nes-proj/arch/platform/simplelink/cc13xx-cc26xx/launchpad/cc1352r1/CC1352R1_LAUNCHXL.c

970 lines
35 KiB
C

/*
* Copyright (c) 2017-2018, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* * Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* ====================== CC1352R1_LAUNCHXL.c ===================================
* This file is responsible for setting up the board specific items for the
* CC1352R1_LAUNCHXL board.
*/
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(driverlib/ioc.h)
#include DeviceFamily_constructPath(driverlib/udma.h)
#include DeviceFamily_constructPath(inc/hw_ints.h)
#include DeviceFamily_constructPath(inc/hw_memmap.h)
#include "CC1352R1_LAUNCHXL.h"
/*
* =============================== ADCBuf ===============================
*/
#include <ti/drivers/ADCBuf.h>
#include <ti/drivers/adcbuf/ADCBufCC26X2.h>
ADCBufCC26X2_Object adcBufCC26xxObjects[CC1352R1_LAUNCHXL_ADCBUFCOUNT];
/*
* This table converts a virtual adc channel into a dio and internal analogue
* input signal. This table is necessary for the functioning of the adcBuf
* driver. Comment out unused entries to save flash. Dio and internal signal
* pairs are hardwired. Do not remap them in the table. You may reorder entire
* entries. The mapping of dio and internal signals is package dependent.
*/
const ADCBufCC26X2_AdcChannelLutEntry ADCBufCC26X2_adcChannelLut[CC1352R1_LAUNCHXL_ADCBUF0CHANNELCOUNT] = {
{CC1352R1_LAUNCHXL_DIO23_ANALOG, ADC_COMPB_IN_AUXIO7},
{CC1352R1_LAUNCHXL_DIO24_ANALOG, ADC_COMPB_IN_AUXIO6},
{CC1352R1_LAUNCHXL_DIO25_ANALOG, ADC_COMPB_IN_AUXIO5},
{CC1352R1_LAUNCHXL_DIO26_ANALOG, ADC_COMPB_IN_AUXIO4},
{CC1352R1_LAUNCHXL_DIO27_ANALOG, ADC_COMPB_IN_AUXIO3},
{CC1352R1_LAUNCHXL_DIO28_ANALOG, ADC_COMPB_IN_AUXIO2},
{CC1352R1_LAUNCHXL_DIO29_ANALOG, ADC_COMPB_IN_AUXIO1},
{PIN_UNASSIGNED, ADC_COMPB_IN_VDDS},
{PIN_UNASSIGNED, ADC_COMPB_IN_DCOUPL},
{PIN_UNASSIGNED, ADC_COMPB_IN_VSS},
};
const ADCBufCC26X2_HWAttrs adcBufCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADCBUFCOUNT] = {
{
.intPriority = ~0,
.swiPriority = 0,
.adcChannelLut = ADCBufCC26X2_adcChannelLut,
.gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER0A,
}
};
const ADCBuf_Config ADCBuf_config[CC1352R1_LAUNCHXL_ADCBUFCOUNT] = {
{
&ADCBufCC26X2_fxnTable,
&adcBufCC26xxObjects[CC1352R1_LAUNCHXL_ADCBUF0],
&adcBufCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADCBUF0]
},
};
const uint_least8_t ADCBuf_count = CC1352R1_LAUNCHXL_ADCBUFCOUNT;
/*
* =============================== ADC ===============================
*/
#include <ti/drivers/ADC.h>
#include <ti/drivers/adc/ADCCC26XX.h>
ADCCC26XX_Object adcCC26xxObjects[CC1352R1_LAUNCHXL_ADCCOUNT];
const ADCCC26XX_HWAttrs adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADCCOUNT] = {
{
.adcDIO = CC1352R1_LAUNCHXL_DIO23_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO7,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = CC1352R1_LAUNCHXL_DIO24_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO6,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = CC1352R1_LAUNCHXL_DIO25_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO5,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = CC1352R1_LAUNCHXL_DIO26_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO4,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = CC1352R1_LAUNCHXL_DIO27_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO3,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = CC1352R1_LAUNCHXL_DIO28_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO2,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = CC1352R1_LAUNCHXL_DIO29_ANALOG,
