giomba/nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
66622e6920
nes-proj/platform/esb/dev/tr1001-gcr.c

851 lines
21 KiB
C
Raw Blame History

/*
* Copyright (c) 2005, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* @(#)$Id: tr1001-gcr.c,v 1.12 2007/11/28 21:28:03 nifi Exp $
*/
/**
* \addtogroup esb
* @{
*/
/**
* \defgroup tr1001 TR1001 radio tranciever device driver
* @{
*/
/**
* \file
* Device driver and packet framing for the RFM-TR1001 radio module.
* \author Adam Dunkels <adam@sics.se>
*
* This file implements a device driver for the RFM-TR1001 radio
* tranciever.
*
*/
#include "contiki-esb.h"
#include "dev/tr1001.h"
#include "dev/radio-sensor.h"
#include "lib/gcr.h"
#include "lib/crc16.h"
#include <io.h>
#include <signal.h>
#include <string.h>
#define RXSTATE_READY 0
#define RXSTATE_RECEVING 1
#define RXSTATE_FULL 2
#define SYNCH1 0x3c
#define SYNCH2 0x03
#if TR1001_STATISTICS
static unsigned short sstrength_dropped,
sstrength_max, sstrength_min, tmp_sstrength_max, tmp_sstrength_min;
/* The number of dropped packets */
static unsigned short packets_err;
/* The number of accepted packets */
static unsigned short packets_ok;
#endif /* TR1001_STATISTICS */
/*
* The buffer which holds incoming data.
*/
#define RXBUFSIZE UIP_BUFSIZE
unsigned char tr1001_rxbuf[RXBUFSIZE];
/*
* The length of the packet that currently is being received.
*/
static unsigned short tr1001_rxlen = 0;
/*
* The reception state.
*/
volatile unsigned char tr1001_rxstate = RXSTATE_READY;
static u8_t radio_active;
static u16_t rxcrc, rxcrctmp;
/*
* The structure of the packet header.
*/
struct tr1001_hdr {
u8_t len[2]; /**< The 16-bit length of the packet in network byte
order. */
};
/*
* The length of the packet header.
*/
#define TR1001_HDRLEN sizeof(struct tr1001_hdr)
#define OFF 0
#define ON 1
static u8_t onoroff = OFF;
#define NUM_SYNCHBYTES 4
void tr1001_default_rxhandler(unsigned char c);
PT_THREAD(tr1001_default_rxhandler_pt(unsigned char c));
static struct pt rxhandler_pt;
/*
* This timer is used to keep track of when the last byte was received
* over the radio. If the inter-byte time is too large, the packet
* currently being received is discarded and a new packet reception is
* initiated.
*/
static struct timer rxtimer;
static unsigned short tmp_sstrength, sstrength;
static unsigned short tmp_count;
#define DEBUG 0
#if DEBUG
#include <stdio.h>
#define LOG(...) printf(__VA_ARGS__)
#else
#define LOG(...)
#endif
#define GCRLOG(...) /* printf(__VA_ARGS__)*/
/*---------------------------------------------------------------------------*/
PROCESS(tr1001_process, "TR1001 driver");
/*---------------------------------------------------------------------------*/
static void (* receiver_callback)(const struct radio_driver *);
static void tr1001_set_receiver(void (* recv)(const struct radio_driver *));
static int tr1001_on(void);
static int tr1001_off(void);
const struct radio_driver tr1001_driver = {
tr1001_send,
tr1001_read,
tr1001_set_receiver,
tr1001_on,
tr1001_off
};
/*---------------------------------------------------------------------------*/
#if TR1001_STATISTICS
#define PACKET_DROPPED() do { \
if(packets_err < ~0) {\
packets_err++;\
}\
sstrength_dropped = (tmp_count ? ((tmp_sstrength / tmp_count) << 2) : 0);\
} while(0)
#define PACKET_ACCEPTED() do {\
if(packets_ok < ~0) {\
packets_ok++;\
}\
} while(0);
#else
#define PACKET_DROPPED()
#define PACKET_ACCEPTED()
#endif /* TR1001_STATISTICS */
/*---------------------------------------------------------------------------*/
/*
* Turn on data transmission in On-Off-Keyed mode.
*/
static void
txook(void)
{
P3SEL = 0xf0;
P5OUT |= 0x40;
P5OUT &= 0x7f;
}
/*---------------------------------------------------------------------------*/
/*
* Turn on data reception for the radio tranceiver.
