nvt-se
1a9e00ab78
Purge neighbors that go over a configurable ETX limit. Increase the no-ACK penalty.
2010-03-17 15:08:46 +00:00
nvt-se
4e0ceedc47
Enabled external neighbor removal
2010-03-17 15:00:52 +00:00
fros4943
55f780ec19
removed debugging output
2010-03-17 14:36:46 +00:00
joxe
4f27fcf766
added ipaddr variable if not UIP_ROUTER is defined
2010-03-17 12:30:25 +00:00
joxe
e8916fe01f
added hooks for adding an external header compressor
2010-03-17 12:08:59 +00:00
joxe
d113577a8e
made UIP_ND6_SEND_RA configurable from platforms and projects
2010-03-16 18:27:22 +00:00
adamdunkels
36b995cc9a
Reenabled announcement support
2010-03-16 18:12:34 +00:00
adamdunkels
9be1a65211
Don't set the RELIABLE flag on incoming packets with the ack requested flag set, since it is set on most packets even if they aren't reliable
2010-03-16 18:11:58 +00:00
adamdunkels
b1feac5a00
Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100%
2010-03-16 18:11:13 +00:00
nifi
6b7ec2d002
removed uip_router
2010-03-16 15:45:20 +00:00
nifi
75091661e6
fixed typo
2010-03-16 15:41:00 +00:00
joxe
b4adc6bcb5
added fallback interface and removed uip_router
2010-03-16 15:35:03 +00:00
joxe
2b44f809fb
added support for extending route entries
2010-03-16 14:11:46 +00:00
joxe
453cf7f2e6
refactoring of hc06 code
2010-03-16 10:21:04 +00:00
nvt-se
7f687b99e6
Debug off by default
2010-03-15 19:22:29 +00:00
joxe
fd3d6c44d0
integration of new uip6 code from Mathilde and Julien - adds routing and improved interface handling
2010-03-15 16:41:24 +00:00
adamdunkels
a9bad71fbd
Increased the number of bits that repressent the MAX_RETRANSMITS attribute to allow for more than 7 hop-by-hop retransmissions
2010-03-14 23:01:12 +00:00
adamdunkels
7bab9316da
Two major changes:
...
* Low-power streaming. Experimental support for a low-power mode which
allows rapid exchange of packets with a 16% duty cycle. Does not
seem to function correctly yet though.
* Phase locking. When the phase of a neighbor has been detected, the
sender assumes that the neighbor will keeps it phase and does not
send more strobes than necessary to hit the receiver's channel
check - even if the receiver does not acknowledge the reception of
the strobes when it should have been awake. Instead, the sender
stops strobing and tries again at a later time.
2010-03-14 22:59:23 +00:00
oliverschmidt
def540e6c0
Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments.
...
There were btw other even longer lines with expansions of the same macro already present.
2010-03-14 12:13:54 +00:00
joxe
e8bd53cfd8
added typedef of icmp6_error
2010-03-13 09:25:24 +00:00
dak664
0236c6e725
Leave compiler warning for 16 bit timers
2010-03-12 17:51:07 +00:00
joxe
4c2daf9886
started integration of Mathildes and Juliens new uip6 code + made some ND timers configurable
2010-03-12 16:19:19 +00:00
dak664
7c5eed6bda
Add includes needed by AVR-gcc, fix compiler warning
2010-03-12 15:23:57 +00:00
dak664
52c9f4bde3
Remove compiler warning
2010-03-12 15:21:14 +00:00
nifi
2cf0fb9cce
Changed to use short address mode with short rime addresses
2010-03-12 14:49:21 +00:00
nvt-se
6be0bac1a1
minor include fix + added documentation
2010-03-12 13:40:13 +00:00
nvt-se
881fac7f50
fixed comment
2010-03-12 13:25:14 +00:00
nvt-se
6ce15b14c9
prepend net/ to include paths
2010-03-12 13:23:50 +00:00
nvt-se
c316fc2fa9
Make it possible to provide feedback to the neighbor modules
2010-03-12 13:20:13 +00:00
nvt-se
814dd8bf59
Added generic modules for neighbor information.
