21e0900d18
Made constant addresses const
2009-03-23 16:22:02 +00:00
143bf11548
The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers
2009-03-23 16:20:37 +00:00
c791d851bb
Send an announcement packet only if there are more than zero announcemnets
2009-03-23 16:19:03 +00:00
91fa18e0e6
removed unused prototype
2009-03-23 10:58:00 +00:00
cc85a36722
use u8 when writing rime addresses.
2009-03-21 20:53:06 +00:00
f0e56df2eb
fixed compiler warning when timesynch is disabled
2009-03-17 09:57:01 +00:00
fb8fab739a
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 23:04:52 +00:00
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
537219bf27
Added a packet attribute to specify transmission power on outgoing packets
2009-03-11 20:33:17 +00:00
f304941ab4
raise busy forwarding flag before sending
2009-03-10 14:07:41 +00:00
1eb085834f
Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.
2009-03-09 12:54:27 +00:00
a1260c0c1f
Documentation updates
2009-03-08 21:43:24 +00:00
366ad7bece
Added Rime documentation from the Rime/Chameleon paper (SenSys 2007)
2009-03-07 11:15:46 +00:00
0a12098bd5
avoid ping pong packets during route disruption
2009-03-06 17:33:59 +00:00
64badeb282
bugfix: use memcpy() to get attributes longer than a byte properly written to packet header
2009-03-05 13:51:28 +00:00
08b2315f41
bugfix: put up busy forwarding flag only after next hop found
2009-03-04 08:59:32 +00:00
f701615afa
bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver.
...
+ added function for checking if runicast is currently transmitting (non-acked) data
2009-03-03 12:19:46 +00:00
9816f49fe6
Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy
2009-03-02 22:00:41 +00:00
78591a003f
Minor documentation update
2009-03-02 21:56:16 +00:00
45e32894a0
Bugfix: backwards definition of MIN macro (quite embarassing)
2009-03-02 11:22:09 +00:00
aa2f7a3399
Made polite announcement times configurable, added missing right-brace
2009-03-01 10:43:57 +00:00
3adf8e5807
Call output packet sniffers after the MAC has sent the packet
2009-03-01 10:29:50 +00:00
2aedc8490d
Compile only if timesynch is enabled
2009-02-20 21:23:22 +00:00
97f76126e6
remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course)
2009-02-17 12:40:18 +00:00
36bb3ece64
If no neighbor is found, we listen for announcements. Cleaned up debug output.
2009-02-16 01:18:53 +00:00
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
9d75781a78
Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY)
2009-02-10 23:51:12 +00:00
b15198b9a8
Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already
2009-02-10 23:49:58 +00:00
e1ef13dad6
Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...)
2009-02-10 00:44:50 +00:00
6c95bd895a
Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this.
2009-02-09 22:05:33 +00:00
0de445e035
Initialize the announcement module
2009-02-09 21:08:12 +00:00
3670ef2f44
Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery
2009-02-09 20:58:25 +00:00
4b71003c2f
Changed from random_rand() to rand() for better pseudo randomness
2009-02-07 18:43:45 +00:00
752291f450
Changed from random_rand() to rand() function for (pseudo) random numbers because random_rand() does not work that well
2009-02-07 16:16:31 +00:00
91e8487032
Added Doxygen documentation
2009-02-07 16:15:37 +00:00
be846d8c90
A new experimental network primitive called an 'announcement'. An
...
announcement is an (ID, value) tuple that is disseminated to local
area neighbors. An application or protocol can explicitly listen to
announcements from neighbors. When an announcement is heard, a
callback is invoked.
Announcements can be used for a variety of network mechanisms such as
neighbor discovery, node-level service discovery, or routing metric
dissemination.
Application programs and protocols register announcements with the
announcement module. An announcement back-end, implemented by the
system, takes care of sending out announcements over the radio, as
well as collecting announcements heard from neighbors.
2009-02-05 19:32:01 +00:00
4f1a9d3c75
bugfix: stopping timeout timer when we receive route reply (still limited to only one active discovery)
2009-01-21 14:29:24 +00:00
71e5adb254
Moved packet attributes specifications from rimebuf.h to the appropriate protocol header files
2009-01-15 22:15:51 +00:00
50b1e60621
Rewrote the rimeaddr_copy() loop to use the ->u8 field instead of the ->u16 field (which now finally is removed)
2008-11-30 18:26:57 +00:00
6951d9d582
Removed the unused ->u16 field (it was there only as a convenience/laziness access method during the initial development of the Rime stack, but has caused problems when being there)
2008-11-30 18:26:06 +00:00
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
229d60d691
Neighbor ETX should accumulate over retransmission timeouts;
...
