nes-proj/examples/hello-world/README.md

46 lines
1.2 KiB
Markdown

Hello-world
===========
This adds the hello-world process in hello-world.c to the platform build, which
prints "Hello-world" to stdout on startup.
The entire platform is built, with uip stack, radio drivers, routing, etc.
So it is not usually a simple build! The native platform is the default:
make
./hello-world.native
Starting Contiki
Hello, world
When switching between ipv4 and ipv6 builds on a platform,
make TARGET=<platform> clean
else the library for that platform will contain duplicate or unresolved
modules.
For example, using a loopback interface with the minimal-net platform:
cd /examples/hello-world
make TARGET=minimal-net
./hello-world.minimal-net
Hello, world
IP Address: 10.1.1.1
Subnet Mask: 255.0.0.0
Def. Router: 10.1.1.100
^C
make TARGET=minimal-net clean
make UIP_CONF_IPV6=1 TARGET=minimal-net
./hello-world.minimal-net
Hello, world
IPV6 Address: [fd00::206:98ff:fe00:232]
IPV6 Address: [fe80::206:98ff:fe00:232]
^C
Note to AVR Raven users: Output goes to UART1, not the LCD. To see it,
make TARGET=avr-raven hello-world.elf
Load the .elf in AVR Studio and connect a hapsim terminal to the 1284p simulation.