897 lines
22 KiB
C
897 lines
22 KiB
C
/*
|
|
* Copyright (c) 2011, Swedish Institute of Computer Science
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Institute nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki operating system.
|
|
*/
|
|
/*
|
|
* This code is almost device independent and should be easy to port.
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
|
|
#include "dev/spi.h"
|
|
#include "dev/cc2520/cc2520.h"
|
|
#include "dev/cc2520/cc2520_const.h"
|
|
|
|
#include "net/packetbuf.h"
|
|
#include "net/rime/rimestats.h"
|
|
#include "net/netstack.h"
|
|
|
|
#include <string.h>
|
|
|
|
#ifndef CC2520_CONF_AUTOACK
|
|
#define CC2520_CONF_AUTOACK 0
|
|
#endif /* CC2520_CONF_AUTOACK */
|
|
|
|
#define WITH_SEND_CCA 1
|
|
|
|
#define FOOTER_LEN 2
|
|
|
|
#define FOOTER1_CRC_OK 0x80
|
|
#define FOOTER1_CORRELATION 0x7f
|
|
|
|
#include <stdio.h>
|
|
#define DEBUG 0
|
|
#if DEBUG
|
|
#define PRINTF(...) printf(__VA_ARGS__)
|
|
#else
|
|
#define PRINTF(...) do {} while (0)
|
|
#endif
|
|
|
|
#if 0 && DEBUG
|
|
#include "dev/leds.h"
|
|
#define LEDS_ON(x) leds_on(x)
|
|
#define LEDS_OFF(x) leds_off(x)
|
|
#else
|
|
#define LEDS_ON(x)
|
|
#define LEDS_OFF(x)
|
|
#endif
|
|
|
|
void cc2520_arch_init(void);
|
|
|
|
/* XXX hack: these will be made as Chameleon packet attributes */
|
|
rtimer_clock_t cc2520_time_of_arrival, cc2520_time_of_departure;
|
|
|
|
int cc2520_authority_level_of_sender;
|
|
|
|
int cc2520_packets_seen, cc2520_packets_read;
|
|
|
|
#define BUSYWAIT_UNTIL(cond, max_time) \
|
|
do { \
|
|
rtimer_clock_t t0; \
|
|
t0 = RTIMER_NOW(); \
|
|
while(!(cond) && RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + (max_time))); \
|
|
} while(0)
|
|
|
|
volatile uint8_t cc2520_sfd_counter;
|
|
volatile uint16_t cc2520_sfd_start_time;
|
|
volatile uint16_t cc2520_sfd_end_time;
|
|
|
|
static volatile uint16_t last_packet_timestamp;
|
|
/*---------------------------------------------------------------------------*/
|
|
PROCESS(cc2520_process, "CC2520 driver");
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
|
|
int cc2520_on(void);
|
|
int cc2520_off(void);
|
|
|
|
static int cc2520_read(void *buf, unsigned short bufsize);
|
|
|
|
static int cc2520_prepare(const void *data, unsigned short len);
|
|
static int cc2520_transmit(unsigned short len);
|
|
static int cc2520_send(const void *data, unsigned short len);
|
|
|
|
static int cc2520_receiving_packet(void);
|
|
static int pending_packet(void);
|
|
static int cc2520_cca(void);
|
|
/* static int detected_energy(void); */
|
|
|
|
signed char cc2520_last_rssi;
|
|
uint8_t cc2520_last_correlation;
|
|
|
|
static uint8_t receive_on;
|
|
static int channel;
|
|
|
|
static radio_result_t
|
|
get_value(radio_param_t param, radio_value_t *value)
|
|
{
|
|
if(!value) {
|
|
return RADIO_RESULT_INVALID_VALUE;
