nes-proj/cpu/cc2538/dev/ecc-driver.c
Benoît Thébaudeau f78a132395 cc2538: pka: Fix include paths breakage
The PKA drivers and examples were full of include paths missing the
appropriate prefix, or using angle brackets instead of double quotes or
the other way around.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:13 +01:00

560 lines
16 KiB
C

/*
* Original file:
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Port to Contiki:
* Copyright (c) 2014 Andreas Dröscher <contiki@anticat.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538-ecc
* @{
*
* \file
* Implementation of the cc2538 ECC driver
*/
#include "dev/ecc-driver.h"
#include "reg.h"
#include "dev/nvic.h"
#define ASSERT(IF) if(!(IF)) { return PKA_STATUS_INVALID_PARAM; }
/*---------------------------------------------------------------------------*/
uint8_t
ecc_mul_start(uint32_t *scalar, ec_point_t *ec_point,
ecc_curve_info_t *curve, uint32_t *result_vector,
struct process *process)
{
uint8_t extraBuf;
uint32_t offset;
int i;
/* Check for the arguments. */
ASSERT(NULL != scalar);
ASSERT(NULL != ec_point);
ASSERT(NULL != ec_point->x);
ASSERT(NULL != ec_point->y);
ASSERT(NULL != curve);
ASSERT(curve->size <= PKA_MAX_CURVE_SIZE);
ASSERT(NULL != result_vector);
offset = 0;
/* Make sure no PKA operation is in progress. */
if((REG(PKA_FUNCTION) & PKA_FUNCTION_RUN) != 0) {
return PKA_STATUS_OPERATION_INPRG;
}
/* Calculate the extra buffer requirement. */
extraBuf = 2 + curve->size % 2;
/* Update the A ptr with the offset address of the PKA RAM location
* where the scalar will be stored. */
REG(PKA_APTR) = offset >> 2;
/* Load the scalar in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = *scalar++;
}
/* Determine the offset for the next data. */
offset += 4 * (i + (curve->size % 2));
/* Update the B ptr with the offset address of the PKA RAM location
* where the curve parameters will be stored. */
REG(PKA_BPTR) = offset >> 2;
/* Write curve parameter 'p' as 1st part of vector B immediately
* following vector A at PKA RAM */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->prime[i];
}
/* Determine the offset for the next data. */
offset += 4 * (i + extraBuf);
/* Copy curve parameter 'a' in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->a[i];
}
/* Determine the offset for the next data. */
offset += 4 * (i + extraBuf);
/* Copy curve parameter 'b' in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->b[i];
}
/* Determine the offset for the next data. */
offset += 4 * (i + extraBuf);
/* Update the C ptr with the offset address of the PKA RAM location
* where the x, y will be stored. */
REG(PKA_CPTR) = offset >> 2;
/* Write elliptic curve point.x co-ordinate value. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = ec_point->x[i];
}
/* Determine the offset for the next data. */
offset += 4 * (i + extraBuf);
/* Write elliptic curve point.y co-ordinate value. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = ec_point->y[i];
}
/* Determine the offset for the next data. */
offset += 4 * (i + extraBuf);
/* Update the result location. */
*result_vector = PKA_RAM_BASE + offset;
/* Load D ptr with the result location in PKA RAM. */
REG(PKA_DPTR) = offset >> 2;
/* Load length registers. */
REG(PKA_ALENGTH) = curve->size;
REG(PKA_BLENGTH) = curve->size;
/* set the PKA function to ECC-MULT and start the operation. */
REG(PKA_FUNCTION) = 0x0000D000;
/* Enable Interrupt */
if(process != NULL) {
pka_register_process_notification(process);
nvic_interrupt_unpend(NVIC_INT_PKA);
nvic_interrupt_enable(NVIC_INT_PKA);
}
return PKA_STATUS_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
ecc_mul_get_result(ec_point_t *ec_point,
uint32_t result_vector)
{
int i;
uint32_t addr;
uint32_t regMSWVal;
uint32_t len;
/* Check for the arguments. */
ASSERT(NULL != ec_point);
ASSERT(NULL != ec_point->x);
ASSERT(NULL != ec_point->y);
ASSERT(result_vector > PKA_RAM_BASE);
ASSERT(result_vector < (PKA_RAM_BASE + PKA_RAM_SIZE));
/* Verify that the operation is completed. */
if((REG(PKA_FUNCTION) & PKA_FUNCTION_RUN) != 0) {
return PKA_STATUS_OPERATION_INPRG;
}
/* Disable Interrupt */
nvic_interrupt_disable(NVIC_INT_PKA);
pka_register_process_notification(NULL);
if(REG(PKA_SHIFT) == 0x00000000) {
/* Get the MSW register value. */
regMSWVal = REG(PKA_MSW);
/* Check to make sure that the result vector is not all zeroes. */
