 ///< Operation stopped after stop command
#define IEEE_DONE_ACK 0x2403 ///< ACK packet received with pending data bit cleared
#define IEEE_DONE_ACKPEND 0x2404 ///< ACK packet received with pending data bit set
#define IEEE_DONE_TIMEOUT 0x2405 ///< Operation ended due to timeout
#define IEEE_DONE_BGEND 0x2406 ///< FG operation ended because necessary background level
///< operation ended
#define IEEE_DONE_ABORT 0x2407 ///< Operation aborted by command
///@}
/// \name Operation finished with error
///@{
#define IEEE_ERROR_PAR 0x2800 ///< Illegal parameter
#define IEEE_ERROR_NO_SETUP 0x2801 ///< Operation using Rx or Tx attemted when not in 15.4 mode
#define IEEE_ERROR_NO_FS 0x2802 ///< Operation using Rx or Tx attemted without frequency synth configured
#define IEEE_ERROR_SYNTH_PROG 0x2803 ///< Synthesizer programming failed to complete on time
#define IEEE_ERROR_RXOVF 0x2804 ///< Receiver overflowed during operation
#define IEEE_ERROR_TXUNF 0x2805 ///< Transmitter underflowed during operation
///@}
///@}
#endif /* IEEE_MAILBOX_H_ */