giomba/nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
9,759 Commits 1 Branch 0 Tags 92 MiB
d16348482e
Commit Graph

1182 Commits

Author SHA1 Message Date
dak664
570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
salvopitru
d0db3fc39a Added a check for Coffee start address. 2010-12-15 15:01:00 +00:00
dak664
1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
salvopitru
5fe80dd99d Added elfloader machine dependent code for STM32W. 2010-12-15 11:10:20 +00:00
dak664
c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664
58b7a19803 Hardware/software radio HAL patch from Roger Larsson. 
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
 2010-12-03 20:42:01 +00:00
dak664
21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schäfer 2010-12-03 18:16:56 +00:00
dak664
0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions. 
Minor speed optimizations.
 2010-11-30 19:47:40 +00:00
nifi
7110afdad5 added missing include 2010-11-27 15:27:20 +00:00
dak664
dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
adamdunkels
149f4e8d21 Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers 2010-11-25 09:22:56 +00:00
dak664
880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
adamdunkels
4fac3037e0 Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash. 2010-11-15 21:52:54 +00:00
dak664
69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664
9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
nifi
5de83c9085 Only include code for stack printouts when needed 2010-11-12 15:54:41 +00:00
maralvira
3426eae031 fix typos 2010-11-11 20:37:33 +00:00
maralvira
9b2a2bb5e6 fix up stdint include 2010-11-10 22:12:29 +00:00
maralvira
6da84819dd use stdint.h instead of custom types.h 
stdint.h is more portable across compilers
 2010-11-10 22:06:28 +00:00
maralvira
e229022f38 include crm.h 2010-11-10 21:58:12 +00:00
salvopitru
28e1445a0f Added a simple implementation of Coffee for STM32W108. 2010-11-10 11:20:44 +00:00
maralvira
dfbc81158b Allow CROSS to be overridden with CROSS or CROSS_COMPILE 2010-11-09 13:13:45 +00:00
maralvira
1aac14f252 add tutorial explaining how to set up an RPL network of econotags 2010-11-09 01:30:01 +00:00
maralvira
3b515587c5 change how prepare and transmit work --- Contiki expects to call 
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
 2010-11-07 20:07:42 +00:00
maralvira
e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira
4664151419 fix build errors with start.S 2010-11-07 15:19:45 +00:00
maralvira
29333232d5 add section .start and undef _start so that _start is placed by the 
linker correctly
 2010-11-07 14:57:53 +00:00
maralvira
b8ebce0fef add a memory section for RAM so that the linker will warn when you've 
made your program too big.
 2010-11-07 14:54:05 +00:00
maralvira
8385536c41 fix how start object is linked 2010-11-07 14:52:23 +00:00
maralvira
f38598ce9f clear BSS 2010-11-07 14:49:42 +00:00
maralvira
57513948c9 Move stack near BSS so it doesn't take up space in the .bin 2010-11-07 14:48:52 +00:00
maralvira
77cf0f0f5e update ring_osc_on and _off to the new bit structs 2010-11-07 14:42:31 +00:00
maralvira
c8056cc4e2 define TCF TCF1 and TCF2 --- the new bit structs don't work here for 
some reason.
 2010-11-07 14:42:02 +00:00
maralvira
dab7faf13c Add gpio_set and gpio_reset 
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
 2010-11-07 14:29:04 +00:00
maralvira
4a4a39c84a Name the GPIO structure so we can set multiple bits at once 2010-11-07 14:28:30 +00:00
maralvira
4217eb2ebc Provide a function to change timer interrrupt handlers 
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime.  This lets us set handlers
without necessarily knowing the name at link-time.  The old way of
having weakly-linked tmr0_isr functions should still work.
 2010-11-07 14:27:01 +00:00
maralvira
65d3942c76 Add the disable_int({}) macro 
This is similar to safe_irq_enable and disable
 2010-11-07 14:26:24 +00:00
maralvira
83e6995af1 Add TMR_ADDR helper 2010-11-07 14:25:07 +00:00
maralvira
d930ce0e2b Add some useful timer macros 2010-11-07 14:24:36 +00:00
maralvira
5e00219a9c Register definitions: get rid of some macro magic that doesn't help much 
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
 2010-11-07 14:24:11 +00:00
maralvira
091e4cd84e Add structure-based ITC access 2010-11-07 14:23:15 +00:00
maralvira
11ac20a361 REF_OSC is a 32-bit number, not 64-bit number 2010-11-07 14:22:51 +00:00
maralvira
745e7b5ac2 Add cal_isr() support 2010-11-07 14:21:59 +00:00
maralvira
ab84453401 Add structure-based CRM definitions 2010-11-07 14:21:33 +00:00
maralvira
9d072d5309 Add macro to help compute TMR.ENBL values (useful when using #defined 
values to represent timers)
 2010-11-07 14:21:06 +00:00
maralvira
85e6b06175 Add pin definitions for each timer, they're fixed 2010-11-07 14:19:17 +00:00
maralvira
8d2f740f7f Fix #ifdefs in board files 2010-11-07 14:18:54 +00:00
maralvira
3726588f02 Add structure-based GPIO register definitions 2010-11-07 14:17:45 +00:00
maralvira
20b477db13 Add structure-based timer register definitions 2010-11-07 14:17:20 +00:00
maralvira
c71a0243ff Add missing type for TMR0_COMP2 2010-11-07 14:16:28 +00:00
maralvira
62a45c7ba2 Add script to invoke kermit with a particular port and speed 2010-11-07 14:15:40 +00:00
maralvira
2ac88222f6 Use "rm -f" in clean rules to ignore errors 2010-11-07 14:14:47 +00:00
maralvira
2e87143381 use kermit in open-terms 2010-11-07 14:13:22 +00:00
maralvira
c8be3047c3 fix byte ordering in burn-macs 2010-11-07 14:12:55 +00:00
maralvira
0450b3fd90 add script that burns the mac address only --- mac address is Redwire 
IAB + tty number.
 2010-11-07 14:12:27 +00:00
maralvira
f913cf728b modify flasher.c to not create a vaild boot magic number if the length 
of the file is zero

modify mc1322x-load.pl to optionally send a zero length file with -z;
extra data on the command line is still written.

This allows you to burn the mac adress without flashing a vaild image.
 2010-11-07 14:11:50 +00:00
maralvira
9f7d860e9c add scripts to help load a bunch of econotags 2010-11-07 14:11:18 +00:00
maralvira
8b2ef2675d discard received packets --- this lets you run multiple rftest-tx's at 
the same time.
 2010-11-07 14:10:16 +00:00
maralvira
e00349509d add simple install rule 2010-11-07 14:09:43 +00:00
maralvira
ee943c062d add autoreset command and do_exit option 2010-11-07 14:08:50 +00:00
maralvira
e886e83908 fix bug in print_packet 
Thanks dean and jim.
 2010-11-07 14:07:33 +00:00
maralvira
f1fede7090 get LQI of received packets 2010-11-07 14:06:57 +00:00
maralvira
ae0b7f846f Fix the CNTR defines. 
Thanks to Ruslan for finding this.
 2010-11-07 14:04:59 +00:00
maralvira
646a37f8b3 use the hardware random number generator 2010-11-07 13:52:12 +00:00
dak664
eb0d5c7f45 Add missing includes 2010-11-03 16:55:40 +00:00
oliverschmidt
1dfe490f9b Use some defined event constant instead of just 0. 2010-10-31 22:51:17 +00:00
dak664
9194b3ac69 Fix error when RS232 not enabled 2010-10-28 19:31:28 +00:00
dak664
ad6712736b Fix Windows XP RNDIS+CDC serial port enumeration 2010-10-28 19:30:14 +00:00
dak664
258e3cc93a Allow simultaneous use of RS232 and USB serial ports 2010-10-27 14:51:20 +00:00
salvopitru
d8711d32a3 Added configuration in order to run Rime. 2010-10-27 14:05:23 +00:00
salvopitru
db3f1864a0 Increased minimum stack size, because rpl uses it much more. 2010-10-26 11:07:20 +00:00
salvopitru
33ccbbb509 Fixed compile error raised after rand.c removal. 2010-10-26 10:47:23 +00:00
salvopitru
444a00949a Added missing libraries. 2010-10-26 10:24:17 +00:00
salvopitru
790f13a689 More safe detection of cygwin path. 2010-10-26 07:26:40 +00:00
salvopitru
ec5e3ce0d7 New Contiki port to STM32W108. 2010-10-25 09:03:38 +00:00
adamdunkels
34f6a60a4a By default, don't print stack on reboot, since there are cases where this may hang the CPU (when the CPU is in LPM when the watchdog triggers). Must fix the code to set the UART and CU into correct modes before enabling stack printout on reboot. 2010-10-24 21:10:25 +00:00
oliverschmidt
9a8c62a629 Removed remark on using cc65 snapshot. 2010-10-23 19:42:53 +00:00
dak664
123e3cae41 Fix compiler warnings 2010-10-23 15:26:46 +00:00
oliverschmidt
5e10cf2eed Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends. 2010-10-23 13:48:06 +00:00
oliverschmidt
9e9eb4b55c There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway. 2010-10-23 08:17:45 +00:00
oliverschmidt
b84f771c6b The recent change in core/net/mac/lpp.c requires CLOCK_SECOND to be at least twice NETSTACK_RDC_CHANNEL_CHECK_RATE in order to compile. 2010-10-22 20:28:58 +00:00
dak664
7be7a34bbb Fix windows COM port enumeration 2010-10-22 19:15:43 +00:00
dak664
774474b7aa Fix compiler warning 2010-10-20 18:57:33 +00:00
oliverschmidt
842c6a018a The recent global change regarding htons allowed to remove this hack :-) 2010-10-19 20:30:47 +00:00
adamdunkels
5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro 
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
 2010-10-19 18:29:03 +00:00
oliverschmidt
35f7b6046e Fixed 'Modulo operation with zero' error by making sure that NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE is not smaller than CLOCK_CONF_SECOND. 2010-10-06 19:48:26 +00:00
oliverschmidt
a40594b7ce Display correct name of statically loaded driver. 2010-09-29 21:48:54 +00:00
oliverschmidt
c839eacbdf Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/. 2010-09-29 19:44:01 +00:00
oliverschmidt
55d61d317b Allow cc65 ethernet drivers to be loaded statically instead of dynamically. This saved quite some space in scenarios without additional cc65 drivers to be loaded for i.e. a mouse because in those scenarios the cc65 module loader isn't necessary. And without the module loader typically the cc65 heap manager isn't necessary. 2010-09-28 23:02:16 +00:00
adamdunkels
7c14899eeb Made stack printout on reboot configurable. 
Added the ability to turn on watchdog multiple times - the watchdog
registers are touched only when the watchdog goes from off to on state
to avoid retriggering the watchdog when it shouldn't.
 2010-09-22 22:12:37 +00:00
dak664
110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
nifi
f5ea831445 Added function rtimer_arch_now that makes sure that the timer value does not change between readouts to avoid reading while the timer is being updated. 2010-09-13 20:51:09 +00:00
maralvira
1cb0762bd0 Don't post from an interrupt context --- this resulted in process 
corruption if a packet was received at the wrong time.

