nes-proj/arch/cpu/simplelink-cc13xx-cc26xx/rf/sched.c

729 lines
22 KiB
C

/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc13xx-cc26xx-rf-sched
* @{
*
* \file
* Implementation of the CC13xx/CC26xx RF scheduler.
* \author
* Edvard Pettersen <e.pettersen@ti.com>
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "dev/watchdog.h"
#include "sys/cc.h"
#include "sys/etimer.h"
#include "sys/process.h"
#include "sys/energest.h"
#include "net/netstack.h"
#include "net/packetbuf.h"
#include "net/mac/mac.h"
#include "lib/random.h"
/*---------------------------------------------------------------------------*/
#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_ble_mailbox.h)
#include <ti/drivers/rf/RF.h>
/*---------------------------------------------------------------------------*/
#include "rf/rf.h"
#include "rf/sched.h"
#include "rf/data-queue.h"
#include "rf/settings.h"
/*---------------------------------------------------------------------------*/
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
/*---------------------------------------------------------------------------*/
/* Log configuration */
#include "sys/log.h"
#define LOG_MODULE "Radio"
#define LOG_LEVEL LOG_LEVEL_NONE
/*---------------------------------------------------------------------------*/
#define CMD_FS_RETRIES 3
#define RF_EVENTS_CMD_DONE (RF_EventCmdDone | RF_EventLastCmdDone | \
RF_EventFGCmdDone | RF_EventLastFGCmdDone)
#define CMD_STATUS(cmd) (CC_ACCESS_NOW(RF_Op, cmd).status)
#define CMD_HANDLE_OK(handle) (((handle) != RF_ALLOC_ERROR) && \
((handle) != RF_SCHEDULE_CMD_ERROR))
#define EVENTS_CMD_DONE(events) (((events) & RF_EVENTS_CMD_DONE) != 0)
/*---------------------------------------------------------------------------*/
/* BLE advertisement channel range (inclusive) */
#define BLE_ADV_CHANNEL_MIN 37
#define BLE_ADV_CHANNEL_MAX 39
/* Number of BLE advertisement channels */
#define NUM_BLE_ADV_CHANNELS (BLE_ADV_CHANNEL_MAX - BLE_ADV_CHANNEL_MIN + 1)
/*---------------------------------------------------------------------------*/
/* Synth re-calibration every 3 minutes */
#define SYNTH_RECAL_INTERVAL (CLOCK_SECOND * 60 * 3)
/* Set re-calibration interval with a jitter of 10 seconds */
#define SYNTH_RECAL_JITTER (CLOCK_SECOND * 10)
static struct etimer synth_recal_timer;
/*---------------------------------------------------------------------------*/
#if (DeviceFamily_PARENT == DeviceFamily_PARENT_CC13X0_CC26X0)
typedef rfc_CMD_BLE_ADV_NC_t ble_cmd_adv_nc_t;
#elif (DeviceFamily_PARENT == DeviceFamily_PARENT_CC13X2_CC26X2)
typedef rfc_CMD_BLE5_ADV_NC_t ble_cmd_adv_nc_t;
#endif
/*---------------------------------------------------------------------------*/
static RF_Object rf_netstack;
#if RF_CONF_BLE_BEACON_ENABLE
static RF_Object rf_ble;
#endif
static RF_CmdHandle cmd_rx_handle;
static bool rf_is_on;
static volatile bool rx_buf_full;
/*---------------------------------------------------------------------------*/
static void
cmd_rx_cb(RF_Handle client, RF_CmdHandle command, RF_EventMask events)
{
/* Unused arguments */
(void)client;
(void)command;
if(events & RF_EventRxEntryDone) {
process_poll(&rf_sched_process);
}
if(events & RF_EventRxBufFull) {
rx_buf_full = true;
process_poll(&rf_sched_process);
}
}
/*---------------------------------------------------------------------------*/
static inline clock_time_t
synth_recal_interval(void)
{
/*
* Add jitter centered around SYNTH_RECAL_INTERVAL, giving a plus/minus
* jitter seconds halved.