Best neighbor has minimum sum of routing metric and neighbor ETX. Previously best neighbor prioritizes routing metric before neighbor ETX, which often causes a poor neighbor with a good upstream path to be selected.
2008-11-12 10:47:17 +00:00
8851a6359a
Remove unguarded printf()
2008-11-09 12:16:05 +00:00
f95cdc5abb
Main uIPv6 files addition
2008-10-14 09:40:56 +00:00
41dcd78c8b
Improved debugging output
2008-08-15 19:28:33 +00:00
31509ad726
Fixed a bunch of bugs in the collection neighbor announcement/discovery code: neighbor announcments were not repeated unless there was a change in the ETX val. Neighbor announcements happened to often when there were changes in the ETX.
2008-08-15 19:00:38 +00:00
210782d9c6
Set the channel as a packet attribute
2008-08-15 18:59:22 +00:00
9a4e5dfabf
Rewrote the neighbor discovery code so that messages are suppressed if a lower rtmetric is received. This reduces the overall number of broadcast packets.
2008-07-09 09:33:58 +00:00
9318117429
Fixed function prototype compiler warning
2008-07-08 10:59:31 +00:00
ba5c18a468
Rewrote the trickle code to run directly over the broadcast primitive: the previous implementation did not work as expected, because packets were not supressed correctly by the previous underlying netflood primitive
2008-07-07 23:29:30 +00:00
df33cb6e16
Only send ACK if it was possible to allocate a queuebuf to hold the data packet.
2008-07-07 23:27:57 +00:00
4d35b905d3
Bugfix: check should cover min(hdrsize, datalen), not max
2008-07-07 23:27:05 +00:00
cfcdac3122
Avoid crashing if Rime/Chameleon is not initialized when Rime code is run
2008-07-03 23:13:31 +00:00
4687c2c948
Renamed Rime module mh to multihop
2008-07-03 22:36:02 +00:00
d9b3097037
Renamed Rime nf module to netflood
2008-07-03 22:25:22 +00:00
ec22f3c2fc
Renamed Rime nf module to netflood
2008-07-03 22:02:09 +00:00
c2c3835110
Changed name of Rime module ruc to unicast
2008-07-03 21:52:25 +00:00
eddf71f534
Changed name of suc module to stunicast
2008-07-03 21:35:46 +00:00
8a1ed696d9
Slightly nicer formatting
2008-07-03 21:34:12 +00:00
a6682c4bfd
originator address is const
2008-07-03 17:58:10 +00:00
f274b26588
Added CC_CONST_FUNCTION as a work-around to the sdcc const function pointer bug
2008-07-03 07:38:52 +00:00
040d65c1f6
Added missing #include sys/cc.h to make system compile
2008-07-03 07:37:51 +00:00
d194d54e8e
CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const.
2008-07-02 15:02:33 +00:00
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
1d1ab90642
Added rimebuf attributes for RSSI, timestamp, and network ID (used for e.g. 802.15.4 PAN ID)
2008-06-30 19:57:10 +00:00
651a374eca
Removed unused sibc module
2008-06-30 19:56:08 +00:00
020a0c30aa
Rewrote the collect module to use packet attributes instead of explicit headers
2008-06-30 09:15:22 +00:00
6bbb99438e
Cleaned up Rime makefile - removed sibc, changed name of sabc to stbroadcast
2008-06-30 08:29:32 +00:00
e6079870fe
Changed name of the sabc module to stbroadcast
2008-06-30 08:28:53 +00:00
4349504219
Bugfix: fixed the missing arguments to make Rime compile
2008-06-27 16:44:58 +00:00
839b6111d6
Changed send function to return false if it was not possible to send
2008-06-26 11:38:59 +00:00
63c620303a
Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast'
2008-06-26 11:19:22 +00:00
fe4f8f4339
clear attributes when clearing buffer
2008-04-03 09:07:28 +00:00
f187981cd6
Fixed type offset bug in rimebuf_addr() and removed unused type for attributes and addresses. Replaced memcpy with loop.
