nes-proj/arch/platform/zoul/contiki-conf.h

186 lines
6.5 KiB
C
Raw Normal View History

/*
* Copyright (c) 2015, Zolertia - http://www.zolertia.com
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**
2017-12-02 22:59:15 +00:00
* \addtogroup zoul-core
* @{
*
2017-09-29 20:18:48 +00:00
* \defgroup zoul-platforms Zolertia Zoul platforms
*
2015-11-24 12:09:23 +00:00
* The Zoul allows a fast reuse and easy integration to most applications and
* products. Its small size and module format eases to place in different PCB
* designs and to integrate in existing products. The Zoul-based platforms
* share most of the Zoul core implementation.
*
* \file
* Configuration for the Zoul-based platforms
*/
#ifndef CONTIKI_CONF_H_
#define CONTIKI_CONF_H_
#include <stdint.h>
#include <string.h>
2018-02-23 17:03:29 +00:00
#include <inttypes.h>
/*---------------------------------------------------------------------------*/
/* Include Project Specific conf */
#ifdef PROJECT_CONF_PATH
#include PROJECT_CONF_PATH
#endif /* PROJECT_CONF_PATH */
/*---------------------------------------------------------------------------*/
#include "cc2538-def.h"
2016-06-09 14:47:00 +00:00
/*---------------------------------------------------------------------------*/
/**
* \name Serial Boot Loader Backdoor configuration
*
* @{
*/
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR
2015-11-24 12:09:23 +00:00
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR 1 /**<Enable the boot loader backdoor */
#endif
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN 3 /**< Pin PA_3 (user button), activates the boot loader */
#endif
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH 0 /**< A logic low level activates the boot loader */
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name CC2538 System Control configuration
*
* @{
*/
#ifndef SYS_CTRL_CONF_OSC32K_USE_XTAL
#define SYS_CTRL_CONF_OSC32K_USE_XTAL 1 /**< Use the on-board 32.768-kHz crystal */
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/* board.h assumes that basic configuration is done */
#include "board.h"
#define PLATFORM_SUPPORTS_BUTTON_HAL PLATFORM_HAS_BUTTON
/*---------------------------------------------------------------------------*/
/**
2017-05-16 16:34:32 +00:00
* \name Radio Configuration
*
* @{
*/
2017-05-17 19:47:48 +00:00
/* Configure CSMA for when it's selected */
#if CC1200_CONF_SUBGHZ_50KBPS_MODE
#define NETSTACK_CONF_RADIO cc1200_driver
#define CC1200_CONF_RF_CFG cc1200_802154g_863_870_fsk_50kbps
#define ANTENNA_SW_SELECT_DEF_CONF ANTENNA_SW_SELECT_SUBGHZ
#define CC1200_CONF_USE_GPIO2 0
#define CC1200_CONF_USE_RX_WATCHDOG 0
2017-05-17 19:47:48 +00:00
#define CSMA_CONF_ACK_WAIT_TIME (RTIMER_SECOND / 200)
#define CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME (RTIMER_SECOND / 1500)
#endif
/* This can be overriden to use the cc1200_driver instead */
#ifndef NETSTACK_CONF_RADIO
#define NETSTACK_CONF_RADIO cc2538_rf_driver
#endif
2015-11-24 12:09:23 +00:00
/*
* RE-Mote specific:
* If dual RF enabled, we set the RF switch to enable the CC1200 and use 2.4GHz
* on the available uFl/chip antenna (not mounted as default). In contiki main
* platform routine we set the right antenna depending on NETSTACK_CONF_RADIO,
* but as changing the RF antenna also implies enabling/disabling the CC1200,
* is better to start off with the right configuration
*/
#if REMOTE_DUAL_RF_ENABLED
#define ANTENNA_SW_SELECT_DEFAULT ANTENNA_SW_SELECT_SUBGHZ
2015-11-24 12:09:23 +00:00
#else /* REMOTE_DUAL_RF_ENABLED */
#ifndef ANTENNA_SW_SELECT_DEF_CONF
#define ANTENNA_SW_SELECT_DEFAULT ANTENNA_SW_SELECT_2_4GHZ
2015-11-24 12:09:23 +00:00
#else /* ANTENNA_SW_SELECT_DEF_CONF */
#define ANTENNA_SW_SELECT_DEFAULT ANTENNA_SW_SELECT_DEF_CONF
#endif /* ANTENNA_SW_SELECT_DEF_CONF */
#endif /* REMOTE_DUAL_RF_ENABLED */
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name LPM configuration
* @{
*/
#ifndef LPM_CONF_ENABLE
#define LPM_CONF_ENABLE 1 /**< Set to 0 to disable LPM entirely */
#endif
/**
* \brief Maximum PM
*
* The SoC will never drop to a Power Mode deeper than the one specified here.
* 0 for PM0, 1 for PM1 and 2 for PM2
*/
#ifndef LPM_CONF_MAX_PM
#define LPM_CONF_MAX_PM 2
#endif
#ifndef LPM_CONF_STATS
#define LPM_CONF_STATS 0 /**< Set to 1 to enable LPM-related stats */
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/**
* \name RTC
*
* @{
*/
#ifdef PLATFORM_HAS_RTC
#ifndef RTC_CONF_INIT
#define RTC_CONF_INIT 0 /**< Whether to initialize the RTC */
#endif
#ifndef RTC_CONF_SET_FROM_SYS
#define RTC_CONF_SET_FROM_SYS 0 /**< Whether to set the RTC from the build system */
#endif
#else
#undef RTC_CONF_INIT
#define RTC_CONF_INIT 0
#endif
/** @} */
/*---------------------------------------------------------------------------*/
/* Include CPU-related configuration */
#include "cc2538-conf.h"
/*---------------------------------------------------------------------------*/
#endif /* CONTIKI_CONF_H_ */
/*---------------------------------------------------------------------------*/
/** @} */