nes-proj/core/net/packetbuf.h

330 lines
10 KiB
C

/*
* Copyright (c) 2006, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \file
* Header file for the Rime buffer (packetbuf) management
* \author
* Adam Dunkels <adam@sics.se>
*/
/**
* \addtogroup rime
* @{
*/
/**
* \defgroup packetbuf Rime buffer management
* @{
*
* The packetbuf module does Rime's buffer management.
*/
#ifndef PACKETBUF_H_
#define PACKETBUF_H_
#include "contiki-conf.h"
#include "net/linkaddr.h"
#include "net/llsec802154.h"
#include "net/mac/tsch/tsch-conf.h"
/**
* \brief The size of the packetbuf, in bytes
*/
#ifdef PACKETBUF_CONF_SIZE
#define PACKETBUF_SIZE PACKETBUF_CONF_SIZE
#else
#define PACKETBUF_SIZE 128
#endif
/**
* \brief Clear and reset the packetbuf
*
* This function clears the packetbuf and resets all
* internal state pointers (header size, header pointer,
* external data pointer). It is used before preparing a
* packet in the packetbuf.
*
*/
void packetbuf_clear(void);
/**
* \brief Get a pointer to the data in the packetbuf
* \return Pointer to the packetbuf data
*
* This function is used to get a pointer to the data in
* the packetbuf. The data is either stored in the packetbuf,
* or referenced to an external location.
*
*/
void *packetbuf_dataptr(void);
/**
* \brief Get a pointer to the header in the packetbuf, for outbound packets
* \return Pointer to the packetbuf header
*
*/
void *packetbuf_hdrptr(void);
/**
* \brief Get the length of the header in the packetbuf
* \return Length of the header in the packetbuf
*
*/
uint8_t packetbuf_hdrlen(void);
/**
* \brief Get the length of the data in the packetbuf
* \return Length of the data in the packetbuf
*
*/
uint16_t packetbuf_datalen(void);
/**
* \brief Get the total length of the header and data in the packetbuf
* \return Length of data and header in the packetbuf
*
*/
uint16_t packetbuf_totlen(void);
/**
* \brief Get the total length of the remaining space in the packetbuf
* \return Length of the remaining space in the packetbuf
*
*/
uint16_t packetbuf_remaininglen(void);
/**
* \brief Set the length of the data in the packetbuf
* \param len The length of the data
*/
void packetbuf_set_datalen(uint16_t len);
/**
* \brief Compact the packetbuf
*
* This function compacts the packetbuf by copying the data
* portion of the packetbuf so that becomes consecutive to
* the header.
*
* This function is called by the Rime code before a
* packet is to be sent by a device driver. This assures
* that the entire packet is consecutive in memory.
*
*/
void packetbuf_compact(void);
/**
* \brief Copy from external data into the packetbuf
* \param from A pointer to the data from which to copy
* \param len The size of the data to copy
* \retval The number of bytes that was copied into the packetbuf
*
* This function copies data from a pointer into the
* packetbuf. If the data that is to be copied is larger
* than the packetbuf, only the data that fits in the
* packetbuf is copied. The number of bytes that could be
* copied into the rimbuf is returned.
*
*/
int packetbuf_copyfrom(const void *from, uint16_t len);
/**
* \brief Copy the entire packetbuf to an external buffer
* \param to A pointer to the buffer to which the data is to be copied
* \retval The number of bytes that was copied to the external buffer
*
* This function copies the packetbuf to an external
* buffer. Both the data portion and the header portion of
* the packetbuf is copied.
*
* The external buffer to which the packetbuf is to be
* copied must be able to accomodate at least
* PACKETBUF_SIZE bytes. The number of
* bytes that was copied to the external buffer is
* returned.
*
*/
int packetbuf_copyto(void *to);
/**
* \brief Extend the header of the packetbuf, for outbound packets
* \param size The number of bytes the header should be extended
* \retval Non-zero if the header could be extended, zero otherwise
*
* This function is used to allocate extra space in the
* header portion in the packetbuf, when preparing outbound
* packets for transmission. If the function is unable to
* allocate sufficient header space, the function returns
* zero and does not allocate anything.
*
*/
int packetbuf_hdralloc(int size);
/**
* \brief Reduce the header in the packetbuf, for incoming packets
* \param size The number of bytes the header should be reduced
* \retval Non-zero if the header could be reduced, zero otherwise
*
* This function is used to remove the first part of the
* header in the packetbuf, when processing incoming
* packets. If the function is unable to remove the
* requested amount of header space, the function returns
* zero and does not allocate anything.