.adcCompBInput = ADC_COMPB_IN_AUXIO1,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = PIN_UNASSIGNED,
.adcCompBInput = ADC_COMPB_IN_DCOUPL,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = PIN_UNASSIGNED,
.adcCompBInput = ADC_COMPB_IN_VSS,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
},
{
.adcDIO = PIN_UNASSIGNED,
.adcCompBInput = ADC_COMPB_IN_VDDS,
.refSource = ADCCC26XX_FIXED_REFERENCE,
.samplingDuration = ADCCC26XX_SAMPLING_DURATION_2P7_US,
.inputScalingEnabled = true,
.triggerSource = ADCCC26XX_TRIGGER_MANUAL,
.returnAdjustedVal = false
}
};
const ADC_Config ADC_config[CC1352R1_LAUNCHXL_ADCCOUNT] = {
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADC0], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADC0]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADC1], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADC1]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADC2], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADC2]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADC3], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADC3]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADC4], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADC4]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADC5], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADC5]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADC6], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADC6]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADCDCOUPL], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADCDCOUPL]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADCVSS], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADCVSS]},
{&ADCCC26XX_fxnTable, &adcCC26xxObjects[CC1352R1_LAUNCHXL_ADCVDDS], &adcCC26xxHWAttrs[CC1352R1_LAUNCHXL_ADCVDDS]},
};
const uint_least8_t ADC_count = CC1352R1_LAUNCHXL_ADCCOUNT;
/*
* =============================== ECDH ===============================
*/
#include <ti/drivers/ECDH.h>
#include <ti/drivers/ecdh/ECDHCC26X2.h>
ECDHCC26X2_Object ecdhCC26X2Objects[CC1352R1_LAUNCHXL_ECDHCOUNT];
const ECDHCC26X2_HWAttrs ecdhCC26X2HWAttrs[CC1352R1_LAUNCHXL_ECDHCOUNT] = {
{
.intPriority = ~0,
.swiPriority = 0,
}
};
const ECDH_Config ECDH_config[CC1352R1_LAUNCHXL_ECDHCOUNT] = {
{
.object = &ecdhCC26X2Objects[CC1352R1_LAUNCHXL_ECDH0],
.hwAttrs = &ecdhCC26X2HWAttrs[CC1352R1_LAUNCHXL_ECDH0]
},
};
const uint_least8_t ECDH_count = CC1352R1_LAUNCHXL_ECDHCOUNT;
/*
* =============================== ECDSA ===============================
*/
#include <ti/drivers/ECDSA.h>
#include <ti/drivers/ecdsa/ECDSACC26X2.h>
ECDSACC26X2_Object ecdsaCC26X2Objects[CC1352R1_LAUNCHXL_ECDSACOUNT];
const ECDSACC26X2_HWAttrs ecdsaCC26X2HWAttrs[CC1352R1_LAUNCHXL_ECDSACOUNT] = {
{
.intPriority = ~0,
.swiPriority = 0,
}
};
const ECDSA_Config ECDSA_config[CC1352R1_LAUNCHXL_ECDSACOUNT] = {
{
.object = &ecdsaCC26X2Objects[CC1352R1_LAUNCHXL_ECDSA0],
.hwAttrs = &ecdsaCC26X2HWAttrs[CC1352R1_LAUNCHXL_ECDSA0]
},
};
const uint_least8_t ECDSA_count = CC1352R1_LAUNCHXL_ECDSACOUNT;
/*
* =============================== ECJPAKE ===============================
*/
#include <ti/drivers/ECJPAKE.h>
#include <ti/drivers/ecjpake/ECJPAKECC26X2.h>
ECJPAKECC26X2_Object ecjpakeCC26X2Objects[CC1352R1_LAUNCHXL_ECJPAKECOUNT];