|
|
}
|
|
switch(param) {
|
|
case RADIO_PARAM_POWER_MODE:
|
|
*value = receive_on ? RADIO_POWER_MODE_ON : RADIO_POWER_MODE_OFF;
|
|
return RADIO_RESULT_OK;
|
|
case RADIO_PARAM_CHANNEL:
|
|
*value = cc2520_get_channel();
|
|
return RADIO_RESULT_OK;
|
|
case RADIO_CONST_CHANNEL_MIN:
|
|
*value = 11;
|
|
return RADIO_RESULT_OK;
|
|
case RADIO_CONST_CHANNEL_MAX:
|
|
*value = 26;
|
|
return RADIO_RESULT_OK;
|
|
default:
|
|
return RADIO_RESULT_NOT_SUPPORTED;
|
|
}
|
|
}
|
|
|
|
static radio_result_t
|
|
set_value(radio_param_t param, radio_value_t value)
|
|
{
|
|
switch(param) {
|
|
case RADIO_PARAM_POWER_MODE:
|
|
if(value == RADIO_POWER_MODE_ON) {
|
|
cc2520_on();
|
|
return RADIO_RESULT_OK;
|
|
}
|
|
if(value == RADIO_POWER_MODE_OFF) {
|
|
cc2520_off();
|
|
return RADIO_RESULT_OK;
|
|
}
|
|
return RADIO_RESULT_INVALID_VALUE;
|
|
case RADIO_PARAM_CHANNEL:
|
|
if(value < 11 || value > 26) {
|
|
return RADIO_RESULT_INVALID_VALUE;
|
|
}
|
|
cc2520_set_channel(value);
|
|
return RADIO_RESULT_OK;
|
|
default:
|
|
return RADIO_RESULT_NOT_SUPPORTED;
|
|
}
|
|
}
|
|
|
|
static radio_result_t
|
|
get_object(radio_param_t param, void *dest, size_t size)
|
|
{
|
|
return RADIO_RESULT_NOT_SUPPORTED;
|
|
}
|
|
|
|
static radio_result_t
|
|
set_object(radio_param_t param, const void *src, size_t size)
|
|
{
|
|
return RADIO_RESULT_NOT_SUPPORTED;
|
|
}
|
|
|
|
const struct radio_driver cc2520_driver =
|
|
{
|
|
cc2520_init,
|
|
cc2520_prepare,
|
|
cc2520_transmit,
|
|
cc2520_send,
|
|
cc2520_read,
|
|
/* cc2520_set_channel, */
|
|
/* detected_energy, */
|
|
cc2520_cca,
|
|
cc2520_receiving_packet,
|
|
pending_packet,
|
|
cc2520_on,
|
|
cc2520_off,
|
|
get_value,
|
|
set_value,
|
|
get_object,
|
|
set_object
|
|
};
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
static void
|
|
getrxdata(void *buf, int len)
|
|
{
|
|
CC2520_READ_FIFO_BUF(buf, len);
|
|
}
|
|
static void
|
|
getrxbyte(uint8_t *byte)
|
|
{
|
|
CC2520_READ_FIFO_BYTE(*byte);
|
|
}
|
|
static void
|
|
flushrx(void)
|
|
{
|
|
uint8_t dummy;
|
|
|
|
CC2520_READ_FIFO_BYTE(dummy);
|
|
CC2520_STROBE(CC2520_INS_SFLUSHRX);
|
|
CC2520_STROBE(CC2520_INS_SFLUSHRX);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
strobe(uint8_t regname)
|
|
{
|
|
CC2520_STROBE(regname);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static unsigned int
|
|
status(void)
|
|
{
|
|
uint8_t status;
|
|
CC2520_GET_STATUS(status);
|
|
return status;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static uint8_t locked, lock_on, lock_off;
|
|
|
|
static void
|
|
on(void)
|
|
{
|
|
CC2520_ENABLE_FIFOP_INT();
|
|
strobe(CC2520_INS_SRXON);
|
|
|
|
BUSYWAIT_UNTIL(status() & (BV(CC2520_XOSC16M_STABLE)), RTIMER_SECOND / 100);
|
|
|
|
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
|
receive_on = 1;
|
|
}
|
|
static void
|
|
off(void)
|
|
{
|
|
