597 lines
16 KiB
C
597 lines
16 KiB
C
/**
|
|
* \addtogroup mbxxx-platform
|
|
*
|
|
* @{
|
|
*/
|
|
/*
|
|
* Copyright (c) 2010, STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote
|
|
* products derived from this software without specific prior
|
|
* written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* This file is part of the Contiki OS
|
|
*
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \file
|
|
* Software layer to support all the ST kits boards
|
|
*
|
|
* \brief
|
|
* Board file x STM32W108 Kits boards
|
|
*
|
|
* This file implements a software layer to support all the ST kits boards
|
|
* and deal with the difference in leds, buttons and sensors connected
|
|
* to the board. This a bit too complex for customer boards adaptation
|
|
* and customer can simplify it to adapt it to their hardware environment
|
|
* as they normally don't need to have the software running on several boards.
|
|
* The boards supported are:
|
|
* - MB851 A
|
|
* - MB851 B
|
|
* - MB851 C
|
|
* - MB851 D
|
|
* - MB954 A
|
|
* - MB954 B
|
|
* - MB954 C
|
|
* - MB950 A
|
|
* - MB951 A
|
|
* - IDZ401V1
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
#include PLATFORM_HEADER
|
|
#include BOARD_HEADER
|
|
#ifdef EMBERZNET_HAL
|
|
#include "stack/include/ember.h"
|
|
#include "stack/include/error.h"
|
|
#include "hal/hal.h"
|
|
#define PORTA (0 << 3)
|
|
#define PORTB (1 << 3)
|
|
#define PORTC (2 << 3)
|
|
#else
|
|
#include "error.h"
|
|
#include "hal/hal.h"
|
|
#include "hal/micro/cortexm3/mfg-token.h"
|
|
#endif
|
|
#include <string.h>
|
|
|
|
const LedResourceType LedsMB851A[] = {
|
|
{
|
|
"D1", /* Green LED */
|
|
PORTB,
|
|
6
|
|
},
|
|
{
|
|
"D3", /* Yellow LED */
|
|
PORTB,
|
|
5
|
|
}
|
|
};
|
|
|
|
const InfraRedLedResourceType infraRedLedMB851A = {
|
|
"D5", /* Infrared LED */
|
|
PORTB,
|
|
4
|
|
};
|
|
|
|
const LedResourceType LedsMB954A[] = {
|
|
{
|
|
"D1", /* Green LED */
|
|
PORTA,
|
|
5
|
|
},
|
|
{
|
|
"D3", /* Yellow LED */
|
|
PORTA,
|
|
0
|
|
}
|
|
};
|
|
|
|
const LedResourceType LedsIDZ401V1[] = {
|
|
{
|
|
"D2", /* Yellow LED */
|
|
PORTA,
|
|
7
|
|
}
|
|
};
|
|
|
|
|
|
const ButtonResourceType ButtonsMB851A[] = {
|
|
{
|
|
"S1",
|
|
PORTA,
|
|
7
|
|
}
|
|
};
|
|
|
|
const ButtonResourceType ButtonsMB954A[] = {
|
|
{
|
|
"S1",
|
|
PORTB,
|
|
3
|
|
}
|
|
};
|
|
|
|
const ButtonResourceType ButtonsMB950A[] = {
|
|
{
|
|
"S1",
|
|
PORTB,
|
|
3
|
|
},
|
|
{
|
|
"S2",
|
|
PORTA,
|
|
7
|
|
},
|
|
{
|
|
"S3",
|
|
PORTB,
|
|
7
|
|
},
|
|
{
|
|
"S4",
|
|
PORTB,
|
|
0
|
|
},
|
|
{
|
|
"S5",
|
|
PORTB,
|
|
6
|
|
}
|
|
};
|
|
|
|
const ButtonResourceType ButtonsMB951A[] = {
|
|
{
|
|
"S1",
|
|
PORTA,
|
|
3
|
|
},
|
|
};
|
|
|
|
const ButtonResourceType ButtonsIDZ401V1[] = {
|
|
|
|
};
|
|
|
|
|
|
const TempSensorResourceType stlm20PB7noDiv = {
|
|
"STLM20",
|
|
PORTB,
|
|
7,
|
|
1,
|
|
FALSE
|
|
};
|
|
|
|
const TempSensorResourceType stlm20PA4noDiv = {
|
|
"STLM20",
|
|
PORTA,
|
|
4,
|
|
1,
|
|
FALSE
|
|
};
|
|
|
|
const TempSensorResourceType stlm20PA4withDiv = {
|
|
"STLM20",
|
|
PORTA,
|
|
4,
|
|
2,
|
|
TRUE
|
|
};
|
|
|
|
const MemsResourceType memsSensor = {
|
|
"LIS302",
|
|
0
|
|
};
|
|
|
|
const BoardIOType ioMB851A = {
|
|
LedsMB851A,
