nes-proj/arch/cpu/cc13xx-cc26xx/rf-settings/cc13x2/ieee-settings.c
2018-08-31 11:04:44 +02:00

299 lines
14 KiB
C

/*
* Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
// Parameter summary
// IEEE Channel: 11
// Frequency: 2405 MHz
// SFD: 0
// Packet Data: 255
// Preamble (32 bit): 01010101...
// For Default PA:
// TX Power: 5 dBm (requires define CCFG_FORCE_VDDR_HH = 0 in ccfg.c, see CC13xx/CC26xx Technical Reference Manual)
// Enable high output power PA: false
// For High PA:
// TX Power: 20 dBm (requires define CCFG_FORCE_VDDR_HH = 0 in ccfg.c, see CC13xx/CC26xx Technical Reference Manual)
// Enable high output power PA: true
/*---------------------------------------------------------------------------*/
#include "sys/cc.h"
/*---------------------------------------------------------------------------*/
#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(driverlib/rf_mailbox.h)
#include DeviceFamily_constructPath(driverlib/rf_common_cmd.h)
#include DeviceFamily_constructPath(driverlib/rf_ieee_cmd.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_cpe_ieee_802_15_4.h)
#include DeviceFamily_constructPath(rf_patches/rf_patch_mce_ieee_802_15_4.h)
#include <ti/drivers/rf/RF.h>
/*---------------------------------------------------------------------------*/
#include "ieee-settings.h"
/*---------------------------------------------------------------------------*/
// TI-RTOS RF Mode Object
RF_Mode rf_ieee_mode =
{
.rfMode = RF_MODE_AUTO,
.cpePatchFxn = &rf_patch_cpe_ieee_802_15_4,
.mcePatchFxn = &rf_patch_mce_ieee_802_15_4,
.rfePatchFxn = 0,
};
/*---------------------------------------------------------------------------*/
// TX Power table
// The RF_TxPowerTable_DEFAULT_PA_ENTRY macro is defined in RF.h and requires the following arguments:
// RF_TxPowerTable_DEFAULT_PA_ENTRY(bias, gain, boost coefficient)
// See the Technical Reference Manual for further details about the "txPower" Command field.
// The PA settings require the CCFG_FORCE_VDDR_HH = 0 unless stated otherwise.
RF_TxPowerTable_Entry rf_ieee_tx_power_table_default_pa[RF_IEEE_TX_POWER_TABLE_DEFAULT_PA_SIZE+1] =
{
{ -21, RF_TxPowerTable_DEFAULT_PA_ENTRY( 7, 3, 0, 3) },
{ -18, RF_TxPowerTable_DEFAULT_PA_ENTRY( 9, 3, 0, 3) },
{ -15, RF_TxPowerTable_DEFAULT_PA_ENTRY( 8, 2, 0, 6) },
{ -12, RF_TxPowerTable_DEFAULT_PA_ENTRY(10, 2, 0, 8) },
{ -10, RF_TxPowerTable_DEFAULT_PA_ENTRY(12, 2, 0, 11) },
{ -9, RF_TxPowerTable_DEFAULT_PA_ENTRY(13, 2, 0, 5) },
{ -6, RF_TxPowerTable_DEFAULT_PA_ENTRY(13, 1, 0, 16) },
{ -5, RF_TxPowerTable_DEFAULT_PA_ENTRY(14, 1, 0, 17) },
{ -3, RF_TxPowerTable_DEFAULT_PA_ENTRY(17, 1, 0, 20) },
{ 0, RF_TxPowerTable_DEFAULT_PA_ENTRY(25, 1, 0, 26) },
{ 1, RF_TxPowerTable_DEFAULT_PA_ENTRY(28, 1, 0, 28) },
{ 2, RF_TxPowerTable_DEFAULT_PA_ENTRY(13, 0, 0, 34) },
{ 3, RF_TxPowerTable_DEFAULT_PA_ENTRY(17, 0, 0, 42) },
{ 4, RF_TxPowerTable_DEFAULT_PA_ENTRY(22, 0, 0, 54) },
{ 5, RF_TxPowerTable_DEFAULT_PA_ENTRY(30, 0, 0, 74) },
RF_TxPowerTable_TERMINATION_ENTRY
};
/*---------------------------------------------------------------------------*/
// TX Power table
// The RF_TxPowerTable_HIGH_PA_ENTRY macro is defined in RF.h and requires the following arguments:
// RF_TxPowerTable_HIGH_PA_ENTRY(bias, ibboost, boost, coefficient, ldoTrim)
// See the Technical Reference Manual for further details about the "txPower" Command field.
