nes-proj/platform/z1/dev/z1-phidgets.c

155 lines
4.8 KiB
C

/*
* Copyright (c) 2010, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* $Id: z1-phidgets.c,v 1.3 2010/11/05 10:31:57 joxe Exp $
*
* -----------------------------------------------------------------
*
* Author : Joakim Eriksson
* Created : 2010-02-02
* Updated : $Date: 2010/11/05 10:31:57 $
* $Revision: 1.3 $
*/
#include <io.h>
#include "contiki.h"
#include "lib/sensors.h"
#include "dev/z1-phidgets.h"
static uint8_t adc_on;
static uint8_t active;
/*---------------------------------------------------------------------------*/
static void
sensors_activate(uint8_t type)
{
uint8_t pre = adc_on;
adc_on |= type;
if(pre == 0 && adc_on > 0) {
P6DIR = 0xff;
P6OUT = 0x00;
P6SEL |= 0x8b; /* bit 7 + 3 + 1 + 0 */
/* if nothing was started before, start up the ADC system */
/* Set up the ADC. */
ADC12CTL0 = REF2_5V + SHT0_6 + SHT1_6 + MSC; /* Setup ADC12, ref., sampling time */
ADC12CTL1 = SHP + CONSEQ_3 + CSTARTADD_0; /* Use sampling timer, repeat-sequenc-of-channels */
/* convert up to MEM4 */
ADC12MCTL4 |= EOS;
ADC12CTL0 |= ADC12ON + REFON;
ADC12CTL0 |= ENC; /* enable conversion */
ADC12CTL0 |= ADC12SC; /* sample & convert */
}
}
/*---------------------------------------------------------------------------*/
static void
sensors_deactivate(uint8_t type)
{
adc_on &= ~type;
if(adc_on == 0) {
/* stop converting immediately, turn off reference voltage, etc. */
/* wait for conversion to stop */
ADC12CTL0 &= ~ENC;
/* need to remove CONSEQ_3 if not EOS is configured */
ADC12CTL1 &= ~CONSEQ_3;
while(ADC12CTL1 & ADC12BUSY);
ADC12CTL0 = 0;
ADC12CTL1 = 0;
P6DIR = 0x00;
P6OUT = 0x00;
P6SEL = 0x00;
}
}
/*---------------------------------------------------------------------------*/
static int
value(int type)
{
/* ADC0 corresponds to the port under the logo, ADC1 to the port over the logo,
ADC2 and ADC3 corresponds to port on the JCreate bottom expansion port) */
switch(type) {
case PHIDGET5V_1:
return ADC12MEM0;
case PHIDGET5V_2:
return ADC12MEM1;
case PHIDGET3V_1:
return ADC12MEM2;
case PHIDGET3V_2:
return ADC12MEM3;
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int
status(int type)
{
switch(type) {
case SENSORS_ACTIVE:
case SENSORS_READY:
return active;
}
return 0;
}
/*---------------------------------------------------------------------------*/
static int
configure(int type, int c)
{
switch(type) {
case SENSORS_ACTIVE:
if(c) {
if(!status(SENSORS_ACTIVE)) {
/* SREF_1 is Vref+ */
/* MemReg6 == P6.0/A0 == 5V 1 */
ADC12MCTL0 = (INCH_0 + SREF_0);
/* MemReg7 == P6.3/A3 == 5V 2 */
ADC12MCTL1 = (INCH_3 + SREF_0);
/* MemReg8 == P6.1/A1 == 3V 1 */
ADC12MCTL2 = (INCH_1 + SREF_0);
/* MemReg9 == P6.7/A7 == 3V_2 */
ADC12MCTL3 = (INCH_7 + SREF_0);
sensors_activate(0x0F);
active = 1;
}
} else {
sensors_deactivate(0x0F);
active = 0;
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
SENSORS_SENSOR(phidgets, "Phidgets", value, configure, status);