|
|
ButtonsMB851A,
|
|
};
|
|
|
|
const BoardIOType ioMB954A = {
|
|
LedsMB954A,
|
|
ButtonsMB954A,
|
|
};
|
|
|
|
const BoardIOType ioMB950A = {
|
|
LedsMB954A,
|
|
ButtonsMB950A,
|
|
};
|
|
|
|
const BoardIOType ioMB951A = {
|
|
LedsMB954A,
|
|
ButtonsMB951A,
|
|
};
|
|
|
|
const BoardIOType ioIDZ401V1 = {
|
|
LedsIDZ401V1,
|
|
ButtonsIDZ401V1,
|
|
};
|
|
|
|
const BoardResourcesType MB851A = {
|
|
"MB851 A",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_FTDI),
|
|
BUTTONS_MB851A,
|
|
LEDS_MB851A,
|
|
&ioMB851A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PB7noDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB851B = {
|
|
"MB851 B",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_FTDI),
|
|
BUTTONS_MB851B,
|
|
LEDS_MB851B,
|
|
&ioMB851A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PB7noDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB851C = {
|
|
"MB851 C",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_STM32F | BOARD_HAS_EEPROM),
|
|
BUTTONS_MB851C,
|
|
LEDS_MB851C,
|
|
&ioMB954A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PA4withDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB851D = {
|
|
"MB851 D",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_STM32F | BOARD_HAS_EEPROM),
|
|
BUTTONS_MB851D,
|
|
LEDS_MB851D,
|
|
&ioMB954A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PA4withDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB954A = {
|
|
"MB954 A",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_FTDI | BOARD_HAS_PA),
|
|
BUTTONS_MB954A,
|
|
LEDS_MB954A,
|
|
&ioMB954A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PA4noDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB954B = {
|
|
"MB954 B",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_STM32F | BOARD_HAS_EEPROM | BOARD_HAS_PA),
|
|
BUTTONS_MB954B,
|
|
LEDS_MB954B,
|
|
&ioMB954A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PA4withDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB954C = {
|
|
"MB954 C",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_STM32F | BOARD_HAS_EEPROM | BOARD_HAS_PA),
|
|
BUTTONS_MB954C,
|
|
LEDS_MB954C,
|
|
&ioMB954A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PA4noDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB950A = {
|
|
"MB950 A",
|
|
(BOARD_HAS_MEMS | BOARD_HAS_TEMP_SENSOR | BOARD_HAS_STM32F),
|
|
BUTTONS_MB950A,
|
|
LEDS_MB950A,
|
|
&ioMB950A,
|
|
&infraRedLedMB851A,
|
|
&memsSensor,
|
|
&stlm20PA4noDiv,
|
|
};
|
|
|
|
const BoardResourcesType MB951A = {
|
|
"MB951 A",
|
|
(BOARD_HAS_STM32F),
|
|
BUTTONS_MB951A,
|
|
LEDS_MB951A,
|
|
&ioMB951A,
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
};
|
|
|
|
const BoardResourcesType IDZ401V1 = {
|
|
"IDZ401V1",
|
|
(BOARD_HAS_STM32F),
|
|
BUTTONS_IDZ401V1,
|
|
LEDS_IDZ401V1,
|
|
&ioIDZ401V1,
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
};
|
|
|
|
static const BoardResourcesType *boardList [] = {
|
|
&MB851A,
|
|
&MB851B,
|
|
&MB851C,
|
|
&MB851D,
|
|
&MB954A,
|
|
&MB954B,
|
|
&MB954C,
|
|
&MB950A,
|
|
&MB951A,
|
|
&IDZ401V1
|
|
};
|
|
|
|
BoardResourcesType const *boardDescription = NULL;
|
|
|
|
#define PORT_NAME(x) ((x == PORTA) ? "A": ((x == PORTB) ? "B" : ((x == PORTC) ? "C": "?")))