*
*/
int packetbuf_hdrreduce(int size);
/* Packet attributes stuff below: */
typedef uint16_t packetbuf_attr_t;
struct packetbuf_attr {
packetbuf_attr_t val;
};
struct packetbuf_addr {
linkaddr_t addr;
};
#define PACKETBUF_ATTR_PACKET_TYPE_DATA 0
#define PACKETBUF_ATTR_PACKET_TYPE_ACK 1
#define PACKETBUF_ATTR_PACKET_TYPE_STREAM 2
#define PACKETBUF_ATTR_PACKET_TYPE_STREAM_END 3
#define PACKETBUF_ATTR_PACKET_TYPE_TIMESTAMP 4
enum {
PACKETBUF_ATTR_NONE,
/* Scope 0 attributes: used only on the local node. */
PACKETBUF_ATTR_CHANNEL,
PACKETBUF_ATTR_NETWORK_ID,
PACKETBUF_ATTR_LINK_QUALITY,
PACKETBUF_ATTR_RSSI,
PACKETBUF_ATTR_TIMESTAMP,
PACKETBUF_ATTR_MAC_SEQNO,
PACKETBUF_ATTR_MAC_ACK,
#if TSCH_WITH_LINK_SELECTOR
PACKETBUF_ATTR_TSCH_SLOTFRAME,
PACKETBUF_ATTR_TSCH_TIMESLOT,
#endif /* TSCH_WITH_LINK_SELECTOR */
/* Scope 1 attributes: used between two neighbors only. */
PACKETBUF_ATTR_FRAME_TYPE,
#if LLSEC802154_USES_AUX_HEADER
PACKETBUF_ATTR_SECURITY_LEVEL,
#endif /* LLSEC802154_USES_AUX_HEADER */
#if LLSEC802154_USES_EXPLICIT_KEYS
PACKETBUF_ATTR_KEY_ID_MODE,
PACKETBUF_ATTR_KEY_INDEX,
PACKETBUF_ATTR_KEY_SOURCE_BYTES_0_1,
#endif /* LLSEC802154_USES_EXPLICIT_KEYS */
/* Scope 2 attributes: used between end-to-end nodes. */
/* These must be last */
PACKETBUF_ADDR_SENDER,
PACKETBUF_ADDR_RECEIVER,
PACKETBUF_ATTR_MAX
};
#define PACKETBUF_NUM_ADDRS 2
#define PACKETBUF_NUM_ATTRS (PACKETBUF_ATTR_MAX - PACKETBUF_NUM_ADDRS)
#define PACKETBUF_ADDR_FIRST PACKETBUF_ADDR_SENDER
#define PACKETBUF_IS_ADDR(type) ((type) >= PACKETBUF_ADDR_FIRST)
#if PACKETBUF_CONF_ATTRS_INLINE
extern struct packetbuf_attr packetbuf_attrs[];
extern struct packetbuf_addr packetbuf_addrs[];
static inline int
packetbuf_set_attr(uint8_t type, const packetbuf_attr_t val)
{
packetbuf_attrs[type].val = val;
return 1;
}
static inline packetbuf_attr_t
packetbuf_attr(uint8_t type)
{
return packetbuf_attrs[type].val;
}
static inline int
packetbuf_set_addr(uint8_t type, const linkaddr_t *addr)
{
linkaddr_copy(&packetbuf_addrs[type - PACKETBUF_ADDR_FIRST].addr, addr);
return 1;
}
static inline const linkaddr_t *
packetbuf_addr(uint8_t type)
{
return &packetbuf_addrs[type - PACKETBUF_ADDR_FIRST].addr;
}
#else /* PACKETBUF_CONF_ATTRS_INLINE */
int packetbuf_set_attr(uint8_t type, const packetbuf_attr_t val);
packetbuf_attr_t packetbuf_attr(uint8_t type);
int packetbuf_set_addr(uint8_t type, const linkaddr_t *addr);
const linkaddr_t *packetbuf_addr(uint8_t type);
#endif /* PACKETBUF_CONF_ATTRS_INLINE */
/**
* \brief Checks whether the current packet is a broadcast.
* \retval 0 iff current packet is not a broadcast
*/
int packetbuf_holds_broadcast(void);
void packetbuf_attr_clear(void);
void packetbuf_attr_copyto(struct packetbuf_attr *attrs,
struct packetbuf_addr *addrs);
void packetbuf_attr_copyfrom(struct packetbuf_attr *attrs,
struct packetbuf_addr *addrs);
#define PACKETBUF_ATTRIBUTES(...) { __VA_ARGS__ PACKETBUF_ATTR_LAST }
#define PACKETBUF_ATTR_LAST { PACKETBUF_ATTR_NONE, 0 }
#define PACKETBUF_ATTR_BIT 1
#define PACKETBUF_ATTR_BYTE 8
#define PACKETBUF_ADDRSIZE (LINKADDR_SIZE * PACKETBUF_ATTR_BYTE)
struct packetbuf_attrlist {
uint8_t type;
uint8_t len;
};
#endif /* PACKETBUF_H_ */
/** @} */
/** @} */