/* PRINTF("off\n");*/
|
|
receive_on = 0;
|
|
|
|
/* Wait for transmission to end before turning radio off. */
|
|
BUSYWAIT_UNTIL(!(status() & BV(CC2520_TX_ACTIVE)), RTIMER_SECOND / 10);
|
|
|
|
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
|
strobe(CC2520_INS_SRFOFF);
|
|
CC2520_DISABLE_FIFOP_INT();
|
|
|
|
if(!CC2520_FIFOP_IS_1) {
|
|
flushrx();
|
|
}
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
#define GET_LOCK() locked++
|
|
static void RELEASE_LOCK(void) {
|
|
if(locked == 1) {
|
|
if(lock_on) {
|
|
on();
|
|
lock_on = 0;
|
|
}
|
|
if(lock_off) {
|
|
off();
|
|
lock_off = 0;
|
|
}
|
|
}
|
|
locked--;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static uint8_t
|
|
getreg(uint16_t regname)
|
|
{
|
|
uint8_t reg;
|
|
CC2520_READ_REG(regname, reg);
|
|
return reg;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
setreg(uint16_t regname, uint8_t value)
|
|
{
|
|
CC2520_WRITE_REG(regname, value);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static void
|
|
set_txpower(uint8_t power)
|
|
{
|
|
setreg(CC2520_TXPOWER, power);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
#define AUTOCRC (1 << 6)
|
|
#define AUTOACK (1 << 5)
|
|
#define FRAME_MAX_VERSION ((1 << 3) | (1 << 2))
|
|
#define FRAME_FILTER_ENABLE (1 << 0)
|
|
#define CORR_THR(n) (((n) & 0x1f) << 6)
|
|
#define FIFOP_THR(n) ((n) & 0x7f)
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_init(void)
|
|
{
|
|
{
|
|
int s = splhigh();
|
|
cc2520_arch_init(); /* Initalize ports and SPI. */
|
|
CC2520_DISABLE_FIFOP_INT();
|
|
CC2520_FIFOP_INT_INIT();
|
|
splx(s);
|
|
}
|
|
|
|
SET_VREG_INACTIVE();
|
|
clock_delay(250);
|
|
/* Turn on voltage regulator and reset. */
|
|
SET_VREG_ACTIVE();
|
|
clock_delay(250);
|
|
SET_RESET_ACTIVE();
|
|
clock_delay(127);
|
|
SET_RESET_INACTIVE();
|
|
clock_delay(125);
|
|
/* Turn on the crystal oscillator. */
|
|
strobe(CC2520_INS_SXOSCON);
|
|
clock_delay(125);
|
|
|
|
BUSYWAIT_UNTIL(status() & (BV(CC2520_XOSC16M_STABLE)), RTIMER_SECOND / 100);
|
|
|
|
/* Change default values as recommended in the data sheet, */
|
|
/* correlation threshold = 20, RX bandpass filter = 1.3uA.*/
|
|
|
|
setreg(CC2520_TXCTRL, 0x94);
|
|
setreg(CC2520_TXPOWER, 0x13); // Output power 1 dBm
|
|
|
|
/*
|
|
|
|
valeurs de TXPOWER
|
|
0x03 -> -18 dBm
|
|
0x2C -> -7 dBm
|
|
0x88 -> -4 dBm
|
|
0x81 -> -2 dBm
|
|
0x32 -> 0 dBm
|
|
0x13 -> 1 dBm
|
|
0x32 -> 0 dBm
|
|
0x13 -> 1 dBm
|
|
0xAB -> 2 dBm
|
|
0xF2 -> 3 dBm
|
|
0xF7 -> 5 dBm
|
|
*/
|
|
setreg(CC2520_CCACTRL0, 0xF8); // CCA treshold -80dBm
|
|
|
|
// Recommended RX settings
|
|
setreg(CC2520_MDMCTRL0, 0x84); // Controls modem
|
|
setreg(CC2520_MDMCTRL1, 0x14); // Controls modem
|
|
setreg(CC2520_RXCTRL, 0x3F); // Adjust currents in RX related analog modules
|
|
setreg(CC2520_FSCTRL, 0x5A); // Adjust currents in synthesizer.