2010-03-12 13:19:45 +00:00
joxe
d75ec2da53
fixed so that uip6 sends icmp6 errors from correct source when acting as router - improves support for tracert, etc.
2010-03-11 18:07:37 +00:00
adamdunkels
90bb63a383
Set the (correct) packet attribute to let the MAC layer perform retransmissions
2010-03-09 20:40:50 +00:00
adamdunkels
4b60301727
Don't set the ack flag for broadcast packets
2010-03-09 20:40:11 +00:00
adamdunkels
17f6b3a324
Simplified the structure of the code
2010-03-09 20:38:55 +00:00
adamdunkels
d0e6436a20
Don't call up the netstack if the transmission was deferred
2010-03-09 20:37:02 +00:00
c_oflynn
dc3e6c1877
Fix TC/FL errors in hc-06. Need to verify further
2010-03-09 16:19:44 +00:00
joxe
48a9bff889
added support for dropping packets if hop limit is reached
2010-03-09 15:50:15 +00:00
c_oflynn
1d483a5da4
Fix UDP compression to work per hc-06. More commits to come to fix Traffic Class stuff...
2010-03-09 15:18:03 +00:00
adamdunkels
edda6dd86c
Minor bugfix: don't subtract collisions and deferrals from the number of transmissions
2010-03-09 13:23:58 +00:00
adamdunkels
5a6fc2ade0
Bugfix: set up rtmetric before starting to announce it. Set the number of MAC layer retransmissions correctly
2010-03-09 13:21:28 +00:00
adamdunkels
2c3d3e3d73
Bugfix: handle deferred transmissions correctly (don't count them)
2010-03-09 13:20:08 +00:00
adamdunkels
79722b4247
Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better
2010-03-09 13:19:05 +00:00
nvt-se
96eb20d235
forward arguments even if REXMIT is not set
2010-03-04 14:17:43 +00:00
dak664
c65e09ceb2
Remove compiler warnings
2010-03-02 15:41:23 +00:00
nifi
5e43a6998b
Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support.
2010-03-01 13:30:21 +00:00
nifi
0c084b8c68
added random init of sequence number
2010-03-01 13:17:01 +00:00
adamdunkels
524625dfd2
Removed debug string names of packet attribtues
2010-02-28 20:20:19 +00:00
adamdunkels
410d860a93
Improved handling of neighbor phase estimation: instead of busy-waiting while waiting for neighbor's phase, the new code schedules a timer just before neighbor wakes up
2010-02-28 20:19:47 +00:00
adamdunkels
e6fceb7200
Added MAC-layer return value to indicate that a packet transmission was deferred
2010-02-28 20:18:30 +00:00
adamdunkels
ec928a2a19
Make max queueing time depend on retransmission timeout
2010-02-28 14:15:58 +00:00
adamdunkels
e06acc4525
Prod the watchdog if waiting for along time
2010-02-28 14:15:16 +00:00
adamdunkels
74da90a06b
Don't count collisions as transmissions
2010-02-28 10:07:17 +00:00
adamdunkels
f95a6cce85
Added function for obtaining packet queue length
2010-02-28 09:20:32 +00:00
adamdunkels
8fe15f7b45
New packet attribute for specifiying MAC layer retransmissions; reorder and commented packet attributes
2010-02-28 09:19:43 +00:00
adamdunkels
970a9eb9c7
Increased neighbor lifetime to allow for longer neighbor announcement intervals
2010-02-28 09:19:04 +00:00
adamdunkels
7165a3866f
Significant rework of the Contiki data collection protocol:
...
* the new version makes use of MAC-layer feedback so that bad paths
can be identified quicker and then avoided.
* the new code uses transport layer ACKs that contain feedback from
the collect protocol: when a packet cannot be forwarded due to lack
of resources, the ACK contains a flag that indicates that the packet
could not be forwarded. ACKs also contain the routing metric of the
sender, which improves agility in face of rapid path changes.
* loop detection and management has been improved: with higher path
metric agility, the system is more prone to short-lived routing
loops. Instead of dropping looping packets, the new version adjusts
the routing metric for the routes that exhibit loops so that the
risk for future loops is reduced.