const ECJPAKECC26X2_HWAttrs ecjpakeCC26X2HWAttrs[CC1352R1_LAUNCHXL_ECJPAKECOUNT] = {
{
.intPriority = ~0,
.swiPriority = 0,
}
};
const ECJPAKE_Config ECJPAKE_config[CC1352R1_LAUNCHXL_ECJPAKECOUNT] = {
{
.object = &ecjpakeCC26X2Objects[CC1352R1_LAUNCHXL_ECJPAKE0],
.hwAttrs = &ecjpakeCC26X2HWAttrs[CC1352R1_LAUNCHXL_ECJPAKE0]
},
};
const uint_least8_t ECJPAKE_count = CC1352R1_LAUNCHXL_ECJPAKECOUNT;
/*
* =============================== SHA2 ===============================
*/
#include <ti/drivers/SHA2.h>
#include <ti/drivers/sha2/SHA2CC26X2.h>
SHA2CC26X2_Object sha2CC26X2Objects[CC1352R1_LAUNCHXL_SHA2COUNT];
const SHA2CC26X2_HWAttrs sha2CC26X2HWAttrs[CC1352R1_LAUNCHXL_SHA2COUNT] = {
{
.intPriority = ~0,
.swiPriority = 0,
}
};
const SHA2_Config SHA2_config[CC1352R1_LAUNCHXL_SHA2COUNT] = {
{
.object = &sha2CC26X2Objects[CC1352R1_LAUNCHXL_SHA20],
.hwAttrs = &sha2CC26X2HWAttrs[CC1352R1_LAUNCHXL_SHA20]
},
};
const uint_least8_t SHA2_count = CC1352R1_LAUNCHXL_SHA2COUNT;
/*
* =============================== AESCCM ===============================
*/
#include <ti/drivers/AESCCM.h>
#include <ti/drivers/aesccm/AESCCMCC26XX.h>
AESCCMCC26XX_Object aesccmCC26XXObjects[CC1352R1_LAUNCHXL_AESCCMCOUNT];
const AESCCMCC26XX_HWAttrs aesccmCC26XXHWAttrs[CC1352R1_LAUNCHXL_AESCCMCOUNT] = {
{
.intPriority = ~0,
.swiPriority = 0,
}
};
const AESCCM_Config AESCCM_config[CC1352R1_LAUNCHXL_AESCCMCOUNT] = {
{
.object = &aesccmCC26XXObjects[CC1352R1_LAUNCHXL_AESCCM0],
.hwAttrs = &aesccmCC26XXHWAttrs[CC1352R1_LAUNCHXL_AESCCM0]
},
};
const uint_least8_t AESCCM_count = CC1352R1_LAUNCHXL_AESCCMCOUNT;
/*
* =============================== AESECB ===============================
*/
#include <ti/drivers/AESECB.h>
#include <ti/drivers/aesecb/AESECBCC26XX.h>
AESECBCC26XX_Object aesecbCC26XXObjects[CC1352R1_LAUNCHXL_AESECBCOUNT];
const AESECBCC26XX_HWAttrs aesecbCC26XXHWAttrs[CC1352R1_LAUNCHXL_AESECBCOUNT] = {
{
.intPriority = ~0,
.swiPriority = 0,
}
};
const AESECB_Config AESECB_config[CC1352R1_LAUNCHXL_AESECBCOUNT] = {
{
.object = &aesecbCC26XXObjects[CC1352R1_LAUNCHXL_AESECB0],
.hwAttrs = &aesecbCC26XXHWAttrs[CC1352R1_LAUNCHXL_AESECB0]
},
};
const uint_least8_t AESECB_count = CC1352R1_LAUNCHXL_AESECBCOUNT;
/*
* =============================== GPIO ===============================
*/
#include <ti/drivers/GPIO.h>
#include <ti/drivers/gpio/GPIOCC26XX.h>
/*
* Array of Pin configurations
* NOTE: The order of the pin configurations must coincide with what was
* defined in CC1352R1_LAUNCHXL.h
* NOTE: Pins not used for interrupts should be placed at the end of the
* array. Callback entries can be omitted from callbacks array to
* reduce memory usage.
*/
GPIO_PinConfig gpioPinConfigs[] = {
/* Input pins */
GPIOCC26XX_DIO_15 | GPIO_DO_NOT_CONFIG, /* Button 0 */
GPIOCC26XX_DIO_14 | GPIO_DO_NOT_CONFIG, /* Button 1 */
GPIOCC26XX_DIO_15 | GPIO_DO_NOT_CONFIG, /* CC1352R1_LAUNCHXL_SPI_MASTER_READY */
GPIOCC26XX_DIO_21 | GPIO_DO_NOT_CONFIG, /* CC1352R1_LAUNCHXL_SPI_SLAVE_READY */
/* Output pins */
GPIOCC26XX_DIO_07 | GPIO_DO_NOT_CONFIG, /* Green LED */
GPIOCC26XX_DIO_06 | GPIO_DO_NOT_CONFIG, /* Red LED */
/* SPI Flash CSN */
GPIOCC26XX_DIO_20 | GPIO_DO_NOT_CONFIG,
/* SD CS */
GPIOCC26XX_DIO_21 | GPIO_DO_NOT_CONFIG,
};
/*
* Array of callback function pointers
* NOTE: The order of the pin configurations must coincide with what was
* defined in CC1352R1_LAUNCH.h
* NOTE: Pins not used for interrupts can be omitted from callbacks array to
* reduce memory usage (if placed at end of gpioPinConfigs array).