|
|
setreg(CC2520_FSCAL1, 0x2B); // Adjust currents in VCO
|
|
setreg(CC2520_AGCCTRL1, 0x11); // Adjust target value for AGC control loop
|
|
setreg(CC2520_AGCCTRL2, 0xEB);
|
|
|
|
// Disable external clock
|
|
setreg(CC2520_EXTCLOCK, 0x00);
|
|
|
|
// Tune ADC performance
|
|
setreg(CC2520_ADCTEST0, 0x10);
|
|
setreg(CC2520_ADCTEST1, 0x0E);
|
|
setreg(CC2520_ADCTEST2, 0x03);
|
|
|
|
/* Set auto CRC on frame. */
|
|
#if CC2520_CONF_AUTOACK
|
|
setreg(CC2520_FRMCTRL0, AUTOCRC | AUTOACK);
|
|
setreg(CC2520_FRMFILT0, FRAME_MAX_VERSION|FRAME_FILTER_ENABLE);
|
|
#else
|
|
/* setreg(CC2520_FRMCTRL0, 0x60); */
|
|
setreg(CC2520_FRMCTRL0, AUTOCRC);
|
|
/* Disable filter on @ (remove if you want to address specific wismote) */
|
|
setreg(CC2520_FRMFILT0, 0x00);
|
|
#endif /* CC2520_CONF_AUTOACK */
|
|
/* SET_RXENMASK_ON_TX */
|
|
setreg(CC2520_FRMCTRL1, 1);
|
|
/* Set FIFOP threshold to maximum .*/
|
|
setreg(CC2520_FIFOPCTRL, FIFOP_THR(0x7F));
|
|
|
|
cc2520_set_pan_addr(0xffff, 0x0000, NULL);
|
|
cc2520_set_channel(26);
|
|
|
|
flushrx();
|
|
|
|
process_start(&cc2520_process, NULL);
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
cc2520_transmit(unsigned short payload_len)
|
|
{
|
|
int i, txpower;
|
|
|
|
GET_LOCK();
|
|
|
|
txpower = 0;
|
|
if(packetbuf_attr(PACKETBUF_ATTR_RADIO_TXPOWER) > 0) {
|
|
/* Remember the current transmission power */
|
|
txpower = cc2520_get_txpower();
|
|
/* Set the specified transmission power */
|
|
set_txpower(packetbuf_attr(PACKETBUF_ATTR_RADIO_TXPOWER) - 1);
|
|
}
|
|
|
|
/* The TX FIFO can only hold one packet. Make sure to not overrun
|
|
* FIFO by waiting for transmission to start here and synchronizing
|
|
* with the CC2520_TX_ACTIVE check in cc2520_send.
|
|
*
|
|
* Note that we may have to wait up to 320 us (20 symbols) before
|
|
* transmission starts.
|
|
*/
|
|
#ifndef CC2520_CONF_SYMBOL_LOOP_COUNT
|
|
#error CC2520_CONF_SYMBOL_LOOP_COUNT needs to be set!!!
|
|
#else
|
|
#define LOOP_20_SYMBOLS CC2520_CONF_SYMBOL_LOOP_COUNT
|
|
#endif
|
|
|
|
#if WITH_SEND_CCA
|
|
strobe(CC2520_INS_SRXON);
|
|
BUSYWAIT_UNTIL(status() & BV(CC2520_RSSI_VALID) , RTIMER_SECOND / 10);
|
|
strobe(CC2520_INS_STXONCCA);
|
|
#else /* WITH_SEND_CCA */
|
|
strobe(CC2520_INS_STXON);
|
|
#endif /* WITH_SEND_CCA */
|
|
for(i = LOOP_20_SYMBOLS; i > 0; i--) {
|
|
if(CC2520_SFD_IS_1) {
|
|
{
|
|
rtimer_clock_t sfd_timestamp;
|
|
sfd_timestamp = cc2520_sfd_start_time;
|
|
if(packetbuf_attr(PACKETBUF_ATTR_PACKET_TYPE) ==
|
|
PACKETBUF_ATTR_PACKET_TYPE_TIMESTAMP) {
|
|
/* Write timestamp to last two bytes of packet in TXFIFO. */
|
|
CC2520_WRITE_RAM(&sfd_timestamp, CC2520RAM_TXFIFO + payload_len - 1, 2);
|
|
}
|
|
}
|
|
|
|
if(!(status() & BV(CC2520_TX_ACTIVE))) {
|
|
/* SFD went high but we are not transmitting. This means that
|
|
we just started receiving a packet, so we drop the
|
|
transmission. */
|
|
RELEASE_LOCK();
|
|
return RADIO_TX_COLLISION;
|
|
}
|
|
if(receive_on) {
|
|
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
|
|
}
|
|
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
|
|
/* We wait until transmission has ended so that we get an
|
|
accurate measurement of the transmission time.*/
|
|
//BUSYWAIT_UNTIL(getreg(CC2520_EXCFLAG0) & TX_FRM_DONE , RTIMER_SECOND / 100);
|
|
BUSYWAIT_UNTIL(!(status() & BV(CC2520_TX_ACTIVE)), RTIMER_SECOND / 10);
|
|
|
|
#ifdef ENERGEST_CONF_LEVELDEVICE_LEVELS
|
|
