277 lines
8.6 KiB
C
277 lines
8.6 KiB
C
/*
|
|
* Copyright (c) 2015, Copyright Robert Olsson
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*
|
|
*
|
|
* Author : Robert Olsson rolss@kth.se/robert@radio-sensors.com
|
|
* Created : 2016-09-14
|
|
*/
|
|
|
|
/**
|
|
* \file
|
|
* Basic functions for Bosch BME280 based on datasheet Rev 1.1
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
#include <string.h>
|
|
#include "bme280.h"
|
|
#include "bme280-arch.h"
|
|
#include "lib/sensors.h"
|
|
|
|
static struct {
|
|
unsigned short dig_t1;
|
|
signed short dig_t2;
|
|
signed short dig_t3;
|
|
unsigned short dig_p1;
|
|
signed short dig_p2;
|
|
signed short dig_p3;
|
|
signed short dig_p4;
|
|
signed short dig_p5;
|
|
signed short dig_p6;
|
|
signed short dig_p7;
|
|
signed short dig_p8;
|
|
signed short dig_p9;
|
|
unsigned char dig_h1;
|
|
signed short dig_h2;
|
|
unsigned char dig_h3;
|
|
signed short dig_h4;
|
|
signed short dig_h5;
|
|
signed char dig_h6;
|
|
int32_t t_fine;
|
|
uint8_t mode;
|
|
} bm;
|
|
|
|
int32_t
|
|
bme280_t_overscale100(int32_t ut)
|
|
{
|
|
int32_t v1, v2, t;
|
|
|
|
v1 = ((((ut >> 3) - ((int32_t)bm.dig_t1 << 1))) *
|
|
((int32_t)bm.dig_t2)) >> 11;
|
|
|
|
v2 = (((((ut >> 4) - ((int32_t)bm.dig_t1)) * ((ut >> 4) -
|
|
((int32_t)bm.dig_t1))) >> 12) * ((int32_t)bm.dig_t3)) >> 14;
|
|
|
|
bm.t_fine = v1 + v2;
|
|
t = (bm.t_fine * 5 + 128) >> 8;
|
|
return t;
|
|
}
|
|
#ifdef BME280_32BIT
|
|
static uint32_t
|
|
bme280_p(int32_t up)
|
|
{
|
|
int32_t v1, v2;
|
|
uint32_t p;
|
|
|
|
v1 = (((int32_t)bm.t_fine) >> 1) - (int32_t)64000;
|
|
v2 = (((v1 >> 2) * (v1 >> 2)) >> 11) * ((int32_t)bm.dig_p6);
|
|
v2 = v2 + ((v1 * ((int32_t)bm.dig_p5)) << 1);
|
|
v2 = (v2 >> 2) + (((int32_t)bm.dig_p4) << 16);
|
|
|
|
v1 = (((bm.dig_p3 * (((v1 >> 2) * (v1 >> 2)) >> 13)) >> 3) +
|
|
((((int32_t)bm.dig_p2) * v1) >> 1)) >> 18;
|
|
|
|
v1 = ((((32768 + v1)) * ((int32_t)bm.dig_p1)) >> 15);
|
|
|
|
if(v1 == 0) {
|
|
return 0;
|
|
}
|
|
|
|
p = (((uint32_t)(((int32_t)1048576) - up) - (v2 >> 12))) * 3125;
|
|
|
|
if(p < 0x80000000) {
|
|
p = (p << 1) / ((uint32_t)v1);
|
|
} else {
|
|
p = (p / (uint32_t)v1) * 2;
|
|
}
|
|
|
|
v1 = (((int32_t)bm.dig_p9) * ((int32_t)(((p >> 3) * (p >> 3)) >> 13))) >> 12;
|
|
v2 = (((int32_t)(p >> 2)) * ((int32_t)bm.dig_p8)) >> 13;
|
|
p = (uint32_t)((int32_t)p + ((v1 + v2 + bm.dig_p7) >> 4));
|
|
return p;
|
|
}
|
|
#else
|
|
|
|
static uint32_t
|
|
bme280_p_overscale256(int32_t up)
|
|
{
|
|
int64_t v1, v2, p;
|
|
|
|
v1 = ((int64_t)bm.t_fine) - 128000;
|
|
v2 = v1 * v1 * (int64_t)bm.dig_p6;
|
|
v2 = v2 + ((v1 * (int64_t)bm.dig_p5) << 17);