2008-04-02 14:49:21 +00:00
8d47324d8f
fixed typo
2008-04-01 13:22:59 +00:00
fabe4393f7
fixed alignment problem with rime/chameleon
2008-04-01 13:10:22 +00:00
5901bf977a
Changed assignment to explicit copy to enable compilation with SDCC
2008-03-20 09:40:31 +00:00
39c85118d8
Ensure that header_module is != NULL before calling it. Define and print headers only if DEBUG is set.
2008-03-03 20:20:33 +00:00
edbae75705
Stick to CC_INLINE.
2008-02-28 21:25:34 +00:00
cefaa38581
-debugging output
2008-02-27 10:39:17 +00:00
a0c833da11
Mistakenly included development code in the Makefile target
2008-02-25 13:22:34 +00:00
412facb831
This is an initial commit of an implementation of the Chameleon
...
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.
The details are in our SenSys 2007 paper:
Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.
http://www.sics.se/~adam/dunkels07adaptive.pdf
This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
d99ca27820
Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
2008-02-24 22:05:27 +00:00
3c1b0f4e65
Debug output slightly improved
2008-02-24 21:09:08 +00:00
16c715aade
Updated collect_open() definiton to match prototype declaration
2008-02-24 21:08:37 +00:00
fc603fdcc6
constness
2008-02-05 20:18:57 +00:00
3d6c1c966b
Bugfix: forwarding functions now have access to its packet headers. Added last hop to the arguments to the reception function
2008-02-05 20:17:43 +00:00
33bcc24019
Increased timeouts, updated to match new mh API
2008-02-05 20:16:48 +00:00
465f75736d
Minor source code reformatting
2008-02-03 21:12:44 +00:00
53f0b7feb8
Added line drawing code when compiled for the netsim target
2008-02-03 20:52:41 +00:00
2886e03f57
Rewrote the neighbor code to use memb and a list instead of a static array
2008-02-03 20:44:11 +00:00
c576b7b01c
Optimized transmission when interval == 0
2008-01-25 01:06:25 +00:00
49ac5f9026
Show rt metric in netsim as number of expected transmissions
2008-01-24 21:11:40 +00:00
cdfe030980
Send immediately if interval == 0. Added debug information
2008-01-24 21:10:50 +00:00
29cc2b1266
Updated debug printouts
2008-01-23 16:10:10 +00:00
c8dccbbd40
Added a function for converting a timesynchronized time to a local (rtimer) time
2008-01-23 15:07:05 +00:00
5c169ac291
Better debug output
2008-01-21 12:19:27 +00:00
57b54894f8
Removed mistakenly added development files
2008-01-14 16:05:34 +00:00
34bd11905c
Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer
2008-01-14 14:50:01 +00:00
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
042180c13f
Rewrote the sniffer code to use a list, which makes it possible to add any number of sniffers. Sniffers now can be both for incoming and outoing packets.
2008-01-14 09:42:00 +00:00
7fcb1f3b2a
Updated debug output
2008-01-14 09:36:35 +00:00
b26754fd95
Removed unused code
2008-01-14 09:34:33 +00:00
7b94bfb621
Rewrote the code to use polite broadcasts istead of regular broadcasts. This reduces the amount of broadcast traffic, particularly for dense networks.
2008-01-14 09:34:00 +00:00
f6b4022511
Setting a lower value now causes a discovery packet go out quicker
2008-01-08 08:27:25 +00:00
bac26c90c8
Made a primary transmission go out immediately instead of within a random interval
2008-01-08 08:26:48 +00:00
a20202231d
Minor type change
2008-01-08 08:00:13 +00:00
d2be099c0e
Bugfix: queue buffers were not freed when a new packet was sent, leading to memory leakage. Added debug output.
2008-01-08 07:59:51 +00:00
c6a43333d2
Call the timeout function only if it is non-NULL
2008-01-08 07:58:49 +00:00
40d6216ec9
Added API for reading the routing table
2008-01-08 07:58:23 +00:00
601560b1eb
Added hopcount to callbacks
2008-01-08 07:55:56 +00:00
0c748d7dd2
Debug formatting fixes
2008-01-08 07:55:15 +00:00
f737127cca
Minor type change
2008-01-08 07:55:00 +00:00
16142f12c7
Removed unused code
2008-01-08 07:54:40 +00:00
88a010acdc
Added a simple sniffer callback, which currently is a hack - a better solution would be a list of sniffers for both outgoing and incoming packets, but this will do for now.
