nes-proj/platform/wismote/dev/sky-sensors.c

93 lines
3.3 KiB
C

/*
* Copyright (c) 2010, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
* $Id: sky-sensors.c,v 1.2 2010/02/06 18:28:26 joxe Exp $
*
* -----------------------------------------------------------------
*
* Author : Joakim Eriksson
* Created : 2010-02-02
* Updated : $Date: 2010/02/06 18:28:26 $
* $Revision: 1.2 $
*/
#include "contiki.h"
static uint8_t adc_on;
/*---------------------------------------------------------------------------*/
void
sky_sensors_activate(uint8_t type)
{
uint8_t pre = adc_on;
adc_on |= type;
P6SEL |= type;
if(pre == 0 && adc_on > 0) {
P6DIR = 0xff;
P6OUT = 0x00;
/* if nothing was started before, start up the ADC system */
/* Set up the ADC. */
/* ADC12CTL0 = REF2_5V + SHT0_6 + SHT1_6 + MSC; /\* Setup ADC12, ref., sampling time *\/ */
/* ADC12CTL1 = SHP + CONSEQ_3 + CSTARTADD_0; /\* Use sampling timer, repeat-sequenc-of-channels */
/* /\* convert up to MEM4 *\/ */
/* ADC12MCTL9 |= EOS; */
/* ADC12CTL0 |= ADC12ON + REFON; */
/* ADC12CTL0 |= ENC; /\* enable conversion *\/ */
/* ADC12CTL0 |= ADC12SC; /\* sample & convert *\/ */
}
}
/*---------------------------------------------------------------------------*/
void
sky_sensors_deactivate(uint8_t type)
{
adc_on &= ~type;
if(adc_on == 0) {
/* stop converting immediately, turn off reference voltage, etc. */
/* wait for conversion to stop */
/* ADC12CTL0 &= ~ENC; */
/* /\* need to remove CONSEQ_3 if not EOS is configured *\/ */
/* ADC12CTL1 &= ~CONSEQ_3; */
/* while(ADC12CTL1 & ADC12BUSY); */
/* ADC12CTL0 = 0; */
/* ADC12CTL1 = 0; */
/* P6DIR = 0x00; */
/* P6OUT = 0x00; */
/* P6SEL = 0x00; */
}
}
/*---------------------------------------------------------------------------*/