udp: client

This commit is contained in:
giomba 2021-12-26 18:24:23 +01:00
parent 7cfec6898e
commit 9febc5dc06
5 changed files with 122 additions and 15 deletions

1
examples/simple-udp-client/.gitignore vendored Normal file
View File

@ -0,0 +1 @@
/build/

View File

@ -0,0 +1,15 @@
BOARD ?= arduino:avr:diecimila
PORT ?= /dev/ttyUSB0
CCFLAGS += -Icfg
.PHONY: build flash
build:
arduino-cli compile -v -e --libraries coppino -b $(BOARD)
flash:
arduino-cli -b $(BOARD) -p $(PORT) -v upload
clean:
rm -r build

View File

@ -0,0 +1,47 @@
#include "coppino.h"
#include "ipv6.h"
#include "slip.h"
#include "udp.h"
const char MY_ADDRESS[] = "\x20\x01\x04\x70\xc8\x44\x00\x31\x00\x00\x00\x00\x00\x00\xca\xfe";
void setup()
{
/* Customize coppino library configuration settings by editing settings.h */
/* setup serial for Internet connectivity
* attach a SLIP daemon on the other endpoint; a good one is `tunslip6` by Contiki
* $ tunslip6 -s /dev/ttyUSB0 -L -v5 -B 19200 2001:db8:1324::1/64
* Note: the address given is the one on the host it is running on
*/
Serial.begin(19200);
/* set unique identifier of network hardware. It MUST be unique!
* For example, this could be your microcontroller serial number
* Note: pay attention to enter exactly 64 bits / 8 bytes
*/
ipv6::setEUI("\xde\xad\xbe\xef\x12\x34\x56\x78");
/* set global address -- will be overwritten if SLAAC is enabled and a Router Advertisement is received */
ipv6::setGlobalAddress(MY_ADDRESS);
}
void loop()
{
char message[16];
ipv6::IPv6Addr srcaddr = ipv6::IPv6Addr(MY_ADDRESS);
ipv6::IPv6Addr dstaddr = ipv6::IPv6Addr("\x20\x01\x04\x70\xc8\x44\x00\x31\x00\x00\x00\x00\x00\x00\x00\x01");
uint16_t srcport = 1337;
uint16_t dstport = 1234;
udp::UDPClient udpclient = udp::UDPClient(srcaddr, dstaddr, srcport, dstport);
while (true)
{
for (int i = 0; i < 32; ++i)
{
sprintf(message, "iteration #%d\r\n", i);
udpclient.send_datagram((const uint8_t *)message, strlen(message));
delay(1000);
}
}
}

View File

@ -87,4 +87,32 @@ namespace udp
return -1; return -1;
} }
UDPClient::UDPClient(
const ipv6::IPv6Addr &_srcaddr,
ipv6::IPv6Addr &_dstaddr,
const uint16_t _srcport,
const uint16_t _dstport) : srcaddr(_srcaddr),
dstaddr(_dstaddr),
srcport(_srcport),
dstport(_dstport)
{
;
}
void UDPClient::send_datagram(const uint8_t *obuffer, size_t len)
{
UDPPacket *outgoing_packet = (UDPPacket *)(((uint8_t *)&ipv6::packetout) + 40);
outgoing_packet->setSrcPort(srcport);
outgoing_packet->setDstPort(dstport);
outgoing_packet->setPayload((const char *)obuffer, len);
outgoing_packet->computeChecksum(&srcaddr, &dstaddr, len + 8);
ipv6::packetout.setLen(len + 8);
ipv6::packetout.setFlow("\x26\x12\x21");
ipv6::packetout.setSrcAddress(&srcaddr);
ipv6::packetout.setDstAddress(&dstaddr);
ipv6::packetout.setNextHeader(ipv6::NH_UDP);
ipv6::packetout.send();
}
} }

View File

@ -4,10 +4,13 @@
#include "Arduino.h" #include "Arduino.h"
#include "ipv6.h" #include "ipv6.h"
namespace udp { namespace udp
class UDPPacket { {
class UDPPacket
{
private: private:
char packet[ipv6::LEN - 40]; char packet[ipv6::LEN - 40];
public: public:
void setSrcPort(uint16_t port); void setSrcPort(uint16_t port);
uint16_t getSrcPort(); uint16_t getSrcPort();
@ -18,6 +21,19 @@ namespace udp {
void computeChecksum(const ipv6::IPv6Addr *src_addr, const ipv6::IPv6Addr *dst_addr, int len); /* computes and updates checksum in the packet */ void computeChecksum(const ipv6::IPv6Addr *src_addr, const ipv6::IPv6Addr *dst_addr, int len); /* computes and updates checksum in the packet */
}; };
class UDPClient
{
private:
const ipv6::IPv6Addr &srcaddr;
const ipv6::IPv6Addr &dstaddr;
const uint16_t srcport;
const uint16_t dstport;
public:
UDPClient(const ipv6::IPv6Addr &srcaddr, ipv6::IPv6Addr &dstaddr, const uint16_t srcport, const uint16_t dstport);
void send_datagram(const uint8_t *payload, size_t len);
};
/* UDP handler for lower layer protocol */ /* UDP handler for lower layer protocol */
int handleUDP(char *output_buffer, const char *input_buffer, int len); int handleUDP(char *output_buffer, const char *input_buffer, int len);