* make use of packet attributes to inform the MAC layer of how many
times packets should be retransmitted.
2010-02-28 09:18:01 +00:00
adamdunkels
b6b4941871
Made the number of MAC-layer retransmissions configurable on a per-packet basis, via a packet attribute
2010-02-28 08:35:16 +00:00
adamdunkels
ed88f487c8
Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive
2010-02-28 08:33:21 +00:00
adamdunkels
fa1a96636e
Bugfix: the compile-time check for UIP_LLADDR_LEN previously generated a run-time error, when it should have generated a compile-time error
2010-02-28 08:30:39 +00:00
adamdunkels
ba0e50a7b7
Set the default number of MAC layer retransmissions for IPv6 packets to 2
2010-02-28 08:29:42 +00:00
joxe
0ab2bc9a31
upgraded sicslowpan to hc-06 - no 48 bit multicast compression support yet
2010-02-25 15:50:58 +00:00
nifi
b50d47fb80
added missing function in sicslowmac_driver
2010-02-23 22:45:11 +00:00
nifi
1cfcc8a73a
Removed the combined name of CSMA and NETSTACK_RDC. The name of NETSTACK_RDC can be accessed separately if needed.
2010-02-23 20:42:45 +00:00
nifi
c20047f657
Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration.
2010-02-23 20:09:11 +00:00
adamdunkels
bb62749de7
Made debug printfs optional
2010-02-23 18:49:58 +00:00
adamdunkels
0ab2ba433f
Bugfix: the wrong callback pointer was passed to higher layers.
2010-02-23 18:49:45 +00:00
adamdunkels
ed52586e18
Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions.
2010-02-23 18:49:05 +00:00
adamdunkels
ca0417a923
Added the MAC layer callback functionality so that the Rime network layer gets information from the MAC about the status of sent packets: were they successfully transmitted, or was there a collisions? How many retries were there?
2010-02-23 18:38:05 +00:00
adamdunkels
f10eedab3e
Added debug printout
2010-02-23 18:37:15 +00:00
adamdunkels
2d13fecea7
Improved backoff management: timer is now doubled on every transmission, until the using module calls the neighbor_discovery_start() function again. Don't cancel the transmission even if a lower value arrives (this fixes a problem with multi-hop ETX propagaion).
2010-02-23 18:36:50 +00:00
adamdunkels
0eade2886c
Better loop handling: when a loop is detected, the neighbor to which the packet was originally sent gets an inflated ETX; made sure that collect without announcments work; increased timeouts, to work nicer in larger networks
2010-02-23 18:35:23 +00:00
adamdunkels
a4d9d6651b
Added the option to specify the old value to observers so that they can determine if the announcement should be sent out quicklier than otherwise
2010-02-23 18:32:44 +00:00
adamdunkels
b746b7fc06
Reworked the Rime/Chameleon interface so that packets now always hit Rime before Chameleon. Chameleon is now only called by Rime. This makes packet sniffing easier, and allows for sniffing packets after their header has been processed by Chameleon, thereby making per-packet power profiling much easier to implement
2010-02-23 18:29:53 +00:00
adamdunkels
d8cce42d28
Set the default radio driver to nullradio
2010-02-23 18:28:04 +00:00
adamdunkels
0b2b7bcdba
Removed inadvertedly left-over include file
2010-02-18 23:52:34 +00:00
adamdunkels
5cf3b83733
Common initialization code for the netstack
2010-02-18 23:15:26 +00:00
adamdunkels
f49ebfe1c4
Temporarily disabled rime route udp because it breaks with newest MAC interfaces
2010-02-18 21:53:08 +00:00
adamdunkels
e34eb54960
A work-in-progress rework of the Contiki MAC and radio layers. The
...
main ideas are:
* Separates the Contiki low-layer network stack into four layers:
network (e.g. sicslowpan / rime), Medium Access Control MAC
(e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
that specify what mechanism/protocol/driver to use at the four
layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
the fate of a transmitted packet: if the packet was not possible to
transmit, the cause of the failure is reported, and if the packets
was successfully transmitted, the number of tries before it was
finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
efficient radio duty cycling protocols: channel check, pending
packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
#defines.
