nes-proj/arch/platform/z1/platform.c
2019-01-14 14:55:34 +00:00

293 lines
8.5 KiB
C

/*
* Copyright (c) 2006, Swedish Institute of Computer Science
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <stdio.h>
#include <string.h>
#include <stdarg.h>
#include "contiki.h"
#include "cc2420.h"
#include "dev/leds.h"
#include "dev/serial-line.h"
#include "dev/slip.h"
#include "dev/uart0.h"
#include "dev/watchdog.h"
#include "dev/xmem.h"
#include "lib/random.h"
#include "net/netstack.h"
#include "net/mac/framer/frame802154.h"
#include "dev/adxl345.h"
#include "sys/clock.h"
#include "sys/energest.h"
#if NETSTACK_CONF_WITH_IPV6
#include "net/ipv6/uip-ds6.h"
#endif /* NETSTACK_CONF_WITH_IPV6 */
#include "node-id-z1.h"
#include "cfs-coffee-arch.h"
#include "cfs/cfs-coffee.h"
extern unsigned char node_mac[8];
#if DCOSYNCH_CONF_ENABLED
static struct timer mgt_timer;
#endif
extern int msp430_dco_required;
#define UIP_OVER_MESH_CHANNEL 8
#if NETSTACK_CONF_WITH_IPV4
static uint8_t is_gateway;
#endif /* NETSTACK_CONF_WITH_IPV4 */
#ifdef EXPERIMENT_SETUP
#include "experiment-setup.h"
#endif
void init_platform(void);
/*---------------------------------------------------------------------------*/
/* Log configuration */
#include "sys/log.h"
#define LOG_MODULE "Z1"
#define LOG_LEVEL LOG_LEVEL_MAIN
/*---------------------------------------------------------------------------*/
#ifdef UART0_CONF_BAUD_RATE
#define UART0_BAUD_RATE UART0_CONF_BAUD_RATE
#else
#define UART0_BAUD_RATE 115200
#endif
/*---------------------------------------------------------------------------*/
#if 0
int
force_float_inclusion()
{
extern int __fixsfsi;
extern int __floatsisf;
extern int __mulsf3;
extern int __subsf3;
return __fixsfsi + __floatsisf + __mulsf3 + __subsf3;
}
#endif
/*---------------------------------------------------------------------------*/
void
uip_log(char *msg)
{
puts(msg);
}
/*---------------------------------------------------------------------------*/
#if 0
void
force_inclusion(int d1, int d2)
{
snprintf(NULL, 0, "%d", d1 % d2);
}
#endif
/*---------------------------------------------------------------------------*/
static void
set_lladdr(void)
{
linkaddr_t addr;
memset(&addr, 0, sizeof(linkaddr_t));
#if NETSTACK_CONF_WITH_IPV6
memcpy(addr.u8, node_mac, sizeof(addr.u8));
#else
if(node_id == 0) {
int i;
for(i = 0; i < sizeof(linkaddr_t); ++i) {
addr.u8[i] = node_mac[7 - i];
}
} else {
addr.u8[0] = node_id & 0xff;
addr.u8[1] = node_id >> 8;
}
#endif
linkaddr_set_node_addr(&addr);
}
/*---------------------------------------------------------------------------*/
void
platform_init_stage_one(void)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
leds_init();
leds_on(LEDS_RED);
}
/*---------------------------------------------------------------------------*/
void
platform_init_stage_two(void)
{
clock_wait(100);
uart0_init(BAUD2UBR(UART0_BAUD_RATE)); /* Must come before first printf */
xmem_init();
leds_off(LEDS_RED);
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
node_id_z1_restore();
/* If no MAC address was burned, we use the node id or the Z1 product ID */
if(!(node_mac[0] | node_mac[1] | node_mac[2] | node_mac[3] |
node_mac[4] | node_mac[5] | node_mac[6] | node_mac[7])) {
#ifdef SERIALNUM
if(!node_id) {
LOG_INFO("Node id is not set, using Z1 product ID\n");
node_id = SERIALNUM;
}
#endif
node_mac[0] = 0xc1; /* Hardcoded for Z1 */
node_mac[1] = 0x0c; /* Hardcoded for Revision C */
node_mac[2] = 0x00; /* Hardcoded to arbitrary even number so that
the 802.15.4 MAC address is compatible with
an Ethernet MAC address - byte 0 (byte 2 in
the DS ID) */
node_mac[3] = 0x00; /* Hardcoded */
node_mac[4] = 0x00; /* Hardcoded */
node_mac[5] = 0x00; /* Hardcoded */
node_mac[6] = node_id >> 8;
node_mac[7] = node_id & 0xff;
}
/* Overwrite node MAC if desired at compile time */
#ifdef MACID
#warning "***** CHANGING DEFAULT MAC *****"
node_mac[0] = 0xc1; /* Hardcoded for Z1 */
node_mac[1] = 0x0c; /* Hardcoded for Revision C */
node_mac[2] = 0x00; /* Hardcoded to arbitrary even number so that
the 802.15.4 MAC address is compatible with
an Ethernet MAC address - byte 0 (byte 2 in
the DS ID) */
node_mac[3] = 0x00; /* Hardcoded */
node_mac[4] = 0x00; /* Hardcoded */
node_mac[5] = 0x00; /* Hardcoded */
node_mac[6] = MACID >> 8;
node_mac[7] = MACID & 0xff;
#endif
#ifdef IEEE_802154_MAC_ADDRESS
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
node_mac[7] = node_id & 0xff;
}
#endif /* IEEE_802154_MAC_ADDRESS */
random_init(node_mac[6] + node_mac[7]);
set_lladdr();
/*
* main() will turn the radio on inside netstack_init(). The CC2420
* must already be initialised by that time, so we do this here early.
* Later on in stage three we set correct values for PANID and radio
* short/long address.
*/
cc2420_init();
SENSORS_ACTIVATE(adxl345);
leds_off(LEDS_ALL);
}
/*---------------------------------------------------------------------------*/
void
platform_init_stage_three(void)
{
uint8_t longaddr[8];
uint16_t shortaddr;
init_platform();
shortaddr = (linkaddr_node_addr.u8[0] << 8) + linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
LOG_INFO("CC2420 CCA threshold %i\n", CC2420_CONF_CCA_THRESH);
#if DCOSYNCH_CONF_ENABLED
timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
}
/*---------------------------------------------------------------------------*/
void
platform_idle(void)
{
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart0_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart0_active()) {
splx(s); /* Re-enable interrupts. */
} else {
#if DCOSYNCH_CONF_ENABLED
/* before going down to sleep possibly do some management */
if(timer_expired(&mgt_timer)) {
watchdog_periodic();
timer_reset(&mgt_timer);
msp430_sync_dco();
#if CC2420_CONF_SFD_TIMESTAMPS
cc2420_arch_sfd_init();
#endif /* CC2420_CONF_SFD_TIMESTAMPS */
}
#endif
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
watchdog_stop();
/* check if the DCO needs to be on - if so - only LPM 1 */
if (msp430_dco_required) {
_BIS_SR(GIE | CPUOFF); /* LPM1 sleep for DMA to work!. */
} else {
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
}
watchdog_start();
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
}
}
/*---------------------------------------------------------------------------*/