2008-01-08 07:53:02 +00:00
25a5434fb5
Sending with interval 0 made explicit
2008-01-07 14:53:04 +00:00
d33871facc
Bugfix: hops should be at least one for all packets that are sent over the radio
2008-01-07 14:52:23 +00:00
00d75c8d16
Made use of uip_ipaddr_to_quad().
2008-01-04 23:28:33 +00:00
3033b86753
Made the number of routing table entries configurable
2007-12-17 09:20:16 +00:00
758411d06d
Cleaned up #includes to avoid cyclic dependencies - the Rime includes no longer depend on rime.h
2007-12-17 09:14:08 +00:00
8287215c82
Removed obsolete, unused files
2007-12-17 09:12:16 +00:00
07e2ca9287
Documentation updates
2007-12-16 14:33:32 +00:00
43d394f758
Maximum rtmetric now defined by the collect module - a bit of a hack since this probably should be configured elsewhere (and be referenced by both the collect and the neighbor module) but it will do for now
2007-12-09 15:44:21 +00:00
5a89c19b5e
Changed to store neighbors' rtmetrics as 16 bit valued
2007-12-09 15:43:51 +00:00
01da62aa25
Changed local rtmetric name from 'local_rtmetric' to 'rtmetric' and updated the neighbor discovery module from nbh to neighbor-discovery
2007-12-09 15:43:09 +00:00
4e1d2906b7
Changed name on the neighbor discovery module from (cryptic) 'nbh' to 'neighbor-discovery'
2007-12-09 15:40:43 +00:00
761ad7dd57
Updated debug output
2007-12-05 13:40:34 +00:00
fff49f6671
Correct route lookup
2007-12-05 13:40:26 +00:00
36b7c7e782
Added missing forwarding function
2007-12-05 13:26:13 +00:00
bfd5db667a
Don't call the forward function if it is not defined
2007-12-05 13:25:07 +00:00
442516356a
Expose the Rime MAC driver so that applications can use it - a bit of a hack, but it works for now
2007-12-05 13:21:58 +00:00
6720b41707
Removed debug output
2007-11-28 20:03:50 +00:00
1fd6e1bef9
Increased default route lifetime to 60 seconds. Routes are now refreshed every time they are looked up.
2007-11-28 20:00:57 +00:00
996a8af0dd
Fixed include of ruc instead of abc
2007-11-28 20:00:07 +00:00
6e739853f7
Updated the multihop forwarding interface to match the intended operation of the module: to let the user produce the route, and the mh module only does the forwarding
2007-11-28 19:55:27 +00:00
dca1e0e446
Changed module name to 'collect' from 'tree' to better reflect the purpose of the module, rather than the particular data structure used to implement it
2007-11-28 16:04:41 +00:00
b07b46dd79
Removed unused return value from ruc recv callback
2007-11-27 23:32:34 +00:00
f6cf045413
Always add neighbors to the list regardless if their rtmetric is higher than ours or not. If our rtmetric rises, we may need ot have those neighbors in our list.
2007-11-26 23:31:44 +00:00
98854f80e0
Made Rime address size configurable through contiki-conf.h
2007-11-26 23:30:35 +00:00
75be20bea6
Added function for accessing a specific neighbor
2007-11-26 23:30:13 +00:00
58d6310979
Added #ifdef around MAX definition to avoid compiler warnings
2007-11-26 23:22:41 +00:00
1e1e44a3f8
Fixed compiler warnings to make code compile with gcc's -pedantic switch
2007-11-17 18:01:00 +00:00
7fd1eca954
Added debug output
2007-11-17 10:34:17 +00:00
9bd3c0c07c
Re-added hop count to header, fixes related to ETX computation: adv packets do not add a good etx, timedout packets do not restore the neighbor age, removed unused code
2007-11-17 10:32:54 +00:00
5e7cbff22a
Fixed compiler warnings
2007-11-17 10:12:19 +00:00
a7102829e3
Updated ruc callback types to fix compiler warnings
2007-11-17 09:59:48 +00:00
0a8b1cbd76
Updated ruc callback types to fix compiler warnings
2007-11-17 09:47:55 +00:00
532d9814c2
configurable rudolph datasize
2007-11-16 09:17:22 +00:00
c989d425dc
fixed compiler warning
2007-11-15 13:33:09 +00:00
a6d827fa1f
moved initialization of ctimer to allow MAC layer to use ctimers
2007-11-15 13:07:42 +00:00
c645cad175
fixed conflicting types: nbh.c vs nbh.h
2007-11-15 08:10:42 +00:00
0a7f35d62c
Added neighborhood discovery module
2007-11-13 21:01:54 +00:00
1386b8ae8f
Added API to retrieve address of current receiver
2007-11-13 21:00:10 +00:00
c40dde1209
Updated ruc to send ACKs before notifying applications, and API support for the etx-based tree code
2007-11-13 20:58:46 +00:00
6845d2a1aa
Updated tree to use expected transmissions (etx) as routing metric
2007-11-13 20:39:29 +00:00
44480fc7b7
added fix to enable start of ctimers before etimer process has started
2007-11-13 15:13:03 +00:00
6b7173809d
anonymous -> identified.