*/
static void
rxon(void)
{
P3SEL = 0xe0;
P5OUT |= 0xc0;
/* Enable the receiver. */
ME1 |= URXE0;
/* Turn on receive interrupt. */
IE1 |= URXIE0;
}
/*---------------------------------------------------------------------------*/
/*
* Turn off data reception for the radio tranceiver.
*/
static void
rxoff(void)
{
P5OUT &= 0x3f;
/* Disable the receiver. */
ME1 &= ~URXE0;
/* Turn off receive interrupt. */
IE1 &= ~URXIE0;
}
/*---------------------------------------------------------------------------*/
/*
* Clear the recevie buffer and reset the receiver state.
*/
static void
rxclear(void)
{
tr1001_rxstate = RXSTATE_READY;
}
/*---------------------------------------------------------------------------*/
/*
* Turn TR1001 radio transceiver off.
*/
/*---------------------------------------------------------------------------*/
static int
tr1001_off(void)
{
if(onoroff == OFF) {
return 1;
}
onoroff = OFF;
rxoff();
rxclear();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
return 1;
}
/*---------------------------------------------------------------------------*/
/*
* Turn TR1001 radio transceiver on.
*/
/*---------------------------------------------------------------------------*/
static int
tr1001_on(void)
{
if(onoroff == ON) {
return 1;
}
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
onoroff = ON;
rxon();
rxclear();
return 1;
}
/*---------------------------------------------------------------------------*/
/*
* Send a byte of data over the radio.
*
* \param b The byte to be sent.
*/
static void
send(unsigned char b)
{
clock_time_t start;
start = clock_time();
/* Wait until the USART0 TX buffer is ready. */
while((IFG1 & UTXIFG0) == 0) {
/* Wait no more than one second. */
if((clock_time_t)(clock_time() - start) > (clock_time_t)CLOCK_SECOND) {
break;
}
}
/* Send the byte. */
TXBUF0 = b;
}
/*---------------------------------------------------------------------------*/
/*
* Send a byte of data and its logical negation (all bits inverted)
* over the radio.
*
* \param b The byte to be sent.
*/
/* static void */
/* send2(unsigned char b) */
/* { */
/* u16_t m; */
/* m = me_encode(b); */
/* send(m >> 8); */
/* send(m & 0xff); */
/* } */
/* static u16_t */
/* send2_crc16(unsigned char b, u16_t crcacc) */
/* { */
/* u16_t m; */
/* m = me_encode(b); */
/* send(m >> 8); */
/* send(m & 0xff); */
/* return crc16_add(b, crcacc); */
/* } */
static void
sendx(unsigned char b)
{
gcr_encode(b);
GCRLOG("(%02x)", b);
while(gcr_get_encoded(&b)) {
send(b);
GCRLOG("%02x ", b);
}
}
static u16_t
sendx_crc16(unsigned char b, u16_t crcacc)
{
gcr_encode(b);
GCRLOG("(%02x)", b);
crcacc = crc16_add(b, crcacc);
while(gcr_get_encoded(&b)) {
send(b);
GCRLOG("C%02x ", b);
}
return crcacc;
}
/*---------------------------------------------------------------------------*/
void
tr1001_set_txpower(unsigned char p)
{
int i;
/* Clamp maximum power. */
if(p > 100) {
p = 100;
}
/* First, run the potentiometer down to zero so that we know the
start value of the potentiometer. */
P2OUT &= 0xDF; /* P25 = 0 (down selected) */
P2OUT &= 0xBF; /* P26 = 0 (chipselect on) */
for(i = 0; i < 102; ++i) {
P2OUT &= 0xEF; /* P24 = 0 (inc) */
P2OUT |= 0x10;
}
/* Now, start to increase the value of the potentiometer until it
reaches the desired value.*/
P2OUT |= 0x20; /* P25 = 1 (up selected) */
for(i = 0; i < p; ++i) {
P2OUT &= 0xEF; /* P24 = 0 (inc) */
P2OUT |= 0x10;
}
P2OUT |= 0x40; /* P26 = 1 (chipselect off) */
}
/*---------------------------------------------------------------------------*/
