Yasuyuki Tanaka
704847db04
Fix a typo, UIP_IPV6_CONF_MULTICAST, in a comment with UIP_CONF_IPV6_MULTICAST
2016-06-20 16:35:09 +02:00
Yasuyuki Tanaka
b074e5c3e0
Replece UIP_IPV6_MULTICAST_RPL in a comment with RPL_CONF_MULTICAST
2016-06-20 16:35:09 +02:00
Nicolas Tsiftes
a8989f9f1c
Merge pull request #1724 from nvt/coffee-simplify
...
Coffee: minor enhancements
2016-06-15 18:56:10 +02:00
Antonio Lignan
fba37e0131
Merge pull request #1624 from cedric-d/prevent-uip-buffer-overread
...
Prevent uIP buffer over-read with big UDP packets
2016-06-15 13:08:45 +02:00
George Oikonomou
5fe95fc425
Merge pull request #1709 from atiselsts/cc26xx_tsch_port
...
TSCH port for CC26xx
2016-06-15 10:28:58 +01:00
cedric-d
67e0575bd3
Prevent uIP buffer over-read with big UDP packets
...
When an UDP packet too big to fit in the uIP packet buffer is to be sent, the part fitting in the uIP buffer is copied to it (so no buffer overflow occurs) but uIP actually sends a packet of the original size therefore a buffer over-read occurs.
This modification makes uIP discard the UDP packets that do not fit in the uIP packet buffer.
2016-06-15 10:51:20 +02:00
Simon Duquennoy
872146def0
Merge pull request #1720 from joakimeriksson/rpl_ns_periodic
...
Fix for compilation with clang - issue reported by Olaf Bergmann
2016-06-15 10:27:58 +02:00
Antonio Lignan
fa88122140
Merge pull request #1589 from ibriano/master
...
Allow creating connections on unspecified local port
2016-06-14 21:30:34 +02:00
Nicolas Tsiftes
a06110e5ed
Renamed the internal dummy_space variable, since it contains useful information.
2016-06-14 21:08:01 +02:00
Nicolas Tsiftes
5010309005
Make the I/O semantics functionality in Coffee unconditional so that the API becomes consistent across platforms.
...
Change certain CPP conditionals into C conditionals, which should be possible for the compiler to optimize at runtime. This makes the source code easier to read.
2016-06-14 21:08:00 +02:00
Atis Elsts
6800f9502e
Update the list of supported platforms in TSCH README file
2016-06-14 19:47:59 +03:00
Atis Elsts
e233c3f27f
cc26xx: change CCA logic to be standard-compatible; change receiving_packet to return true iff sync (SFD) has been seen
2016-06-14 00:54:33 +03:00
Atis Elsts
d85667d535
cc26xx: packet queue changes: allow to read packets after radio has been turned off; make pending_packet() return true when there is a packets being received
2016-06-14 00:54:33 +03:00
Atis Elsts
54e4b5f351
cc26xx: allow IEEE 802.15.4 frames with version 2, required for TSCH
2016-06-14 00:54:33 +03:00
Atis Elsts
80aa30c5da
cc26xx: add support for RADIO_PARAM_TX_MODE getting and setting and for LAST_RSSI and LAST_LQI reading
2016-06-14 00:54:33 +03:00
Atis Elsts
25c5f0b744
cc26xx: implement support for CC2650_FAST_RADIO_STARTUP
2016-06-14 00:54:33 +03:00
Atis Elsts
97c1cfc3b4
cc26xx: return the expected value 0 from prepare() in ieee and prop mode radio
2016-06-14 00:54:33 +03:00
Atis Elsts
e19fbc996e
cc26xx: use CMD_IEEE_MOD_FILT to change address filtering instead of fully restarting the radio
2016-06-14 00:54:33 +03:00
Atis Elsts
3a99639294
cc26xx: implement CC2650_FAST_RADIO_STARTUP option, required for TSCH
2016-06-14 00:54:33 +03:00
Atis Elsts
a47fb723e4
cc26xx: enable sync between radio timer and RTC, useful for TSCH
2016-06-14 00:54:33 +03:00
Atis Elsts
95b66657aa
cc26xx: add TSCH-related rtimer defines
2016-06-14 00:54:32 +03:00
Atis Elsts
ac6f8008fd
cc26xx: implement poll mode, hardware timestamps, and other minor changes in the IEEE radio driver
2016-06-14 00:54:32 +03:00
Atis Elsts
3ff8aa8ad8
srf06-cc26xx: add node_id variable
2016-06-14 00:54:32 +03:00
Atis Elsts
f99511f494
srf06-cc26xx: add default TSCH configuration for the platform
2016-06-14 00:54:32 +03:00
Simon Duquennoy
30e820ffa5
Merge pull request #1708 from atiselsts/tsch_enhancements
...
