2017-12-03 00:46:24 +00:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2017, George Oikonomou - http://www.spd.gr
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
*
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
|
|
* \addtogroup cc26xx
|
|
|
|
* @{
|
|
|
|
*
|
|
|
|
* \file
|
|
|
|
* Header with configuration defines common to all CC13xx/CC26xx platforms
|
|
|
|
*/
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
#ifndef CC13XX_CC26XX_CONF_H_
|
|
|
|
#define CC13XX_CC26XX_CONF_H_
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
|
|
* \name Network Stack Configuration
|
|
|
|
*
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If set, the systems keeps the HF crystal oscillator on even when the radio is off.
|
|
|
|
* You need to set this to 1 to use TSCH with its default 2.2ms or larger guard time.
|
|
|
|
*/
|
|
|
|
#ifndef CC2650_FAST_RADIO_STARTUP
|
|
|
|
#define CC2650_FAST_RADIO_STARTUP (MAC_CONF_WITH_TSCH)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Number of Prop Mode RX buffers */
|
|
|
|
#ifndef PROP_MODE_CONF_RX_BUF_CNT
|
|
|
|
#define PROP_MODE_CONF_RX_BUF_CNT 4
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Auto-configure Prop-mode radio if we are running on CC13xx, unless the
|
|
|
|
* project has specified otherwise. Depending on the final mode, determine a
|
|
|
|
* default channel (again, if unspecified) and configure RDC params
|
|
|
|
*/
|
2018-10-02 22:14:26 +00:00
|
|
|
#if CPU_FAMILY_CC13X0
|
2017-12-03 00:46:24 +00:00
|
|
|
#ifndef CC13XX_CONF_PROP_MODE
|
|
|
|
#define CC13XX_CONF_PROP_MODE 1
|
|
|
|
#endif /* CC13XX_CONF_PROP_MODE */
|
2018-10-02 22:14:26 +00:00
|
|
|
#endif /* CPU_FAMILY_CC13X0 */
|
2017-12-03 00:46:24 +00:00
|
|
|
|
|
|
|
#if CC13XX_CONF_PROP_MODE
|
2018-09-04 16:31:48 +00:00
|
|
|
#ifndef NETSTACK_CONF_RADIO
|
2017-12-03 00:46:24 +00:00
|
|
|
#define NETSTACK_CONF_RADIO prop_mode_driver
|
2018-09-04 16:31:48 +00:00
|
|
|
#endif /* NETSTACK_CONF_RADIO */
|
2017-12-03 00:46:24 +00:00
|
|
|
|
2018-04-13 09:29:56 +00:00
|
|
|
/* Channels count from 0 upwards in IEEE 802.15.4g */
|
|
|
|
#ifndef IEEE802154_CONF_DEFAULT_CHANNEL
|
|
|
|
#define IEEE802154_CONF_DEFAULT_CHANNEL 0
|
|
|
|
#endif /* IEEE802154_CONF_DEFAULT_CHANNEL */
|
2017-12-03 00:46:24 +00:00
|
|
|
|
2018-05-03 15:00:07 +00:00
|
|
|
#ifndef CSMA_CONF_ACK_WAIT_TIME
|
2017-12-03 00:46:24 +00:00
|
|
|
#define CSMA_CONF_ACK_WAIT_TIME (RTIMER_SECOND / 400)
|
2018-05-03 15:00:07 +00:00
|
|
|
#endif /* CSMA_CONF_ACK_WAIT_TIME */
|
|
|
|
|
|
|
|
#ifndef CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME
|
2017-12-03 00:46:24 +00:00
|
|
|
#define CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME (RTIMER_SECOND / 1000)
|
2018-05-03 15:00:07 +00:00
|
|
|
#endif /* CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME */
|
|
|
|
|
|
|
|
#ifndef CSMA_CONF_SEND_SOFT_ACK
|
2017-12-03 00:46:24 +00:00
|
|
|
#define CSMA_CONF_SEND_SOFT_ACK 1
|
2018-05-03 15:00:07 +00:00
|
|
|
#endif /* CSMA_CONF_SEND_SOFT_ACK */
|
2017-12-03 00:46:24 +00:00
|
|
|
|
|
|
|
#else /* CC13XX_CONF_PROP_MODE */
|
2017-12-15 10:35:16 +00:00
|
|
|
#ifndef NETSTACK_CONF_RADIO
|
2017-12-03 00:46:24 +00:00
|
|
|
#define NETSTACK_CONF_RADIO ieee_mode_driver
|
2017-12-15 10:35:16 +00:00
|
|
|
#endif
|
2017-12-03 00:46:24 +00:00
|
|
|
|
|
|
|
#define CSMA_CONF_SEND_SOFT_ACK 0
|
|
|
|
#endif /* CC13XX_CONF_PROP_MODE */
|
|
|
|
|
|
|
|
#define NETSTACK_RADIO_MAX_PAYLOAD_LEN 125
|
|
|
|
|
2019-01-09 14:53:26 +00:00
|
|
|
/* Platform-specific (H/W) AES implementation */
|
|
|
|
#ifndef AES_128_CONF
|
|
|
|
#define AES_128_CONF cc26xx_aes_128_driver
|
|
|
|
#endif /* AES_128_CONF */
|
|
|
|
|
2017-12-03 00:46:24 +00:00
|
|
|
/** @} */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
|
|