static void
tr1001_set_receiver(void (* recv)(const struct radio_driver *))
{
receiver_callback = recv;
}
/*---------------------------------------------------------------------------*/
void
tr1001_init()
{
PT_INIT(&rxhandler_pt);
#if TR1001_STATISTICS
packets_ok = packets_err = 0;
sstrength_dropped = 0;
sstrength_min = 0xFFFF;
sstrength_max = 0;
#endif /* TR1001_STATISTICS */
onoroff = OFF;
UCTL0 = CHAR; /* 8-bit character */
UTCTL0 = SSEL1; /* UCLK = SMCLK */
tr1001_set_speed(TR1001_19200);
ME1 |= UTXE0 + URXE0; /* Enable USART0 TXD/RXD */
/* Turn on receive interrupt. */
IE1 |= URXIE0;
timer_set(&rxtimer, CLOCK_SECOND / 4);
tr1001_on();
tr1001_set_txpower(100);
/* Reset reception state. */
rxclear();
process_start(&tr1001_process, NULL);
}
/*---------------------------------------------------------------------------*/
interrupt (UART0RX_VECTOR)
tr1001_rxhandler(void)
{
ENERGEST_ON(ENERGEST_TYPE_IRQ);
tr1001_default_rxhandler_pt(RXBUF0);
if(tr1001_rxstate == RXSTATE_FULL) {
LPM4_EXIT;
}
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
static void
dump_packet(int len)
{
int i;
for(i = 0; i < len; ++i) {
LOG("%d: 0x%02x\n", i, tr1001_rxbuf[i]);
}
}
/*---------------------------------------------------------------------------*/
PT_THREAD(tr1001_default_rxhandler_pt(unsigned char incoming_byte))
{
static unsigned char rxtmp, tmppos;
if(timer_expired(&rxtimer) && tr1001_rxstate != RXSTATE_FULL) {
PT_INIT(&rxhandler_pt);
}
timer_restart(&rxtimer);
if(tr1001_rxstate == RXSTATE_RECEVING) {
unsigned short signal = radio_sensor.value(0);;
tmp_sstrength += (signal >> 2);
tmp_count++;
if(signal < tmp_sstrength_min) {
tmp_sstrength_min = signal;
}
if(signal > tmp_sstrength_max) {
tmp_sstrength_max = signal;
}
}
PT_BEGIN(&rxhandler_pt);
while(1) {
/* Reset reception state. */
rxclear();
/* Wait until we receive the first syncronization byte. */
PT_WAIT_UNTIL(&rxhandler_pt, incoming_byte == SYNCH1);
tr1001_rxstate = RXSTATE_RECEVING;
/* Read all incoming syncronization bytes. */
PT_WAIT_WHILE(&rxhandler_pt, incoming_byte == SYNCH1);
/* We should receive the second synch byte by now, otherwise we'll
restart the protothread. */
if(incoming_byte != SYNCH2) {
PT_RESTART(&rxhandler_pt);
}
/* Start signal strength measurement */
tmp_sstrength = 0;
tmp_count = 0;
tmp_sstrength_max = 0;
tmp_sstrength_min = 0xFFFF;
/* Reset the CRC. */
rxcrc = 0xffff;
gcr_init();
GCRLOG("RECV: ");
/* Read packet header. */
for(tmppos = 0; tmppos < TR1001_HDRLEN; ++tmppos) {
/* Wait for the first byte of the packet to arrive. */
do {
PT_YIELD(&rxhandler_pt);
GCRLOG("(%02x) ", incoming_byte);
gcr_decode(incoming_byte);
/* If the incoming byte isn't a valid GCR encoded byte,
we start again from the beginning. */
if(!gcr_valid()) {
beep_beep(1000);
LOG("Incorrect GCR in header at byte %d/1 %x\n", tmppos, incoming_byte);
PACKET_DROPPED();
PT_RESTART(&rxhandler_pt);
}
} while(!gcr_get_decoded(&rxtmp));
GCRLOG("%02x ", rxtmp);
tr1001_rxbuf[tmppos] = rxtmp;
/* Calculate the CRC. */
rxcrc = crc16_add(rxtmp, rxcrc);
}
/* Since we've got the header, we can grab the length from it. */
tr1001_rxlen = ((((struct tr1001_hdr *)tr1001_rxbuf)->len[0] << 8) +
((struct tr1001_hdr *)tr1001_rxbuf)->len[1]);
/* If the length is longer than we can handle, we'll start from
the beginning. */
if(tmppos + tr1001_rxlen > sizeof(tr1001_rxbuf)) {
PACKET_DROPPED();
PT_RESTART(&rxhandler_pt);
}
/* Read packet data. */
for(; tmppos < tr1001_rxlen + TR1001_HDRLEN; ++tmppos) {
