nes-proj/arch/dev/rgb-led/rgb-led.h

90 lines
3.5 KiB
C

/*
* Copyright (c) 2018, George Oikonomou - http://www.spd.gr
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
#ifndef RGB_LED_H_
#define RGB_LED_H_
/*---------------------------------------------------------------------------*/
/**
* \addtogroup dev
* @{
*/
/*---------------------------------------------------------------------------*/
/**
* \defgroup rgb-led Generic RGB LED driver
*
* This is a driver for a tri-color RGB LED part, such as for example the
* Broadcom (ex Avago Technologies) PLCC-4 Tricolor Black Surface LED present
* on all Zolertia Zoul-based boards.
*
*
* This driver sits on top of the LED HAL. Therefore, any port that wishes to
* use this driver should first implement the GPIO HAL and the new LED API.
* This driver will set the colour of the RGB LED by using combinations of
* LED_RED, LED_GREEN and LED_BLUE. Therefore, those must be correctly defined
* by the platform configuration.
* @{
*
* \file
* Header file for the RGB LED driver.
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
#define RGB_LED_RED 1
#define RGB_LED_GREEN 2
#define RGB_LED_BLUE 4
#define RGB_LED_MAGENTA (RGB_LED_RED | RGB_LED_BLUE)
#define RGB_LED_YELLOW (RGB_LED_RED | RGB_LED_GREEN)
#define RGB_LED_CYAN (RGB_LED_GREEN | RGB_LED_BLUE )
#define RGB_LED_WHITE (RGB_LED_RED | RGB_LED_GREEN | RGB_LED_BLUE)
/*---------------------------------------------------------------------------*/
/**
* \brief Turn off the RGB LED
*/
void rgb_led_off(void);
/**
* \brief Set the colour of the RGB LED
* \param colour The colour to set
*
* \e colour can take the value of one of the RGB_LED_xyz defines.
*/
void rgb_led_set(uint8_t colour);
/*---------------------------------------------------------------------------*/
#endif /* RGB_LED_H_ */
/*---------------------------------------------------------------------------*/
/**
* @}
* @}
*/