*/
GPIO_CallbackFxn gpioCallbackFunctions[] = {
NULL, /* Button 0 */
NULL, /* Button 1 */
NULL, /* CC1352R1_LAUNCHXL_SPI_MASTER_READY */
NULL, /* CC1352R1_LAUNCHXL_SPI_SLAVE_READY */
};
const GPIOCC26XX_Config GPIOCC26XX_config = {
.pinConfigs = (GPIO_PinConfig *)gpioPinConfigs,
.callbacks = (GPIO_CallbackFxn *)gpioCallbackFunctions,
.numberOfPinConfigs = CC1352R1_LAUNCHXL_GPIOCOUNT,
.numberOfCallbacks = sizeof(gpioCallbackFunctions)/sizeof(GPIO_CallbackFxn),
.intPriority = (~0)
};
/*
* =============================== GPTimer ===============================
* Remove unused entries to reduce flash usage both in Board.c and Board.h
*/
#include <ti/drivers/timer/GPTimerCC26XX.h>
GPTimerCC26XX_Object gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMERCOUNT];
const GPTimerCC26XX_HWAttrs gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMERPARTSCOUNT] = {
{ .baseAddr = GPT0_BASE, .intNum = INT_GPT0A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT0, .pinMux = GPT_PIN_0A, },
{ .baseAddr = GPT0_BASE, .intNum = INT_GPT0B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT0, .pinMux = GPT_PIN_0B, },
{ .baseAddr = GPT1_BASE, .intNum = INT_GPT1A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT1, .pinMux = GPT_PIN_1A, },
{ .baseAddr = GPT1_BASE, .intNum = INT_GPT1B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT1, .pinMux = GPT_PIN_1B, },
{ .baseAddr = GPT2_BASE, .intNum = INT_GPT2A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT2, .pinMux = GPT_PIN_2A, },
{ .baseAddr = GPT2_BASE, .intNum = INT_GPT2B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT2, .pinMux = GPT_PIN_2B, },
{ .baseAddr = GPT3_BASE, .intNum = INT_GPT3A, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT3, .pinMux = GPT_PIN_3A, },
{ .baseAddr = GPT3_BASE, .intNum = INT_GPT3B, .intPriority = (~0), .powerMngrId = PowerCC26XX_PERIPH_GPT3, .pinMux = GPT_PIN_3B, },
};
const GPTimerCC26XX_Config GPTimerCC26XX_config[CC1352R1_LAUNCHXL_GPTIMERPARTSCOUNT] = {
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER0], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER0A], GPT_A },
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER0], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER0B], GPT_B },
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER1], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER1A], GPT_A },
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER1], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER1B], GPT_B },
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER2], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER2A], GPT_A },
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER2], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER2B], GPT_B },
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER3], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER3A], GPT_A },
{ &gptimerCC26XXObjects[CC1352R1_LAUNCHXL_GPTIMER3], &gptimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_GPTIMER3B], GPT_B },
};
/*
* =============================== I2C ===============================
*/
#include <ti/drivers/I2C.h>
#include <ti/drivers/i2c/I2CCC26XX.h>
#if TI_I2C_CONF_ENABLE
I2CCC26XX_Object i2cCC26xxObjects[CC1352R1_LAUNCHXL_I2CCOUNT];
const I2CCC26XX_HWAttrsV1 i2cCC26xxHWAttrs[CC1352R1_LAUNCHXL_I2CCOUNT] = {
#if TI_I2C_CONF_I2C0_ENABLE
{
.baseAddr = I2C0_BASE,
.powerMngrId = PowerCC26XX_PERIPH_I2C0,
.intNum = INT_I2C_IRQ,
.intPriority = ~0,
.swiPriority = 0,
.sdaPin = CC1352R1_LAUNCHXL_I2C0_SDA0,
.sclPin = CC1352R1_LAUNCHXL_I2C0_SCL0,
},
#endif
};
const I2C_Config I2C_config[CC1352R1_LAUNCHXL_I2CCOUNT] = {
#if TI_I2C_CONF_I2C0_ENABLE
{
.fxnTablePtr = &I2CCC26XX_fxnTable,
.object = &i2cCC26xxObjects[CC1352R1_LAUNCHXL_I2C0],
.hwAttrs = &i2cCC26xxHWAttrs[CC1352R1_LAUNCHXL_I2C0]
},
#endif
};
const uint_least8_t I2C_count = CC1352R1_LAUNCHXL_I2CCOUNT;
#endif /* TI_I2C_CONF_ENABLE */
/*
* =============================== NVS ===============================
*/
#include <ti/drivers/NVS.h>
#include <ti/drivers/nvs/NVSSPI25X.h>
#include <ti/drivers/nvs/NVSCC26XX.h>
#define NVS_REGIONS_BASE 0x48000
#define SECTORSIZE 0x2000
#define REGIONSIZE (SECTORSIZE * 4)
#if TI_NVS_CONF_ENABLE
#if TI_NVS_CONF_NVS_INTERNAL_ENABLE
/*
* Reserve flash sectors for NVS driver use by placing an uninitialized byte
* array at the desired flash address.