/* Wait for the first byte of the packet to arrive. */
do {
PT_YIELD(&rxhandler_pt);
GCRLOG("(%02x)", incoming_byte);
gcr_decode(incoming_byte);
/* If the incoming byte isn't a valid Manchester encoded byte,
we start again from the beinning. */
if(!gcr_valid()) {
beep_beep(1000);
LOG("Incorrect GCR 0x%02x at byte %d/1\n", incoming_byte,
tmppos - TR1001_HDRLEN);
PACKET_DROPPED();
PT_RESTART(&rxhandler_pt);
}
} while(!gcr_get_decoded(&rxtmp));
GCRLOG("%02x ", rxtmp);
tr1001_rxbuf[tmppos] = rxtmp;
/* Calculate the CRC. */
rxcrc = crc16_add(rxtmp, rxcrc);
}
/* Read the frame CRC. */
for(tmppos = 0; tmppos < 2; ++tmppos) {
do {
PT_YIELD(&rxhandler_pt);
GCRLOG("(%02x)", incoming_byte);
gcr_decode(incoming_byte);
if(!gcr_valid()) {
beep_beep(1000);
PACKET_DROPPED();
PT_RESTART(&rxhandler_pt);
}
} while(!gcr_get_decoded(&rxtmp));
GCRLOG("%02x ", rxtmp);
rxcrctmp = (rxcrctmp << 8) | rxtmp;
}
GCRLOG("\n");
if(rxcrctmp == rxcrc) {
/* A full packet has been received and the CRC checks out. We'll
request the driver to take care of the incoming data. */
PACKET_ACCEPTED();
process_poll(&tr1001_process);
/* We'll set the receive state flag to signal that a full frame
is present in the buffer, and we'll wait until the buffer has
been taken care of. */
tr1001_rxstate = RXSTATE_FULL;
PT_WAIT_UNTIL(&rxhandler_pt, tr1001_rxstate != RXSTATE_FULL);
} else {
LOG("Incorrect CRC\n");
beep_beep(1000);
PACKET_DROPPED();
}
}
PT_END(&rxhandler_pt);
}
/*---------------------------------------------------------------------------*/
/*
* Prepare a transmission.
*
* This function does the necessary setup before a packet can be sent
* out.
*/
static void
prepare_transmission(int synchbytes)
{
int i;
/* Delay the transmission for a short random duration. */
clock_delay(random_rand() & 0x3ff);
/* Check that we don't currently are receiveing a packet, and if so
we wait until the reception has been completed. Reception is done
with interrupts so it is OK for us to wait in a while() loop. */
while(tr1001_rxstate == RXSTATE_RECEVING &&
!timer_expired(&rxtimer)) {
/* Delay the transmission for a short random duration. */
clock_delay(random_rand() & 0x7ff);
}
/* Turn on OOK mode with transmission. */
txook();
/* According to the datasheet, the transmitter must wait for 12 us
in order to settle. Empirical tests show that is it better to
wait for something like 283 us... */
clock_delay(200);
/* Transmit preamble and synch bytes. */
for(i = 0; i < 20; ++i) {
send(0xaa);
}
/* send(0xaa);
send(0xaa);*/
send(0xff);
for(i = 0; i < synchbytes; ++i) {
send(SYNCH1);
}
send(SYNCH2);
}
/*---------------------------------------------------------------------------*/
int
tr1001_send(const void *packet, unsigned short len)
{
int i;
u16_t crc16;
LOG("tr1001_send: sending %d bytes\n", len);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
/* Prepare the transmission. */
prepare_transmission(NUM_SYNCHBYTES);
radio_active = 1;
crc16 = 0xffff;
gcr_init();
GCRLOG("SEND: ");
/* Send packet header. */
crc16 = sendx_crc16(len >> 8, crc16);
crc16 = sendx_crc16(len & 0xff, crc16);
/* Send packet data. */
for(i = 0; i < len; ++i) {
crc16 = sendx_crc16(((u8_t *)packet)[i], crc16);
}
/* Send CRC */
sendx(crc16 >> 8);
sendx(crc16 & 0xff);
/* if not encoding has sent all bytes - let it send another GCR specific */
if (!gcr_finished()) {
sendx(0);
}
GCRLOG("\n");
/* Send trailing bytes. */
send(0x33);
send(0xcc);
send(0x33);
send(0xcc);
/* Turn on (or off) reception again. */
if(onoroff == ON) {
rxon();
rxclear();
} else {