ENERGEST_OFF_LEVEL(ENERGEST_TYPE_TRANSMIT,cc2520_get_txpower());
|
|
#endif
|
|
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
|
|
if(receive_on) {
|
|
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
|
|
} else {
|
|
/* We need to explicitly turn off the radio,
|
|
* since STXON[CCA] -> TX_ACTIVE -> RX_ACTIVE */
|
|
off();
|
|
}
|
|
|
|
if(packetbuf_attr(PACKETBUF_ATTR_RADIO_TXPOWER) > 0) {
|
|
/* Restore the transmission power */
|
|
set_txpower(txpower & 0xff);
|
|
}
|
|
|
|
RELEASE_LOCK();
|
|
|
|
return RADIO_TX_OK;
|
|
}
|
|
}
|
|
|
|
/* If we are using WITH_SEND_CCA, we get here if the packet wasn't
|
|
transmitted because of other channel activity. */
|
|
RIMESTATS_ADD(contentiondrop);
|
|
PRINTF("cc2520: do_send() transmission never started\n");
|
|
|
|
if(packetbuf_attr(PACKETBUF_ATTR_RADIO_TXPOWER) > 0) {
|
|
/* Restore the transmission power */
|
|
set_txpower(txpower & 0xff);
|
|
}
|
|
|
|
RELEASE_LOCK();
|
|
return RADIO_TX_COLLISION;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
cc2520_prepare(const void *payload, unsigned short payload_len)
|
|
{
|
|
uint8_t total_len;
|
|
GET_LOCK();
|
|
|
|
PRINTF("cc2520: sending %d bytes\n", payload_len);
|
|
/*int i;
|
|
for(i = 0; i < payload_len;i++)
|
|
printf("%x",((uint8_t *) payload)[i]);
|
|
printf("\n");*/
|
|
RIMESTATS_ADD(lltx);
|
|
|
|
/* Wait for any previous transmission to finish. */
|
|
/* while(status() & BV(CC2520_TX_ACTIVE));*/
|
|
|
|
/* Write packet to TX FIFO. */
|
|
strobe(CC2520_INS_SFLUSHTX);
|
|
|
|
total_len = payload_len + FOOTER_LEN;
|
|
CC2520_WRITE_FIFO_BUF(&total_len, 1);
|
|
CC2520_WRITE_FIFO_BUF(payload, payload_len);
|
|
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
cc2520_send(const void *payload, unsigned short payload_len)
|
|
{
|
|
cc2520_prepare(payload, payload_len);
|
|
return cc2520_transmit(payload_len);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_off(void)
|
|
{
|
|
/* Don't do anything if we are already turned off. */
|
|
if(receive_on == 0) {
|
|
return 1;
|
|
}
|
|
|
|
/* If we are called when the driver is locked, we indicate that the
|
|
radio should be turned off when the lock is unlocked. */
|
|
if(locked) {
|
|
/* printf("Off when locked (%d)\n", locked);*/
|
|
lock_off = 1;
|
|
return 1;
|
|
}
|
|
|
|
GET_LOCK();
|
|
/* If we are currently receiving a packet (indicated by SFD == 1),
|
|
we don't actually switch the radio off now, but signal that the
|
|
driver should switch off the radio once the packet has been
|
|
received and processed, by setting the 'lock_off' variable. */
|
|
if(status() & BV(CC2520_TX_ACTIVE)) {
|
|
lock_off = 1;
|
|
} else {
|
|
off();
|
|
}
|
|
RELEASE_LOCK();
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_on(void)
|
|
{
|
|
if(receive_on) {
|
|
return 1;
|
|
}
|
|
if(locked) {
|
|
lock_on = 1;
|
|
return 1;
|
|
}
|
|
|
|
GET_LOCK();
|
|
on();
|
|
RELEASE_LOCK();
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_get_channel(void)
|
|
{
|
|
return channel;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_set_channel(int c)
|
|
{
|
|
uint16_t f;
|
|
|
|
GET_LOCK();
|
|
/*
|
|
* Subtract the base channel (11), multiply by 5, which is the
|
|
* channel spacing. 357 is 2405-2048 and 0x4000 is LOCK_THR = 1.
|
|
*/
|
|
channel = c;
|
|
|
|
f = MIN_CHANNEL + ((channel - MIN_CHANNEL) * CHANNEL_SPACING);
|
|
/*
|
|
* Writing RAM requires crystal oscillator to be stable.