|
|
|
|
void halBoardInit(void)
|
|
{
|
|
char boardName[16];
|
|
int8_t i;
|
|
boardDescription = NULL;
|
|
#ifdef EMBERZNET_HAL
|
|
halCommonGetToken(boardName, TOKEN_MFG_BOARD_NAME);
|
|
#else
|
|
halCommonGetMfgToken(boardName, TOKEN_MFG_BOARD_NAME);
|
|
#endif
|
|
|
|
i = 15;
|
|
while ((i >= 0) && (boardName[i] == 0xFF)) {
|
|
boardName[i] = 0;
|
|
i--;
|
|
}
|
|
|
|
for (i = 0; i < (sizeof(boardList)/4) ; i++)
|
|
if (strcmp(boardName, (boardList[i])->name) == 0) {
|
|
boardDescription = (BoardResourcesType *) boardList[i];
|
|
break;
|
|
}
|
|
|
|
if (boardDescription == NULL) {
|
|
/* Board type not identified default to MB851A also to support legacy boards */
|
|
boardDescription = (BoardResourcesType *) &IDZ401V1;
|
|
}
|
|
return;
|
|
}
|
|
|
|
BoardResourcesType const *halBoardGetDescription(void)
|
|
{
|
|
return boardDescription;
|
|
}
|
|
|
|
void halBoardPowerDown(void)
|
|
{
|
|
/* Set everything to input value */
|
|
GPIO_PACFGL = (GPIOCFG_IN <<PA0_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA1_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA2_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA3_CFG_BIT);
|
|
GPIO_PACFGH = (GPIOCFG_IN <<PA4_CFG_BIT)| /* PTI EN */
|
|
(GPIOCFG_IN <<PA5_CFG_BIT)| /* PTI_DATA */
|
|
(GPIOCFG_IN <<PA6_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA7_CFG_BIT);
|
|
GPIO_PBCFGL = (GPIOCFG_IN <<PB0_CFG_BIT)|
|
|
(GPIOCFG_IN <<PB1_CFG_BIT)| /* Uart TX */
|
|
(GPIOCFG_IN <<PB2_CFG_BIT)| /* Uart RX */
|
|
(GPIOCFG_IN <<PB3_CFG_BIT);
|
|
GPIO_PBCFGH = (GPIOCFG_IN <<PB4_CFG_BIT)|
|
|
(GPIOCFG_IN <<PB5_CFG_BIT)|
|
|
(GPIOCFG_IN <<PB6_CFG_BIT)|
|
|
(GPIOCFG_IN <<PB7_CFG_BIT);
|
|
GPIO_PCCFGL = (GPIOCFG_IN <<PC0_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC1_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC2_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC3_CFG_BIT);
|
|
GPIO_PCCFGH = (GPIOCFG_IN <<PC4_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC5_CFG_BIT)|
|
|
#ifdef EMBERZNET_HAL
|
|
(CFG_C6 <<PC6_CFG_BIT)| /* OSC32K */
|
|
(CFG_C7 <<PC7_CFG_BIT); /* OSC32K */
|
|
#else
|
|
(GPIOCFG_IN <<PC6_CFG_BIT)| /* OSC32K */
|
|
(GPIOCFG_IN <<PC7_CFG_BIT); /* OSC32K */
|
|
#endif
|
|
|
|
|
|
/* Configure GPIO for BUTTONSs */
|
|
{
|
|
ButtonResourceType *buttons = (ButtonResourceType *) boardDescription->io->buttons;
|
|
uint8_t i;
|
|
for (i = 0; i < boardDescription->buttons; i++) {
|
|
halGpioConfig(PORTx_PIN(buttons[i].gpioPort, buttons[i].gpioPin), GPIOCFG_IN_PUD);
|
|
halGpioSet(PORTx_PIN(buttons[i].gpioPort, buttons[i].gpioPin), GPIOOUT_PULLUP);
|
|
}
|
|
}
|
|
|
|
/* Configure GPIO for LEDs */
|
|
{
|
|
LedResourceType *leds = (LedResourceType *) boardDescription->io->leds;
|
|
uint8_t i;
|
|
for (i = 0; i < boardDescription->leds; i++) {
|
|