* \name IEEE address configuration
|
|
|
|
*
|
|
|
|
* Used to generate our link-local & IPv6 address
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
/**
|
|
|
|
* \brief Location of the IEEE address
|
|
|
|
* 0 => Read from InfoPage,
|
|
|
|
* 1 => Use a hardcoded address, configured by IEEE_ADDR_CONF_ADDRESS
|
|
|
|
*/
|
|
|
|
#ifndef IEEE_ADDR_CONF_HARDCODED
|
|
|
|
#define IEEE_ADDR_CONF_HARDCODED 0
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/**
|
|
|
|
* \brief The hardcoded IEEE address to be used when IEEE_ADDR_CONF_HARDCODED
|
|
|
|
* is defined as 1
|
|
|
|
*/
|
|
|
|
#ifndef IEEE_ADDR_CONF_ADDRESS
|
|
|
|
#define IEEE_ADDR_CONF_ADDRESS { 0x00, 0x12, 0x4B, 0x00, 0x89, 0xAB, 0xCD, 0xEF }
|
|
|
|
#endif
|
|
|
|
/** @} */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
|
|
* \name RF configuration
|
|
|
|
*
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
/* RF Config */
|
|
|
|
|
|
|
|
#ifndef IEEE_MODE_CONF_AUTOACK
|
|
|
|
#define IEEE_MODE_CONF_AUTOACK 1 /**< RF H/W generates ACKs */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef IEEE_MODE_CONF_PROMISCOUS
|
|
|
|
#define IEEE_MODE_CONF_PROMISCOUS 0 /**< 1 to enable promiscous mode */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef RF_BLE_CONF_ENABLED
|
|
|
|
#define RF_BLE_CONF_ENABLED 0 /**< 0 to disable BLE support */
|
|
|
|
#endif
|
|
|
|
/** @} */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
|
|
* \name Character I/O Configuration
|
|
|
|
*
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
#ifndef CC26XX_UART_CONF_ENABLE
|
|
|
|
#define CC26XX_UART_CONF_ENABLE 1 /**< Enable/Disable UART I/O */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef CC26XX_UART_CONF_BAUD_RATE
|
|
|
|
#define CC26XX_UART_CONF_BAUD_RATE 115200 /**< Default UART0 baud rate */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Enable I/O over the Debugger Devpack - Only relevant for the SensorTag */
|
|
|
|
#ifndef BOARD_CONF_DEBUGGER_DEVPACK
|
|
|
|
#define BOARD_CONF_DEBUGGER_DEVPACK 1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef SLIP_ARCH_CONF_ENABLED
|
|
|
|
/*
|
|
|
|
* Determine whether we need SLIP
|
|
|
|
* This will keep working while UIP_FALLBACK_INTERFACE and CMD_CONF_OUTPUT
|
|
|
|
* keep using SLIP
|
|
|
|
*/
|
|
|
|
#if defined(UIP_FALLBACK_INTERFACE) || defined(CMD_CONF_OUTPUT)
|
|
|
|
#define SLIP_ARCH_CONF_ENABLED 1
|
|
|
|
#endif
|
|
|
|
#endif
|
|
|
|
/** @} */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
|
|
* \name JTAG interface configuration
|
|
|
|
*
|
|
|
|
* Enable/Disable the JTAG DAP and TAP interfaces on the chip.
|
|
|
|
* Setting this to 0 will disable access to the debug interface
|
|
|
|
* to secure deployed images.
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
#ifndef CCXXWARE_CONF_JTAG_INTERFACE_ENABLE
|
|
|
|
#define CCXXWARE_CONF_JTAG_INTERFACE_ENABLE 1
|
|
|
|
#endif
|
|
|
|
/** @} */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
|
|
* \name ROM Bootloader configuration
|
|
|
|
*
|
|
|
|
* Enable/Disable the ROM bootloader in your image, if the board supports it.
|
|
|
|
* Look in board.h to choose the DIO and corresponding level that will cause
|
|
|
|
* the chip to enter bootloader mode.
|
|
|
|
* @{
|
|
|
|
*/
|
2018-08-16 21:01:48 +00:00
|
|
|
|
|
|
|
/* Backward compatibility */
|
|
|
|
#ifdef ROM_BOOTLOADER_ENABLE
|
|
|
|
#define CCXXWARE_CONF_ROM_BOOTLOADER_ENABLE ROM_BOOTLOADER_ENABLE
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef CCXXWARE_CONF_ROM_BOOTLOADER_ENABLE
|
|
|
|
#define CCXXWARE_CONF_ROM_BOOTLOADER_ENABLE 1
|
2017-12-03 00:46:24 +00:00
|
|
|
#endif
|
|
|
|
/** @} */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
#endif /* CC13XX_CC26XX_CONF_H_ */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/** @} */
|