The maca_thread now just PAUSEs and checks rx_head instead of waiting
for a data event to be posted.
 2010-09-13 14:15:58 +00:00
joxe
c0549cad3d added some files for MSP430X I/O 2010-08-24 16:23:20 +00:00
maralvira
df9d43ab83 increase the reception time now that tx_packet will advance the timer 
as necessary.
 2010-07-28 18:49:34 +00:00
maralvira
9a7a2742b3 remove bad call to maca_on() 
maca_on() resets the maca and phy, takes a long time, and clobbers any
packet that is currently being transmitted or received. It doesn't
belong in prepare and was the source of a lot of latency and bad
packet transmissions.

Make sure the maca is on somewhere else.
 2010-07-28 18:48:51 +00:00
maralvira
a3b9c2adb0 in tx_packet, force an interrupt if the maca isn't doing anything so 
that the transmit starts. Or if the maca is in a reception cycle,
advance the softclock timeout to now so that transmission starts as
soon as possible (immediately if a packet isn't being received or
right after reception finishes).
 2010-07-28 18:48:03 +00:00
maralvira
593a50c38f make the debug prints in check_maca more specific 2010-07-28 18:47:35 +00:00
maralvira
422d05003f use 32 packets in the pool by default 2010-07-28 18:47:05 +00:00
maralvira
eb0e3b7989 fix long standing bug where the last pages of NVM were not erased 
properly.
 2010-07-28 18:43:04 +00:00
oliverschmidt
c602c61468 Activated Platform-specific File System (PFS) for the C64/C128 by default for all programs with R/W CFS access. 2010-07-22 10:30:12 +00:00
oliverschmidt
9c0f5d857c Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t. 2010-07-21 22:35:59 +00:00
maralvira
5b44d6a29a properly drop characters when buffer is full 
fix by David Kopf
 2010-07-06 13:39:34 +00:00
joxe
0c5390339f updated to new cc2420 spi naming 2010-06-23 10:44:41 +00:00
joxe
705f8cc451 fixed naming of SPI and CC2420 related code 2010-06-23 10:19:15 +00:00
dak664
898c00b812 Remove usually extra avr-size command 2010-06-22 17:11:38 +00:00
dak664
e45b1c042b TIMER2 uses TIMER2 interrupt vector! 2010-06-22 16:17:24 +00:00
dak664
ab7f3bd8e3 Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen. 2010-06-18 17:30:30 +00:00
dak664
cb45883970 Turn on DEBUGFLOW and software CRC computation 2010-06-18 15:44:53 +00:00
nifi
20c8b4f9c6 removed obsolete comments 2010-06-15 13:30:42 +00:00
adamdunkels
3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
maralvira
419906a769 initial mc1322x commit 
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
 2010-06-10 14:55:39 +00:00
maralvira
285f508cc9 initial commit of src files 2010-06-10 14:49:31 +00:00
maralvira
bf9f960bbe add board files. 2010-06-10 14:48:32 +00:00
maralvira
1145fa9ba9 initial mc1322x commit 
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
 2010-06-09 14:43:22 +00:00
oliverschmidt
d28865abac Adjusted hacky inline assembler to reference uip_aligned_buf instead of uip_buf - some day I'll need to clean up that (btw bogus) code. 2010-05-30 10:12:30 +00:00
oliverschmidt
126ea40994 Removed UIP_CONF_PLAIN_BUFFER again now that the pointer indirection to uip_buf was removed again. 2010-05-30 09:46:12 +00:00
nifi
808116ff56 Made SFD timestamps configurable via external definition 2010-05-10 11:32:44 +00:00
oliverschmidt
2169932727 Have the cc65 based targets stay with the "old" plain uip_buf. 2010-05-08 07:25:10 +00:00
dak664
972e2f5d4f Add MCU to avr-size command; Remove fuse and signature from .hex; Give bootloader more memory 2010-05-04 14:14:49 +00:00
nifi
9638789d9d Added rule to use MSPSim to show the maptable from the last compilation on MSP430 targets 2010-04-20 15:38:09 +00:00
oliverschmidt
7b5bde6336 Made the maximum number of concurrent TCP connections a highlevel config value. 2010-04-11 20:47:16 +00:00
anthony-a
04fb6e5b42 initial add. 2010-04-10 21:18:32 +00:00
anthony-a
3de90a9671 fix adc compile errors when HAVE_DMA is not true. 
remove reference to brione_lcd.h
turn off DEBUG messages.
 2010-04-10 19:59:37 +00:00
oliverschmidt
21f8e4e982 Made MAC_CONF_CHANNEL_CHECK_RATE identical to CLOCK_CONF_SECOND in order to make sure it isn't larger - which causes 'divide by zero' errors. 2010-04-05 15:17:22 +00:00
oliverschmidt
9831f02eba Replaced dummy code with code taken from 'native'. 2010-04-05 15:13:50 +00:00
oliverschmidt
ffce456612 If rtimer_arch_now() is mapped to clock_time() it seems reasonable to map RTIMER_ARCH_SECOND to CLOCK_CONF_SECOND for consistency reasons. 2010-04-05 15:10:06 +00:00
oliverschmidt
26e61ac3f7 Programs using CFS should #include "cfs.h" ;-) 2010-04-05 13:41:29 +00:00
adamdunkels
5eb22ad289 Print out stack pointer when rebooting node 2010-04-04 12:30:10 +00:00
adamdunkels
0ed236e774 Bugfix: the clock interrupt now flushes the energy estimator to avoid overflow of the LPM mode 2010-04-04 12:29:50 +00:00
adamdunkels
52ad0008dc Bugfix 2010-03-31 11:55:04 +00:00
adamdunkels
4447782ab4 Print out a stack trace when a node reboots because of the watchdog 2010-03-30 23:02:23 +00:00
adamdunkels
ac172a5575 Turn off LPM mode for clock interrupts to avoid rtimer wrapping during extended LPM 2010-03-29 21:53:32 +00:00
oliverschmidt
54e19782ae Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations. 2010-03-27 15:16:57 +00:00
oliverschmidt
6769e6a99f - Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations. 
- Completed declarations.
 2010-03-27 14:46:08 +00:00
nifi
ebfa6c5ef1 only include memcpy/set workaround when needed 2010-03-21 10:40:15 +00:00
joxe
e99c906caf activated the new workaround... 2010-03-19 14:50:07 +00:00
joxe
7e6919cc8c fixed workaround for memcpy/set to be memory efficient but slower 2010-03-19 14:39:45 +00:00
adamdunkels
04cdae05c3 Increased the rtimer granularity: needed to make contikimac work 2010-03-19 13:25:52 +00:00
dak664
0265f09a5c Add RS232 port option to jackdaw USB stick 2010-03-15 18:52:55 +00:00
fros4943
db777ce3d0 reverted previous patch: appears to create problems on hardware 2010-03-05 12:06:03 +00:00
nvt-se
7543d53603 Ensure that the UART port is available before writing 2010-03-03 23:18:58 +00:00
dak664
01a3912864 Define and use radio STATE_TRANSITION, improve debug messaging 2010-03-02 16:29:59 +00:00
dak664
39e6f6a830 Clean up, functional webserver for further testing of low power protocols 2010-02-28 21:29:19 +00:00
dak664
d61676b8f7 Add RADIOALWAYSON to monitor packet losses with low power protocols 2010-02-28 21:19:33 +00:00
dak664
5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664
844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
dak664
195f5939c4 Clean up after testing 2010-02-26 20:51:48 +00:00
adamdunkels
465125c5e7 Added support for 32-bit clock ticks: when reading the 32-bit value, make sure that it does not change between readouts to avoid reading right in the middle of it being updated 2010-02-23 18:41:20 +00:00
dak664
7274f1d1ed Report operating channel with either radio driver 2010-02-23 17:40:09 +00:00
dak664
4ded42db1e Add sniffer and 802 frame reporting 2010-02-23 17:37:51 +00:00
dak664
b4bc7fc3da Make RF230BB the default radio driver 2010-02-23 02:01:46 +00:00
dak664
cbb8621e30 update to new driver format 2010-02-22 22:23:18 +00:00
dak664
658c35df11 remove debug printf 2010-02-22 22:21:15 +00:00
adamdunkels
953a8c2015 Turn off timer before updating - needed to avoid bugs in ContikiMAC - not 100% sure why 2010-02-18 22:15:54 +00:00
oliverschmidt
1817acae15 Now that the C64 mouse driver works we can activate the mouse support for this target :-) 2010-02-18 21:30:31 +00:00
dak664
a83381de30 add rtimers for cxmac 2010-02-18 17:21:44 +00:00
dak664
fee5efb141 additions for cxmac 2010-02-18 17:20:50 +00:00
dak664
98b69e1bff No sniffer yet for RF230BB 2010-02-16 22:55:20 +00:00
dak664
23f6949af6 RF230BB addition 2010-02-16 22:51:40 +00:00
dak664
b0930cf2ec Move rtimer-arch.c inclusion from platform to cpu 2010-02-16 21:56:15 +00:00
dak664
0f59ba3187 Add rtimers, allow Jackdaw to use RF230BB driver 2010-02-16 21:48:38 +00:00
dak664
893a31f49b Jackdaw additions 2010-02-16 21:41:24 +00:00
dak664
8603f0f0f6 Add RADIOSTATS 2010-02-12 18:00:30 +00:00
dak664
a6ab27402a Add RADIOSTATS 2010-02-12 16:41:02 +00:00
dak664
eb2ac1a154 Make seconds a global variable, add optional radio on time 2010-02-12 14:37:50 +00:00
ksb
8e7ada96d3 Use .u prefix for uploading to device and PROG variable to select programmer 2010-02-10 10:08:36 +00:00
oliverschmidt
50be40768b Removed closing of stdin, stdout (and stderr on the Apple2). It was introduced in order to maximize the number of available file handles for the webserver. However none of the target machine DOSes allows to open a single file several times diminishing the intended effect very much. One the other hand not being able to "just printf() something" causes trouble over and again - i.e. hello-world seemingly not working...after all a typical case of german over-enigneering ;-) 2010-02-10 07:43:25 +00:00
oliverschmidt
1ac4d7f501 Used CFS instead of POSIX. 2010-02-08 22:26:19 +00:00
oliverschmidt
5570972957 Added a Contiki app basically combining apps/netconf and apps/dhcp. It's a 6502 specific app as it doesn't configure the running uIP instance but instead writes to the 'contiki.cfg' configuration file used by 6502 apps to configure uIP. 2010-02-08 22:08:17 +00:00
adamdunkels
dea4826f94 Added watchdog.c to the USB stick code 2010-02-07 23:05:20 +00:00
adamdunkels