2010-02-18 21:48:39 +00:00
adamdunkels
f8c804e28b
ntikiMAC: a new radio duty cycling mechanism that uses a combination
...
of link-layer and MAC-layer mechanisms to achieve a very low power
consumption: during idle listening the radio is switched off between
99.2% and 99.6% of the time. One unicast transmission typically adds
between 0.07% and 1.2% additional radio time, depending on packet
size.
ContikiMAC uses the standard IEEE 802.15.4 message format and adds no
additional headers.
ContikiMAC is simple: it uses periodic two-shot channel sampling
during idle listening to keep the radio on-time down. Transmissions
are done with repeated transmissions until a link-layer ACK is
received.
2010-02-18 21:26:15 +00:00
adamdunkels
f5c48751b5
Reworked 802.15.4 header creation and parsing so that it works regardless of the size of the rimeaddr_t typedef
2010-02-18 21:00:28 +00:00
adamdunkels
2fbf21b2b3
Refactored the phase optimization functionality into a separate module
2010-02-18 20:58:59 +00:00
adamdunkels
515a391ee4
Removed left-over debug printfs
2010-02-15 23:31:05 +00:00
dak664
bb9afb4fb1
Remove compiler warning
2010-02-15 20:49:38 +00:00
adamdunkels
4bb0375251
Buffer name definition bugfix
2010-02-15 19:23:54 +00:00
adamdunkels
9bb149ca13
Bugfix by Raimondas Sasnauskas: TCP SYN duplicate receptions in the SYN_RCVD state was not correctly handled
2010-02-15 18:03:07 +00:00
adamdunkels
d67d1f7340
Major bugfix, found by Raimondas Sasnauskas: the TCP periodic timer was not started when a new connection request arrived. If there were no other active TCP connections, this means that the SYNACK would never be retransmitted, potentially leading to a forever stale TCP connection.
2010-02-09 12:58:53 +00:00
adamdunkels
4a522c96dd
Added debugging statements for packet drops
2010-02-08 21:59:49 +00:00
adamdunkels
2b6a651233
Added missing include, made debug statement more explicit
2010-02-08 21:59:21 +00:00
adamdunkels
2eba08e8f6
Made queuebuf statistics configurable, and off by default
2010-02-08 21:10:32 +00:00
adamdunkels
b98f7d891f
Bugfix: added missing queuebuf allocation
2010-02-06 20:50:24 +00:00
adamdunkels
671216c558
No need to clear the headers now that we explicitly save a queuebuf when sending fragments
2010-02-06 17:07:43 +00:00
adamdunkels
b6647b5630
Turns out that with cxmac, clearing the header after sending a packet is not enough to make fragmentation work. Instead, we allocate a queuebuf and restore the packet after from the queuebuf after sending it.
2010-02-06 09:42:49 +00:00
adamdunkels
494e692d0b
Bugfix: clear the header after sending a packet solves a problem with fragmentation; also prod the watchdog since fragment transmissions can take a long time with some low-power MAC protocol
2010-02-06 07:49:58 +00:00
adamdunkels
a68b4c40c4
Added a function to clear only the header part of the packetbuf
2010-02-06 07:48:52 +00:00
oliverschmidt
e88d209214
Adjusted process name to title case.
2010-02-05 19:13:05 +00:00
nifi
a1199721a6
Changed to use separate Contiki event type for ICMP6 notifications
2010-02-05 12:43:36 +00:00
oliverschmidt
5e66abda50
Initialize lastport in all cases it is defined.
2010-02-04 21:33:51 +00:00
adamdunkels
d8b0625e21
Bugfix: lastport must be defines both when UIP_ACTIVE_OPEN or UIP_UDP are defined (thanks Oliver!)