*/
return SYNTH_RECAL_INTERVAL + (random_rand() % SYNTH_RECAL_JITTER) - (SYNTH_RECAL_JITTER / 2);
}
/*---------------------------------------------------------------------------*/
static inline bool
cmd_rx_is_active(void)
{
/*
* Active in this case means RX command is either running to be running,
* that is ACTIVE for running or PENDING for to be running.
*/
const uint16_t status = CMD_STATUS(netstack_cmd_rx);
return (status == ACTIVE) ||
(status == PENDING);
}
/*---------------------------------------------------------------------------*/
static uint_fast8_t
cmd_rx_disable(void)
{
const bool is_active = cmd_rx_is_active();
if(is_active) {
CMD_STATUS(netstack_cmd_rx) = DONE_STOPPED;
RF_cancelCmd(&rf_netstack, cmd_rx_handle, RF_ABORT_GRACEFULLY);
cmd_rx_handle = 0;
}
return (uint_fast8_t)is_active;
}
/*---------------------------------------------------------------------------*/
static rf_result_t
cmd_rx_restore(uint_fast8_t rx_key)
{
const bool was_active = (rx_key != 0) ? true : false;
if(!was_active) {
return RF_RESULT_OK;
}
RF_ScheduleCmdParams sched_params;
RF_ScheduleCmdParams_init(&sched_params);
sched_params.priority = RF_PriorityNormal;
sched_params.endTime = 0;
sched_params.allowDelay = RF_AllowDelayAny;
CMD_STATUS(netstack_cmd_rx) = PENDING;
cmd_rx_handle = RF_scheduleCmd(
&rf_netstack,
(RF_Op *)&netstack_cmd_rx,
&sched_params,
cmd_rx_cb,
RF_EventRxEntryDone | RF_EventRxBufFull);
if(!CMD_HANDLE_OK(cmd_rx_handle)) {
LOG_ERR("Unable to restore RX command, handle=%d status=0x%04x",
cmd_rx_handle, CMD_STATUS(netstack_cmd_rx));
return RF_RESULT_ERROR;
}
return RF_RESULT_OK;
}
/*---------------------------------------------------------------------------*/
rf_result_t
rf_yield(void)
{
/* Force abort of any ongoing RF operation */
RF_flushCmd(&rf_netstack, RF_CMDHANDLE_FLUSH_ALL, RF_ABORT_GRACEFULLY);
#if RF_CONF_BLE_BEACON_ENABLE
RF_flushCmd(&rf_ble, RF_CMDHANDLE_FLUSH_ALL, RF_ABORT_GRACEFULLY);
#endif
/* Trigger a manual power-down */
RF_yield(&rf_netstack);
#if RF_CONF_BLE_BEACON_ENABLE
RF_yield(&rf_ble);
#endif
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
etimer_stop(&synth_recal_timer);
rf_is_on = false;
return RF_RESULT_OK;
}
/*---------------------------------------------------------------------------*/
rf_result_t
rf_set_tx_power(RF_Handle handle, RF_TxPowerTable_Entry *table, int8_t dbm)
{
const RF_Stat stat = RF_setTxPower(handle, RF_TxPowerTable_findValue(table, dbm));
return (stat == RF_StatSuccess)
? RF_RESULT_OK
: RF_RESULT_ERROR;
}
/*---------------------------------------------------------------------------*/
rf_result_t
rf_get_tx_power(RF_Handle handle, RF_TxPowerTable_Entry *table, int8_t *dbm)
{
*dbm = RF_TxPowerTable_findPowerLevel(table, RF_getTxPower(handle));
return (*dbm != RF_TxPowerTable_INVALID_DBM)
? RF_RESULT_OK
: RF_RESULT_ERROR;
}
/*---------------------------------------------------------------------------*/
RF_Handle
netstack_open(RF_Params *params)
{
return RF_open(&rf_netstack, &netstack_mode, (RF_RadioSetup *)&netstack_cmd_radio_setup, params);
}
/*---------------------------------------------------------------------------*/
rf_result_t
netstack_sched_fs(void)
{
const uint_fast8_t rx_key = cmd_rx_disable();
/*
* For IEEE-mode, restarting CMD_IEEE_RX re-calibrates the synth by using the
* channel field in the CMD_IEEE_RX command. It is assumed this field is
* already configured before this function is called. However, if
* CMD_IEEE_RX wasn't active, manually calibrate the synth with CMD_FS.