091483c150 Added dummy watchdog functions for all AVR platforms 2010-02-07 07:43:35 +00:00
ksb
387483ad24 Missing file 2010-02-05 16:41:23 +00:00
ksb
2c955d6e3f Synchronizing with my work copy. 2010-02-05 16:23:40 +00:00
ksb
cd30fa2b50 Removing obsolete directory, moved to cpu/arm/at91sam7s/ 2010-02-05 15:07:26 +00:00
oliverschmidt
2d40c75efe Allow 6502 ctk programs (all running in non-window mode) to exit the Contiki process by calling LOAD_UNLOAD(). 2010-02-04 23:52:30 +00:00
c_oflynn
95d0b09954 -Fix that can cause USB stick to freeze up 
-Add EEM Support
 2010-02-04 10:40:00 +00:00
oliverschmidt
4189884793 Don't activate UDP checksums on 6502 targets as the inline-assembler implementation in cpu/6502/net/uip_arch.c is broken! 2010-01-30 20:54:15 +00:00
oliverschmidt
26c9ec41f7 Activate uIP logging when "high level config" logging is enabled. 2010-01-30 20:48:31 +00:00
adamdunkels
4ff6b5460a Removed safeguards around the update code for the timer; turns out they weren't needed (but instead triggered a bug in MSPsim) 2010-01-30 14:03:35 +00:00
anthony-a
76749a382d move cc2430_process to home bank since it needs to be called from a function pointer. 
disable led code to make room in home bank.
 2010-01-29 19:15:44 +00:00
anthony-a
507460d29a update code bank assignments 2010-01-29 19:13:00 +00:00
adamdunkels
dbacf3e781 Values altered in interrupt handlers should be volatile 2010-01-26 10:20:16 +00:00
anthony-a
dbdf9982a9 change bank assignments. 
add missing header file.
add ihx converter
 2010-01-26 02:37:51 +00:00
anthony-a
1427c79b7a include new files in source file list. 2010-01-25 23:24:03 +00:00
anthony-a
6280cea706 remove bank macros which are now in banked.h 2010-01-25 23:13:04 +00:00
anthony-a
9cfe29612a Modifications to support banked code. Interrupts and routines accessed through function pointers reside in independent files so they can be assigned to the HOME bank. Init code can be placed in any bank. 
Also add adc init code and bank header files.
 2010-01-25 23:12:09 +00:00
c_oflynn
15ffaeed86 Fix for error where USB host could send NAK, but isn't considered in jackdaw, resulting in jackdaw hanging 2010-01-24 13:01:58 +00:00
anthony-a
742c5a0782 add definition for PSBANK used in sdcc crtbank.asm 2010-01-21 15:37:18 +00:00
anthony-a
acc1fe923c rules file for assigning code files to specific banks. 2010-01-21 15:34:26 +00:00
anthony-a
2f853dc930 Add support for bank switching and segment.rules file to assign code to banks. 2010-01-21 15:33:19 +00:00
adamdunkels
5a03e4e6ad Bugfix: changed #ifdef to #if, otherwise the SFD code would be enabled anyway 2010-01-19 20:35:41 +00:00
adamdunkels
9d751da8e5 Disable SFD interrupt by default 2010-01-19 13:11:23 +00:00
adamdunkels
acea0afb35 Enable a flag when packet SFD seen 2010-01-19 13:11:01 +00:00
adamdunkels
2772d31ae6 Turn off Timer A before modifying its control registers to avoid problems when timer is updated frequently 2010-01-18 21:17:11 +00:00
nifi
a364213180 IRQ_PORTx is no longer used. Instead returning port number. 2010-01-14 20:05:58 +00:00
nifi
a937f8626c removed files no longer used with new sensor APIs 2010-01-14 18:10:31 +00:00
zdshelby
c5ecde4ca0 Fixes and improvements from Anthony Asterisk 
- First in 8051def.h,  it appears the uip_arch-asm.S file was copied from z80 and am unsure it will work properly.  I modified the 8051def.h to prevent the UIP code from using these routines.
- In dma.c the config routine provides access to all of the DMA channel options, except for the word mode flag.  In order to maintain compatibility with any existing code I created a second routine and converted the original routine into a wrapper routine with a fixed word mode value.
- uart.c::uart0_init was missing blocking access to the higher baud rates.  I am not sure why, so I corrected this.
- I also copied over to header files that provide some useful macros from the msp430 cpu.  The files are lpm.h and hwconf.h.  The lpm.h is for switching power modes, I think.  The hwconf.h has various macros for configuring port I/O.  By porting these files the led/button api's can be ported with minimal modifications.
 2009-12-22 09:28:14 +00:00
matsutsuka
23d5f84a46 Workaround for compiling some examples available 2009-12-16 06:47:17 +00:00
matsutsuka
ebe74fed56 size-optimization option and peep-hole optimizer have been introduced. 
object files have been moved to binary directory
 2009-12-11 14:59:31 +00:00
adamdunkels
9ac4109bad Increased the clock speed to 32768/4 from 32768/8 to provide better accuracy for power profiling of radio CCA checks 2009-12-09 12:55:35 +00:00
adamdunkels
f9260c4fae Enable interrupts during the periodic clock processing to allow rtimers to execute on top of the clock 2009-12-08 23:40:14 +00:00
adamdunkels
a4df6e0fbf Remove the read from TAIV - this should not be done for TIMERA0 interrupts (in fact, doing so messes up the other timer a interrupts, like the clock tick...) 2009-12-08 23:39:45 +00:00
adamdunkels
873f4d0222 Need to clear the interrupt flag register for Timer A 2009-12-07 14:32:16 +00:00
adamdunkels
e3fed27f4a Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files 2009-12-05 19:42:56 +00:00
nifi
efdbbf9fe3 minor cleanup: random.c is already included in Makefile.include 2009-11-19 17:33:05 +00:00
nifi
4f2318152e Added support for CPU speed 2.4576MHz and configuration to enable/disable interrupt driven TX 2009-11-18 15:45:32 +00:00
nifi
2640f9bf26 Must check error flag before reading. Removed leds debug. 2009-11-18 13:24:12 +00:00
adamdunkels
790f2f632a Moved putchar into separate file to make it easier to override its implementation 2009-10-30 15:06:26 +00:00
fros4943
53d03aa924 uart correction values for 3.9Mhz (default sky freq.) 2009-10-27 16:25:28 +00:00
oliverschmidt
fda46f6800 - cc65 2.13. allows to define all necessary paths through the single env var CC65_HOME. 
- cc65 2.13. allows to override the stacksize from the linker command line thus eliminating the need for linker configs maintained by Contiki.
- cc65 2.13. integrates the startup code with the library. In 2.12. the startup code pulled in main(). Now main() is supposed to pull in the startup code. But  if main() resides itself in a library (as with Contiki) then nothing is pulled in at all :-(. The workaround is to pull in main() explicitly through the new option -u (working like the same GCC option).
 2009-10-18 11:34:38 +00:00
oliverschmidt
31eb62821f cc65 2.13. features a default-per-target mouse driver so there's no need to deal with their names in Contiki anymore. 2009-10-18 09:33:08 +00:00
zdshelby
c89b700631 - Fixed the MAC/RF interface problems, now correctly working with sicslowmac. Tested with rf_test_tx and rf_test_rx. Still needs more thorough testing. 
- Corrected a Makefile bug, was complaining about *.d missing
 2009-10-15 12:43:53 +00:00
fros4943
b0291ca5a8 bug fix: wake up MSP430 when leaving rtimer interrupt if the rtimer polled a process. 
thanks to Marco Vedovati for finding the bug
 2009-10-06 09:21:46 +00:00
zdshelby
44a8bc056f - Added mtarch.c and mtarch.h back to /cpu/cc2430. Seems that mt.c needs mtarch.h even though we are not using mtarch right now in this port. 2009-09-29 14:38:51 +00:00
zdshelby
d98026ae03 - Added RF address setup function (byte order may not be correct) 
- Fixed the interrupt and read functions, now receiving one frame correctly
- Improved the send and read functions to work with sicslowmac.c
- TODO: Still a MAC interaction problem. Although the exact same payload is received and sent up to the MAC as is sent, the MAC doesn't do anything with it. Turn on DEBUG in sicslowmac.c to see the problem.
- Removed mtarch files, not used currently
 2009-09-11 08:07:12 +00:00
zdshelby
4a14db6d3a - Fixed a compilation problem caused by 2.3 root Makefile-include changes with regard to sdcc. 
- Fixed a small typo in cc2430_rf.c
- examples/sensinode now compiles
 2009-09-09 07:32:02 +00:00
zdshelby
c9954072c9 Initial commit of cc2430 cpu port files. Currently used by /platform/sensinode. 2009-09-08 20:07:35 +00:00
nifi
c6f7ef84fe Initialize the transmit ringbuffer before enabling TX interrupt 2009-09-08 10:39:49 +00:00
joxe
3e8c63cc09 added radio-makefile for avr + rf230 platforms 2009-09-07 12:05:12 +00:00
joxe
8890904aa2 moved radio specifics out of avr Makefile and added some rs232 defs in order to get MicaZ platform working 2009-09-07 12:02:58 +00:00
adamdunkels
18486d4e3d Patch by Gideon Ernst: use explicit $(CONTIKI) path instead of implicit ../../ path to the mknmlist script 2009-09-03 17:41:58 +00:00
dak664
d2a6637627 Block NS echoback from interface 2009-08-13 18:41:00 +00:00
dak664
d37115f2c0 ipv6 fixes and formatting 2009-08-11 16:06:17 +00:00
oliverschmidt
f930dadf9f There seems no reason for the whole set_ethaddr() thing if uip_setethaddr() doesn't get called after all. 2009-08-09 20:44:42 +00:00
dak664
72d5442e05 wpcap update for uIPv6 2009-08-08 19:51:25 +00:00
dak664
e64b3d8465 Experimental 64 bit Windows 7 drivers. They work with my Phenom. 2009-08-07 16:45:30 +00:00
oliverschmidt
738397b855 cc65 generates dependency files having the list of prerequisites start with a tab character. 
The processing done in the canned command sequence FINALIZE_DEPENDENCY brings this tab character to the beginning of the line making the empty rule look like a command.