// The PA settings require the CCFG_FORCE_VDDR_HH = 0 unless stated otherwise.
RF_TxPowerTable_Entry rf_ieee_tx_power_table_high_pa[RF_IEEE_TX_POWER_TABLE_HIGH_PA_SIZE+1] =
{
{ 0, RF_TxPowerTable_HIGH_PA_ENTRY(29, 0, 1, 17, 1) },
{ 3, RF_TxPowerTable_HIGH_PA_ENTRY(39, 0, 1, 20, 1) },
{ 6, RF_TxPowerTable_HIGH_PA_ENTRY(46, 0, 1, 26, 7) },
{ 9, RF_TxPowerTable_HIGH_PA_ENTRY(40, 0, 1, 39, 41) },
{ 10, RF_TxPowerTable_HIGH_PA_ENTRY(23, 2, 1, 65, 5) },
{ 11, RF_TxPowerTable_HIGH_PA_ENTRY(24, 2, 1, 29, 7) },
{ 12, RF_TxPowerTable_HIGH_PA_ENTRY(19, 2, 1, 16, 25) },
{ 13, RF_TxPowerTable_HIGH_PA_ENTRY(27, 2, 1, 19, 13) },
{ 14, RF_TxPowerTable_HIGH_PA_ENTRY(24, 2, 1, 19, 27) },
{ 15, RF_TxPowerTable_HIGH_PA_ENTRY(23, 2, 1, 20, 39) },
{ 16, RF_TxPowerTable_HIGH_PA_ENTRY(34, 2, 1, 26, 23) },
{ 17, RF_TxPowerTable_HIGH_PA_ENTRY(38, 2, 1, 33, 25) },
{ 18, RF_TxPowerTable_HIGH_PA_ENTRY(30, 2, 1, 37, 53) },
{ 19, RF_TxPowerTable_HIGH_PA_ENTRY(36, 2, 1, 57, 59) },
{ 20, RF_TxPowerTable_HIGH_PA_ENTRY(56, 2, 1, 45, 63) },
RF_TxPowerTable_TERMINATION_ENTRY
};
/*---------------------------------------------------------------------------*/
// Overrides for CMD_RADIO_SETUP
uint32_t rf_ieee_overrides_default_pa[] CC_ALIGN(4) =
{
// override_ieee_802_15_4.xml
MCE_RFE_OVERRIDE(1,0,0,0,1,0), // PHY: Use MCE RAM patch, RFE ROM bank 1
(uint32_t)0x02400403, // Synth: Use 48 MHz crystal, enable extra PLL filtering
(uint32_t)0x001C8473, // Synth: Configure extra PLL filtering
(uint32_t)0x00088433, // Synth: Configure synth hardware
(uint32_t)0x00038793, // Synth: Set minimum RTRIM to 3
HW32_ARRAY_OVERRIDE(0x4004,1), // Synth: Configure faster calibration
(uint32_t)0x1C0C0618, // Synth: Configure faster calibration
(uint32_t)0xC00401A1, // Synth: Configure faster calibration
(uint32_t)0x00010101, // Synth: Configure faster calibration
(uint32_t)0xC0040141, // Synth: Configure faster calibration
(uint32_t)0x00214AD3, // Synth: Configure faster calibration
(uint32_t)0x02980243, // Synth: Decrease synth programming time-out (0x0298 RAT ticks = 166 us)
(uint32_t)0xFCFC08C3, // DC/DC regulator: In Tx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4). In Rx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4).