2010-02-04 21:14:45 +00:00
adamdunkels
7bcb106fa9
Disable the stream mode for TCP packets since it does not seem to work reliably with cxmac
2010-02-04 18:57:33 +00:00
adamdunkels
13f6673d04
Bugfix: drop incoming TCP and UDP packets where port numbers are zero
2010-02-04 11:17:42 +00:00
adamdunkels
d7b7b05d0e
Moved the neigbor_init() call to the collect module, since it is the only one that currently uses it
2010-02-03 20:38:33 +00:00
adamdunkels
75e1c0c8c7
Include contiki-conf.h to let the MAC channel check rate be configurable
2010-02-03 16:45:12 +00:00
adamdunkels
06d17c7e1c
Remove unused rtimer code
2010-02-03 16:44:43 +00:00
adamdunkels
4bffd277f5
Don't set the stream bit on outgoing TCP packets for now - it doesn't seem to play well with IPv6 and X-MAC
2010-02-03 16:44:19 +00:00
adamdunkels
36db5eb70b
Added debug printout
2010-02-03 01:18:24 +00:00
adamdunkels
e419eb3cc5
Retransmit packet if it didn't receive a MAC layer ack
2010-02-03 01:17:54 +00:00
adamdunkels
d68af249ec
Added a MAC layer return value that informs the caller that a packet did not receive a MAC layer acknowledgement
2010-02-03 01:17:32 +00:00
adamdunkels
4bc4f033e8
Increase the trickle resend interval for router advertisements
2010-02-03 01:13:17 +00:00
adamdunkels
181213124b
Added a configuration option for setting the MAC channel check rate (which must be a power of two). The configuration is independent of the MAC protocol.
2010-02-02 23:28:58 +00:00
adamdunkels
f66cd6d44e
Increased the forwarding queue to six packets to improve collection robustness
2010-02-02 21:44:05 +00:00
adamdunkels
901a128e7f
Reconfigured the timeouts to work better on top of a power-cycling radio mechanism
2010-02-02 21:12:29 +00:00
adamdunkels
28052c655f
Removed exit() calls that were unadvertedtly left in from testing
2010-02-02 21:10:38 +00:00
adamdunkels
0db31db624
Moved declarations to the start of each function
2010-02-02 21:09:06 +00:00
adamdunkels
fcf60e9260
Removed the csma_init declaration in the mac_driver struct since it isn't needed and it breaks sdcc
2010-02-02 20:45:58 +00:00
adamdunkels
cc2be0f111
Remove compiler warnings
2010-02-02 16:33:07 +00:00
adamdunkels
88c661b0c2
Rewrote the netif time code so that is avoids the use of floating point numbers; some code style fixes
2010-02-02 16:32:03 +00:00
adamdunkels
1a13d25d33
Revised version of the X-MAC implementation that uses a ctimer instead
...
of an rtimer for the periodic radio duty cycling. The benefit of this
implementation is that it leaves an rtimer free for user tasks. The
drawback is a slightly higher idle power consumption. This new version
is based on the current rtimer-based X-MAC.
2010-01-31 18:44:23 +00:00
adamdunkels
e4168db633
Bugfix: deallocate queuebuf only if there was no collision
2010-01-31 13:55:36 +00:00
adamdunkels
388c5d4244
Made the sicslowpan MAC layer reachable from outside modules
2010-01-28 13:50:51 +00:00
adamdunkels
2ae7ed827c
Increase the default X-MAC channel check rate to 4 Hz instead of 2 Hz
2010-01-28 13:40:47 +00:00
adamdunkels
f94d6df6f0
Bugfix: copy the originator address from the packetbuf into a local variable to avoid it being overwritten
2010-01-27 08:12:56 +00:00
adamdunkels
8430dab039
Typecast to fix nightly build problem
2010-01-27 07:36:31 +00:00
adamdunkels
9e5823f060
Made retransmission timeout configurable
2010-01-26 10:19:26 +00:00
adamdunkels
b728c0927c
Made number of duplicate announcements configurable
2010-01-26 10:18:55 +00:00
adamdunkels
cc3f609eaa
Bugfix for alignment issue. Added mechanism that allows five duplicate announcements before suppressing one's own.