*/
#if defined(__TI_COMPILER_VERSION__)
/*
* Place uninitialized array at NVS_REGIONS_BASE
*/
#pragma LOCATION(flashBuf, NVS_REGIONS_BASE);
#pragma NOINIT(flashBuf);
static char flashBuf[REGIONSIZE];
#elif defined(__IAR_SYSTEMS_ICC__)
/*
* Place uninitialized array at NVS_REGIONS_BASE
*/
static __no_init char flashBuf[REGIONSIZE] @ NVS_REGIONS_BASE;
#elif defined(__GNUC__)
/*
* Place the flash buffers in the .nvs section created in the gcc linker file.
* The .nvs section enforces alignment on a sector boundary but may
* be placed anywhere in flash memory. If desired the .nvs section can be set
* to a fixed address by changing the following in the gcc linker file:
*
* .nvs (FIXED_FLASH_ADDR) (NOLOAD) : AT (FIXED_FLASH_ADDR) {
* *(.nvs)
* } > REGION_TEXT
*/
__attribute__ ((section (".nvs")))
static char flashBuf[REGIONSIZE];
#endif
/* Allocate objects for NVS Internal Regions */
NVSCC26XX_Object nvsCC26xxObjects[1];
/* Hardware attributes for NVS Internal Regions */
const NVSCC26XX_HWAttrs nvsCC26xxHWAttrs[1] = {
{
.regionBase = (void *)flashBuf,
.regionSize = REGIONSIZE,
},
};
#endif /* TI_NVS_CONF_NVS_INTERNAL_ENABLE */
#if TI_NVS_CONF_NVS_EXTERNAL_ENABLE
#define SPISECTORSIZE 0x1000
#define SPIREGIONSIZE (SPISECTORSIZE * 32)
#define VERIFYBUFSIZE 64
static uint8_t verifyBuf[VERIFYBUFSIZE];
/* Allocate objects for NVS External Regions */
NVSSPI25X_Object nvsSPI25XObjects[1];
/* Hardware attributes for NVS External Regions */
const NVSSPI25X_HWAttrs nvsSPI25XHWAttrs[1] = {
{
.regionBaseOffset = 0,
.regionSize = SPIREGIONSIZE,
.sectorSize = SPISECTORSIZE,
.verifyBuf = verifyBuf,
.verifyBufSize = VERIFYBUFSIZE,
.spiHandle = NULL,
.spiIndex = 0,
.spiBitRate = 4000000,
.spiCsnGpioIndex = CC1352R1_LAUNCHXL_GPIO_SPI_FLASH_CS,
},
};
#endif /* TI_NVS_CONF_NVS_EXTERNAL_ENABLE */
/* NVS Region index 0 and 1 refer to NVS and NVS SPI respectively */
const NVS_Config NVS_config[CC1352R1_LAUNCHXL_NVSCOUNT] = {
#if TI_NVS_CONF_NVS_INTERNAL_ENABLE
{
.fxnTablePtr = &NVSCC26XX_fxnTable,
.object = &nvsCC26xxObjects[0],
.hwAttrs = &nvsCC26xxHWAttrs[0],
},
#endif
#if TI_NVS_CONF_NVS_EXTERNAL_ENABLE
{
.fxnTablePtr = &NVSSPI25X_fxnTable,
.object = &nvsSPI25XObjects[0],
.hwAttrs = &nvsSPI25XHWAttrs[0],
},
#endif
};
const uint_least8_t NVS_count = CC1352R1_LAUNCHXL_NVSCOUNT;
#endif /* TI_NVS_CONF_ENABLE */
/*
* =============================== PIN ===============================
*/
#include <ti/drivers/PIN.h>
#include <ti/drivers/pin/PINCC26XX.h>
const PIN_Config BoardGpioInitTable[] = {
CC1352R1_LAUNCHXL_PIN_RLED | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
CC1352R1_LAUNCHXL_PIN_GLED | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* LED initially off */
CC1352R1_LAUNCHXL_PIN_BTN1 | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
CC1352R1_LAUNCHXL_PIN_BTN2 | PIN_INPUT_EN | PIN_PULLUP | PIN_IRQ_BOTHEDGES | PIN_HYSTERESIS, /* Button is active low */
CC1352R1_LAUNCHXL_SPI_FLASH_CS | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MIN, /* External flash chip select */
CC1352R1_LAUNCHXL_UART0_RX | PIN_INPUT_EN | PIN_PULLUP, /* UART RX via debugger back channel */
CC1352R1_LAUNCHXL_UART0_TX | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL, /* UART TX via debugger back channel */
CC1352R1_LAUNCHXL_SPI0_MOSI | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI master out - slave in */
CC1352R1_LAUNCHXL_SPI0_MISO | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI master in - slave out */
CC1352R1_LAUNCHXL_SPI0_CLK | PIN_INPUT_EN | PIN_PULLDOWN, /* SPI clock */
CC1352R1_LAUNCHXL_DIO30_RF_SUB1GHZ | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX, /* RF SW Switch defaults to 2.4GHz path */
PIN_TERMINATE
};
const PINCC26XX_HWAttrs PINCC26XX_hwAttrs = {
.intPriority = ~0,
.swiPriority = 0
};
/*
* =============================== Power ===============================
*/
#include <ti/drivers/Power.h>
#include <ti/drivers/power/PowerCC26X2.h>
const PowerCC26X2_Config PowerCC26X2_config = {
.policyInitFxn = NULL,
.policyFxn = &PowerCC26XX_standbyPolicy,
.calibrateFxn = &PowerCC26XX_calibrate,
.enablePolicy = true,
.calibrateRCOSC_LF = true,
.calibrateRCOSC_HF = true,
};
/*
* =============================== PWM ===============================
* Remove unused entries to reduce flash usage both in Board.c and Board.h
