2545fd9069
Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit)
2009-04-10 00:40:08 +00:00
3415ff26bd
Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS
2009-04-10 00:39:19 +00:00
172ffb74c7
fix compiler warnings. patch from Jesper Karlsson.
2009-04-08 14:56:00 +00:00
b41b79e3a9
Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets).
2009-04-06 17:18:20 +00:00
900d8d8e17
changed to use HC01 compression for uip6
2009-04-06 16:01:11 +00:00
8b41f3a6a8
set rime addr size to 8 for uip6, restored clock resolution
2009-04-06 14:59:49 +00:00
76b7bf43d0
added setup for uip6 with 802.15.4 frames and routing using Rime
2009-04-06 14:12:58 +00:00
a36e529df1
added configuration for panid
2009-04-06 13:31:00 +00:00
f53560f6a5
enabled multihop routing, increased uip buffer size.
2009-04-06 13:23:14 +00:00
c1d490b6a7
added workaround for memcpy/memset bug in mspgcc
2009-04-06 13:07:37 +00:00
58331e6802
Made tick resultion more fine-grained to support a shorter LPP listen time
2009-04-03 11:46:48 +00:00
b730fb329d
changed upload rules due to problems on linux platforms
2009-04-02 11:15:30 +00:00
3b3580e439
disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki
2009-04-01 18:11:48 +00:00
aa736322e1
removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead
2009-04-01 17:17:55 +00:00
3665422d8d
simplified cooja communication stacks initialization + added uipv6 stack
2009-04-01 13:50:12 +00:00
6a99a82516
copied uipv6 configuration from native platform
2009-04-01 13:46:56 +00:00
1c031504e5
no need to initialize serial line
2009-04-01 13:46:16 +00:00
892bfb5678
moved radio-uip link functionality directly to comm stack sources
2009-04-01 13:45:41 +00:00
eddd8350c5
renamed radio driver
2009-04-01 13:44:34 +00:00
afed9bb2d0
icnlude packet radio by default
2009-04-01 13:39:54 +00:00
c6b15c289e
* show radio channel at startup
...
* only initialize timesynch when timesynch is enabled
2009-03-31 13:25:50 +00:00
e90149b7b4
avoid switching mode when tx or rx is active.
...
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
5f1fda0406
removed unused variables + writing serial data in timeevent
2009-03-26 16:23:47 +00:00
dda6de8438
+ clock stub functions
2009-03-26 16:22:36 +00:00
ac22ad5081
changed the Makefile rules for uploading to sky-nodes.
...
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
2009-03-26 13:29:44 +00:00
04bd414e1c
enabled LPP by default.
2009-03-26 12:51:55 +00:00
90b9b9bae3
configure LPP parameters with slightly longer listen time since the CC1020
...
driver switches from TX mode to RX mode rather slowly.
decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
25cc327acc
avoid hanging in TX mode after CCA check failed.
...
minor memory savings.
2009-03-25 15:25:05 +00:00
96fbf3b853
use old style C comments.
...
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
2009-03-24 15:32:26 +00:00
15c447e57e
remove some unnecessary instructions and function calls. patch from Jesper Karlsson.
2009-03-24 15:13:11 +00:00
143c7f9cea
switched from serial to serial_line. patch from Jesper Karlsson.
2009-03-24 15:02:03 +00:00
c76f34ff98
minor serial test application update
2009-03-21 15:47:40 +00:00
9c9165dc90
start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations
2009-03-20 13:23:44 +00:00
6b22fa60e8
- avoid costly rx state initialization if the radio is already on.
...
- code formatting.
2009-03-19 14:43:31 +00:00
8f85355f02
print the MAC protocol name when starting the node
2009-03-19 14:14:06 +00:00
b9ef907690
enable serial line tools using the same commands as the sky platform's Makefile
2009-03-17 22:27:14 +00:00
7e329ab467
removed obsolete file.
2009-03-17 22:20:04 +00:00
b1cd9c207a
Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include
2009-03-17 21:51:13 +00:00
727c5a2dbe
Renamed serial module to serial-line
2009-03-17 20:32:22 +00:00
b20f0884ed
Renamed serial module to serial-line
2009-03-17 20:19:11 +00:00
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
7f3def31b7
removed duplicate inclusion of header, and sorted the entries.
2009-03-17 15:02:19 +00:00
6d0fc26ec1
disabled unstable SD driver.
2009-03-17 15:01:40 +00:00
d6ebba536c
minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4
2009-03-13 14:40:07 +00:00
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
932fc9f748
Remove tab that was preventing cgi invokation
2009-03-12 21:37:22 +00:00
5920a86312
Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps
2009-03-12 19:15:23 +00:00
99b9e80de9
make all quickstart target phony
2009-03-12 17:48:23 +00:00
72fdf5b379
make quickstart goal precious
2009-03-12 15:12:50 +00:00
063bf88f90
cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
...
+
cygwin path fix for quickstart
2009-03-12 13:04:10 +00:00
80bbc92ffe
patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
...
in the header.
2009-03-12 12:23:22 +00:00
5d27841807
+ contiki app object
2009-03-11 08:40:37 +00:00
bcb34297df
reimplemented quickstart functionality
2009-03-11 07:45:54 +00:00
0bc10750bc
added rule for .cooja target.