/* LED default off */
|
|
halGpioConfig(PORTx_PIN(leds[i].gpioPort, leds[i].gpioPin), GPIOCFG_OUT);
|
|
halGpioSet(PORTx_PIN(leds[i].gpioPort, leds[i].gpioPin), 1);
|
|
}
|
|
}
|
|
|
|
/* Configure GPIO for power amplifier */
|
|
if (boardDescription->flags & BOARD_HAS_PA) {
|
|
/* SiGe Ant Sel to output */
|
|
halGpioConfig(PORTB_PIN(5), GPIOCFG_OUT);
|
|
halGpioSet(PORTB_PIN(5), 1);
|
|
/* SiGe Standby */
|
|
halGpioConfig(PORTB_PIN(6), GPIOCFG_OUT);
|
|
halGpioSet(PORTB_PIN(6), 0);
|
|
}
|
|
|
|
}
|
|
void halBoardPowerUp(void)
|
|
{
|
|
|
|
/* Set everything to input value */
|
|
GPIO_PACFGL = (GPIOCFG_IN <<PA0_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA1_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA2_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA3_CFG_BIT);
|
|
GPIO_PACFGH = (GPIOCFG_IN <<PA4_CFG_BIT)| /* PTI EN */
|
|
(GPIOCFG_IN <<PA5_CFG_BIT)| /* PTI_DATA */
|
|
(GPIOCFG_IN <<PA6_CFG_BIT)|
|
|
(GPIOCFG_IN <<PA7_CFG_BIT);
|
|
GPIO_PBCFGL = (GPIOCFG_IN <<PB0_CFG_BIT)|
|
|
(GPIOCFG_OUT_ALT <<PB1_CFG_BIT)| /* Uart TX */
|
|
(GPIOCFG_IN <<PB2_CFG_BIT)| /* Uart RX */
|
|
(GPIOCFG_IN <<PB3_CFG_BIT);
|
|
GPIO_PBCFGH = (GPIOCFG_IN <<PB4_CFG_BIT)|
|
|
(GPIOCFG_IN <<PB5_CFG_BIT)|
|
|
(GPIOCFG_IN <<PB6_CFG_BIT)|
|
|
(GPIOCFG_IN <<PB7_CFG_BIT);
|
|
GPIO_PCCFGL = (GPIOCFG_IN <<PC0_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC1_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC2_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC3_CFG_BIT);
|
|
GPIO_PCCFGH = (GPIOCFG_IN <<PC4_CFG_BIT)|
|
|
(GPIOCFG_IN <<PC5_CFG_BIT)|
|
|
#ifdef EMBERZNET_HAL
|
|
(CFG_C6 <<PC6_CFG_BIT)| /* OSC32K */
|
|
(CFG_C7 <<PC7_CFG_BIT); /* OSC32K */
|
|
#else
|
|
(GPIOCFG_IN <<PC6_CFG_BIT)| /* OSC32K */
|
|
(GPIOCFG_IN <<PC7_CFG_BIT); /* OSC32K */
|
|
#endif
|
|
|
|
/* Configure GPIO for I2C access */
|
|
if ((boardDescription->flags & BOARD_HAS_MEMS) || (boardDescription->flags & BOARD_HAS_EEPROM)) {
|
|
halGpioConfig(PORTA_PIN(1), GPIOCFG_OUT_ALT_OD);
|
|
halGpioConfig(PORTA_PIN(2), GPIOCFG_OUT_ALT_OD);
|
|
}
|
|
/* Configure GPIO for ADC access (temp sensor) */
|
|
if (boardDescription->flags & BOARD_HAS_TEMP_SENSOR) {
|
|
halGpioConfig(PORTx_PIN(boardDescription->temperatureSensor->gpioPort,
|
|
boardDescription->temperatureSensor->gpioPin),
|
|
GPIOCFG_ANALOG);
|
|
}
|
|
/* Configure GPIO for LEDs */
|
|
{
|
|
LedResourceType *leds = (LedResourceType *) boardDescription->io->leds;
|
|
uint8_t i;
|
|
for (i = 0; i < boardDescription->leds; i++) {
|
|
/* LED default off */
|
|
halGpioConfig(PORTx_PIN(leds[i].gpioPort, leds[i].gpioPin), GPIOCFG_OUT);
|
|
halGpioSet(PORTx_PIN(leds[i].gpioPort, leds[i].gpioPin), 1);
|
|
}
|
|
}
|
|
/* Configure GPIO for BUTTONSs */
|
|
{
|
|
ButtonResourceType *buttons = (ButtonResourceType *) boardDescription->io->buttons;