Therefore we replace the tab character in question with a blank.
 2009-07-26 21:27:43 +00:00
dak664
283d288f1a Allow hello-world to build, fix makefile ignoring rf230bb 2009-07-26 12:10:38 +00:00
dak664
c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
dak664
7af93463b5 Remove compiler warnings 2009-07-23 16:10:42 +00:00
dak664
c62efce258 Add useful comment, fix compiler warnings 2009-07-17 13:47:10 +00:00
ksb
823bb613f3 STM32F10x headers from FWLib 2009-07-12 16:41:53 +00:00
ksb
baa0dd90c9 STM32F103 port 2009-07-12 15:52:28 +00:00
ksb
030933ee2e OpenOCD configuration for STM32F10xxx 2009-07-12 15:48:55 +00:00
ksb
e3fae627f5 Removed reference to obsolete header. Fixed HALTing when the SCSI handler fails. 2009-07-11 17:34:19 +00:00
ksb
53da57ba60 SCSI definitions 2009-07-11 15:25:43 +00:00
ksb
5a07631752 Common SD-card interface, implementing CFS using EFSL 2009-07-11 15:13:55 +00:00
ksb
2c00620fc8 Missing file 2009-07-11 15:10:40 +00:00
ksb
f2e4500f88 SCSI RBC 2009-07-11 14:50:08 +00:00
ksb
2c029597a1 Common USB functionality 2009-07-11 14:44:27 +00:00
ksb
44a83a12cd USB mass storage class 2009-07-11 14:43:13 +00:00
ksb
c5e62b7205 USB CDC-Ethernet class 2009-07-11 14:37:11 +00:00
ksb
659b3fb7d3 USB CDC-ACM class 2009-07-11 14:30:53 +00:00
ksb
195c23aaa4 printf-style output intended for debugging. Uses less memory and is more flexible than the newlib implementation. 2009-07-11 14:26:28 +00:00
ksb
1f72d3ea32 Moved and updated code for AT91SAM7S 2009-07-11 14:22:45 +00:00
ksb
1658d6b42c Older ELF-loader code, may not work any longer 2009-07-11 14:18:50 +00:00
ksb
4a82069f15 OpenOCD configuration for SAM7S. Should be merged into ../../common/openocd 2009-07-11 14:18:01 +00:00
matsutsuka
c55d3ded6c restored specific compilation option since SDCC seems not supporting -MDD very well 
introduced a snprintf macro as empty function
 2009-07-09 18:26:55 +00:00
dak664
1de298c72a *** empty log message *** 2009-07-08 16:17:07 +00:00
dak664
49989dbe45 Add rf230bb radio driver with conditional make on RF230BB=1 2009-07-08 15:26:17 +00:00
dak664
9aee8dbc16 Fixed bug of no current consequence 2009-07-05 18:50:44 +00:00
oliverschmidt
7a228fea41 Replaced classic approach of generating dependency files via rule with generating them as side effect of generating object files. The issue with "No rule to make target ..." is solved as suggested in http://make.paulandlesley.org/autodep.html. 
At least with gcc (and cc65) the dependency files are generated without an additional run of the C compiler. This is especially beneficial on Cygwin because of the fork() performance issue.
 2009-07-02 22:36:04 +00:00
adamdunkels
00890caca8 Make sure that symbols.c is included in every native cpu build, not just the native target 2009-05-12 17:23:23 +00:00
nvt-se
172ffb74c7 fix compiler warnings. patch from Jesper Karlsson. 2009-04-08 14:56:00 +00:00
nifi
1c6264fddc reordered build path to use cpu files before core 2009-04-06 13:10:14 +00:00
nifi
43c2ccf5d8 fixed clock_seconds to use full 32 bit 2009-04-06 13:08:42 +00:00
nifi
c1d490b6a7 added workaround for memcpy/memset bug in mspgcc 2009-04-06 13:07:37 +00:00
joxe
4f41b30b2b fixed variable names 2009-04-02 22:39:29 +00:00
joxe
7d2a08b29c added initial set-up code SFD capture interrupts usable for exact packet timestamping 2009-04-02 22:23:06 +00:00
adamdunkels
727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels
b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels
0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
fros4943
4275ff4a9c added support for 64-bit architectures, as already added on the cooja mtarch clone (patch provided by Jesper Karlsson and David Gustafsson) 2009-03-13 15:02:23 +00:00
fros4943
da8ee90ef3 reverted last commit (sorry, committed wrong file.. :) 2009-03-13 14:49:10 +00:00
fros4943
d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels
65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
adamdunkels
62ef4002a5 Always prod the watchdog on output to avoid spurious resets during long serial outputs 2009-03-02 22:01:26 +00:00
adamdunkels
6ab7ac0598 Added optional interrupt-based transmission, based on the ringbuf library 2009-03-01 20:40:30 +00:00
oliverschmidt
1585077da7 Adjusted cfs_seek() offset type configuration macro name. 2009-03-01 12:26:53 +00:00
oliverschmidt
d0b7d22229 Adjusted CFS implementations to the recent CFS API changes. 2009-02-28 11:45:35 +00:00
nvt-se
a0226e2418 switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET) 2009-02-27 14:28:02 +00:00
adamdunkels
e34e97cd6f Minor code style fixes 2009-02-24 21:30:20 +00:00
nvt-se
bff9841fbf Removed obsolete definitions. 2009-02-20 23:16:08 +00:00
joxe
80848e4106 added DCO-resync function and default config 2009-02-04 18:28:44 +00:00
joxe
5a8dc2df28 added handling function for checkin if uart is transmitting or receiving - patch by Klaus Stengel 2009-01-31 12:46:57 +00:00
oliverschmidt
3c2662519f Tried to make reference to Microsoft TechNet Forum thread more persistent. 2009-01-15 22:17:47 +00:00
nifi
9bf0dff605 Compile using . instead of separate make rules for .firmware 2008-12-16 13:54:25 +00:00
c_oflynn
5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
joxe
23b7db88d5 moved rtimer from TimerB to TimerA so that TimerB subsystem is free for other uses 2008-12-02 12:44:48 +00:00
c_oflynn
c0e2fd1110 Oops - as pointed out by Daniel Willmann change had a duplicate statement... fixed! 2008-11-29 18:36:12 +00:00
c_oflynn
9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com> 
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
 2008-11-29 15:55:02 +00:00
nifi
2013c4fece Simulator for MSP430-based platforms 2008-11-24 11:09:36 +00:00
fros4943
1fbcfde0d6 implemented support for data argument when starting threads: 
given function is called from a wrapper instead of immediately returned to via the stack
 2008-11-21 10:28:32 +00:00
oliverschmidt
4b268298cc Added infos on Vista loopback connection handling. 2008-11-17 22:38:05 +00:00
oliverschmidt
a844636218 Minor docu update. 2008-11-13 20:26:27 +00:00
c_oflynn
5ff23c0bec Addition of Atmel Radio Control Board (RCB), device in RZ200 kit 2008-11-09 15:39:49 +00:00
c_oflynn
b6e76a4947 Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface 2008-11-08 17:11:18 +00:00
c_oflynn
f13ec95efa *** empty log message *** 2008-11-08 03:29:15 +00:00
c_oflynn
e1463c25a0 Fixed bug that non-IPv6 would hang Jackdaw 2008-11-07 20:32:46 +00:00
c_oflynn
46853d9395 * Channel is saved in EEPROM 
* Allow serial port to work with more term emulators
 2008-10-27 18:03:25 +00:00
c_oflynn
ebb335335a *Added ability to change channel Jackdaw (raven USB) operates on over serial menu 2008-10-26 01:27:55 +00:00
c_oflynn
219846f408 Addition of USB files 2008-10-14 20:16:36 +00:00
c_oflynn
a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
c_oflynn
6e3ee0d917 More updates for raven 2008-10-14 18:38:09 +00:00
c_oflynn
a73ed65dac Fixing more possible out of date files. 2008-10-14 18:37:28 +00:00
c_oflynn
15ba03fea5 Adding updated files 2008-10-14 18:36:07 +00:00
c_oflynn
9cc14d43ef Fixing some files... 2008-10-14 18:35:29 +00:00
julienabeille
2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille
30f545c397 *** empty log message *** 2008-10-14 14:54:23 +00:00
julienabeille
085df124fd tapdev update for uIPv6 2008-10-14 14:38:10 +00:00
julienabeille
632a3585f5 Modification to tapdev for IPv6 support 2008-10-14 09:47:15 +00:00
adamdunkels
cdb6226598 Changes to support the Atmel AVR Raven port 2008-10-14 09:44:12 +00:00
adamdunkels
db7d9bb131 Radio and 802.15.4 MAC code for the Atmel AVR Raven board 2008-10-14 09:43:40 +00:00
nifi
49f57b7848 changed to use unsigned long for seconds counter 2008-10-10 12:36:58 +00:00
joxe
8748230ead changed usart code to handle LPM3 2008-09-18 17:59:27 +00:00
fros4943
b90075ea0a bug fix, msp430 hw bug (undocumented): 
when in continuous/compare mode the interrupt handler may get called before CCR==TR.