|
|
*/
|
|
BUSYWAIT_UNTIL((status() & (BV(CC2520_XOSC16M_STABLE))), RTIMER_SECOND / 10);
|
|
|
|
/* Wait for any transmission to end. */
|
|
BUSYWAIT_UNTIL(!(status() & BV(CC2520_TX_ACTIVE)), RTIMER_SECOND / 10);
|
|
|
|
/* Define radio channel (between 11 and 25) */
|
|
setreg(CC2520_FREQCTRL, f);
|
|
|
|
/* If we are in receive mode, we issue an SRXON command to ensure
|
|
that the VCO is calibrated. */
|
|
if(receive_on) {
|
|
strobe(CC2520_INS_SRXON);
|
|
}
|
|
|
|
RELEASE_LOCK();
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2520_set_pan_addr(unsigned pan,
|
|
unsigned addr,
|
|
const uint8_t *ieee_addr)
|
|
{
|
|
uint8_t tmp[2];
|
|
|
|
GET_LOCK();
|
|
|
|
/*
|
|
* Writing RAM requires crystal oscillator to be stable.
|
|
*/
|
|
BUSYWAIT_UNTIL(status() & (BV(CC2520_XOSC16M_STABLE)), RTIMER_SECOND / 10);
|
|
|
|
tmp[0] = pan & 0xff;
|
|
tmp[1] = pan >> 8;
|
|
CC2520_WRITE_RAM(&tmp, CC2520RAM_PANID, 2);
|
|
|
|
|
|
tmp[0] = addr & 0xff;
|
|
tmp[1] = addr >> 8;
|
|
CC2520_WRITE_RAM(&tmp, CC2520RAM_SHORTADDR, 2);
|
|
if(ieee_addr != NULL) {
|
|
int f;
|
|
uint8_t tmp_addr[8];
|
|
// LSB first, MSB last for 802.15.4 addresses in CC2520
|
|
for (f = 0; f < 8; f++) {
|
|
tmp_addr[7 - f] = ieee_addr[f];
|
|
}
|
|
CC2520_WRITE_RAM(tmp_addr, CC2520RAM_IEEEADDR, 8);
|
|
}
|
|
RELEASE_LOCK();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
* Interrupt leaves frame intact in FIFO.
|
|
*/
|
|
int
|
|
cc2520_interrupt(void)
|
|
{
|
|
CC2520_CLEAR_FIFOP_INT();
|
|
process_poll(&cc2520_process);
|
|
|
|
last_packet_timestamp = cc2520_sfd_start_time;
|
|
cc2520_packets_seen++;
|
|
return 1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
PROCESS_THREAD(cc2520_process, ev, data)
|
|
{
|
|
int len;
|
|
PROCESS_BEGIN();
|
|
|
|
PRINTF("cc2520_process: started\n");
|
|
|
|
while(1) {
|
|
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
|
|
|
|
PRINTF("cc2520_process: calling receiver callback\n");
|
|
|
|
packetbuf_clear();
|
|
packetbuf_set_attr(PACKETBUF_ATTR_TIMESTAMP, last_packet_timestamp);
|
|
len = cc2520_read(packetbuf_dataptr(), PACKETBUF_SIZE);
|
|
packetbuf_set_datalen(len);
|
|
|
|
NETSTACK_RDC.input();
|
|
/* flushrx(); */
|
|
}
|
|
|
|
PROCESS_END();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
cc2520_read(void *buf, unsigned short bufsize)
|
|
{
|
|
uint8_t footer[2];
|
|
uint8_t len;
|
|
|
|
if(!CC2520_FIFOP_IS_1) {
|
|
return 0;
|
|
}
|
|
|
|
GET_LOCK();
|
|
|
|
cc2520_packets_read++;
|
|
|
|
getrxbyte(&len);
|
|
|
|
if(len > CC2520_MAX_PACKET_LEN) {
|
|
/* Oops, we must be out of sync. */
|
|
flushrx();
|
|
RIMESTATS_ADD(badsynch);
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
|
|
if(len <= FOOTER_LEN) {
|
|
flushrx();
|
|
RIMESTATS_ADD(tooshort);
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
|
|
if(len - FOOTER_LEN > bufsize) {
|
|
flushrx();
|
|
RIMESTATS_ADD(toolong);
|
|
RELEASE_LOCK();
|
|
return 0;
|
|
}
|
|
|
|
getrxdata(buf, len - FOOTER_LEN);
|
|
getrxdata(footer, FOOTER_LEN);
|
|
|
|
if(footer[1] & FOOTER1_CRC_OK) {
|
|
cc2520_last_rssi = footer[0];
|
|
cc2520_last_correlation = footer[1] & FOOTER1_CORRELATION;
|
|
|
|
|
|