2010-01-25 13:55:17 +00:00
adamdunkels
71ffde578e
Moved route_init() into mesh instead of the generic rime initialiation
2010-01-25 13:54:26 +00:00
adamdunkels
423e37f426
Added parameter to ipolite that specifies how many dups that are acceptable, before suppressing one's own packet
2010-01-25 13:54:06 +00:00
adamdunkels
0b58ca3b22
Bugfix: split full size TCP segments if they match the MSS definition, not only the buffer size definition
2010-01-25 13:53:15 +00:00
adamdunkels
7615a6cf47
Bugfix by Henrik Mäkitaavola: check that ICMP6 process is defined before invoking it
2010-01-25 13:37:05 +00:00
adamdunkels
4f3e8d565c
Added a simple CSMA (Carrier Sense Multiple Access) mechanism that
...
works on top of an underlying duty cycling mechanism. The CSMA layer
retransmits packets that could not be sent because of a collision was
detected.
2010-01-25 11:46:44 +00:00
adamdunkels
7ad93e5d18
Added a field to the struct mac interface:
...
channel_check_interval(). This function returns the interval by which
the duty cycling mechanism checks the radio channel for activity. It
is used by higher layer mechanisms to determine suitable timeouts for
retransmissions.
2010-01-25 11:43:32 +00:00
fros4943
26e0bab11a
bugfix: alignment problem caused by previous bugfix
2010-01-21 11:39:35 +00:00
fros4943
3db4f36c3e
removed compiler specific attribute
2010-01-20 09:58:16 +00:00
adamdunkels
c962f49516
Alignment bugfix
2010-01-18 21:27:21 +00:00
adamdunkels
743e93e650
Do not remove encounters - there is no need to, as they are only an optimization
2010-01-14 20:14:03 +00:00
nvt-se
a03e899c27
Signal the result of transmissions attempts made in the mesh module. Patch from Moritz Struebe
2009-12-18 14:57:15 +00:00
nifi
7b2b93e6e6
clear transmission flag if send failed
2009-12-18 14:49:42 +00:00
adamdunkels
f4e6758b22
Use RTIMER_NOW() instead of rtimer_arch_now()
2009-12-09 18:08:26 +00:00
adamdunkels
2f105e933a
Variable xmac_is_on was used both in interrupt and non-interrupt contexts and needs to be volatile
2009-12-06 23:29:38 +00:00
adamdunkels
53457eb1f0
Fixed compilation warning
2009-12-06 17:10:54 +00:00
adamdunkels
8bcc838d8a
Bugfix: don't set the 'we are sending' flag until we are actually sending
2009-12-06 17:05:45 +00:00
adamdunkels
6897270289
Bugfix to the Contiki LPP encounter timing code: encounters are now
...
properly timed.
2009-12-06 13:18:32 +00:00
adamdunkels
822149f943
Significant improvements to the Contiki X-MAC:
...
* the code is simplified, particularly the duty cycling logic
* old unused code has been removed
* Contiki X-MAC now listens before sending a strobe to avoid MAC-level
collisions
* broadcasts are sent directly, without strobes, reducing the power
consumption of receivers
* turn off radio for 1 ms between sending a strobe and expecting the
strobe ack
2009-12-06 13:16:59 +00:00
adamdunkels
cef2e65c9b
Added an error type for signalling a MAC-layer collision
2009-12-05 21:49:51 +00:00
adamdunkels
4a1a823a49
Code style fix
2009-12-05 13:29:41 +00:00
fros4943
a1b4597b95
fixed announcement compilation error
2009-11-27 14:27:50 +00:00
adamdunkels
aeefa75304
Fixed alignment problems in announcement packet creation
2009-11-27 12:49:27 +00:00
nvt-se
116771adbc
made the route cache timeout configurable
2009-11-20 14:35:58 +00:00
nifi
1f2c226d8e
* Added ctimer_restart(). Patch by Moritz Struebe.
...
* Added ctimer_expired().
