254 lines
8.7 KiB
Markdown
254 lines
8.7 KiB
Markdown
Contiki for nRF52 Development Kit
|
|
=================================
|
|
This guide's aim is to help you with using Contiki for
|
|
Nordic Semiconductor's nRF52 DK.
|
|
|
|
The port depends on Nordic Semiconductor IoT SDK for nRF52.
|
|
The IoT SDK contains source code and libraries which are
|
|
required for successfull port compilation. It also contains
|
|
SoftDevice binary driver which is required for BLE operation.
|
|
See prerequisites section for details on how to set up the SDK.
|
|
|
|
For more information about SoftDevice please refer to the SDK
|
|
docummentation [nRF52 Datasheet and SDK documentation].
|
|
|
|
This port supports DK versions PCA10040 and PCA10036.
|
|
|
|
Port Features
|
|
=============
|
|
The following features have been implemented:
|
|
* Support for IPv6 over BLE using Contiki 6LoWPAN implementation
|
|
* Contiki system clock and rtimers (using 32kHz and 1MHz timers)
|
|
* UART driver
|
|
* Watchdog driver
|
|
* Hardware RNG
|
|
* Temperature sensor driver
|
|
* DK LED driver
|
|
* DK Buttons driver
|
|
* Real Time Transfer (RTT) I/O support
|
|
|
|
Note that this port supports only IPv6 network stack.
|
|
|
|
The port is organized as follows:
|
|
* nRF52832 CPU and BLE drivers are located in `cpu/nrf52832` folder
|
|
* nRF52 Development Kit drivers are located in `platform/nrf52dk` folder
|
|
* Platform examples are located in `examples/nrf52dk` folder
|
|
|
|
Prerequisites and Setup
|
|
=======================
|
|
In order to compile for the nRF52 DK platform you'll need:
|
|
|
|
* nRF5 IOT SDK
|
|
https://developer.nordicsemi.com
|
|
|
|
Download nRF5 IOT SDK, extract it to a folder of your choice,
|
|
and point `NRF52_SDK_ROOT` environmental variable to it, e.g.,:
|
|
|
|
```
|
|
wget https://developer.nordicsemi.com/nRF5_IoT_SDK/nRF5_IoT_SDK_v0.9.x/nrf5_iot_sdk_3288530.zip
|
|
unzip nrf5_iot_sdk_3288530.zip -d /path/to/sdk
|
|
export NRF52_SDK_ROOT=/path/to/sdk
|
|
```
|
|
|
|
* An ARM compatible toolchain
|
|
The port has been tested with GNU Tools for ARM Embedded Processors
|
|
version 5.2.1.
|
|
|
|
For Ubuntu you can use package version provided by your distribution:
|
|
```
|
|
sudo apt-get install gcc-arm-none-eabi
|
|
```
|
|
|
|
Alternatively, install the toolchain from PPA to get the latest version
|
|
of the compiler: https://launchpad.net/~team-gcc-arm-embedded/+archive/ubuntu/ppa
|
|
|
|
For other systems please download and install toolchain available at
|
|
https://launchpad.net/gcc-arm-embedded
|
|
|
|
* GNU make
|
|
|
|
* Segger JLink Software for Linux
|
|
https://www.segger.com/jlink-software.html
|
|
|
|
This package contains tools necessary for programming and debugging nRF52 DK.
|
|
|
|
For Ubuntu you can download and install a .deb package. Alternatively download
|
|
tar.gz archive and extract it to a folder of your choice. In this case you
|
|
need to set `NRF52_JLINK_PATH` environmental variable to point to the
|
|
JLink tools location:
|
|
|
|
```
|
|
export NRF52_JLINK_PATH=/path/to/jlink/tools
|
|
```
|
|
|
|
To keep this variable set between sessions please add the above line to your
|
|
`rc.local` file.
|
|
|
|
In order to access the DK as a regular Linux user create a `99-jlink.rules`
|
|
file in your udev rules folder (e.g., `/etc/udev/rules.d/`) and add the
|
|
following line to it:
|
|
|
|
```
|
|
ATTRS{idProduct}=="1015", ATTRS{idVendor}=="1366", MODE="0666"
|
|
```
|
|
When installing from a deb package, the `99-jlink.rules` file is added
|
|
automatically to /etc/udev/rules.d folder. However, the syntax of the file
|
|
doesn't work on newer udev versions. To fix this problem edit this file and
|
|
replace ATTR keyword with ATTRS.
|
|
|
|
To fully use the platform a BLE enabled router device is needed. Please refer
|
|
to `Preqrequisites` section in `README-BLE-6LoWPAN.md` for details.
|
|
|
|
Getting Started
|
|
===============
|
|
Once all tools are installed it is recommended to start by compiling
|
|
and flashing `examples/hello-word` application. This allows to verify
|
|
that toolchain setup is correct.
|
|
|
|
To compile the example, go to `examples/hello-world` and execute:
|
|
|
|
make TARGET=nrf52dk
|
|
|
|
If you haven't used the device with Contiki before we advise to
|
|
erase the device and flash new SoftDevice:
|
|
|
|
make TARGET=nrf52dk erase
|
|
make TARGET=nrf52dk softdevice.flash
|
|
|
|
If the compilation is completed without errors flash the board:
|
|
|
|
make TARGET=nrf52dk hello-world.flash
|
|
|
|
The device will start BLE advertising as soon as initialized. By
|
|
default the device name is set to 'Contiki nRF52 DK'. To verify
|
|
that the device is advertising properly run:
|
|
|
|
sudo hcitool lescan
|
|
|
|
And observe if the device name appears in the output. Also, observe
|
|
if LED1 is blinking what indicates that device is waiting for a connection
|
|
from BLE master.