TSCH enhancements
2016-06-13 20:58:02 +02:00
George Oikonomou
4b67e21d2e
Merge pull request #1714 from alignan/pull/add-relay
...
Added generic relay driver for the zoul-based platforms
2016-06-13 19:45:46 +01:00
Joakim Eriksson
7853a7434b
fix for compilation with clang - issue reported by Olaf Bergmann
2016-06-13 16:18:16 +02:00
Simon Duquennoy
4fd8f67053
Merge pull request #1715 from sumanpanchal/zoul-tsch
...
TSCH port for Zolertia ReMote/Zoul.
2016-06-13 09:03:16 +02:00
Sumankumar Panchal
373fda46f7
TSCH port for Zolertia ReMote/Zoul.
2016-06-12 16:37:01 +05:30
George Oikonomou
80e4ca7802
Merge pull request #1718 from bthebaudeau/print-cc2538-info-on-boot
...
Print CC2538 info on boot
2016-06-12 00:27:31 +01:00
Benoît Thébaudeau
9845973971
cc2538: Print SoC information upon startup
...
If STARTUP_CONF_VERBOSE is enabled, print SoC information upon startup.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Benoît Thébaudeau
b655d92aa4
cc2538: Provide SoC information
...
Add functions providing the SoC revision, SRAM size, and enabled
hardware features, as well as a function printing SoC information.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Benoît Thébaudeau
b3ea790449
cc2538: sys-ctrl: Provide last reset cause
...
Add functions providing the last reset cause, one as an integer (ID),
and one as a string.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Atis Elsts
f0fcff2d1a
TSCH: declare `radio_rx_mode` only when HW timestamps are enabled to avoid warnings
2016-06-10 15:04:07 +03:00
Atis Elsts
5b728691ad
TSCH: add missing include
2016-06-10 15:04:07 +03:00
Atis Elsts
fbb66f9cd5
TSCH: allow to configure channel scanning duration during the join phase
2016-06-10 15:04:07 +03:00
Atis Elsts
b57009e564
TSCH: fix signedness in adaptive timesync
2016-06-10 15:04:07 +03:00
Atis Elsts
03d511c2be
tsch-slot-operation.c: use ABS() instead of abs() for consistency with the rest of Contiki
2016-06-10 15:04:06 +03:00
Atis Elsts
f6967c1f58
read RADIO_PARAM_LAST_RSSI and RADIO_PARAM_LAST_PACKET_TIMESTAMP only after the last packet has been read in TSCH: reading the packet might update these values
2016-06-10 15:04:06 +03:00
Atis Elsts
45510f57fa
TSCH: add option to not to turn off radio during active TSCH timeslots
2016-06-10 15:04:06 +03:00
Atis Elsts
723c7e1117
print TSCH clock drift ppm whenever updated
2016-06-10 15:04:06 +03:00
Atis Elsts
b3afd65b1d
fix a few comments in TSCH
2016-06-10 15:04:06 +03:00
Atis Elsts
0cb222e6e1
add 2-channel TSCH hopping sequence
2016-06-10 15:04:06 +03:00
Nicolas Tsiftes
8e6c6cc45b
Merge pull request #1687 from tsparber/fix-rpl-ex-header-len-unit
...
rpl-ext-header: Use 8-octet unit for HBHO length
2016-06-09 16:28:27 +02:00
Antonio Lignan
092f0e62fe
Added generic relay driver for the zoul-based platforms
2016-06-09 15:53:25 +02:00
Tommy Sparber
27cceda1e8
rpl-ext-header: Use 8-octet unit for HBHO length
...
According to RFC 2460 the length field of the Hop-by-Hop options header
should use a 8-octet unit (multiple of 8 byte).
In a normal configuration the RPL_HOP_BY_HOP_LEN define is 8, so the
current implementation works, but if RPL_HOP_BY_HOP_LEN is a multiple
of 8 the length is not calculated correctly.
2016-06-08 17:37:59 +02:00
Nicolas Tsiftes
10cd17b626
Merge pull request #1508 from simonduq/pr/rpl-non-storing
...
RPL non storing mode
2016-06-08 16:26:05 +02:00
Simon Duquennoy
535ff25da2
RPL non-storing defensive link update: make sure the topology is loop-free at all times
2016-06-08 14:14:03 +02:00
Simon Duquennoy
819916668e
Incorporate latest changes on rpl tests to 23-rpl-non-storing
2016-06-08 14:09:43 +02:00
Simon Duquennoy
d5e74b9579
Code style
2016-06-08 14:05:37 +02:00