2009-11-19 18:32:05 +00:00
nifi
bb0ffe0478
moved rime initialization into rime router so it is easier to switch IPv6 routing module
2009-11-18 13:51:55 +00:00
fros4943
0034fd7bca
generic return values for sent packet
2009-11-13 10:09:02 +00:00
fros4943
9b20f11cd8
chameleon returns 1 only on successful rime_output()
2009-11-13 09:14:52 +00:00
fros4943
583dd11c55
rime_output() now returns RIME_OK or RIME_ERR depending on the MAC return value.
...
this patch may affect Rime sniffers running on top of MAC protocols that do not yet return generic MAC return values
2009-11-13 09:10:24 +00:00
fros4943
26bb5ecd21
added radio and MAC generic return values to allow applications finding out whether the packet was transmitted
2009-11-13 08:59:22 +00:00
joxe
5b0b36c39e
accept messages to all routers if UIP_CONF_ROUTER is set.
2009-11-12 14:05:42 +00:00
adamdunkels
60a3fc0cae
Fixed alignment issue
2009-11-09 08:22:40 +00:00
adamdunkels
56218aba3b
Made rimeaddr_t pointers const where they should be.
2009-11-08 19:40:16 +00:00
adamdunkels
70fc23ac7e
Enable stream mode by default, remove LED debug mode
2009-11-04 16:02:45 +00:00
adamdunkels
5aab2eb77d
A simple addition with significant performance implications:
...
sicslowpan tags TCP packets with the PACKETBUF_ATTR_PACKET_TYPE_STREAM
flag, which makes the underlying power-saving MAC layer keep the radio
on for some time after transmitting the packet. This allows reply
packets to be processed directly, significantly increasing TCP latency
and throughput.
2009-11-02 11:58:56 +00:00
adamdunkels
c7a91ad4a2
Bugfix: UIP_TCP_BUF -> BUF
2009-10-27 23:09:58 +00:00
adamdunkels
631af06c7c
Bugfix: Active TCP connections in uIP are made by first setting up the
...
TCP connection state, then poll uIP to send out the first SYN. Until
now, however, the SYN was not sent as part of the poll, but at the
first retransmission. This is now fixed.
2009-10-27 22:34:08 +00:00
zhitao
1913e1a936
prevent neighbor ETX from wrap-over
2009-10-22 13:11:20 +00:00
nifi
df32fde58c
Made max number of neighbors configurable
2009-10-21 21:25:10 +00:00
adamdunkels
91579fbaab
Removed debug strings to save ROM
2009-10-20 08:06:43 +00:00
nifi
223fa1c8e5
added missing include
2009-10-20 07:42:03 +00:00
adamdunkels
a5ea7ef966
Increased default number of queue buffers
2009-10-19 21:28:59 +00:00
adamdunkels
4d9b05c2ce
Increased default header size in packetbuf to accomodate 802.15.4 headers
2009-10-19 21:28:11 +00:00
adamdunkels
7cdfbca973
Alignment problems with announcements fixed
2009-10-19 21:27:02 +00:00
adamdunkels
9ec57d61ad
Added MAC layer framing support to X-MAC so that packets now are standard 802.15.4 frames
2009-10-19 20:53:56 +00:00
adamdunkels
4de1816e36
Added a new module called "framer" that creates MAC level frames to
...
the packetbuf from packet attributes. Two framer modules are included,
one that creates 802.15.4 frame headers, and one that creates a
minimal "nullmac"-style header that only contains the link-local
addresses.
2009-10-19 18:30:03 +00:00
nifi
ae226c5917
* Set sender and receiver packet attributes on incoming packets
...
* Added link layer destination check
2009-10-19 11:25:54 +00:00
adamdunkels
10c873018d
Ensure that DEFAULT_PERIOD is != 0, to avoid a modulo with 0
2009-10-19 06:39:29 +00:00
adamdunkels
f25856a387
Hack to be able to receive UDPv4 multicast packets
2009-10-18 22:03:44 +00:00
adamdunkels
fb037e0afb
Added function for sending an UDP packet to a specified IP address and port number over an existing UDP connection
2009-10-18 22:02:01 +00:00
adamdunkels
9d26bd663e
A new optimization to X-MAC: senders now keep track of when neighbors
...
last were known to be awake. When sending a packet, a sender does not
start to send strobes until the neighbor is expected to be awake. This
reduces power consumption for senders and decreases the contention in
the network as there are less packets in the air. Additionally, the
ACK optimization was improved so that data/ack exchanges now are
more efficient.