(uint32_t)0x000F8883, // Rx: Set LNA bias current offset to +15 to saturate trim to max (default: 0)
(uint32_t)0xFFFFFFFF,
};
/*---------------------------------------------------------------------------*/
// Overrides for CMD_RADIO_SETUP
uint32_t rf_ieee_overrides_high_pa[] CC_ALIGN(4) =
{
// override_ieee_802_15_4.xml
MCE_RFE_OVERRIDE(1,0,0,0,1,0), // PHY: Use MCE RAM patch, RFE ROM bank 1
(uint32_t)0x02400403, // Synth: Use 48 MHz crystal, enable extra PLL filtering
(uint32_t)0x001C8473, // Synth: Configure extra PLL filtering
(uint32_t)0x00088433, // Synth: Configure synth hardware
(uint32_t)0x00038793, // Synth: Set minimum RTRIM to 3
HW32_ARRAY_OVERRIDE(0x4004,1), // Synth: Configure faster calibration
(uint32_t)0x1C0C0618, // Synth: Configure faster calibration
(uint32_t)0xC00401A1, // Synth: Configure faster calibration
(uint32_t)0x00010101, // Synth: Configure faster calibration
(uint32_t)0xC0040141, // Synth: Configure faster calibration
(uint32_t)0x00214AD3, // Synth: Configure faster calibration
(uint32_t)0x02980243, // Synth: Decrease synth programming time-out (0x0298 RAT ticks = 166 us)
(uint32_t)0xFCFC08C3, // DC/DC regulator: In Tx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4). In Rx, use DCDCCTL5[3:0]=0xC (DITHER_EN=1 and IPEAK=4).
(uint32_t)0x000F8883, // Rx: Set LNA bias current offset to +15 to saturate trim to max (default: 0)
// override_frontend_xd.xml
// TX power override
(uint32_t)0xFD6EE02B, // txHighPA=0x3F5BB8
(uint32_t)0xFFFFFFFF,
};
/*---------------------------------------------------------------------------*/
// CMD_RADIO_SETUP
// Radio Setup Command for Pre-Defined Schemes
rfc_CMD_RADIO_SETUP_t rf_cmd_ieee_radio_setup =
{
.commandNo = CMD_RADIO_SETUP,
.status = IDLE,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = COND_NEVER,
.condition.nSkip = 0x0,
.mode = 0x01,
.loDivider = 0x00,
.config.frontEndMode = 0x0,
.config.biasMode = 0x1,
.config.analogCfgMode = 0x0,
.config.bNoFsPowerUp = 0x0,
.txPower = 0x941E, /* 5 dBm default */
.pRegOverride = rf_ieee_overrides_default_pa,
};
/*---------------------------------------------------------------------------*/
// CMD_FS
// Frequency Synthesizer Programming Command
rfc_CMD_FS_t rf_cmd_ieee_fs =
{
.commandNo = CMD_FS,
.status = IDLE,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = COND_NEVER,
.condition.nSkip = 0x0,
.frequency = 0x0965, /* set by driver */
.fractFreq = 0x0000, /* set by driver */
.synthConf.bTxMode = 0x1,
.synthConf.refFreq = 0x0,
.__dummy0 = 0x00,
.__dummy1 = 0x00,
.__dummy2 = 0x00,
.__dummy3 = 0x0000,
};
/*---------------------------------------------------------------------------*/