*
* For Prop-mode, the synth is always manually calibrated with CMD_FS.
*/
#if (RF_MODE == RF_CORE_MODE_2_4_GHZ)
if(rx_key) {
cmd_rx_restore(rx_key);
return RF_RESULT_OK;
}
#endif /* RF_MODE == RF_CORE_MODE_2_4_GHZ */
RF_EventMask events;
bool synth_error = false;
uint8_t num_tries = 0;
do {
CMD_STATUS(netstack_cmd_fs) = PENDING;
events = RF_runCmd(
&rf_netstack,
(RF_Op *)&netstack_cmd_fs,
RF_PriorityNormal,
NULL,
0);
synth_error = (EVENTS_CMD_DONE(events)) && (CMD_STATUS(netstack_cmd_fs) == ERROR_SYNTH_PROG);
} while(synth_error && (num_tries++ < CMD_FS_RETRIES));
cmd_rx_restore(rx_key);
return (CMD_STATUS(netstack_cmd_fs) == DONE_OK)
? RF_RESULT_OK
: RF_RESULT_ERROR;
}
/*---------------------------------------------------------------------------*/
rf_result_t
netstack_sched_ieee_tx(bool ack_request)
{
rf_result_t res;
RF_ScheduleCmdParams sched_params;
RF_ScheduleCmdParams_init(&sched_params);
sched_params.priority = RF_PriorityNormal;
sched_params.endTime = 0;
sched_params.allowDelay = RF_AllowDelayAny;
const bool rx_is_active = cmd_rx_is_active();
const bool rx_needed = (ack_request && !rx_is_active);
/*
* If we expect ACK after transmission, RX must be running to be able to
* run the RX_ACK command. Therefore, turn on RX before starting the
* chained TX command.
*/
if(rx_needed) {
res = netstack_sched_rx(false);
if(res != RF_RESULT_OK) {
return res;
}
}
CMD_STATUS(netstack_cmd_tx) = PENDING;
RF_CmdHandle tx_handle = RF_scheduleCmd(
&rf_netstack,
(RF_Op *)&netstack_cmd_tx,
&sched_params,
NULL,
0);
if(!CMD_HANDLE_OK(tx_handle)) {
LOG_ERR("Unable to schedule TX command, handle=%d status=0x%04x\n",
tx_handle, CMD_STATUS(netstack_cmd_tx));
return RF_RESULT_ERROR;
}
if(rx_is_active) {
ENERGEST_SWITCH(ENERGEST_TYPE_LISTEN, ENERGEST_TYPE_TRANSMIT);
} else {
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
}
/* Wait until TX operation finishes */
RF_EventMask tx_events = RF_pendCmd(&rf_netstack, tx_handle, 0);
/* Stop RX if it was turned on only for ACK */
if(rx_needed) {
netstack_stop_rx();
}
if(rx_is_active) {
ENERGEST_SWITCH(ENERGEST_TYPE_TRANSMIT, ENERGEST_TYPE_LISTEN);
} else {
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
}
if(!EVENTS_CMD_DONE(tx_events)) {
LOG_ERR("Pending on TX comand generated error, events=0x%08llx status=0x%04x\n",
tx_events, CMD_STATUS(netstack_cmd_tx));
return RF_RESULT_ERROR;
}
return RF_RESULT_OK;
}
/*---------------------------------------------------------------------------*/
rf_result_t
netstack_sched_prop_tx(void)
{
RF_ScheduleCmdParams sched_params;
RF_ScheduleCmdParams_init(&sched_params);
sched_params.priority = RF_PriorityNormal;
sched_params.endTime = 0;
sched_params.allowDelay = RF_AllowDelayAny;
CMD_STATUS(netstack_cmd_tx) = PENDING;
RF_CmdHandle tx_handle = RF_scheduleCmd(
&rf_netstack,
(RF_Op *)&netstack_cmd_tx,
&sched_params,
NULL,
0);
if(!CMD_HANDLE_OK(tx_handle)) {
LOG_ERR("Unable to schedule TX command, handle=%d status=0x%04x\n",
tx_handle, CMD_STATUS(netstack_cmd_tx));
return RF_RESULT_ERROR;
}
/*
* Prop TX requires any on-going RX operation to be stopped to be
* able to transmit. Therefore, disable RX if running.
