57 lines
1.7 KiB
Markdown
57 lines
1.7 KiB
Markdown
RE-Mote IP64 README file
|
|
========================
|
|
|
|
This example shows how to use the Zolertia's Orion Ethernet router, based on the Zoul and ENC28J60 modules, with active POE support.
|
|
|
|
IP64 router
|
|
-----------------
|
|
The router packs a built-in webserver and optionally can run on 2.4GHz or with the Sub-1GHz radio interface. In the `project-conf.h` file you can alternatively enable one or another as follows:
|
|
|
|
* RF 2.4GHz (cc2538 built-in)
|
|
|
|
````
|
|
#define NETSTACK_CONF_RADIO cc2538_rf_driver
|
|
#define ANTENNA_SW_SELECT_DEF_CONF ANTENNA_SW_SELECT_2_4GHZ
|
|
````
|
|
|
|
* RF Sub-1GHz (CC1200)
|
|
|
|
````
|
|
#define NETSTACK_CONF_RADIO cc1200_driver
|
|
#define ANTENNA_SW_SELECT_DEF_CONF ANTENNA_SW_SELECT_SUBGHZ
|
|
````
|
|
|
|
To compile and flash run:
|
|
|
|
````
|
|
cd ip64-router
|
|
make TARGET=zoul BOARD=orion ip64-router.upload
|
|
````
|
|
|
|
As default we enable the `DHCP` support for autoconfiguration. Just connect to a DHCP-enabled device to obtain an IPv4 IP address and that's it!.
|
|
|
|
HTTP client examples
|
|
-----------------
|
|
|
|
There are available 2 examples ready to use using the `http-socket` library:
|
|
|
|
* The `client` example just makes a HTTP `GET` request to a know page and retrieves
|
|
the result.
|
|
|
|
* The `ifttt-client` example sends a HTTP `POST` request to [IFTTT](https://ifttt.com/recipes) whenever the user button is pressed, building an Internet button to connect to several channels and applications, such as `Drive`, `Evernote` and many others.
|
|
|
|
To configure the `IFTTT` demo just edit the `project-conf.h` file and change the name of the event and write your API key:
|
|
|
|
````
|
|
#define IFTTT_EVENT "button"
|
|
#define IFTTT_KEY "XXXXXX"
|
|
````
|
|
|
|
To compile and flash:
|
|
|
|
````
|
|
cd client
|
|
make TARGET=zoul ifttt-client.upload
|
|
````
|
|
|