behavior observed when the timer is toggled between STOP/CONT in an external interrupt handler (serial input).

possibly this problem may also affect watchdog timer/timer B
 2008-09-16 12:00:48 +00:00
fros4943
3ec170cdf5 added empty mtarch_stop() 2008-08-27 13:10:29 +00:00
oliverschmidt
f822ac9797 Added clock_seconds() implementation. 2008-07-12 14:44:37 +00:00
adamdunkels
fc6d059d24 Added a clock_seconds() function prototype to core/sys/clock.h, that returns seconds in 32 bit format. On platforms like the MSP430, which has a 16 bit native datatype, this cannot be implemented with an interrupt tick that increments a 32 bit value because access is not atomic. Instead, the MSP430 code increments 16 bit seconds value and converts this into a 32 bit value through an offset calculation. If the new value is smaller than the last check, the offset is incremented by 65536. This change also means that CLOCK_CONF_SECOND must be a power of two because a modulo operation is used inside the periodic tick interrupt handler. 2008-07-07 23:38:09 +00:00
oliverschmidt
c9a8eea371 Added cfs_seek to the preprocessor level implementation of the cfs API. 2008-07-06 07:28:05 +00:00
nvt-se
6440c3de81 removed unnecessary inclusion 2008-07-04 03:03:41 +00:00
adamdunkels
62b7ef5173 Moved energest from lib/ to sys/ 2008-07-04 00:02:21 +00:00
adamdunkels
64b6663b11 moved energest from lib/ to sys/ 2008-07-03 23:59:20 +00:00
adamdunkels
871598fb24 Added dummy watchdog.c to allow compiling and running code that calls the watchdog functions 2008-07-03 23:10:25 +00:00
matsutsuka
d194d54e8e CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const. 2008-07-02 15:02:33 +00:00
adamdunkels
7c459c849d The .ihex file use the intermediate Contiki-wide .$(TARGET) target instead of the MSP430-specific .firmware 2008-07-02 14:11:34 +00:00
adamdunkels
66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
matsutsuka
29b17c6933 Modified some glitches in startup code, and introduced additional typedefs required in the current version. 2008-07-02 07:13:22 +00:00
adamdunkels
1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
adamdunkels
2569a8fc69 Removed unused file 2008-07-01 20:59:44 +00:00
adamdunkels
9d7c81d4ed Added missing IPBUF definition needed for IPv6 2008-06-23 19:53:16 +00:00
adamdunkels
d094fe254f Fixed problems with IPv6-enabled Windows XP 2008-06-23 19:52:44 +00:00
oliverschmidt
f6c310d90a I'd better don't try to be smart by including read access into every write access - as the cc65 CBM POSIX file I/O library doesn't allow for both reading and writing at all. 2008-06-16 11:20:22 +00:00
oliverschmidt
456d7ad45e Updated URL. 2008-06-13 20:08:06 +00:00
oliverschmidt
d619b095a9 Added some info on the high-level config macros (and other stuff). 2008-06-12 22:15:50 +00:00
oliverschmidt
929da590be Removed '!' as gnumake already adds '.'. 2008-05-22 19:43:08 +00:00
adamdunkels
31ea41d8db Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level 2008-05-14 19:19:28 +00:00
joxe
57dedee38f enabled ADC IRQs if ADC sensors active 2008-04-25 15:53:55 +00:00
oliverschmidt
b7958e3472 Fixed minor copy&paste issue. 2008-03-29 15:22:39 +00:00
oliverschmidt
3d1d6e333c Added high level config macro for the new compiletime forwarding option. 2008-03-29 15:21:51 +00:00
oliverschmidt
e72ca9e5d4 Allow division by RTIMER_ARCH_SECOND to compile. 2008-03-28 22:38:03 +00:00
oliverschmidt
a500f2dd73 Removed unused variable. 2008-03-04 22:56:54 +00:00
oliverschmidt
a7e73d030a Added naive snprintf support. 2008-02-16 08:56:29 +00:00
adamdunkels
da49b950d4 Count the number of times the watchdog has been stopped to avoid starting it when someone else has stopped it 2008-02-11 10:45:19 +00:00
adamdunkels
660b7f9a78 Initialize watchdog instead of stopping and starting it 2008-02-11 10:44:49 +00:00
oliverschmidt
a685acd23a Turned rtimer_arch_now() from a (one line) function into a macro. 2008-02-09 14:02:12 +00:00
oliverschmidt
604a9c2bf0 Removed (now obsolete) PROCESS_LOADABLE. 2008-02-07 19:56:56 +00:00
adamdunkels
cf5ff2bbb2 Made SLIP code coexist with ordinary serial code. If WITH_UIP=1, the SLIP code is used instead. 2008-02-03 20:59:35 +00:00
adamdunkels
e68d669265 Added improvements suggested by Hardy Greich: define CPU speed in one place only (contiki-conf.h), added nop to XTAL settlement delay 2008-02-03 20:58:11 +00:00
adamdunkels
a4d5ca833c Update the periodic watchdog only if it is not stopped 2008-01-21 10:39:23 +00:00
adamdunkels
f2599b38e7 Added a WERROR variable, which, if set, causes -Werror flags to be turned on 2008-01-17 12:07:32 +00:00
adamdunkels
a46aceb5f8 Added generation of symbols.c if CORE is set 2008-01-08 08:04:41 +00:00
adamdunkels
e16b7ffcf0 Changed the return value of the inpt handler function to int so that it can wake up the CPU from LPM 2008-01-08 08:04:09 +00:00
adamdunkels
7f05b8a5ef Added a reboot function 2008-01-08 08:03:02 +00:00
adamdunkels
b50d2b02ee Reformatting to comply with code style 2008-01-08 08:01:41 +00:00
adamdunkels
345d0a8a79 Added a WERROR definition that can be used to turn -Werror on 2008-01-08 08:01:01 +00:00
oliverschmidt
b96c9deebc Added "usual" comments. 2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21 Introduced yet another high-level config macro. 2008-01-01 19:47:03 +00:00
oliverschmidt
216d20dabb Allow to implement cfs API on preprocessor level using a "pfs" (platform file system) by setting a new high-level config macro. 2008-01-01 17:44:24 +00:00
oliverschmidt
faad65bddd Use cfs filesystem to allow for specific implementations. 2007-12-24 00:13:28 +00:00
oliverschmidt
93ff3add1f Use cfs filesystem to allow for specific implementations. 2007-12-23 15:37:28 +00:00
oliverschmidt
5592b1df6c Implement cfs API on preprocessor level using POSIX functions.. 2007-12-23 15:29:19 +00:00
oliverschmidt
fda38428d9 Introduced some more high-level config macros. 2007-12-23 13:55:38 +00:00
oliverschmidt
14a8cf7200 Made use of the new high-level config macros. 2007-12-23 12:33:57 +00:00
oliverschmidt
125f261b7d Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios. 2007-12-23 12:32:43 +00:00
oliverschmidt
0564cc50fd Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all. 2007-12-21 01:36:01 +00:00
oliverschmidt
102e3e2a24 Make use of fastcall. 2007-12-21 01:13:44 +00:00
oliverschmidt
e4086d8374 Use cfs filesystem to allow for specific implementations (and make use of fastcall). 2007-12-21 01:04:29 +00:00
oliverschmidt
ae4978e994 Moved z80 specific line to z80 makefile. 2007-12-21 00:49:40 +00:00
oliverschmidt
1863f8aef2 Added generic ctk mouse implementation based on cc65 mouse drivers. 2007-12-20 22:47:39 +00:00
oliverschmidt
2c45596f5c Optimized non-logging scenario. 2007-12-20 20:49:59 +00:00
oliverschmidt
14fa993204 Define an empty rtimer_arch_now() macro to keep compiler happy. 2007-12-20 20:28:34 +00:00
oliverschmidt
333ad36a4a Added general ctk support to the cc65 build. 2007-12-16 17:03:27 +00:00
oliverschmidt
f55b3cfe0e So we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 17:02:37 +00:00
oliverschmidt
8644822a34 Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 13:08:09 +00:00
oliverschmidt
805f3f87d3 Make the "empty" error_exit implementation the default to be optionally overridden. 2007-12-16 13:05:23 +00:00
oliverschmidt
b32f0643ab Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well). 2007-12-15 11:04:11 +00:00
oliverschmidt
e59252ab29 Moved stuff into sys subdir to clean up the 6502 dir (and because the corresponding shared stuff is in the sys as well). 2007-12-15 00:14:18 +00:00
oliverschmidt
983688bef6 Use C99 type to typedef Contiki types. 2007-12-15 00:06:27 +00:00
joxe
f997ec6231 fixed defs and to compile for atmega32 also - has no TCNT3 2007-12-11 17:21:14 +00:00
oliverschmidt
2bcabc061d Optimized to work with logging turned off. 2007-12-08 22:34:59 +00:00
oliverschmidt
382603b581 Made error_exit() implementation target-specific. 2007-12-08 22:21:50 +00:00
oliverschmidt
70321f690f Made error_exit() implementation target-specific. 2007-12-08 22:16:43 +00:00
oliverschmidt
4defaddf31 Avoid pulling in the DNS client. Later we'll want to have this configurable. 2007-12-08 21:48:49 +00:00
oliverschmidt
a54195ff04 Fixed to work with logging turned off. 2007-12-08 21:47:26 +00:00
oliverschmidt
69a16d89c5 Fixed typo. 2007-12-08 21:19:06 +00:00
oliverschmidt
a980f40bf6 Take in account that the C64 Retro Replay clockport needs to be activated in order to work with the RR-Net Ethernet card. 2007-12-08 21:05:48 +00:00
oliverschmidt
1afc872a29 cc65 has recently become more restrictive... 2007-12-06 10:36:33 +00:00
oliverschmidt