// CMD_IEEE_TX
// IEEE 802.15.4 Transmit Command
rfc_CMD_IEEE_TX_t rf_cmd_ieee_tx =
{
.commandNo = CMD_IEEE_TX,
.status = IDLE,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = COND_NEVER,
.condition.nSkip = 0x0,
.txOpt.bIncludePhyHdr = 0x0,
.txOpt.bIncludeCrc = 0x0,
.txOpt.payloadLenMsb = 0x0,
.payloadLen = 0x0, /* set by driver */
.pPayload = 0, /* set by driver */
.timeStamp = 0x00000000,
};
/*---------------------------------------------------------------------------*/
// CMD_IEEE_RX
// IEEE 802.15.4 Receive Command
rfc_CMD_IEEE_RX_t rf_cmd_ieee_rx =
{
.commandNo = CMD_IEEE_RX,
.status = IDLE,
.pNextOp = 0,
.startTime = 0x00000000,
.startTrigger.triggerType = TRIG_NOW,
.startTrigger.bEnaCmd = 0x0,
.startTrigger.triggerNo = 0x0,
.startTrigger.pastTrig = 0x0,
.condition.rule = COND_NEVER,
.condition.nSkip = 0x0,
.channel = 0x00, /* set by driver */
.rxConfig.bAutoFlushCrc = 0x1,
.rxConfig.bAutoFlushIgn = 0x0,
.rxConfig.bIncludePhyHdr = 0x0,
.rxConfig.bIncludeCrc = 0x1,
.rxConfig.bAppendRssi = 0x1,
.rxConfig.bAppendCorrCrc = 0x1,
.rxConfig.bAppendSrcInd = 0x0,
.rxConfig.bAppendTimestamp = 0x1,
.pRxQ = 0, /* set by driver */
.pOutput = 0, /* set by driver */
.frameFiltOpt.frameFiltEn = 0x0, /* set by driver */
.frameFiltOpt.frameFiltStop = 0x1,
.frameFiltOpt.autoAckEn = 0x0, /* set by driver */
.frameFiltOpt.slottedAckEn = 0x0,
.frameFiltOpt.autoPendEn = 0x0,
.frameFiltOpt.defaultPend = 0x0,
.frameFiltOpt.bPendDataReqOnly = 0x0,
.frameFiltOpt.bPanCoord = 0x0,
.frameFiltOpt.maxFrameVersion = 0x2,
.frameFiltOpt.fcfReservedMask = 0x0,
.frameFiltOpt.modifyFtFilter = 0x0,
.frameFiltOpt.bStrictLenFilter = 0x0,
.frameTypes.bAcceptFt0Beacon = 0x1,
.frameTypes.bAcceptFt1Data = 0x1,
.frameTypes.bAcceptFt2Ack = 0x1,
.frameTypes.bAcceptFt3MacCmd = 0x1,
.frameTypes.bAcceptFt4Reserved = 0x1,
.frameTypes.bAcceptFt5Reserved = 0x1,
.frameTypes.bAcceptFt6Reserved = 0x1,
.frameTypes.bAcceptFt7Reserved = 0x1,
.ccaOpt.ccaEnEnergy = 0x1,
.ccaOpt.ccaEnCorr = 0x1,
.ccaOpt.ccaEnSync = 0x1,
.ccaOpt.ccaCorrOp = 0x1,
.ccaOpt.ccaSyncOp = 0x0,
.ccaOpt.ccaCorrThr = 0x3,
.ccaRssiThr = 0x0, /* set by driver */
.__dummy0 = 0x00,
.numExtEntries = 0x00,
.numShortEntries = 0x00,
.pExtEntryList = 0,
.pShortEntryList = 0,
.localExtAddr = 0x0, /* set by driver */
.localShortAddr = 0x0, /* set by driver */
.localPanID = 0x0000,
.__dummy1 = 0x000000,
.endTrigger.triggerType = TRIG_NEVER,
.endTrigger.bEnaCmd = 0x0,
.endTrigger.triggerNo = 0x0,
.endTrigger.pastTrig = 0x0,
.endTime = 0x00000000,
};
/*---------------------------------------------------------------------------*/