*/
#include <ti/drivers/PWM.h>
#include <ti/drivers/pwm/PWMTimerCC26XX.h>
PWMTimerCC26XX_Object pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWMCOUNT];
const PWMTimerCC26XX_HwAttrs pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWMCOUNT] = {
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN0, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER0A },
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN1, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER0B },
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN2, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER1A },
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN3, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER1B },
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN4, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER2A },
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN5, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER2B },
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN6, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER3A },
{ .pwmPin = CC1352R1_LAUNCHXL_PWMPIN7, .gpTimerUnit = CC1352R1_LAUNCHXL_GPTIMER3B },
};
const PWM_Config PWM_config[CC1352R1_LAUNCHXL_PWMCOUNT] = {
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM0], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM0] },
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM1], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM1] },
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM2], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM2] },
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM3], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM3] },
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM4], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM4] },
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM5], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM5] },
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM6], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM6] },
{ &PWMTimerCC26XX_fxnTable, &pwmtimerCC26xxObjects[CC1352R1_LAUNCHXL_PWM7], &pwmtimerCC26xxHWAttrs[CC1352R1_LAUNCHXL_PWM7] },
};
const uint_least8_t PWM_count = CC1352R1_LAUNCHXL_PWMCOUNT;
/*
* =============================== RF Driver ===============================
*/
#include <ti/drivers/rf/RF.h>
/*
* Board-specific callback function to set the correct antenna path.
*
* This function is called by the RF driver on global driver events.
* It contains a default implementation to set the correct antenna path.
* This function is defined in the file CC1352R1_LAUNCHXL_fxns.c
*/
extern void rfDriverCallback(RF_Handle client, RF_GlobalEvent events, void *arg);
const RFCC26XX_HWAttrsV2 RFCC26XX_hwAttrs = {
.hwiPriority = ~0, /* Lowest HWI priority */
.swiPriority = 0, /* Lowest SWI priority */
.xoscHfAlwaysNeeded = true, /* Keep XOSC dependency while in stanby */
/* Register the board specific callback */
.globalCallback = &rfDriverCallback,
/* Subscribe the callback to both events */
.globalEventMask = RF_GlobalEventRadioSetup | RF_GlobalEventRadioPowerDown
};
/*
* =============================== SD ===============================
*/
#include <ti/drivers/SD.h>
#include <ti/drivers/sd/SDSPI.h>
#if TI_SD_CONF_ENABLE
#if !(TI_SPI_CONF_SPI0_ENABLE)
#error "SD driver requires SPI0 enabled"
#endif
SDSPI_Object sdspiObjects[CC1352R1_LAUNCHXL_SDCOUNT];
const SDSPI_HWAttrs sdspiHWAttrs[CC1352R1_LAUNCHXL_SDCOUNT] = {
{
.spiIndex = CC1352R1_LAUNCHXL_SPI0,
.spiCsGpioIndex = CC1352R1_LAUNCHXL_SDSPI_CS
}
};
const SD_Config SD_config[CC1352R1_LAUNCHXL_SDCOUNT] = {
{
.fxnTablePtr = &SDSPI_fxnTable,
.object = &sdspiObjects[CC1352R1_LAUNCHXL_SDSPI0],
.hwAttrs = &sdspiHWAttrs[CC1352R1_LAUNCHXL_SDSPI0]
},
};
const uint_least8_t SD_count = CC1352R1_LAUNCHXL_SDCOUNT;
#endif /* TI_SD_CONF_ENABLE */
/*
* =============================== SPI DMA ===============================
*/
#include <ti/drivers/SPI.h>
#include <ti/drivers/spi/SPICC26XXDMA.h>
#if TI_SPI_CONF_ENABLE
SPICC26XXDMA_Object spiCC26XXDMAObjects[CC1352R1_LAUNCHXL_SPICOUNT];
/*
* NOTE: The SPI instances below can be used by the SD driver to communicate
* with a SD card via SPI. The 'defaultTxBufValue' fields below are set to 0xFF
* to satisfy the SDSPI driver requirement.