|
|
|
|
If device is functioning as expected you can test IPv6 connection
|
|
to the device. Please refer to `README-BLE-6LoWPAN.md` on details how to do
|
|
this.
|
|
|
|
Examples
|
|
========
|
|
Examples specific for nRF52 DK can be found in `examples/nrf52dk` folder. Please
|
|
refer to README.md in respective examples for detailed description.
|
|
|
|
The DK has also been tested with the `examples/hello-world` and `examples/webserver-ipv6`
|
|
generic examples.
|
|
|
|
Compilation Options
|
|
===================
|
|
The Contiki TARGET name for this port is `nrf52dk`, so in order to compile
|
|
an application you need to invoke GNU make as follows:
|
|
|
|
make TARGET=nrf52dk
|
|
|
|
In addition to this port supports the following variables which can be
|
|
set on the compilation command line:
|
|
|
|
* `NRF52_SDK_ROOT=<SDK PATH>`
|
|
This variable allows to specify a path to the nRF52 SDK which should
|
|
be used for the build.
|
|
|
|
* `NRF52_WITHOUT_SOFTDEVICE={0|1}`
|
|
Disables SoftDevice support if set to 1. By default, SoftDevice support
|
|
is used. Note that SoftDevice must be present (flashed) in the device
|
|
before you run an application that requires it's presence.
|
|
|
|
* `NRF52_USE_RTT={0|1}`
|
|
Enables RealTime Terminal I/O. See VCOM and RTT for details. By default,
|
|
RTT is disabled and IO is done using Virtual COM port.
|
|
|
|
* `NRF52_JLINK_SN=<serial number>`
|
|
Allows to choose a particular DK by its serial number (printed on the
|
|
label). This is useful if you have more than one DK connected to your
|
|
PC and whish to flash a particular device.
|
|
|
|
* `NRF52_DK_REVISION={pca10040|pca10036}`
|
|
Allows to specify DK revision. By default, pca10040 is used.
|
|
|
|
Compilation Targets
|
|
===================
|
|
Invoking make solely with the `TARGET` variable set will build all
|
|
applications in a given folder. A particular application can be built
|
|
by invoking make with its name as a compilation target:
|
|
|
|
make TARGET=nrf52dk hello-world
|
|
|
|
In order to flash the application binary to the device use `<application>.flash`
|
|
as make target, e.g.:
|
|
|
|
make TARGET=nrf52dk hello-world.flash
|
|
|
|
In addition, the SoftDevice binary can be flashed to the DK by invoking:
|
|
|
|
make TARGET=nrf52dk softdevice.flash
|
|
|
|
To remove all build results invoke:
|
|
|
|
make TARGET=nrf52dk clean
|
|
|
|
The device memory can be erased using:
|
|
|
|
make TARGET=nrf52dk erase
|
|
|
|
Note, that once the device is erased, the SoftDevice must be programmed again.
|
|
|
|
Virtual COM and Real Time Transfer
|
|
==================================
|
|
By default, the nRF52 DK uses a Virtual COM port to output logs. Once
|
|
the DK is plugged in a `/tty/ACM<n>` or `/ttyUSB<n>` device should appear in
|
|
your filesystem. A terminal emulator, such as picocom or minicom, can be
|
|
used to connect to the device. Default serial port speed is 38400 bps.
|
|
|
|
To connect to serial port using picocom invoke:
|
|
|
|
picocom -fh -b 38400 --imap lfcrlf /dev/ttyACM0
|
|
|
|
Note, that if you have not fixed file permissions for `/dev/ttyACM0`
|
|
according to section `Segger JLink Software for Linux` you'll need to use
|
|
root or sudo to open the port with `picocom`.
|
|
|
|
In addition to Virtual COM the port supports SEGGER's Real Time Transfer
|
|
for low overhead I/O support. This allows for outputting debugging information
|
|
at much higher rate with significantly lower overhead than regular I/O.
|
|
|
|
To compile an application with RTT rather that VCOM set `NRF52_USE_RTT` to 1 on
|
|
the compilation command line:
|
|
|
|
make TARGET=nrf52dk NRF52_USE_RTT=1 hello-world
|
|
|
|
You can then connect to the device terminal using `JLinkRTTClient`. Note that
|
|
a JLlink gdb or commander must be connected to the target for the RTT to work.
|
|
|
|
More details regarding RTT can be found at https://www.segger.com/jlink-rtt.html
|
|
|
|
Docummentation
|
|
==============
|
|
This port provides doxygen source code docummentation. To build the
|
|
docummentation please run:
|
|
|
|
sudo apt-get install doxygen
|
|
cd <CONTIKI_ROOT>\doc
|
|
make
|
|
|
|
Support
|
|
=======
|
|
This port is officially supported by Nordic Semiconductor. Please send bug
|
|
reports or/and suggestions to <wojciech.bober@nordicsemi.no>.
|
|
|
|
License
|
|
=======
|
|
All files in the port are under BSD license. nRF52 SDK and SoftDevice are
|
|
licensed on a separate terms.
|
|
|
|
Resources
|
|
=========
|
|
* nRF52 Datasheet and SDK documentation (http://infocenter.nordicsemi.com)
|
|
* nRF52 SDK Downloads (https://developer.nordicsemi.com/)
|
|
* JLink Tools (https://www.segger.com/) |