nes-proj/cpu/cc2538/dev/ecc-driver.h
Benoît Thébaudeau f78a132395 cc2538: pka: Fix include paths breakage
The PKA drivers and examples were full of include paths missing the
appropriate prefix, or using angle brackets instead of double quotes or
the other way around.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:13 +01:00

228 lines
9.1 KiB
C

/*
* Original file:
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
* All rights reserved.
*
* Port to Contiki:
* Copyright (c) 2014 Andreas Dröscher <contiki@anticat.ch>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
* \addtogroup cc2538-pka
* @{
*
* \defgroup cc2538-ecc cc2538 ECC driver
*
* Driver for the cc2538 ECC mode of the PKC engine
* @{
*
* \file
* Header file for the cc2538 ECC driver
*/
#ifndef ECC_DRIVER_H_
#define ECC_DRIVER_H_
#include "contiki.h"
#include "dev/pka.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
/** \name ECC structures
* @{
*/
typedef struct {
const char *name; /**< Name of the curve. */
const uint8_t size; /**< Size of the curve in 32-bit word. */
const uint32_t *prime; /**< The prime that defines the field of the curve. */
const uint32_t *n; /**< Order of the curve. */
const uint32_t *a; /**< Co-efficient a of the equation. */
const uint32_t *b; /**< co-efficient b of the equation. */
const uint32_t *x; /**< x co-ordinate value of the generator point. */
const uint32_t *y; /**< y co-ordinate value of the generator point. */
} ecc_curve_info_t;
typedef struct {
uint32_t x[12]; /**< Pointer to value of the x co-ordinate. */
uint32_t y[12]; /**< Pointer to value of the y co-ordinate. */
} ec_point_t;
/** @} */
/*---------------------------------------------------------------------------*/
/** \name ECC functions
* \note Not all sequencer functions are implemented in this driver
* look at the CC2538 manual for a complete list.
* @{
*/
/** \brief Starts ECC Multiplication.
*
* \param scalar Pointer to the buffer containing the scalar
* value to be multiplied.
* \param ec_point Pointer to the structure containing the
* elliptic curve point to be multiplied. The point should be
* on the given curve.
* \param curve Pointer to the structure containing the curve
* info.
* \param result_vector Pointer to the result vector location
* which will be set by this function.
* \param process Process to be polled upon completion of the
* operation, or \c NULL
*
* This function starts the Elliptical curve cryptography (ECC) point
* multiplication operation on the EC point and the scalar value.
*
* \retval PKA_STATUS_SUCCESS if successful in starting the operation.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy doing
* some other operation.
*/
uint8_t ecc_mul_start(uint32_t *scalar,
ec_point_t *ec_point,
ecc_curve_info_t *curve,
uint32_t *result_vector,
struct process *process);
/** \brief Gets the result of ECC Multiplication
*
* \param ec_point Pointer to the structure where the resultant EC
* point will be stored. The callee is responsible to allocate the
* space for the ec point structure and the x and y co-ordinate as well.
* \param result_vector Address of the result location which
* was provided by the start function \sa PKAECCMultiplyStart().
*
* This function gets the result of ecc point multiplication operation on the
* ec point and the scalar value, previously started using the function
* \sa PKAECCMultiplyStart().
*
* \retval PKA_STATUS_SUCCESS if the operation is successful.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy performing
* the operation.
* \retval PKA_STATUS_RESULT_0 if the result is all zeroes.
* \retval PKA_STATUS_FAILURE if the operation is not successful.
*/
uint8_t ecc_mul_get_result(ec_point_t *ec_point,
uint32_t result_vector);
/** \brief Starts the ECC Multiplication with Generator point.
*
* \param scalar Pointer to the buffer containing the
* scalar value.
* \param curve Pointer to the structure containing the curve
* info.
* \param result_vector Pointer to the result vector location
* which will be set by this function.
* \param process Process to be polled upon completion of the
* operation, or \c NULL
*
* This function starts the ecc point multiplication operation of the
* scalar value with the well known generator point of the given curve.
*
* \retval PKA_STATUS_SUCCESS if successful in starting the operation.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy doing
* some other operation.
*/
uint8_t ecc_mul_gen_pt_start(uint32_t *scalar,
ecc_curve_info_t *curve,
uint32_t *result_vector,
struct process *process);
/** \brief Gets the result of ECC Multiplication with Generator point.
*
* \param ec_point Pointer to the structure where the resultant EC
* point will be stored. The callee is responsible to allocate the
* space for the ec point structure and the x and y co-ordinate as well.
* \param result_vector Address of the result location which
* was provided by the start function \sa PKAECCMultGenPtStart().
*
* This function gets the result of ecc point multiplication operation on the
* scalar point and the known generator point on the curve, previously started
* using the function \sa PKAECCMultGenPtStart().
*
* \retval PKA_STATUS_SUCCESS if the operation is successful.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy performing
* the operation.
* \retval PKA_STATUS_RESULT_0 if the result is all zeroes.
* \retval PKA_STATUS_FAILURE if the operation is not successful.
*/
uint8_t ecc_mul_gen_pt_get_result(ec_point_t *ec_point,
uint32_t result_vector);
/** \brief Starts the ECC Addition.
*
* \param ec_point1 Pointer to the structure containing the first
* ecc point.
* \param ec_point2 Pointer to the structure containing the
* second ecc point.
* \param curve Pointer to the structure containing the curve
* info.
* \param result_vector Pointer to the result vector location
* which will be set by this function.
* \param process Process to be polled upon completion of the
* operation, or \c NULL
*
* This function starts the ecc point addition operation on the
* two given ec points and generates the resultant ecc point.
*
* \retval PKA_STATUS_SUCCESS if successful in starting the operation.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy doing
* some other operation.
*/
uint8_t ecc_add_start(ec_point_t *ec_point1, ec_point_t *ec_point2,
ecc_curve_info_t *curve,
uint32_t *result_vector,
struct process *process);
/** \brief Gets the result of the ECC Addition
*
* \param ptOutEcPt Pointer to the structure where the resultant
* point will be stored. The callee is responsible to allocate memory,
* for the ec point structure including the memory for x and y
* co-ordinate values.
* \param ui32ResultLoc Address of the result location which
* was provided by the function \sa PKAECCAddStart().
*
* This function gets the result of ecc point addition operation on the
* on the two given ec points, previously started using the function \sa
* PKAECCAddStart().
*
* \retval PKA_STATUS_SUCCESS if the operation is successful.
* \retval PKA_STATUS_OPERATION_INPRG if the PKA hw module is busy performing
* the operation.
* \retval PKA_STATUS_RESULT_0 if the result is all zeroes.
* \retval PKA_STATUS_FAILURE if the operation is not successful.
*/
uint8_t ecc_add_get_result(ec_point_t *ptOutEcPt, uint32_t ui32ResultLoc);
/** @} */
#endif /* ECC_DRIVER_H_ */
/**
* @}
* @}
*/