*/
const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[CC1352R1_LAUNCHXL_SPICOUNT] = {
#if TI_SPI_CONF_SPI0_ENABLE
{
.baseAddr = SSI0_BASE,
.intNum = INT_SSI0_COMB,
.intPriority = ~0,
.swiPriority = 0,
.powerMngrId = PowerCC26XX_PERIPH_SSI0,
.defaultTxBufValue = 0xFF,
.rxChannelBitMask = 1<<UDMA_CHAN_SSI0_RX,
.txChannelBitMask = 1<<UDMA_CHAN_SSI0_TX,
.mosiPin = CC1352R1_LAUNCHXL_SPI0_MOSI,
.misoPin = CC1352R1_LAUNCHXL_SPI0_MISO,
.clkPin = CC1352R1_LAUNCHXL_SPI0_CLK,
.csnPin = CC1352R1_LAUNCHXL_SPI0_CSN,
.minDmaTransferSize = 10
},
#endif
#if TI_SPI_CONF_SPI1_ENABLE
{
.baseAddr = SSI1_BASE,
.intNum = INT_SSI1_COMB,
.intPriority = ~0,
.swiPriority = 0,
.powerMngrId = PowerCC26XX_PERIPH_SSI1,
.defaultTxBufValue = 0xFF,
.rxChannelBitMask = 1<<UDMA_CHAN_SSI1_RX,
.txChannelBitMask = 1<<UDMA_CHAN_SSI1_TX,
.mosiPin = CC1352R1_LAUNCHXL_SPI1_MOSI,
.misoPin = CC1352R1_LAUNCHXL_SPI1_MISO,
.clkPin = CC1352R1_LAUNCHXL_SPI1_CLK,
.csnPin = CC1352R1_LAUNCHXL_SPI1_CSN,
.minDmaTransferSize = 10
},
#endif
};
const SPI_Config SPI_config[CC1352R1_LAUNCHXL_SPICOUNT] = {
#if TI_SPI_CONF_SPI0_ENABLE
{
.fxnTablePtr = &SPICC26XXDMA_fxnTable,
.object = &spiCC26XXDMAObjects[CC1352R1_LAUNCHXL_SPI0],
.hwAttrs = &spiCC26XXDMAHWAttrs[CC1352R1_LAUNCHXL_SPI0]
},
#endif
#if TI_SPI_CONF_SPI1_ENABLE
{
.fxnTablePtr = &SPICC26XXDMA_fxnTable,
.object = &spiCC26XXDMAObjects[CC1352R1_LAUNCHXL_SPI1],
.hwAttrs = &spiCC26XXDMAHWAttrs[CC1352R1_LAUNCHXL_SPI1]
},
#endif
};
const uint_least8_t SPI_count = CC1352R1_LAUNCHXL_SPICOUNT;
#endif /* TI_SPI_CONF_ENABLE */
/*
* =============================== TRNG ===============================
*/
#include <ti/drivers/TRNG.h>
#include <ti/drivers/trng/TRNGCC26X2.h>
TRNGCC26X2_Object trngCC26X2Object[CC1352R1_LAUNCHXL_TRNGCOUNT];
const TRNGCC26X2_HWAttrs trngCC26X2HWAttrs[CC1352R1_LAUNCHXL_TRNGCOUNT] = {
{
.swiPriority = 0,
.intPriority = ~0,
}
};
const TRNG_Config TRNG_config[] = {
{ &trngCC26X2Object[0], &trngCC26X2HWAttrs[0] },
};
const uint8_t TRNG_count = CC1352R1_LAUNCHXL_TRNGCOUNT;
/*
* =============================== UART ===============================
*/
#include <ti/drivers/UART.h>
#include <ti/drivers/uart/UARTCC26XX.h>
#if TI_UART_CONF_ENABLE
UARTCC26XX_Object uartCC26XXObjects[CC1352R1_LAUNCHXL_UARTCOUNT];
uint8_t uartCC26XXRingBuffer[CC1352R1_LAUNCHXL_UARTCOUNT][32];
const UARTCC26XX_HWAttrsV2 uartCC26XXHWAttrs[CC1352R1_LAUNCHXL_UARTCOUNT] = {
#if TI_UART_CONF_UART0_ENABLE
{
.baseAddr = UART0_BASE,
.powerMngrId = PowerCC26XX_PERIPH_UART0,
.intNum = INT_UART0_COMB,
.intPriority = ~0,
.swiPriority = 0,
.txPin = CC1352R1_LAUNCHXL_UART0_TX,
.rxPin = CC1352R1_LAUNCHXL_UART0_RX,
.ctsPin = PIN_UNASSIGNED,
.rtsPin = PIN_UNASSIGNED,
.ringBufPtr = uartCC26XXRingBuffer[CC1352R1_LAUNCHXL_UART0],
.ringBufSize = sizeof(uartCC26XXRingBuffer[CC1352R1_LAUNCHXL_UART0]),
.txIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_1_8,
.rxIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_4_8,
.errorFxn = NULL
},
#endif
#if TI_UART_CONF_UART1_ENABLE
{
.baseAddr = UART1_BASE,
.powerMngrId = PowerCC26X2_PERIPH_UART1,
.intNum = INT_UART1_COMB,
.intPriority = ~0,
.swiPriority = 0,
.txPin = CC1352R1_LAUNCHXL_UART1_TX,
.rxPin = CC1352R1_LAUNCHXL_UART1_RX,
.ctsPin = PIN_UNASSIGNED,
.rtsPin = PIN_UNASSIGNED,
.ringBufPtr = uartCC26XXRingBuffer[CC1352R1_LAUNCHXL_UART1],
.ringBufSize = sizeof(uartCC26XXRingBuffer[CC1352R1_LAUNCHXL_UART1]),
.txIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_1_8,
.rxIntFifoThr = UARTCC26XX_FIFO_THRESHOLD_4_8,
.errorFxn = NULL
},
#endif
};
const UART_Config UART_config[CC1352R1_LAUNCHXL_UARTCOUNT] = {
#if TI_UART_CONF_UART0_ENABLE
{
.fxnTablePtr = &UARTCC26XX_fxnTable,
.object = &uartCC26XXObjects[CC1352R1_LAUNCHXL_UART0],
.hwAttrs = &uartCC26XXHWAttrs[CC1352R1_LAUNCHXL_UART0]
},
#endif
#if TI_UART_CONF_UART1_ENABLE
{
.fxnTablePtr = &UARTCC26XX_fxnTable,
.object = &uartCC26XXObjects[CC1352R1_LAUNCHXL_UART1],
.hwAttrs = &uartCC26XXHWAttrs[CC1352R1_LAUNCHXL_UART1]
},
#endif
};
const uint_least8_t UART_count = CC1352R1_LAUNCHXL_UARTCOUNT;
#endif /* TI_UART_CONF_ENABLE */
/*
* =============================== UDMA ===============================
*/
#include <ti/drivers/dma/UDMACC26XX.h>
UDMACC26XX_Object udmaObjects[CC1352R1_LAUNCHXL_UDMACOUNT];
const UDMACC26XX_HWAttrs udmaHWAttrs[CC1352R1_LAUNCHXL_UDMACOUNT] = {
{
.baseAddr = UDMA0_BASE,
.powerMngrId = PowerCC26XX_PERIPH_UDMA,
.intNum = INT_DMA_ERR,
.intPriority = ~0
}
};
const UDMACC26XX_Config UDMACC26XX_config[CC1352R1_LAUNCHXL_UDMACOUNT] = {
{
.object = &udmaObjects[CC1352R1_LAUNCHXL_UDMA0],
.hwAttrs = &udmaHWAttrs[CC1352R1_LAUNCHXL_UDMA0]
},
};
/*
* =============================== Watchdog ===============================
*/
#include <ti/drivers/Watchdog.h>
#include <ti/drivers/watchdog/WatchdogCC26XX.h>
WatchdogCC26XX_Object watchdogCC26XXObjects[CC1352R1_LAUNCHXL_WATCHDOGCOUNT];
const WatchdogCC26XX_HWAttrs watchdogCC26XXHWAttrs[CC1352R1_LAUNCHXL_WATCHDOGCOUNT] = {
{
.baseAddr = WDT_BASE,
.reloadValue = 1000 /* Reload value in milliseconds */
},
};
const Watchdog_Config Watchdog_config[CC1352R1_LAUNCHXL_WATCHDOGCOUNT] = {
{
.fxnTablePtr = &WatchdogCC26XX_fxnTable,
.object = &watchdogCC26XXObjects[CC1352R1_LAUNCHXL_WATCHDOG0],
.hwAttrs = &watchdogCC26XXHWAttrs[CC1352R1_LAUNCHXL_WATCHDOG0]
},
};
const uint_least8_t Watchdog_count = CC1352R1_LAUNCHXL_WATCHDOGCOUNT;
/*
* Board-specific initialization function to disable external flash.
* This function is defined in the file CC1352R1_LAUNCHXL_fxns.c
*/
extern void Board_initHook(void);
/*
* ======== CC1352R1_LAUNCHXL_initGeneral ========
*/
void CC1352R1_LAUNCHXL_initGeneral(void)
{
Power_init();
if (PIN_init(BoardGpioInitTable) != PIN_SUCCESS) {
/* Error with PIN_init */
while (1);
}
/* Perform board-specific initialization */
Board_initHook();
}