nes-proj/drivers/platform/nrf52dk/dev/button-sensor.c

331 lines
10 KiB
C

/*
* Copyright (c) 2015, Nordic Semiconductor
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``as-is'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup nrf52dk-devices Device drivers
* @{
*
* \addtogroup nrf52dk-devices-button Buttons driver
* @{
*
* \file
* Driver for nRF52 DK buttons.
* \author
* Wojciech Bober <wojciech.bober@nordicsemi.no>
*/
/*---------------------------------------------------------------------------*/
#include <stdint.h>
#include "nordic_common.h"
#include "nrf_drv_gpiote.h"
#include "nrf_assert.h"
#include "boards.h"
#include "contiki.h"
#include "lib/sensors.h"
#include "button-sensor.h"
/*---------------------------------------------------------------------------*/
#define DEBOUNCE_DURATION (CLOCK_SECOND >> 5) /**< Delay before button state is assumed to be stable */
/*---------------------------------------------------------------------------*/
struct btn_timer
{
struct timer debounce;
clock_time_t start;
clock_time_t duration;
};
static struct btn_timer btn_timer[BUTTONS_NUMBER];
static int btn_state = 0;
/*---------------------------------------------------------------------------*/
/**
* \brief Button toggle handler
* \param pin GPIO pin which has been triggered
* \param action toggle direction
*
*/
static void
gpiote_event_handler(nrf_drv_gpiote_pin_t pin, nrf_gpiote_polarity_t action)
{
int id = pin - BUTTON_START;
if(!timer_expired(&(btn_timer[id].debounce))) {
return;
}
/* Set timer to ignore consecutive changes for
* DEBOUNCE_DURATION.
*/
timer_set(&(btn_timer[id].debounce), DEBOUNCE_DURATION);
/*
* Start measuring duration on falling edge, stop on rising edge.
*/
if(nrf_drv_gpiote_in_is_set(pin) == 0) {
btn_timer[id].start = clock_time();
btn_timer[id].duration = 0;
} else {
btn_timer[id].duration = clock_time() - btn_timer[id].start;
}
sensors_changed(&buttons[id]);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Configuration function for the button sensor for all buttons.
*
* \param type if \a SENSORS_HW_INIT is passed the function will initialize
* given button
* if \a SENSORS_ACTIVE is passed then \p c parameter defines
* whether button should be set active or inactive
* \param c 0 to disable the button, non-zero: enable
* \param pin GPIOE pin number
*/
static int
config(int type, int c, nrf_drv_gpiote_pin_t pin)
{
int id = pin - BUTTON_START;
switch(type) {
case SENSORS_HW_INIT: {
nrf_drv_gpiote_in_config_t config = GPIOTE_CONFIG_IN_SENSE_TOGGLE(false);
config.pull = NRF_GPIO_PIN_PULLUP;
nrf_drv_gpiote_in_init(pin, &config, gpiote_event_handler);
timer_set(&(btn_timer[id].debounce), DEBOUNCE_DURATION);
return 1;
}
case SENSORS_ACTIVE: {
if(c) {
nrf_drv_gpiote_in_event_enable(pin, true);
btn_state |= (1 << id);
} else {
nrf_drv_gpiote_in_event_disable(pin);
btn_state &= ~(1 << id);
}
return 1;
}
default:
return 0;
}
}
/*---------------------------------------------------------------------------*/
/**
* \brief Configuration function for button 1
*
* \param type passed to config() as-is
* \param value passed to config() as-is
* \return same as config() return value
*/
static int
config_button_1(int type, int value)
{
return config(type, value, BSP_BUTTON_0);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Configuration function for button 2
*
* \param type passed to config() as-is
* \param value passed to config() as-is
* \return same as config() return value
*/
static int
config_button_2(int type, int value)
{
return config(type, value, BSP_BUTTON_1);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Configuration function for button 3
*
* \param type passed to config() as-is
* \param value passed to config() as-is
* \return same as config() return value
*/
static int
config_button_3(int type, int value)
{
return config(type, value, BSP_BUTTON_2);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Configuration function for button 4
*
* \param type passed to config() as-is
* \param value passed to config() as-is
* \return same as config() return value
*/
static int
config_button_4(int type, int value)
{
return config(type, value, BSP_BUTTON_3);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Return current state of a button
* \param type pass \ref BUTTON_SENSOR_VALUE_STATE to get current button state
* or \ref BUTTON_SENSOR_VALUE_DURATION to get active state duration
* \param pin GPIOE pin number
*
* \retval BUTTON_SENSOR_VALUE_PRESSED
* \retval BUTTON_SENSOR_VALUE_RELEASED when \a type is \ref BUTTON_SENSOR_VALUE_STATE
* \retval duration Active state duration in clock ticks
*/
static int
value(int type, nrf_drv_gpiote_pin_t pin)
{
if(type == BUTTON_SENSOR_VALUE_STATE) {
return nrf_drv_gpiote_in_is_set(pin) == 0 ?
BUTTON_SENSOR_VALUE_PRESSED : BUTTON_SENSOR_VALUE_RELEASED;
} else if(type == BUTTON_SENSOR_VALUE_DURATION) {
return btn_timer[pin - BUTTON_START].duration;
}
return 0;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Return current state of a button 1
* \param type passed to value() as-is
* \return same as value returned by value()
*/
static int
value_button_1(int type)
{
return value(type, BSP_BUTTON_0);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Return current state of a button 2
* \param type passed to value() as-is
* \return same as value returned by value()
*/
static int
value_button_2(int type)
{
return value(type, BSP_BUTTON_1);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Return current state of a button 3
* \param type passed to value() as-is
* \return same as value returned by value()
*/
static int
value_button_3(int type)
{
return value(type, BSP_BUTTON_2);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Return current state of a button 4
* \param type passed to value() as-is
* \return same as value returned by value()
*/
static int
value_button_4(int type)
{
return value(type, BSP_BUTTON_3);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get status of a given button
* \param type \a SENSORS_ACTIVE or \a SENSORS_READY
* \param pin GPIOE pin number
* \return 1 if the button's port interrupt is enabled
*/
static int
status(int type, nrf_drv_gpiote_pin_t pin)
{
switch(type) {
case SENSORS_ACTIVE:
case SENSORS_READY:
return (btn_state & (1 << (pin - BUTTON_START)));
default:
break;
}
return 0;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Status function for button 1
* \param type passed to state() as-is
* \return value returned by state()
*/
static int
status_button_1(int type)
{
return status(type, BSP_BUTTON_0);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Status function for button 2
* \param type passed to state() as-is
* \return value returned by state()
*/
static int
status_button_2(int type)
{
return status(type, BSP_BUTTON_1);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Status function for button 3
* \param type passed to state() as-is
* \return value returned by state()
*/
static int
status_button_3(int type)
{
return status(type, BSP_BUTTON_2);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Status function for button 3
* \param type passed to state() as-is
* \return value returned by state()
*/
static int
status_button_4(int type)
{
return status(type, BSP_BUTTON_3);
}
/*---------------------------------------------------------------------------*/
const struct sensors_sensor buttons[BUTTONS_NUMBER] = {
{BUTTON_SENSOR, value_button_1, config_button_1, status_button_1},
{BUTTON_SENSOR, value_button_2, config_button_2, status_button_2},
{BUTTON_SENSOR, value_button_3, config_button_3, status_button_3},
{BUTTON_SENSOR, value_button_4, config_button_4, status_button_4}, };
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/