2007-11-12 12:34:29 +00:00
feed6cf679
const parameter to rimbuef_copyfrom()
2007-10-25 12:48:46 +00:00
9a11bc1543
only update rimestats rexmit for retransmissions + added debug output when retransmitting
2007-10-23 14:00:36 +00:00
0bf47de9ba
fixed compiler warning
2007-10-19 13:50:01 +00:00
d5580ae7ee
corrected debug print
2007-10-02 13:41:12 +00:00
1abf2c4c16
fixed compiler warning
2007-09-26 11:34:49 +00:00
33687d8e6f
A function declared in lib/random.h is used, so this file should be included
...
instead of lib/rand.h.
2007-09-14 20:26:52 +00:00
9d4fc0a1a8
Support for z80(sdcc) port.
...
In order to support, some core modules are modified as follows:
core/sys/dsc.h
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.
- DSC_HEADER is changed to remove extra semicolon.
core/sys/process.h
- process_data_t is expressed by void* in signatures (known bug on sdcc).
core/sys/autostart.h
- autostart_processes is changed to remove extra semicolon.
core/sys/cc.h
- CC_CONF_ASSIGN_AGGREGATE is introduced.
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
of sdcc bug for an increment.
core/net/hc.c
core/net/uip_arp.c
core/net/uaodv.c
- Aggregation assignments are changed to uip_ipaddr_copy.
core/net/psock.c
core/net/uipbuf.c
core/net/dhcpc.c
apps/shell/shell.c
core/ctk/vnc-server.c
core/ctk/vnc-out.c
- "register" keyword in a signature cannot be used in sdcc,
CC_REGISTER_ARG is used instead.
core/net/uip-over-mesh.c
- An extra semicolon is removed.
apps/dhcp/dhcp-dsc.c
apps/shell/shell-dsc.
apps/ftp/ftp-dsc.c
apps/process-list/process-list-dsc.c
apps/email/email-dsc.c
apps/webserver/webserver-dsc.c
apps/vnc/vnc-dsc.c
apps/vnc/vnc-viewer.h
apps/webbrowser/www-dsc.c
apps/about/about-dsc.c
apps/irc/irc-dsc.c
apps/telnet/telnet-dsc.c
apps/telnetd/telnetd-dsc.c
apps/netconf/netconf-dsc.c
apps/directory/directory-dsc.c
pps/calc/calc-dsc.c
- Modify an extern type to a real declaration, which is static
to prevent a compile error.
core/net/mac/xmac.c
- Variables cannot be defined in a head of block on sdcc.
core/ctk/ctk.h
core/ctk/ctk.c
apps/program-handler/program-handler.c
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.
Makefile.include
- Add a set of configuration for an assembler.
- $(CLEAN) variable is introduced for customized cleanup.
apps/process-list/process-list.c
- PROCESSLIST_CONF_HEIGHT is introduced to address smaller screen size.
core/lib/ctk-filedialog.c
- FILES_CONF_HEIGHT is introduced to address smaller screen size.
- "register" keyword in a signature cannot be used in sdcc,
CC_REGISTER_ARG is used instead.
apps/vnc/vnc-viewer.c
- A cast is added to prevent a compile error.