|
|
v2 = v2 + (((int64_t)bm.dig_p4) << 35);
|
|
v1 = ((v1 * v1 * (int64_t)bm.dig_p3) >> 8) + ((v1 * (int64_t)bm.dig_p2) << 12);
|
|
v1 = (((((int64_t)1) << 47) + v1)) * ((int64_t)bm.dig_p1) >> 33;
|
|
|
|
if(v1 == 0) {
|
|
return 0;
|
|
}
|
|
|
|
p = 1048576 - up;
|
|
p = (((p << 31) - v2) * 3125) / v1;
|
|
v1 = (((int64_t)bm.dig_p9) * (p >> 13) * (p >> 13)) >> 25;
|
|
v2 = (((int64_t)bm.dig_p8) * p) >> 19;
|
|
p = (((p + v1 + v2) >> 8) + (((int64_t)bm.dig_p7) << 4));
|
|
return (uint32_t)p;
|
|
}
|
|
#endif
|
|
|
|
static uint32_t
|
|
bme280_h_overscale1024(int32_t uh)
|
|
{
|
|
int32_t v1;
|
|
v1 = (bm.t_fine - ((int32_t)76800));
|
|
v1 = (((((uh << 14) - (((int32_t)bm.dig_h4) << 20) - (((int32_t)bm.dig_h5) * v1)) + ((int32_t)16384)) >> 15)
|
|
* (((((((v1 * ((int32_t)bm.dig_h6)) >> 10) * (((v1 * ((int32_t)bm.dig_h3)) >> 11) + ((int32_t)32768)))
|
|
>> 10) + ((int32_t)2097152)) * ((int32_t)bm.dig_h2) + 8192) >> 14));
|
|
v1 = (v1 - (((((v1 >> 15) * (v1 >> 15)) >> 7) * ((int32_t)bm.dig_h1)) >> 4));
|
|
v1 = (v1 < 0 ? 0 : v1);
|
|
v1 = (v1 > 419430400 ? 419430400 : v1);
|
|
return (uint32_t)(v1 >> 12);
|
|
}
|
|
uint8_t
|
|
bme280_init(uint8_t mode)
|
|
{
|
|
uint16_t i;
|
|
uint8_t buf[26];
|
|
|
|
bme280_arch_i2c_init();
|
|
|
|
/* Do not mess with other chips */
|
|
bme280_arch_i2c_read_mem(BME280_ADDR, 0xD0, buf, 1);
|
|
if(buf[0] != BME280_CHIP_ID) {
|
|
return 0;
|
|
}
|
|
|
|
bme280_arch_i2c_write_mem(BME280_ADDR, BME280_CNTL_RESET, 0xB6);
|
|
|
|
for(i = 0; i < BME280_MAX_WAIT; i++) {
|
|
clock_delay_usec(1000);
|
|
}
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
/* Burst read of all calibration part 1 */
|
|
bme280_arch_i2c_read_mem(BME280_ADDR, BME280_DIG_T1_ADDR, buf, sizeof(buf));
|
|
bm.dig_t1 = ((uint16_t)buf[1] << 8) | (uint16_t)buf[0];
|
|
bm.dig_t2 = ((int16_t)buf[3] << 8) | (uint16_t)buf[2];
|
|
bm.dig_t3 = ((int16_t)buf[5] << 8) | (uint16_t)buf[4];
|
|
bm.dig_p1 = ((uint16_t)buf[7] << 8) | (uint16_t)buf[6];
|
|
bm.dig_p2 = ((int16_t)buf[9] << 8) | (uint16_t)buf[8];
|
|
bm.dig_p3 = ((int16_t)buf[11] << 8) | (uint16_t)buf[10];
|
|
bm.dig_p4 = ((int16_t)buf[13] << 8) | (uint16_t)buf[12];
|
|
bm.dig_p5 = ((int16_t)buf[15] << 8) | (uint16_t)buf[14];
|
|
bm.dig_p6 = ((int16_t)buf[17] << 8) | (uint16_t)buf[16];
|
|
bm.dig_p7 = ((int16_t)buf[19] << 8) | (uint16_t)buf[18];
|
|
bm.dig_p8 = ((int16_t)buf[21] << 8) | (uint16_t)buf[20];
|
|
bm.dig_p9 = ((int16_t)buf[23] << 8) | (uint16_t)buf[22];
|
|
/* A0 not used */
|
|
bm.dig_h1 = (unsigned char)buf[25];
|
|
|
|
/* Burst read of all calibration part 2 */
|
|
bme280_arch_i2c_read_mem(BME280_ADDR, BME280_DIG_H2_ADDR, buf, 8);