*/
const bool rx_key = cmd_rx_disable();
if(rx_key) {
ENERGEST_SWITCH(ENERGEST_TYPE_LISTEN, ENERGEST_TYPE_TRANSMIT);
} else {
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
}
/* Wait until TX operation finishes */
RF_EventMask tx_events = RF_pendCmd(&rf_netstack, tx_handle, 0);
cmd_rx_restore(rx_key);
if(rx_key) {
ENERGEST_SWITCH(ENERGEST_TYPE_TRANSMIT, ENERGEST_TYPE_LISTEN);
} else {
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
}
if(!EVENTS_CMD_DONE(tx_events)) {
LOG_ERR("Pending on scheduled TX command generated error, events=0x%08llx status=0x%04x\n",
tx_events, CMD_STATUS(netstack_cmd_tx));
return RF_RESULT_ERROR;
}
return RF_RESULT_OK;
}
/*---------------------------------------------------------------------------*/
rf_result_t
netstack_sched_rx(bool start)
{
if(cmd_rx_is_active()) {
LOG_WARN("Already in RX when scheduling RX\n");
return RF_RESULT_OK;
}
RF_ScheduleCmdParams sched_params;
RF_ScheduleCmdParams_init(&sched_params);
sched_params.priority = RF_PriorityNormal;
sched_params.endTime = 0;
sched_params.allowDelay = RF_AllowDelayAny;
CMD_STATUS(netstack_cmd_rx) = PENDING;
cmd_rx_handle = RF_scheduleCmd(
&rf_netstack,
(RF_Op *)&netstack_cmd_rx,
&sched_params,
cmd_rx_cb,
RF_EventRxEntryDone | RF_EventRxBufFull);
if(!CMD_HANDLE_OK(cmd_rx_handle)) {
LOG_ERR("Unable to schedule RX command, handle=%d status=0x%04x\n",
cmd_rx_handle, CMD_STATUS(netstack_cmd_rx));
return RF_RESULT_ERROR;
}
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
if(start) {
rf_is_on = true;
process_poll(&rf_sched_process);
}
return RF_RESULT_OK;
}
/*---------------------------------------------------------------------------*/
rf_result_t
netstack_stop_rx(void)
{
if(!cmd_rx_is_active()) {
LOG_WARN("RX not active when stopping RX\n");
return RF_RESULT_OK;
}
CMD_STATUS(netstack_cmd_rx) = DONE_STOPPED;
const RF_Stat stat = RF_cancelCmd(&rf_netstack, cmd_rx_handle, RF_ABORT_GRACEFULLY);
cmd_rx_handle = 0;
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
return (stat == RF_StatSuccess)
? RF_RESULT_OK
: RF_RESULT_ERROR;
}
/*---------------------------------------------------------------------------*/
RF_Handle
ble_open(RF_Params *params)
{
#if RF_CONF_BLE_BEACON_ENABLE
return RF_open(&rf_ble, &ble_mode, (RF_RadioSetup *)&ble_cmd_radio_setup, params);
#else
return (RF_Handle)NULL;
#endif
}
/*---------------------------------------------------------------------------*/
#if RF_CONF_BLE_BEACON_ENABLE
static RF_Op *
init_ble_adv_array(ble_cmd_adv_nc_t *ble_adv_array, uint8_t bm_channel)
{
RF_Op *first_ble_adv = NULL;
ble_cmd_adv_nc_t *cmd_adv_37 = &ble_adv_array[0];
ble_cmd_adv_nc_t *cmd_adv_38 = &ble_adv_array[1];
ble_cmd_adv_nc_t *cmd_adv_39 = &ble_adv_array[2];
/* Setup channel 37 advertisement if enabled */
if(bm_channel & BLE_ADV_CHANNEL_37) {
/* Default configurations from ble_cmd_adv_nc */
memcpy(cmd_adv_37, &ble_cmd_adv_nc, sizeof(ble_cmd_adv_nc));
cmd_adv_37->channel = 37;
/* Magic number: initialization for whitener, specific for channel 37 */
cmd_adv_37->whitening.init = 0x65;
/*
* The next advertisement is chained depending on whether they are
* enbled or not. If both 38 and 39 are disabled, then there is no
* chaining.