2009-10-18 13:19:25 +00:00
nvt-se
31f41d842e
* decline route discovery requests if we have one in the air
...
* and, by popular demand, switched PRINTF to printf in the debug macro. :-)
2009-10-08 16:30:26 +00:00
nvt-se
f143227205
made the route discovery packet timeout configurable.
2009-09-29 16:02:28 +00:00
nifi
0ad51b8dcc
Moved the link layer destination check to sicslowmac
2009-09-18 16:37:17 +00:00
adamdunkels
1980253ba3
Refresh routes when hearing a packet from a neighbor
2009-09-09 21:10:21 +00:00
adamdunkels
786ed3cf84
Fixed sdcc compiler problem: function pointers cannot be NULL, so added a dummy function instead
2009-09-09 21:09:42 +00:00
adamdunkels
2181e90f69
Added the possibility to switch lpp off. Fixed sdcc compiler issue
2009-09-09 21:09:23 +00:00
adamdunkels
1cafbc6002
sdcc compiler issue fix: compound assignments are not supported, so we use memcpy() instead
2009-09-09 21:08:46 +00:00
nvt-se
4d21a3e203
Don't assume that radio->send turns on the radio automatically.
2009-09-04 10:59:30 +00:00
oliverschmidt
e60db62b10
Added prototype missing for quite some time now - do we need -Werror ?
2009-08-20 20:27:17 +00:00
adamdunkels
522f991f14
Set sender and receiver packet attributes on incoming packets: patch by Gidon Ernst
2009-08-20 18:59:17 +00:00
dak664
c1b7375a5a
*** empty log message ***
2009-07-23 16:13:48 +00:00
dak664
2166261890
Separate input and output debug PRINTFs
2009-07-10 13:33:45 +00:00
nvt-se
38fff1b527
mac_driver structure has been changed to include the init function.
2009-06-24 16:31:49 +00:00
nifi
912aba7280
added init function in MAC driver for easier configuration
2009-06-22 11:14:11 +00:00
nvt-se
33909cc2fd
made neighbor discovery method configurable. default is announcements.
2009-05-30 19:54:05 +00:00
nvt-se
83f2b9ae57
include ctimer.h, since ctimer's are used in the neighbor_discovery_conn struct.
2009-05-30 19:40:39 +00:00
nvt-se
9277f922f1
fixed some documentation typos.
...
also uc -> unicast, stuc -> stunicast.
2009-05-26 13:58:53 +00:00
nifi
f39d2bd4c6
Fixed link panid for broadcasts to be standard compliant. Ignore packets addressed to other non-broadcast panids.
2009-05-26 12:08:29 +00:00
nvt-se
e2bbdbca9b
decrement TTL right after forwarding check.
2009-05-19 11:54:50 +00:00
adamdunkels
5308a09dd3
Added debug output
2009-05-10 21:10:23 +00:00
adamdunkels
02734c9806
Bugfix: must copy the sender and receiver addresses from the packetbuf buffer, otherwise an application program may overwrite them
2009-05-10 21:10:02 +00:00
adamdunkels
fe5a1f1068
Added an optimization option that avoids multiple simultaneous broadcasts from neighbors: when a broadcast is to be sent, a sender does not send until it knows that no other nodes are broadcasting.
2009-05-10 21:09:05 +00:00
adamdunkels
fe30886b37
Added functionality for decaying routes: when a packet is sent over a route, it is decayed. If the route is not refreshed within four packets (with the route_refresh() function, which is called when a new packet arrives), the route is dropped. A route can be decayed at most once per second
2009-05-10 21:08:01 +00:00
adamdunkels
6bf8e0b478
Bugfix by Takahide Matsutsuka: too few items in array, which caused problems with sdcc
2009-05-08 08:52:55 +00:00
zhitao
48d4800f08
removed reference to undefined function in mspgcc
2009-05-06 15:34:28 +00:00