if(regMSWVal & PKA_MSW_RESULT_IS_ZERO) {
return PKA_STATUS_RESULT_0;
}
/* Get the length of the result */
len = ((regMSWVal & PKA_MSW_MSW_ADDRESS_M) + 1)
- ((result_vector - PKA_RAM_BASE) >> 2);
addr = result_vector;
/* copy the x co-ordinate value of the result from vector D into
* the \e ec_point. */
for(i = 0; i < len; i++) {
ec_point->x[i] = REG(addr + 4 * i);
}
addr += 4 * (i + 2 + len % 2);
/* copy the y co-ordinate value of the result from vector D into
* the \e ec_point. */
for(i = 0; i < len; i++) {
ec_point->y[i] = REG(addr + 4 * i);
}
return PKA_STATUS_SUCCESS;
} else {
return PKA_STATUS_FAILURE;
}
}
/*---------------------------------------------------------------------------*/
uint8_t
ecc_mul_gen_pt_start(uint32_t *scalar, ecc_curve_info_t *curve,
uint32_t *result_vector, struct process *process)
{
uint8_t extraBuf;
uint32_t offset;
int i;
/* check for the arguments. */
ASSERT(NULL != scalar);
ASSERT(NULL != curve);
ASSERT(curve->size <= PKA_MAX_CURVE_SIZE);
ASSERT(NULL != result_vector);
offset = 0;
/* Make sure no operation is in progress. */
if((REG(PKA_FUNCTION) & PKA_FUNCTION_RUN) != 0) {
return PKA_STATUS_OPERATION_INPRG;
}
/* Calculate the extra buffer requirement. */
extraBuf = 2 + curve->size % 2;
/* Update the A ptr with the offset address of the PKA RAM location
* where the scalar will be stored. */
REG(PKA_APTR) = offset >> 2;
/* Load the scalar in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = *scalar++;
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + (curve->size % 2));
/* Update the B ptr with the offset address of the PKA RAM location
* where the curve parameters will be stored. */
REG(PKA_BPTR) = offset >> 2;
/* Write curve parameter 'p' as 1st part of vector B. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->prime[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Write curve parameter 'a' in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->a[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* write curve parameter 'b' in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->b[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Update the C ptr with the offset address of the PKA RAM location
* where the x, y will be stored. */
REG(PKA_CPTR) = offset >> 2;
/* Write x co-ordinate value of the Generator point in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->x[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Write y co-ordinate value of the Generator point in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->y[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Update the result location. */
*result_vector = PKA_RAM_BASE + offset;
/* Load D ptr with the result location in PKA RAM. */
REG(PKA_DPTR) = offset >> 2;
/* Load length registers. */
REG(PKA_ALENGTH) = curve->size;
REG(PKA_BLENGTH) = curve->size;
/* Set the PKA function to ECC-MULT and start the operation. */
REG(PKA_FUNCTION) = 0x0000D000;
/* Enable Interrupt */
if(process != NULL) {
pka_register_process_notification(process);
nvic_interrupt_unpend(NVIC_INT_PKA);
nvic_interrupt_enable(NVIC_INT_PKA);
}
return PKA_STATUS_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
ecc_mul_gen_pt_get_result(ec_point_t *ec_point,
uint32_t result_vector)
{
int i;
uint32_t regMSWVal;
uint32_t addr;
uint32_t len;
/* Check for the arguments. */
ASSERT(NULL != ec_point);
ASSERT(NULL != ec_point->x);
ASSERT(NULL != ec_point->y);
ASSERT(result_vector > PKA_RAM_BASE);
ASSERT(result_vector < (PKA_RAM_BASE + PKA_RAM_SIZE));
/* Verify that the operation is completed. */
if((REG(PKA_FUNCTION) & PKA_FUNCTION_RUN) != 0) {
return PKA_STATUS_OPERATION_INPRG;
}
/* Disable Interrupt */
nvic_interrupt_disable(NVIC_INT_PKA);
pka_register_process_notification(NULL);
if(REG(PKA_SHIFT) == 0x00000000) {
/* Get the MSW register value. */
regMSWVal = REG(PKA_MSW);
/* Check to make sure that the result vector is not all zeroes. */
if(regMSWVal & PKA_MSW_RESULT_IS_ZERO) {
return PKA_STATUS_RESULT_0;
}
/* Get the length of the result. */
len = ((regMSWVal & PKA_MSW_MSW_ADDRESS_M) + 1)
- ((result_vector - PKA_RAM_BASE) >> 2);
addr = result_vector;
/* Copy the x co-ordinate value of the result from vector D into the
* EC point. */
for(i = 0; i < len; i++) {
ec_point->x[i] = REG(addr + 4 * i);
}
addr += 4 * (i + 2 + len % 2);
/* Copy the y co-ordinate value of the result from vector D into the
