nes-proj/platform/sky/contiki-sky-main.c

253 lines
6.9 KiB
C

/*
* Copyright (c) 2006, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)$Id: contiki-sky-main.c,v 1.14 2007/11/10 20:44:30 adamdunkels Exp $
*/
#include <signal.h>
#include <stdio.h>
#include <string.h>
#include <io.h>
#include "contiki.h"
#include "dev/button-sensor.h"
#include "dev/ds2411.h"
#include "dev/sht11.h"
#include "dev/leds.h"
#include "dev/light.h"
#include "dev/xmem.h"
#include "dev/simple-cc2420.h"
#include "dev/slip.h"
#include "dev/uart1.h"
#include "net/mac/xmac.h"
#include "net/mac/cxmac.h"
#include "net/mac/nullmac.h"
#include "node-id.h"
#include "sys/profile.h"
#include "net/rime.h"
#include "sys/autostart.h"
/*#include "codeprop/codeprop.h"*/
SENSORS(&button_sensor);
#define WITH_UIP 0
#if WITH_UIP
static struct uip_fw_netif slipif =
{UIP_FW_NETIF(192,168,1,2, 255,255,255,255, slip_send)};
#endif /* WITH_UIP */
#ifdef EXPERIMENT_SETUP
#include "experiment-setup.h"
#endif
/*---------------------------------------------------------------------------*/
#if 0
int
force_float_inclusion()
{
extern int __fixsfsi;
extern int __floatsisf;
extern int __mulsf3;
extern int __subsf3;
return __fixsfsi + __floatsisf + __mulsf3 + __subsf3;
}
#endif
/*---------------------------------------------------------------------------*/
void uip_log(char *msg) { puts(msg); }
/*---------------------------------------------------------------------------*/
/* Radio stuff in network byte order. */
static u16_t panId = 0x2024;
#define RF_CHANNEL 26
/*---------------------------------------------------------------------------*/
void
force_inclusion(int d1, int d2)
{
snprintf(NULL, 0, "%d", d1 % d2);
}
/*---------------------------------------------------------------------------*/
static void
set_rime_addr(void)
{
rimeaddr_t addr;
addr.u16[0] = node_id;
rimeaddr_set_node_addr(&addr);
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200)); /* Must come before first printf */
#else /* WITH_UIP */
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
#endif /* WITH_UIP */
printf("Starting %s "
"($Id: contiki-sky-main.c,v 1.14 2007/11/10 20:44:30 adamdunkels Exp $)\n", __FILE__);
leds_on(LEDS_GREEN);
ds2411_init();
sensors_light_init();
sht11_init();
leds_on(LEDS_BLUE);
xmem_init();
leds_off(LEDS_RED);
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
node_id_restore();
leds_off(LEDS_BLUE);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7]);
#if WITH_UIP
uip_init();
uip_sethostaddr(&slipif.ipaddr);
uip_setnetmask(&slipif.netmask);
uip_fw_default(&slipif); /* Point2point, no default router. */
tcpip_set_forwarding(0);
#endif /* WITH_UIP */
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
process_start(&sensors_process, NULL);
#if PROFILE_CONF_ON
profile_init();
#endif /* PROFILE_CONF_ON */
ctimer_init();
leds_off(LEDS_GREEN);
set_rime_addr();
simple_cc2420_init();
simple_cc2420_set_chan_pan_addr(RF_CHANNEL, panId, 0 /*XXX*/, ds2411_id);
/* rime_init(nullmac_init(&simple_cc2420_driver));*/
rime_init(xmac_init(&simple_cc2420_driver));
/* rimeaddr_set_node_addr*/
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
#endif /* WITH_UIP */
button_sensor.activate();
printf("Autostarting processes\n");
autostart_start((struct process **) autostart_processes);
energest_init();
/*
* This is the scheduler loop.
*/
printf("process_run()...\n");
ENERGEST_ON(ENERGEST_TYPE_CPU);
while (1) {
int r;
#if PROFILE_CONF_ON
profile_episode_start();
#endif /* PROFILE_CONF_ON */
do {
/* Reset watchdog. */
r = process_run();
} while(r > 0);
#if PROFILE_CONF_ON
profile_episode_end();
#endif /* PROFILE_CONF_ON */
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
if(process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
_BIS_SR(GIE | SCG0 | /*SCG1 |*/ CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
#if PROFILE_CONF_ON
profile_clear_timestamps();
#endif /* PROFILE_CONF_ON */
}
}
return 0;
}
/*---------------------------------------------------------------------------*/