*/
if(bm_channel & BLE_ADV_CHANNEL_38) {
cmd_adv_37->pNextOp = (RF_Op *)cmd_adv_38;
cmd_adv_37->condition.rule = COND_ALWAYS;
} else if(bm_channel & BLE_ADV_CHANNEL_39) {
cmd_adv_37->pNextOp = (RF_Op *)cmd_adv_39;
cmd_adv_37->condition.rule = COND_ALWAYS;
} else {
cmd_adv_37->pNextOp = NULL;
cmd_adv_37->condition.rule = COND_NEVER;
}
/* Channel 37 will always be first if enabled */
first_ble_adv = (RF_Op *)cmd_adv_37;
}
/* Setup channel 38 advertisement if enabled */
if(bm_channel & BLE_ADV_CHANNEL_38) {
memcpy(cmd_adv_38, &ble_cmd_adv_nc, sizeof(ble_cmd_adv_nc));
cmd_adv_38->channel = 38;
/* Magic number: initialization for whitener, specific for channel 38 */
cmd_adv_38->whitening.init = 0x66;
/*
* The next advertisement is chained depending on whether they are
* enbled or not. If 39 is disabled, then there is no chaining.
*/
if(bm_channel & BLE_ADV_CHANNEL_39) {
cmd_adv_38->pNextOp = (RF_Op *)cmd_adv_39;
cmd_adv_38->condition.rule = COND_ALWAYS;
} else {
cmd_adv_38->pNextOp = NULL;
cmd_adv_38->condition.rule = COND_NEVER;
}
/*
* Channel 38 is only first if the first_ble_adv pointer is not
* set by channel 37.
*/
if(first_ble_adv == NULL) {
first_ble_adv = (RF_Op *)cmd_adv_38;
}
}
/* Setup channel 39 advertisement if enabled */
if(bm_channel & BLE_ADV_CHANNEL_39) {
memcpy(cmd_adv_39, &ble_cmd_adv_nc, sizeof(ble_cmd_adv_nc));
cmd_adv_39->channel = 39;
/* Magic number: initialization for whitener, specific for channel 39 */
cmd_adv_39->whitening.init = 0x67;
/* Channel 39 is always the last advertisement in the chain */
cmd_adv_39->pNextOp = NULL;
cmd_adv_39->condition.rule = COND_NEVER;
/*
* Channel 39 is only first if the first_ble_adv pointer is not
* set by channel 37 or channel 38.
*/
if(first_ble_adv == NULL) {
first_ble_adv = (RF_Op *)cmd_adv_39;
}
}
return first_ble_adv;
}
#endif /* RF_CONF_BLE_BEACON_ENABLE */
/*---------------------------------------------------------------------------*/
rf_result_t
ble_sched_beacons(uint8_t bm_channel)
{
#if RF_CONF_BLE_BEACON_ENABLE
/*
* Allocate the advertisement commands on the stack rather than statically
* to RAM in order to save space. We don't need them after the
* advertisements have been transmitted.