...
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
2009-03-10 21:23:38 +00:00
0395ff5f39
sicslowpan Typo
2009-03-09 08:19:07 +00:00
41c19115d2
fix compiling ravenusb platform
2009-03-06 15:21:45 +00:00
3848bba210
Added support for serial data input
2009-03-06 00:13:56 +00:00
8afff893f1
Removed old \mainpage documentation to avoid confusion with the main \mainpage
2009-03-02 22:04:14 +00:00
3774395c82
cfs example updated
2009-03-02 09:44:07 +00:00
286065b584
cfs updated
2009-03-02 09:34:47 +00:00
e3043b1be2
Enable communication power accounting for xmac by default
2009-03-01 20:43:37 +00:00
ac9ab9c582
#include lib/random.h
2009-03-01 20:42:10 +00:00
47d70f2ae3
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
2009-03-01 12:00:00 +00:00
b47221672a
switched cfs offset type to signed long to allow backward movements with cfs_seek.
2009-02-28 13:41:16 +00:00
9c8c4898f7
updating cooja cfs stubs according to recent commits
2009-02-27 16:06:25 +00:00
9f8f773b43
use unsigned long as cfs offset type.
2009-02-27 14:53:15 +00:00
03e7eb2535
Fixed comment (just to make sure that committing still works after all these months).
2009-02-27 07:57:13 +00:00
9b548619ed
removed redundant definitions.
2009-02-25 23:57:13 +00:00
d761dfebd1
Bugfix: reduced the size of the uIP buffer to account for MAC header space
2009-02-25 10:23:03 +00:00
c148e2e7ea
Do not include codeprop.h by default.
2009-02-23 14:44:26 +00:00
0db6403c5d
removed unnecessary reference to codeprop.h
2009-02-21 11:23:54 +00:00
7781bbea58
Enabled X-MAC announcements by default, disabled polite broadcast announcements by default
2009-02-14 22:52:24 +00:00
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
f1fc4c879f
cfs_coffee_get_fd_set() was renamed
2009-02-09 10:09:13 +00:00
d0a546b049
A long refactoring session yielded the following.
...
Technical changes:
* Factored out file specific information from the file descriptor
structure into a new file structure.
- Useful file metadata can be stored after the file is closed.
- File descriptors become much smaller.
- Significantly reduces the need to scan for the file end.
* Use correct types in all function signatures.
* Removed the directory cache.
Results:
* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
440899e4cb
Seed rand() with the node ID + MAC address
2009-02-07 16:49:36 +00:00
5cf0c25ca6
A few more minor fixes
2009-02-04 20:58:05 +00:00
96882c402a
Fixed conformance to Contiki code style :)
2009-02-04 20:55:41 +00:00
9689a579be
added DCO/CPU speed re-synch each 30 seconds
2009-02-04 19:32:20 +00:00
c16921f108
checkpointing library implemented for the sky platform (cfs interface is currently not optimized)
2009-02-04 17:51:49 +00:00
5789bf5596
Modified comments for receiver filter bandwidth settings
2009-02-02 08:52:49 +00:00
e5f0d786a8
fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted
2009-01-31 12:45:03 +00:00
603740b13b
removed compiler warning by returning 0 at undefined value
2009-01-23 17:08:17 +00:00
ebcaf8eec8
removed compilation warning due to unused is_gateway variable (outside uIP mode)
2009-01-19 13:44:04 +00:00
e70b45c102
Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists
2009-01-15 22:12:46 +00:00
29fe3d8741
Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board
2009-01-15 21:07:03 +00:00
9f0006fde0
Driver for the acceleromenter sensors on the JCreate board
2009-01-15 21:06:02 +00:00
5f3c1a0e12
elfloader executing loaded programs from ram (not rom) by default on msp430 platforms.
2009-01-15 09:04:04 +00:00
d2dc732435
changed list_pop to return removed element
2008-12-16 09:59:42 +00:00
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
a50d5b701e
direct the UART input stream to the default Contiki serial process
2008-12-09 15:56:39 +00:00
79d4d22ee7
replaced usage of 16-bit rimeaddr field.
2008-12-02 16:00:15 +00:00
0ab57730f8
removed reference to the removed u16 rime address field
2008-12-01 13:20:51 +00:00
9fb2c9d836
* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
...
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
6150d13254
support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson)
2008-11-28 16:41:26 +00:00
6b33cf434f
bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead
2008-11-25 16:05:22 +00:00
55280131fc
added printout of MAC protocol name
2008-11-24 14:31:08 +00:00
720357bc60
added log_message() implementation
2008-11-21 10:35:46 +00:00
8bae6890a8
Changes by "David Kopf" <dak664@embarqmail.com> to:
...
-Add hit counter to index.html
-Adding link to favicon.png
-Fix serving of binary (image) files in avr-makefsdata file
Changes by Colin O'Flynn:
-Removed extra linebreak in tutorial-raven.txt
-Fix to contiki-conf.h in avr-rcb platform
2008-11-18 22:03:12 +00:00
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
adamdunkels
nvt-se
nifi
fros4943
dak664
julienabeille
c_oflynn
oliverschmidt
joxe
zhitao