nes-proj/arch/platform/zoul/dev/motion-sensor.c

129 lines
4.8 KiB
C

/*
* Copyright (c) 2015, Zolertia <http://www.zolertia.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup zoul-motion-sensor
* @{
*
* \file
* Digital motion sensor driver
* \author
* Antonio Lignan <alinan@zolertia.com>
*/
/*---------------------------------------------------------------------------*/
#include <stdio.h>
#include "contiki.h"
#include "dev/i2c.h"
#include "dev/motion-sensor.h"
#include "lib/sensors.h"
#include "dev/sys-ctrl.h"
#include "dev/gpio.h"
#include "dev/ioc.h"
/*---------------------------------------------------------------------------*/
#define DEBUG 0
#if DEBUG
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
#define MOTION_SENSOR_PORT_BASE GPIO_PORT_TO_BASE(MOTION_SENSOR_PORT)
#define MOTION_SENSOR_PIN_MASK GPIO_PIN_MASK(MOTION_SENSOR_PIN)
/*---------------------------------------------------------------------------*/
void (*presence_int_callback)(uint8_t value);
/*---------------------------------------------------------------------------*/
PROCESS(motion_int_process, "Motion interrupt process handler");
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(motion_int_process, ev, data)
{
PROCESS_EXITHANDLER();
PROCESS_BEGIN();
while(1) {
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
presence_int_callback(0);
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
static void
motion_interrupt_handler(uint8_t port, uint8_t pin)
{
process_poll(&motion_int_process);
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
return MOTION_SUCCESS;
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
return GPIO_READ_PIN(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int value)
{
if(type != MOTION_ACTIVE) {
PRINTF("Motion: invalid configuration option\n");
return MOTION_ERROR;
}
if(!value) {
presence_int_callback = NULL;
GPIO_DISABLE_INTERRUPT(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
return MOTION_SUCCESS;
}
/* Configure interruption */
GPIO_SOFTWARE_CONTROL(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
GPIO_SET_INPUT(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
GPIO_DETECT_RISING(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
GPIO_TRIGGER_SINGLE_EDGE(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
ioc_set_over(MOTION_SENSOR_PORT, MOTION_SENSOR_PIN, IOC_OVERRIDE_DIS);
gpio_register_callback(motion_interrupt_handler, MOTION_SENSOR_PORT,
MOTION_SENSOR_PIN);
process_start(&motion_int_process, NULL);
GPIO_ENABLE_INTERRUPT(MOTION_SENSOR_PORT_BASE, MOTION_SENSOR_PIN_MASK);
NVIC_EnableIRQ(MOTION_SENSOR_VECTOR);
return MOTION_SUCCESS;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(motion_sensor, MOTION_SENSOR, value, configure, status);
/*---------------------------------------------------------------------------*/
/** @} */