*/
ble_cmd_adv_nc_t ble_cmd_adv_nc_array[NUM_BLE_ADV_CHANNELS];
RF_Op *initial_adv = NULL;
RF_ScheduleCmdParams sched_params;
RF_CmdHandle beacon_handle;
RF_EventMask beacon_events;
rf_result_t rf_result;
/* If no channels are mapped, then early return OK */
if((bm_channel & BLE_ADV_CHANNEL_ALL) == 0) {
return RF_RESULT_OK;
}
initial_adv = init_ble_adv_array(ble_cmd_adv_nc_array, bm_channel);
if(initial_adv == NULL) {
LOG_ERR("Initializing BLE Advertisement chain failed\n");
return RF_RESULT_ERROR;
}
RF_ScheduleCmdParams_init(&sched_params);
sched_params.priority = RF_PriorityNormal;
sched_params.endTime = 0;
sched_params.allowDelay = RF_AllowDelayAny;
/*
* The most efficient way to schedule the command is as follows:
* 1. Schedule the BLE advertisement chain
* 2. Reschedule the RX command IF it was running.
* 3. Pend on the BLE avertisement chain
*/
beacon_handle = RF_scheduleCmd(
&rf_ble,
initial_adv,
&sched_params,
NULL,
0);
if(!CMD_HANDLE_OK(beacon_handle)) {
LOG_ERR("Unable to schedule BLE Beacon command, handle=%d status=0x%04x\n",
beacon_handle, CMD_STATUS(ble_cmd_adv_nc));
return RF_RESULT_ERROR;
}
/* Note that this only reschedules RX if it is running */
rf_result = cmd_rx_restore(cmd_rx_disable());
/* Wait until Beacon operation finishes */
beacon_events = RF_pendCmd(&rf_ble, beacon_handle, 0);
if(rf_result != RF_RESULT_OK) {
LOG_ERR("Rescheduling CMD_RX failed when BLE advertising\n");
return RF_RESULT_ERROR;
}
if(!EVENTS_CMD_DONE(beacon_events)) {
LOG_ERR("Pending on scheduled BLE Beacon command generated error, events=0x%08llx status=0x%04x\n",
beacon_events, CMD_STATUS(ble_cmd_adv_nc));
return RF_RESULT_ERROR;
}
return RF_RESULT_OK;
#else
return RF_RESULT_ERROR;
#endif
}
/*---------------------------------------------------------------------------*/
PROCESS(rf_sched_process, "RF Scheduler Process");
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(rf_sched_process, ev, data)
{
int len;
PROCESS_BEGIN();
while(1) {
PROCESS_YIELD_UNTIL((ev == PROCESS_EVENT_POLL) ||
(ev == PROCESS_EVENT_TIMER));
/* start the synth re-calibration timer once. */
if(rf_is_on) {
rf_is_on = false;
clock_time_t interval = synth_recal_interval();
LOG_INFO("Starting synth re-calibration timer, next timeout %lu\n", interval);
etimer_set(&synth_recal_timer, interval);
}
if(ev == PROCESS_EVENT_POLL) {
do {
watchdog_periodic();
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
/*
* RX will stop if the RX buffers are full. In this case, restart
* RX after we've freed at least on packet.
*/
if(rx_buf_full) {
LOG_ERR("RX buffer full, restart RX status=0x%04x\n", CMD_STATUS(netstack_cmd_rx));
rx_buf_full = false;
/* Restart RX. */
netstack_stop_rx();
netstack_sched_rx(false);
}
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_MAC.input();
}
/* Only break when we receive -1 => No available data */
} while(len >= 0);
}
/* Scheduling CMD_FS will re-calibrate the synth. */
if((ev == PROCESS_EVENT_TIMER) &&
etimer_expired(&synth_recal_timer)) {
clock_time_t interval = synth_recal_interval();
LOG_DBG("Re-calibrate synth, next interval %lu\n", interval);
netstack_sched_fs();
etimer_set(&synth_recal_timer, interval);
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
/** @} */