- "register" keyword in a signature cannot be used in sdcc,
CC_REGISTER_ARG is used instead.
apps/webbrowser/webclient.c
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
of sdcc bug for an increment.
core/loader/elfloader.c
- A cast is added to prevent a compile error.
core/net/rime/rimeaddr.c
- An initialization is added to prevent a compile error.
core/net/rime/rudolph0.c
- NULL is changed to 0, because NULL causes a compile error.
core/net/rime/route-discovery.c
- Add an argument to match the definition of nf_callbacks.
cpu/z80/strcasecmp.h
cpu/z80/strcasecmp.c
cpu/z80/contiki-sdcc-conf.h
cpu/z80/mtarch.c
cpu/z80/mtarch.h
cpu/z80/Makefile.z80
- New files to make compilation availble on sdcc.
- Added support for multithreading.
2007-08-30 14:39:16 +00:00
52eb372890
Modified to use the new MAC layer API
2007-05-25 08:06:44 +00:00
0e6b5e0099
Turn debug output off (which was inadvertedly left on)
2007-05-22 21:53:15 +00:00
37993d254d
Increased default neighbor lifetime, removed debug output
2007-05-22 21:15:17 +00:00
26903043a3
Updated format of debug output
2007-05-22 20:58:00 +00:00
e18b609039
Amount of retransmissions now configurable on a per-packet basis
2007-05-22 20:57:44 +00:00
c0d3b9111a
Stubborn timer now configurable on a per-transmission basis.
2007-05-22 20:57:20 +00:00
af43f26ed2
Multiplicative increase in retransmission time. Statistics. Max amount of retransmissions now configurable on a per-packet basis
2007-05-22 20:56:52 +00:00
525b37ca7a
Added Rime statistics.
2007-05-22 20:56:10 +00:00
396e8094c6
Added Rime statistics, rmh and rucb
2007-05-22 20:55:53 +00:00
a68b8a0a0d
Rime statistics gathering
2007-05-22 20:48:41 +00:00
0a26f4a712
Reliable single-hop unicast bulk transfer
2007-05-22 20:45:49 +00:00
0206e1cd3b
Hop-by-hop reliable multi-hop communication primitive (untested)
2007-05-22 20:45:18 +00:00
e5d6dd1db5
Removed sources from makefile which don't exist in the CVS repository.
2007-05-17 19:22:04 +00:00
940da856de
Bugfixes, updates
2007-05-15 08:09:21 +00:00
a9e8e9f4fe
Replaced uabc with polite, uibc with ipolite, added rudolph2
2007-05-15 08:08:05 +00:00
ac9ba33bd5
Yet another network bulk flooding protocol
2007-05-15 08:07:46 +00:00
db0571bef3
Identified polite broadcast primitive
2007-05-15 07:41:36 +00:00
f539f4efd8
Polite broadcast primitive
2007-05-15 07:41:22 +00:00
cda806dc84
Bugfix: rudolph1 sometimes failed because the first packet was received from a neighbor
2007-04-02 19:12:37 +00:00
2d42bd9e2a
Now keeps track of highest chunk number heard and sends NACKs until it sees it
2007-04-02 17:53:27 +00:00
a26906f478
Made send intervals configurable when sending a new file
2007-04-02 09:51:45 +00:00
ac3b3ea3ca
Removed unused file
2007-03-31 18:36:03 +00:00
6dc06d09af
Made the number of retransmissions configurable
2007-03-31 18:33:27 +00:00
91aa54dc77
Made advertisments for new shorter routes quicker, and advertisements for longer routes slower
2007-03-31 18:33:04 +00:00
0650a014b5
Documentation updates
2007-03-31 18:31:27 +00:00
bc1bb96809
Documentation fixes
2007-03-29 23:18:47 +00:00
2f079ca8e2
Debug output
2007-03-29 23:18:22 +00:00
4cde369174
Added call to timedout callback
2007-03-29 22:22:44 +00:00
81b469d4b7
Made buffer sizes configurable from contiki-conf.h
2007-03-29 22:22:20 +00:00
8e0ae73fa5
Increased default packet size to 64, removed out-commented code
2007-03-28 19:52:27 +00:00
75dc71f70b
Minor documentation change
2007-03-28 19:51:33 +00:00
f60b7aabcf
Added stdio.h for printf.
2007-03-26 22:45:49 +00:00
fbdd9799bd
Use random_rand() instead of rand() due to bug on msp430
2007-03-25 21:44:23 +00:00
06386b6f30
Reduce header before passing over to receiver
2007-03-25 21:44:06 +00:00
41630b0f03
Free queued packet when closing
2007-03-25 21:43:23 +00:00
adamdunkels
nifi
nvt-se
zhitao
fros4943
oliverschmidt
julienabeille
matsutsuka