rxoff();
rxclear();
}
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
return 0;
}
/*---------------------------------------------------------------------------*/
int
tr1001_read(void *buf, unsigned short bufsize)
{
unsigned short tmplen;
if(tr1001_rxstate == RXSTATE_FULL) {
dump_packet(tr1001_rxlen + 2);
tmplen = tr1001_rxlen;
if(tmplen > bufsize) {
tmplen = bufsize;
}
memcpy(buf, &tr1001_rxbuf[TR1001_HDRLEN], tmplen);
/* header + content + CRC */
/* sstrength = (tmp_sstrength / (TR1001_HDRLEN + tr1001_rxlen + 2)) << 1; */
sstrength = (tmp_count ? ((tmp_sstrength / tmp_count) << 2) : 0);
sstrength_max = tmp_sstrength_max;
sstrength_min = tmp_sstrength_min;
rxclear();
LOG("tr1001_read: got %d bytes\n", tmplen);
return tmplen;
}
return 0;
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(tr1001_process, ev, data)
{
PROCESS_BEGIN();
/* Reset reception state now that the process is ready to receive data. */
rxclear();
while(1) {
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
if(receiver_callback != NULL) {
receiver_callback(&tr1001_driver);
} else {
LOG("tr1001 has no receive function\n");
/* Perform a dummy read to drop the message. */
tr1001_read((u8_t *) &data, 0);
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
void
tr1001_set_speed(unsigned char speed)
{
if(speed == TR1001_19200) {
/* Set TR1001 to 19200 */
UBR00 = 0x80; /* 2,457MHz/19200 = 128 -> 0x80 */
UBR10 = 0x00; /* */
UMCTL0 = 0x00; /* no modulation */
} else if(speed == TR1001_38400) {
/* Set TR1001 to 38400 */
UBR00 = 0x40; /* 2,457MHz/38400 = 64 -> 0x40 */
UBR10 = 0x00; /* */
UMCTL0 = 0x00; /* no modulation */
} else if(speed == TR1001_57600) {
UBR00 = 0x2a; /* 2,457MHz/57600 = 42.7 -> 0x2A */
UBR10 = 0x00; /* */
UMCTL0 = 0x5b; /* */
} else if(speed == TR1001_115200) {
UBR00 = 0x15; /* 2,457MHz/115200 = 21.4 -> 0x15 */
UBR10 = 0x00; /* */
UMCTL0 = 0x4a; /* */
} else {
tr1001_set_speed(TR1001_19200);
}
}
/*---------------------------------------------------------------------------*/
unsigned short
tr1001_sstrength(void)
{
return sstrength;
}
/*---------------------------------------------------------------------------*/
#if TR1001_STATISTICS
unsigned short
tr1001_packets_ok(void)
{
return packets_ok;
}
#endif /* TR1001_STATISTICS */
/*---------------------------------------------------------------------------*/
#if TR1001_STATISTICS
unsigned short
tr1001_packets_dropped(void)
{
return packets_err;
}
#endif /* TR1001_STATISTICS */
/*---------------------------------------------------------------------------*/
#if TR1001_STATISTICS
void
tr1001_clear_packets(void)
{
packets_ok = packets_err = 0;
}
#endif /* TR1001_STATISTICS */
/*---------------------------------------------------------------------------*/
#if TR1001_STATISTICS
unsigned short
tr1001_sstrength_value(unsigned int type)
{
switch(type) {
case TR1001_SSTRENGTH_DROPPED:
return sstrength_dropped;
case TR1001_SSTRENGTH_MAX:
return sstrength_max;
case TR1001_SSTRENGTH_MIN:
return sstrength_min < sstrength_max ? sstrength_min : 0;
default:
return 0;
}
}
#endif /* TR1001_STATISTICS */
/*---------------------------------------------------------------------------*/
unsigned char
tr1001_active(void)
{
return radio_active;
}
/*--------------------------------------------------------------------------*/
void
tr1001_clear_active(void)
{
radio_active = 0;
}
/*--------------------------------------------------------------------------*/
/** @} */
/** @} */
Reference in New Issue View Git Blame Copy Permalink