nes-proj/arch/cpu/cc26xx-cc13xx/dev/gpio-hal-arch.c

157 lines
5.2 KiB
C
Raw Normal View History

/*
* Copyright (c) 2017, George Oikonomou - http://www.spd.gr
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*---------------------------------------------------------------------------*/
/**
* \addtogroup cc26xx-gpio-hal
* @{
*
* \file
* Implementation file for the CC13xx/CC26xx GPIO HAL functions
*/
/*---------------------------------------------------------------------------*/
#include "contiki.h"
#include "ti-lib.h"
#include "ti-lib-rom.h"
#include "dev/gpio-hal.h"
#include <stdint.h>
/*---------------------------------------------------------------------------*/
#define CONFIG_MASK (IOC_IOPULL_M | IOC_INT_M | IOC_IOMODE_OPEN_SRC_INV)
/*---------------------------------------------------------------------------*/
void
gpio_hal_arch_pin_cfg_set(gpio_hal_pin_t pin, gpio_hal_pin_cfg_t cfg)
{
uint32_t config;
gpio_hal_pin_cfg_t tmp;
/* Clear settings that we are about to change, keep everything else */
config = ti_lib_rom_ioc_port_configure_get(pin);
config &= ~CONFIG_MASK;
tmp = cfg & GPIO_HAL_PIN_CFG_EDGE_BOTH;
if(tmp == GPIO_HAL_PIN_CFG_EDGE_NONE) {
config |= IOC_NO_EDGE;
} else if(tmp == GPIO_HAL_PIN_CFG_EDGE_RISING) {
config |= IOC_RISING_EDGE;
} else if(tmp == GPIO_HAL_PIN_CFG_EDGE_FALLING) {
config |= IOC_FALLING_EDGE;
} else if(tmp == GPIO_HAL_PIN_CFG_EDGE_BOTH) {
config |= IOC_BOTH_EDGES;
}
tmp = cfg & GPIO_HAL_PIN_CFG_PULL_MASK;
if(tmp == GPIO_HAL_PIN_CFG_PULL_NONE) {
config |= IOC_NO_IOPULL;
} else if(tmp == GPIO_HAL_PIN_CFG_PULL_DOWN) {
config |= IOC_IOPULL_DOWN;
} else if(tmp == GPIO_HAL_PIN_CFG_PULL_UP) {
config |= IOC_IOPULL_UP;
}
tmp = cfg & GPIO_HAL_PIN_CFG_INT_MASK;
if(tmp == GPIO_HAL_PIN_CFG_INT_DISABLE) {
config |= IOC_INT_DISABLE;
} else if(tmp == GPIO_HAL_PIN_CFG_INT_ENABLE) {
config |= IOC_INT_ENABLE;
}
ti_lib_rom_ioc_port_configure_set(pin, IOC_PORT_GPIO, config);
}
/*---------------------------------------------------------------------------*/
gpio_hal_pin_cfg_t
gpio_hal_arch_pin_cfg_get(gpio_hal_pin_t pin)
{
gpio_hal_pin_cfg_t cfg;
uint32_t tmp;
uint32_t config;
cfg = 0;
config = ti_lib_rom_ioc_port_configure_get(pin);
/* Pull */
tmp = config & IOC_IOPULL_M;
if(tmp == IOC_IOPULL_UP) {
cfg |= GPIO_HAL_PIN_CFG_PULL_UP;
} else if(tmp == IOC_IOPULL_DOWN) {
cfg |= GPIO_HAL_PIN_CFG_PULL_DOWN;
} else if(tmp == IOC_NO_IOPULL) {
cfg |= GPIO_HAL_PIN_CFG_PULL_NONE;
}
/* Interrupt enable/disable */
tmp = config & IOC_INT_ENABLE;
if(tmp == IOC_INT_DISABLE) {
cfg |= GPIO_HAL_PIN_CFG_INT_DISABLE;
} else if(tmp == IOC_INT_ENABLE) {
cfg |= GPIO_HAL_PIN_CFG_INT_ENABLE;
}
/* Edge detection */
tmp = config & IOC_BOTH_EDGES;
if(tmp == IOC_NO_EDGE) {
cfg |= GPIO_HAL_PIN_CFG_EDGE_NONE;
} else if(tmp == IOC_FALLING_EDGE) {
cfg |= GPIO_HAL_PIN_CFG_EDGE_FALLING;
} else if(tmp == IOC_RISING_EDGE) {
cfg |= GPIO_HAL_PIN_CFG_EDGE_RISING;
} else if(tmp == IOC_BOTH_EDGES) {
cfg |= GPIO_HAL_PIN_CFG_EDGE_BOTH;
}
return cfg;
}
/*---------------------------------------------------------------------------*/
gpio_hal_pin_mask_t
gpio_hal_arch_read_pins(gpio_hal_pin_mask_t pins)
{
gpio_hal_pin_mask_t oe_pins;
/* For pins configured as output we need to read DOUT31_0 */
oe_pins = ti_lib_gpio_get_output_enable_multi_dio(pins);
pins &= ~oe_pins;
return (HWREG(GPIO_BASE + GPIO_O_DOUT31_0) & oe_pins) |
ti_lib_gpio_read_multi_dio(pins);
}
/*---------------------------------------------------------------------------*/
uint8_t
gpio_hal_arch_read_pin(gpio_hal_pin_t pin)
{
if(ti_lib_gpio_get_output_enable_dio(pin)) {
return (HWREG(GPIO_BASE + GPIO_O_DOUT31_0) >> pin) & 1;
}
return ti_lib_gpio_read_dio(pin);
}
/*---------------------------------------------------------------------------*/
/** @} */