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, cc2520_last_rssi);
|
|
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, cc2520_last_correlation);
|
|
|
|
RIMESTATS_ADD(llrx);
|
|
|
|
} else {
|
|
RIMESTATS_ADD(badcrc);
|
|
len = FOOTER_LEN;
|
|
}
|
|
|
|
if(CC2520_FIFOP_IS_1) {
|
|
if(!CC2520_FIFO_IS_1) {
|
|
/* Clean up in case of FIFO overflow! This happens for every
|
|
* full length frame and is signaled by FIFOP = 1 and FIFO =
|
|
* 0. */
|
|
flushrx();
|
|
} else {
|
|
/* Another packet has been received and needs attention. */
|
|
process_poll(&cc2520_process);
|
|
}
|
|
}
|
|
|
|
RELEASE_LOCK();
|
|
|
|
if(len < FOOTER_LEN) {
|
|
return 0;
|
|
}
|
|
|
|
return len - FOOTER_LEN;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2520_set_txpower(uint8_t power)
|
|
{
|
|
GET_LOCK();
|
|
set_txpower(power);
|
|
RELEASE_LOCK();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_get_txpower(void)
|
|
{
|
|
uint8_t power;
|
|
GET_LOCK();
|
|
power = getreg(CC2520_TXPOWER);
|
|
RELEASE_LOCK();
|
|
return power;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_rssi(void)
|
|
{
|
|
int rssi;
|
|
int radio_was_off = 0;
|
|
|
|
if(locked) {
|
|
return 0;
|
|
}
|
|
|
|
GET_LOCK();
|
|
|
|
if(!receive_on) {
|
|
radio_was_off = 1;
|
|
cc2520_on();
|
|
}
|
|
BUSYWAIT_UNTIL(status() & BV(CC2520_RSSI_VALID), RTIMER_SECOND / 100);
|
|
|
|
rssi = (int)((signed char)getreg(CC2520_RSSI));
|
|
|
|
if(radio_was_off) {
|
|
cc2520_off();
|
|
}
|
|
RELEASE_LOCK();
|
|
return rssi;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
static int
|
|
detected_energy(void)
|
|
{
|
|
return cc2520_rssi();
|
|
}
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_cca_valid(void)
|
|
{
|
|
int valid;
|
|
if(locked) {
|
|
return 1;
|
|
}
|
|
GET_LOCK();
|
|
valid = !!(status() & BV(CC2520_RSSI_VALID));
|
|
RELEASE_LOCK();
|
|
return valid;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
cc2520_cca(void)
|
|
{
|
|
int cca;
|
|
int radio_was_off = 0;
|
|
|
|
/* If the radio is locked by an underlying thread (because we are
|
|
being invoked through an interrupt), we preted that the coast is
|
|
clear (i.e., no packet is currently being transmitted by a
|
|
neighbor). */
|
|
if(locked) {
|
|
return 1;
|
|
}
|
|
|
|
GET_LOCK();
|
|
if(!receive_on) {
|
|
radio_was_off = 1;
|
|
cc2520_on();
|
|
}
|
|
|
|
/* Make sure that the radio really got turned on. */
|
|
if(!receive_on) {
|
|
RELEASE_LOCK();
|
|
if(radio_was_off) {
|
|
cc2520_off();
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
BUSYWAIT_UNTIL(status() & BV(CC2520_RSSI_VALID), RTIMER_SECOND / 100);
|
|
|
|
cca = CC2520_CCA_IS_1;
|
|
|
|
if(radio_was_off) {
|
|
cc2520_off();
|
|
}
|
|
RELEASE_LOCK();
|
|
return cca;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
int
|
|
cc2520_receiving_packet(void)
|
|
{
|
|
return CC2520_SFD_IS_1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
static int
|
|
pending_packet(void)
|
|
{
|
|
return CC2520_FIFOP_IS_1;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
cc2520_set_cca_threshold(int value)
|
|
{
|
|
GET_LOCK();
|
|
setreg(CC2520_CCACTRL0, value & 0xff);
|
|
RELEASE_LOCK();
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|