|
|
bm.dig_h2 = ((int16_t)buf[1] << 8) | (uint16_t)buf[0];
|
|
bm.dig_h3 = (unsigned char)buf[2];
|
|
bm.dig_h4 = ((int16_t)buf[3] << 4) | (((uint16_t)buf[4]) & 0xF);
|
|
bm.dig_h5 = ((int16_t)buf[6] << 4) | (((uint16_t)buf[5]) & 0xF);
|
|
bm.dig_h6 = (unsigned char)buf[7];
|
|
|
|
bm.mode = mode;
|
|
return 1;
|
|
}
|
|
void
|
|
bme280_read(uint8_t mode)
|
|
{
|
|
int32_t ut, uh, up;
|
|
uint8_t buf[8], sleep;
|
|
uint16_t i;
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
/* Are we initilized and in the right mode? */
|
|
if(mode == BME280_MODE_NONE || mode != bm.mode) {
|
|
return;
|
|
}
|
|
|
|
ut = uh = up = 0;
|
|
|
|
/* Weather mode. See sectiom 3.5 Datasheet */
|
|
if(mode == BME280_MODE_WEATHER) {
|
|
/* Humidity oversampling *1 */
|
|
bme280_arch_i2c_write_mem(BME280_ADDR, BME280_CNTL_HUM, 0x01);
|
|
|
|
/* 00100111 0x27 oversampling *1 for t and p plus normal mode */
|
|
/* 0.5 ms -- no filter -- no SPI */
|
|
bme280_arch_i2c_write_mem(BME280_ADDR, BME280_CONTROL, 0x00);
|
|
|
|
/* 00100110 0x26 oversampling *1 for t and p plus forced mode */
|
|
/* Trigger measurement needed for every time in forced mode */
|
|
bme280_arch_i2c_write_mem(BME280_ADDR, BME280_CNTL_MEAS, 0x26);
|
|
/* Wait to get into sleep mode == measurement done */
|
|
for(i = 0; i < BME280_MAX_WAIT; i++) {
|
|
bme280_arch_i2c_read_mem(BME280_ADDR, BME280_CNTL_MEAS, &sleep, 1);
|
|
sleep = sleep& 0x03;
|
|
if(sleep== 0) {
|
|
break;
|
|
} else {
|
|
clock_delay_usec(1000);
|
|
}
|
|
}
|
|
if(i == BME280_MAX_WAIT) {
|
|
return; /* error wait*/
|
|
}
|
|
} else { /* if(mode == BME280_MODE_WEATHER) */
|
|
return; /* error mode*/
|
|
}
|
|
|
|
/* Burst read of all measurements */
|
|
bme280_arch_i2c_read_mem(BME280_ADDR, BME280_PRESS, buf, 8);
|
|
ut = (uint32_t)(buf[3]) << 12 | (uint32_t)(buf[4]) << 4 | (uint32_t)buf[5] >> 4;
|
|
up = (uint32_t)(buf[0]) << 12 | (uint32_t)(buf[1]) << 4 | (uint32_t)buf[2] >> 4;
|
|
uh = (uint32_t)(buf[6]) << 8 | (uint32_t)buf[7];
|
|
|
|
bme280_mea.t_overscale100 = bme280_t_overscale100(ut);
|
|
bme280_mea.h_overscale1024 = bme280_h_overscale1024(uh);
|
|
#ifdef BME280_64BIT
|
|
bme280_mea.p_overscale256 = bme280_p_overscale256(up);
|
|
#else
|
|
bme280_mea.p = bme280_p(up);
|
|
#endif
|
|
|
|
#if TEST
|
|
printf("T_BME280=%5.2f", (double)bme280_mea.t_overscale100 / 100.);
|
|
printf(" RH_BME280=%5.2f ", (double)bme280_mea.h_overscale1024 / 1024.);
|
|
#ifdef BME280_64BIT
|
|
printf(" P_BME280=%5.2f\n", (double)bme280_mea.p_overscale256 / 256.);
|
|
#else
|
|
printf(" P_BME280=%5.2f\n", (double)bme280_mea.p);
|
|
#endif
|
|
#endif
|
|
}
|