|
|
uint8_t i;
|
|
for (i = 0; i < boardDescription->buttons; i++) {
|
|
halGpioConfig(PORTx_PIN(buttons[i].gpioPort, buttons[i].gpioPin), GPIOCFG_IN_PUD);
|
|
halGpioSet(PORTx_PIN(buttons[i].gpioPort, buttons[i].gpioPin), GPIOOUT_PULLUP);
|
|
}
|
|
}
|
|
|
|
/* Configure GPIO for power amplifier */
|
|
if (boardDescription->flags & BOARD_HAS_PA) {
|
|
/* SiGe Ant Sel (default ceramic antenna) */
|
|
halGpioConfig(PORTB_PIN(5), GPIOCFG_OUT);
|
|
halGpioSet(PORTB_PIN(5), 1);
|
|
/* SiGe Standby (default out of standby) */
|
|
halGpioConfig(PORTB_PIN(6), GPIOCFG_OUT);
|
|
halGpioSet(PORTB_PIN(6), 1);
|
|
/* SiGe LNA (default LNA off )*/
|
|
halGpioConfig(PORTB_PIN(7), GPIOCFG_OUT);
|
|
halGpioSet(PORTB_PIN(7), 0);
|
|
/* SiGe nTX Active */
|
|
halGpioConfig(PORTC_PIN(5), GPIOCFG_OUT_ALT);
|
|
}
|
|
}
|
|
|
|
|
|
#include <stdio.h>
|
|
void printLeds (void)
|
|
{
|
|
uint8_t i=0;
|
|
LedResourceType *leds;
|
|
leds = (LedResourceType *) boardDescription->io->leds;
|
|
while (i < boardDescription->leds) {
|
|
printf ("Led %s (port:%s, bit:%d)\r\n", leds->name, PORT_NAME(leds->gpioPort), leds->gpioPin);
|
|
leds++; i++;
|
|
}
|
|
}
|
|
|
|
void printButtons (void)
|
|
{
|
|
uint8_t i=0;
|
|
ButtonResourceType *buttons;
|
|
buttons = (ButtonResourceType *) boardDescription->io->buttons;
|
|
while (i < boardDescription->buttons) {
|
|
printf ("Button %s (port:%s, bit:%d)\r\n", buttons->name, PORT_NAME(buttons->gpioPort), buttons->gpioPin);
|
|
buttons++; i++;
|
|
}
|
|
}
|
|
|
|
void boardPrintStringDescription(void)
|
|
{
|
|
|
|
if (boardDescription != NULL) {
|
|
printf ("*************************************\r\n");
|
|
printf ("Board name = %s\r\n", boardDescription->name);
|
|
printf ("*************************************\r\n");
|
|
printf("Number of leds on the board: %d\n", boardDescription->leds);
|
|
printf("Number of buttons on the board: %d\n", boardDescription->buttons);
|
|
printLeds();
|
|
printButtons();
|
|
if (boardDescription->mems) {
|
|
printf ("MEMS = %s\r\n", boardDescription->mems->name);
|
|
}
|
|
if (boardDescription->temperatureSensor) {
|
|
printf ("Temp sensor = %s, port:%s, pin:%d, div:%d, adcFix:%s\r\n",
|
|
boardDescription->temperatureSensor->name,
|
|
PORT_NAME(boardDescription->temperatureSensor->gpioPort),
|
|
boardDescription->temperatureSensor->gpioPin,
|
|
boardDescription->temperatureSensor->div,
|
|
boardDescription->temperatureSensor->adcFix ? "Yes" : "No"
|
|
);
|
|
}
|
|
|
|
printf ("EEProm:%s\r\n", (boardDescription->flags & BOARD_HAS_EEPROM) ? "Yes" : "No");
|
|
printf ("PC i/f:%s\r\n", (boardDescription->flags & BOARD_HAS_FTDI) ? "FTDI" : "STM32F");
|
|
printf ("Power Amplifier:%s\r\n", (boardDescription->flags & BOARD_HAS_PA) ? "Yes" : "No");
|
|
|
|
}
|
|
}
|
|
/** @} */
|