* EC point. */
for(i = 0; i < len; i++) {
ec_point->y[i] = REG(addr + 4 * i);
}
return PKA_STATUS_SUCCESS;
} else {
return PKA_STATUS_FAILURE;
}
}
/*---------------------------------------------------------------------------*/
uint8_t
ecc_add_start(ec_point_t *ec_point1, ec_point_t *ec_point2,
ecc_curve_info_t *curve, uint32_t *result_vector,
struct process *process)
{
uint8_t extraBuf;
uint32_t offset;
int i;
/* Check for the arguments. */
ASSERT(NULL != ec_point1);
ASSERT(NULL != ec_point1->x);
ASSERT(NULL != ec_point1->y);
ASSERT(NULL != ec_point2);
ASSERT(NULL != ec_point2->x);
ASSERT(NULL != ec_point2->y);
ASSERT(NULL != curve);
ASSERT(NULL != result_vector);
offset = 0;
/* Make sure no operation is in progress. */
if((REG(PKA_FUNCTION) & PKA_FUNCTION_RUN) != 0) {
return PKA_STATUS_OPERATION_INPRG;
}
/* Calculate the extra buffer requirement. */
extraBuf = 2 + curve->size % 2;
/* Update the A ptr with the offset address of the PKA RAM location
* where the first ecPt will be stored. */
REG(PKA_APTR) = offset >> 2;
/* Load the x co-ordinate value of the first EC point in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = ec_point1->x[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Load the y co-ordinate value of the first EC point in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = ec_point1->y[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Update the B ptr with the offset address of the PKA RAM location
* where the curve parameters will be stored. */
REG(PKA_BPTR) = offset >> 2;
/* Write curve parameter 'p' as 1st part of vector B */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->prime[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Write curve parameter 'a'. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = (uint32_t)curve->a[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Update the C ptr with the offset address of the PKA RAM location
* where the ecPt2 will be stored. */
REG(PKA_CPTR) = offset >> 2;
/* Load the x co-ordinate value of the second EC point in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = ec_point2->x[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Load the y co-ordinate value of the second EC point in PKA RAM. */
for(i = 0; i < curve->size; i++) {
REG(PKA_RAM_BASE + offset + 4 * i) = ec_point2->y[i];
}
/* Determine the offset in PKA RAM for the next data. */
offset += 4 * (i + extraBuf);
/* Copy the result vector location. */
*result_vector = PKA_RAM_BASE + offset;
/* Load D ptr with the result location in PKA RAM. */
REG(PKA_DPTR) = offset >> 2;
/* Load length registers. */
REG(PKA_BLENGTH) = curve->size;
/* Set the PKA Function to ECC-ADD and start the operation. */
REG(PKA_FUNCTION) = 0x0000B000;
/* Enable Interrupt */
if(process != NULL) {
pka_register_process_notification(process);
nvic_interrupt_unpend(NVIC_INT_PKA);
nvic_interrupt_enable(NVIC_INT_PKA);
}
return PKA_STATUS_SUCCESS;
}
/*---------------------------------------------------------------------------*/
uint8_t
ecc_add_get_result(ec_point_t *ec_point, uint32_t result_vector)
{
uint32_t regMSWVal;
uint32_t addr;
int i;
uint32_t len;
/* Check for the arguments. */
ASSERT(NULL != ec_point);
ASSERT(NULL != ec_point->x);
ASSERT(NULL != ec_point->y);
ASSERT(result_vector > PKA_RAM_BASE);
ASSERT(result_vector < (PKA_RAM_BASE + PKA_RAM_SIZE));
if((REG(PKA_FUNCTION) & PKA_FUNCTION_RUN) != 0) {
return PKA_STATUS_OPERATION_INPRG;
}
/* Disable Interrupt */
nvic_interrupt_disable(NVIC_INT_PKA);
pka_register_process_notification(NULL);
if(REG(PKA_SHIFT) == 0x00000000) {
/* Get the MSW register value. */
regMSWVal = REG(PKA_MSW);
/* Check to make sure that the result vector is not all zeroes. */
if(regMSWVal & PKA_MSW_RESULT_IS_ZERO) {
return PKA_STATUS_RESULT_0;
}
/* Get the length of the result. */
len = ((regMSWVal & PKA_MSW_MSW_ADDRESS_M) + 1)
- ((result_vector - PKA_RAM_BASE) >> 2);
addr = result_vector;
/* Copy the x co-ordinate value of result from vector D into the
* the output EC Point. */
for(i = 0; i < len; i++) {
ec_point->x[i] = REG(addr + 4 * i);
}
addr += 4 * (i + 2 + len % 2);
/* Copy the y co-ordinate value of result from vector D into the
* the output EC Point. */
for(i = 0; i < len; i++) {
ec_point->y[i] = REG(addr + 4 * i);
}
return PKA_STATUS_SUCCESS;
} else {
return PKA_STATUS_FAILURE;
}
}
/** @} */