giomba/nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
cbecd8c122
nes-proj/examples/platform-specific/jn516x/tsch/tx-power-verification
History
George Oikonomou a05a6b59d0 Remove all unnecessary BAUD2UBR macro definitions
2017-10-31 21:56:38 +00:00
..
node Allow overriding common example configuration 2017-10-08 17:03:05 +01:00
rpl-border-router Remove all unnecessary BAUD2UBR macro definitions 2017-10-31 21:56:38 +00:00
README.md Re-arrange examples, in particular, move platform-specific examples to examples/platform-specific 2017-05-16 17:47:57 +02:00

README.md

The tx-power-control example can be used to check the link between a node and an rpl-border-router. After a link is established, the following coap rresources are exposed:

node: Set-Tx-Power: a PUT/POST resource to set the TX power of the device. The firmware in the device will set the TX power to the nearest available value. Get-Tx-Power: a GET resource to retrieve the actual Tx power that is set.

rpl-border-router: Get-RSSI: a GET resource that shows the detected energy level Get-Last-RSSI:a GET resource that shows the RSSI of the last received packet. When there is only 1 node, Get-Last-RSSI will show the effect of changing the TX power level on that node.