giomba/nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
af27d2d252
nes-proj/cpu/cc2538/dev
History
Brad Campbell af27d2d252 [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS 
Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer
requires more than just a single read. This adds a loop that empties the
entire RX buffer on a FLUSH().

Different SPI chips needs different SPI settings. This commit adds a
function that allows chip drivers to configure the SPI peripheral before
using it.

The frame pin the driver was using as a chip select does not work as
most devices expect it to. It toggles after every byte, and most chips
interpret that as end of message. To make drivers more reliable, each
chip driver should setup a GPIO and assert it as needed.
2014-04-15 14:07:10 -04:00
..
adc.c cc2538: Add adc driver and example 2013-12-06 22:07:45 +01:00
adc.h cc2538: Add adc driver and example 2013-12-06 22:07:45 +01:00
ana-regs.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
cc2538-rf.c Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
cc2538-rf.h Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
cctest.h cc2538: Add adc driver and example 2013-12-06 22:07:45 +01:00
flash-cca.h cc2538: Add header file for flash CCA page and use it 2013-12-05 18:45:51 +01:00
gpio.c cc2538: lpm: Fix RTIMER_NOW() upon wake-up 2013-12-05 20:23:29 +01:00
gpio.h cc2538: gpio: Add macros to use GPIO power-up interrupts 2013-11-26 22:10:47 +01:00
gptimer.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
ioc.c New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
ioc.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
mpu.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
nvic.c New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
nvic.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
random.c New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
rfcore-ffsm.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
rfcore-sfr.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
rfcore-xreg.h cc2538: Add adc driver and example 2013-12-06 22:07:45 +01:00
rfcore.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
rom-util.h cc2538: Add driver for the rom utility function library 2013-11-18 12:38:06 +01:00
scb.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
smwdthrosc.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
soc-adc.h cc2538: Add adc driver and example 2013-12-06 22:07:45 +01:00
spi.c [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS 2014-04-15 14:07:10 -04:00
ssi.h [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS 2014-04-15 14:07:10 -04:00
sys-ctrl.c cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal 2013-11-15 15:52:10 +01:00
sys-ctrl.h cc2538: sys_ctrl: Make it possible to use the 32-kHz crystal 2013-11-15 15:52:10 +01:00
systick.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
uart1.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
uart.c Eliminate UART_CONF_IBRD and UART_CONF_FBRD. 2014-03-22 10:26:03 -04:00
uart.h Change uart_set_baudrate() to a do-while statement. 2014-03-22 10:22:11 -04:00
udma.c cc2538: Move SoC data to a dedicated section to save space 2013-12-23 15:06:13 +01:00
udma.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
usb-regs.h New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00
watchdog.c New Platform: TI CC2538 Development Kit 2013-04-06 21:07:31 +01:00