45988fdfd0 Fixed LAN91C96 driver. 2007-12-01 20:23:11 +00:00
oliverschmidt
9f1feb6e26 Added LAN91C96 driver. 2007-11-30 12:34:08 +00:00
oliverschmidt
66717d11ba Generic SMSC LAN91C96 driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations: 
- ETH64 ($DE10)
- Apple2 LANceGS ($C0x0)
 2007-11-30 12:32:07 +00:00
oliverschmidt
b51a680a02 Minor optimization. 2007-11-29 21:56:55 +00:00
fros4943
3a0ba03407 added experimental avr rtimer-arch implementation 
8 seconds wraparound
 2007-11-29 02:44:05 +00:00
oliverschmidt
394d70c57d Added some info on the 6502 targets. 2007-11-28 18:19:14 +00:00
adamdunkels
95ffdc283e Forgot to remove -Werror 2007-11-28 17:17:19 +00:00
adamdunkels
7e89af8992 Removed -Werror -pedantic and -std=c99 because of problems with compiling under Linux 2007-11-28 17:15:15 +00:00
matsutsuka
80f858b68b typedef uint8_t, uint16_t, and uint32_t have been added to help some sources. 2007-11-28 09:36:06 +00:00
matsutsuka
fbb8fb409a The Micro-Executable Format (MEF) support (experimental). 2007-11-28 06:13:24 +00:00
oliverschmidt
9d39b4be54 Added global error_exit() and config read function to build. 2007-11-27 21:43:32 +00:00
oliverschmidt
6028fccc39 Added read function for a simple binary config file. 2007-11-27 21:42:02 +00:00
oliverschmidt
67af780c93 Made include paths consistent. 2007-11-27 20:54:10 +00:00
oliverschmidt
20824c5603 Make use of global error_exit(). 2007-11-27 20:52:52 +00:00
oliverschmidt
2ef0eec6f6 Made error_exit() globally available. 2007-11-27 18:17:47 +00:00
oliverschmidt
18d591206e Added (default) log implementation for cc65 targets. 2007-11-27 16:48:44 +00:00
oliverschmidt
689e0f077a Added some info on the wpcap driver. 2007-11-27 13:06:55 +00:00
adamdunkels
6e0e6e1279 Removed -Werror since LPM*_EXIT; and friends trigger an internal mspgcc compiler error 2007-11-26 23:23:20 +00:00
oliverschmidt
74c4e10f23 No reason to not just compile petsciiconv.c for all cc65 targets. 2007-11-25 21:43:55 +00:00
oliverschmidt
7fc383e100 Minor change in comment. 2007-11-24 12:57:09 +00:00
fros4943
2564882015 only create full symbols list if SYMBOLS is defined 2007-11-23 06:22:52 +00:00
oliverschmidt
5608e2d451 Minor adjustment to predominant coding style. 2007-11-22 11:41:18 +00:00
oliverschmidt
a2dd620ecc Allow the webserver and telnetd examples to build. 2007-11-22 11:40:17 +00:00
oliverschmidt
da44474fd4 Generic Ethernet driver for cc65 targets. The actual hardware driver is loaded as relocatable module. 2007-11-20 21:10:20 +00:00
oliverschmidt
e6e6ea415c Generic Cirrus Logic CS8900A driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations: 
- C64 TFE ($DE00)
- C64 RRNet ($DE08)
- Apple2 Uther ($C0x0)
 2007-11-19 23:14:14 +00:00
oliverschmidt
9a96dbca03 Moved currently inconsistent files to backyard to clean up for release 2.1 2007-11-19 23:00:33 +00:00
joxe
a4985fd1f7 removed offset in rtimer_arch 2007-11-19 22:38:57 +00:00
ksb
437ba5bbf4 Removed warnings 2007-11-18 12:18:59 +00:00
oliverschmidt
d609db3580 Removed compiler warnings. 2007-11-18 01:36:59 +00:00
oliverschmidt
eabf01903d Replaced most type definitions with reference to stdint.h. 2007-11-17 23:42:23 +00:00
oliverschmidt
b8b6b6239e Allow to build both with Cygwin and VC++. 2007-11-17 21:33:53 +00:00
oliverschmidt
eb3fda68c7 Source reformatting only. 2007-11-17 20:00:42 +00:00
adamdunkels
1e1e44a3f8 Fixed compiler warnings to make code compile with gcc's -pedantic switch 2007-11-17 18:01:00 +00:00
adamdunkels
1070fe19a3 Added rtimer_arch_now prototype 2007-11-17 10:47:22 +00:00
adamdunkels
4ce9b8a33b Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings 2007-11-17 10:37:28 +00:00
adamdunkels
2132462716 Updated to use the watchdog API 2007-11-17 10:28:04 +00:00
adamdunkels
19b7bd9217 Fixed watchdog support for the MSP430. It now works as intended 2007-11-17 10:16:48 +00:00
adamdunkels
22cb35e9f6 Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings 2007-11-17 10:11:58 +00:00
fros4943
53ea3cd7bf removed symbols from .elf output (but always included with .out) 
+ uncommented unused %.ce target (check Makefile.include to enable it)
 2007-11-16 09:19:22 +00:00
adamdunkels
f192211444 Added a hack function called clock_counter() to make the current prototype profiling code run on the MSP430 platform 2007-11-12 21:07:39 +00:00
adamdunkels
585f00a804 Removed old codeprop-tmp.c 2007-11-06 20:35:42 +00:00
fros4943
deeed3389a added dummy RTIMER definition 2007-11-01 16:26:58 +00:00
fros4943
559e3eb6ea removed platform specific definitions 
+
changed default linker to gcc (as for the default linker arguments)
 2007-11-01 16:26:31 +00:00
joxe
7fe87db86a fixed some timer interrupt bugs and reimplemented clock_fine to avoid disabling interrupts 2007-10-04 20:45:29 +00:00
fros4943
5f63995265 support for delayed interrupts 
earlier TACCR1 could be set to already passed time if timer A interrupts was delayed
 2007-10-04 14:14:58 +00:00
matsutsuka
0ab5a22a47 Fixed a minor glitch 2007-10-01 23:04:02 +00:00
matsutsuka
4d6d5eb8ff RS232 support has been unified from just 'dumb' serial line and SLIP support. 2007-09-29 03:58:38 +00:00
matsutsuka
f553789fea Made unnecessary symbols static. 2007-09-29 03:57:39 +00:00
matsutsuka
1e6ac84151 Customized crt0 has been introduced to fix some SDCC glitches. 2007-09-29 03:57:07 +00:00
matsutsuka
8d5e863b9a File names are changed. 2007-09-19 12:48:26 +00:00
matsutsuka
c99b7dc827 status has been added for polling function. 2007-09-19 12:47:19 +00:00
matsutsuka
eb39a24ad8 Char bug seems to be fixed in the newer version of sdcc. 2007-09-19 12:44:01 +00:00
matsutsuka
7b402d38f8 The suffix for preprocessed assembler file has been changed from ".hS" to ".cS" 2007-09-19 12:41:33 +00:00
nvt-se
1d4db3e2cc The function was missing the case when the stack was used completely, 
and didn't return a value then.
 2007-09-14 20:21:01 +00:00
matsutsuka
c258a2e83a library extension has been modified form .o to .a 2007-09-11 12:11:38 +00:00
matsutsuka
cce43c2efc Baud-rate has been added to the architecture-depend initialization. 
Enabled packaged buffer reading.
 2007-09-11 12:03:20 +00:00
matsutsuka
cd971ff8cc sdcc-custom-rule has been added to makefile.z80 2007-09-10 15:09:28 +00:00
matsutsuka
fe980b4445 Comment and include files are slightly changed for readablility. 2007-09-09 13:41:50 +00:00
matsutsuka
259c5a00b9 Some gliches and filenames are changed regarding RS-232C driver. 2007-09-09 13:41:15 +00:00
matsutsuka
c58e4f94b8 Screen-bsae logging implementation. 2007-09-09 12:23:03 +00:00
matsutsuka
17da4a73be Not signal but polling-based rs-232c process. 2007-09-09 12:22:34 +00:00
matsutsuka
91a57c89ba VRAM based default implementation of libconio_arch. 2007-09-09 12:21:54 +00:00
matsutsuka
f9a01d6282 strcasecmp is moved to lib directory 2007-09-09 12:20:59 +00:00
matsutsuka
88c30a63a5 Directory of some sources files has been moved. 2007-09-09 12:20:12 +00:00
matsutsuka
efbe8ab536 renamed contiki-sdcc-conf.h to z80def.h in order to follow the convention of cpu-dependent configuration header file name. 2007-09-07 04:59:06 +00:00
nvt-se
b4f3ab5af7 Added support for configurable callbacks of uart1 input. 2007-09-06 11:45:08 +00:00
matsutsuka
d44a1e97e6 int32_t typedef is added to make compatibility with rand.c 2007-09-06 01:41:05 +00:00
matsutsuka
582a7476d4 *-dsc.c files have been changed to remove forward reference for struct_icon variable, bacause it is strange that this variable is used wholly inside the C source file and declared extern for the forward reference. 2007-09-06 01:36:10 +00:00
oliverschmidt
89e81f9eed Renamed 6502-conf.h into 6502def.h to be in line with similiar files created in the meanwhile and added C99 names. 2007-09-05 10:59:10 +00:00
joxe
aaae9f4cf8 removed redundant code - configuration of basic clock subsystem in clock and rtimer_arch 2007-09-03 19:22:37 +00:00
matsutsuka
4766593ff7 Add assembler checksum calculation support for z80 port. 2007-09-01 11:14:50 +00:00
ksb
af9bf1810c The file is generated from string-descriptors.xml, but since it probably won't change and not everyone has xsltproc I'm putting it in CVS. 2007-09-01 10:12:54 +00:00
ksb
9d5a2aed80 Added USB (specifically CDC-ACM) support 2007-09-01 10:00:35 +00:00
matsutsuka
3af69d229a Added some comments. 2007-09-01 01:09:25 +00:00
matsutsuka
cc2b6e58d7 Followed a coding convention of contiki, in which cast operation should not be followed by a space char. 2007-09-01 01:08:07 +00:00
oliverschmidt
34af8fbc1a Fixed recent change. 2007-08-30 20:47:14 +00:00
matsutsuka
9d4fc0a1a8 Support for z80(sdcc) port. 
In order to support, some core modules are modified as follows:

core/sys/dsc.h
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.
- DSC_HEADER is changed to remove extra semicolon.

core/sys/process.h
- process_data_t is expressed by void* in signatures (known bug on sdcc).

core/sys/autostart.h
- autostart_processes is changed to remove extra semicolon.

core/sys/cc.h
- CC_CONF_ASSIGN_AGGREGATE is introduced.
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
  of sdcc bug for an increment.

core/net/hc.c
core/net/uip_arp.c
core/net/uaodv.c
- Aggregation assignments are changed to uip_ipaddr_copy.

core/net/psock.c
core/net/uipbuf.c
core/net/dhcpc.c
apps/shell/shell.c
core/ctk/vnc-server.c
core/ctk/vnc-out.c
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

core/net/uip-over-mesh.c
- An extra semicolon is removed.

apps/dhcp/dhcp-dsc.c
apps/shell/shell-dsc.
apps/ftp/ftp-dsc.c
apps/process-list/process-list-dsc.c
apps/email/email-dsc.c
apps/webserver/webserver-dsc.c
apps/vnc/vnc-dsc.c
apps/vnc/vnc-viewer.h
apps/webbrowser/www-dsc.c
apps/about/about-dsc.c
apps/irc/irc-dsc.c
apps/telnet/telnet-dsc.c
apps/telnetd/telnetd-dsc.c
apps/netconf/netconf-dsc.c
apps/directory/directory-dsc.c
pps/calc/calc-dsc.c
- Modify an extern type to a real declaration, which is static
  to prevent a compile error.

core/net/mac/xmac.c
- Variables cannot be defined in a head of block on sdcc.

core/ctk/ctk.h
core/ctk/ctk.c
apps/program-handler/program-handler.c
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.

Makefile.include
- Add a set of configuration for an assembler.
- $(CLEAN) variable is introduced for customized cleanup.

apps/process-list/process-list.c
- PROCESSLIST_CONF_HEIGHT is introduced to address smaller screen size.

core/lib/ctk-filedialog.c
- FILES_CONF_HEIGHT is introduced to address smaller screen size.
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

apps/vnc/vnc-viewer.c
- A cast is added to prevent a compile error.
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

apps/webbrowser/webclient.c
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
  of sdcc bug for an increment.

core/loader/elfloader.c
- A cast is added to prevent a compile error.

core/net/rime/rimeaddr.c
- An initialization is added to prevent a compile error.

core/net/rime/rudolph0.c
- NULL is changed to 0, because NULL causes a compile error.

core/net/rime/route-discovery.c
- Add an argument to match the definition of nf_callbacks.

cpu/z80/strcasecmp.h
cpu/z80/strcasecmp.c
cpu/z80/contiki-sdcc-conf.h
cpu/z80/mtarch.c
cpu/z80/mtarch.h
cpu/z80/Makefile.z80
- New files to make compilation availble on sdcc.
- Added support for multithreading.
 2007-08-30 14:39:16 +00:00
ksb
792eae91c6 rtimer implementation (not well tested) 
sprintf that use strformat, so there's no need to pull in the newlib
implementation.
Build system improvements.
 2007-08-21 09:03:55 +00:00
bg-
0fedf8845d * Standard defines for AVR. 2007-08-16 13:20:09 +00:00
bg-
dcafdfe51a * Standard defines for MSP430. 2007-08-16 13:09:06 +00:00
oliverschmidt
63a6493e5c Made tapdev and wpcap driver similiar making up a "driver template". 2007-08-10 14:59:59 +00:00
oliverschmidt
1c77f6f1d5 - The cc65 assembler variable 'ptr1' (a general zero page pointer) is actually part of the cc65 zero page area so it's a bad idea (tm) to use it in swapping that very area. 
- The cc65 assembler variable 'sp' (the pointer to the C stack) is actually part of the cc65 zero page area so there's no need to manage it explicitly. Furthermore it is known to reside at the very start of the area so it can be initialized there for new threads.
 2007-08-10 10:45:35 +00:00
oliverschmidt
9399718ede Cosmetic change... 2007-05-29 22:25:49 +00:00
oliverschmidt
b23f4fc89d Added a Contiki clock_time() implementation based on the cc65 clock() implementation. 2007-05-29 21:56:21 +00:00
oliverschmidt
c874d56f32 Clock implementations are typically not located in a lib subdirectory. 2007-05-27 21:29:18 +00:00
oliverschmidt
75f04995a9 Changed packet drivers from services to plain processes. 
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.

Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
 2007-05-26 23:05:36 +00:00
oliverschmidt
6ab3a6d1e3 Fixed copy&paste bug. 2007-05-26 22:51:38 +00:00
oliverschmidt
f0d5a14745 Moved into backyard as it was never ported to Contiki 2.x. 2007-05-26 21:28:30 +00:00
adamdunkels
2c53a38075 Architecture dependent code for the CC2420 driver 2007-05-25 08:07:54 +00:00
oliverschmidt
9ab8b78381 Moved cc65 loader requiring "labels hack" into backyard. 2007-05-23 23:49:45 +00:00
oliverschmidt
a22c543b1a Moved cc65 specific app into backyard. 2007-05-23 23:47:16 +00:00
oliverschmidt
1629c207b5 That PROCESS_EXITHANDLER() thing was after all kind of overengineered... 2007-05-23 22:13:29 +00:00
oliverschmidt
0bf8c95b79 Made use of exit handler. 2007-05-22 22:01:03 +00:00
adamdunkels
00b1e371cf Added energy estimation, disabled IRQs for A/D converting as it used close to 100% CPU time 2007-05-22 21:01:32 +00:00
adamdunkels
3872d004bc Reading timer now quicker, embryo for possible future drift configuration 2007-05-22 21:00:09 +00:00
adamdunkels
432d242a3c Added energy estimation, embryo for possible future drift configuration 2007-05-22 20:59:47 +00:00
adamdunkels
9a5bac6282 Added energy estimation 2007-05-22 20:59:11 +00:00
bg-
3f4ec3cf44 * Use _end rather than nonstandard __bss_end. 2007-05-21 15:29:46 +00:00
bg-
d68e4bd3df * Add missing file. 2007-05-21 14:28:14 +00:00
oliverschmidt
5f3296e943 Changed packet drivers from services to plain processes. 
Now tcpip_output() is a function pointer that is supposed to be set via the macro tcpip_set_outputfunc(). Packet drivers do so on process startup.

Thus if there are several packet drivers in a Contiki system the one started last is the one actually used. This behaviour is especially useful for the 'IP forwarding' "meta" packet driver.
 2007-05-20 21:29:39 +00:00
oliverschmidt
61f54204d7 Improved map file naming consistency. 2007-05-19 21:46:43 +00:00
oliverschmidt
51509fa49a Added dummy value to allow for building. 2007-05-19 13:20:37 +00:00
oliverschmidt
ae2073cac9 Factored out setup directory search path for source files into Makefile.include. 
- All compilers used support the -I option for setting an include search directory.

- The Contiki source tree follows the (common) approach of placing declarations (in headerf iles) in the same directory as definitions (in source files).

As a result it makes sense to use the -I compiler option for just the same set of directories used for the vpath gnumake directive.

Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
 2007-05-19 07:54:53 +00:00
adamdunkels
4364a9929a Removed WITH_UIP 2007-05-15 08:09:45 +00:00
oliverschmidt
237b1617b5 Factored out setup directory search path for source files into Makefile.include. 
- Search target specific directories before CPU specific directories.
- Search CPU specific directories before generic directories.

Note: I checked several builds but nevertheless one or the other might need some additional adjustsments. Sorry for the inconvenience.
 2007-05-13 08:41:11 +00:00
oliverschmidt
4fd1e3ece0 Added signed 32 bit data type. 2007-05-12 20:58:12 +00:00
oliverschmidt
8d3496194f Added Multithreading support to the cc65 targets based on the Contiki 1.x C64 implementation with the following changes: 
- Added support for the function parameter.
- Removed support for preemption because:
  - No other current implementation does so.
  - Preemption support would make the code at least target-dependent or it wouldn't work at all (as on plain Apple2 machines without timer interrupt).
 2007-04-21 22:15:45 +00:00
oliverschmidt
ec2411d5ea Structured the cc65 makefile like all the other makefiles in the Contiki 2.x build system. 2007-04-21 15:04:23 +00:00
oliverschmidt
5d62bbd039 Used SED to replace the assembler sources with the objects in the dependency file generated by the cc65 compiler. This allows to hide the assembler sources from GNU make which solves several issues. Now the cc65 toolchain behaves very similiar to gcc from the GNU make perspective. 2007-04-21 13:23:47 +00:00
oliverschmidt
48977bd89f Replaced the PROJECT_OBJECTFILES hack with puting the Contiki library (containing contiki-main.o) and the cc65 libary into a cc65 "library group" which allows mutual crossreferences between the libraries in the group. 2007-04-18 22:52:22 +00:00
oliverschmidt
f3502e2ca4 Added NOP headers in order to allow build. 2007-04-18 21:38:55 +00:00
oliverschmidt
c7e8ac499e Consistently use curly brackets for function calls (and add the same disclaimer as used in "my" other makefiles). 2007-04-14 15:55:50 +00:00
oliverschmidt
9cf544c45e Added the same disclaimer as used in the header file. 2007-04-14 15:48:42 +00:00
oliverschmidt
274afdb55c Made driver compilable with both Cygwin and VC++ (and usable for platform/win32 by using logging API). 2007-04-11 00:21:28 +00:00
oliverschmidt
9cc1871810 Fixed stupid bug. I have no idea how I didn't run into this one for months ! The development platforms have 400-600 bytes buffer size. So every incoming 1500 packet overwrote ~ 1000 bytes of uIP variables. And this happens very easily as every packet coming in for the Windows IP stack is seen by uIP as well (and discarded because of the wrong IP address). 2007-04-08 20:06:56 +00:00
adamdunkels
b2b750e83b rtimer_arch_now() now returns the correct value 2007-04-07 05:45:08 +00:00
oliverschmidt
e37d79e4a3 Don't rely on gcc's auto-import feature. 2007-04-07 00:27:22 +00:00
oliverschmidt
e5d3453a79 Minor code formatting change. 2007-04-05 19:42:47 +00:00
oliverschmidt
be08e76366 Now that Contiki has a htonl() we need the same workaround here that we already have for htons(). 2007-04-05 19:41:02 +00:00
bg-
8aa34f1ea4 * remove author. 2007-04-04 11:53:07 +00:00
adamdunkels
08d825c450 Added rtimer-arch.c 2007-04-03 19:05:13 +00:00
adamdunkels
b108ca702a Fixed description 2007-04-03 19:04:27 +00:00
adamdunkels
00645113e5 MSP430 real-time rtimer support using timerb1 2007-04-03 19:03:09 +00:00
oliverschmidt
d41c0671d9 Ooops, that was one level of indirection to much. 2007-04-03 18:37:15 +00:00
oliverschmidt
aa4434ca55 CPU agnostic implementation of the platform specific part of the multi-threading library. Uses fibers on Windows and the ucontext functions on other platforms. 2007-04-03 00:40:51 +00:00
joxe
8add3d4660 corrected comments 2007-04-02 16:32:20 +00:00
oliverschmidt
5bceecfbb0 Added Cygwin networking support using WinPcap. 2007-04-01 21:05:17 +00:00
oliverschmidt
01b9b31952 Moved wpcap*.[ch] from platform/minimal-net/net to cpu/native/net. 2007-04-01 20:39:05 +00:00
adamdunkels
e6301c6221 Moved tapdev*.[ch] from platform/netsim/net and platform/minimal-net/net to cpu/native/net 2007-03-31 18:49:37 +00:00
adamdunkels
c4300e8e8d Added #include that #defines NULL 2007-03-31 11:19:08 +00:00
adamdunkels
92e5e7a13c Removed clock_delay() 2007-03-29 23:43:59 +00:00
adamdunkels
7db75a8aa6 x86 elfloader 2007-03-28 20:27:13 +00:00
adamdunkels
7f4014ca4d Preliminary implementation of the rtimer architecture functions for the native CPU 2007-03-28 20:09:09 +00:00
adamdunkels
fbd01ee50b Added native CPU to avoid reliance on x86-specific code for the native and netsim platforms 2007-03-28 20:07:57 +00:00
adamdunkels
d2683224e9 Added clock_delay() between characters to avoid dropping them 2007-03-25 21:52:41 +00:00
adamdunkels
6a8d8e3abf Added experimental clock_fine() function 2007-03-25 21:51:31 +00:00
nifi
f0ce3a5292 Moved buildscripts from cpu/msp430 to platform/esb. 2007-03-23 16:19:41 +00:00
adamdunkels
8293e6215f Added elfloader-stub, symbols generation 2007-03-22 23:58:08 +00:00
adamdunkels
199e0cb30d Added NM definition 2007-03-22 23:57:33 +00:00
adamdunkels
011306ce54 LPM4_EXIT instead of LPM_AWAKE() 2007-03-21 23:23:43 +00:00
ksb
7c8665fb89 Padded struct codeprop_tcphdr to 4 bytes, to get around different 
alignment on different platforms.
 2007-03-18 13:15:00 +00:00
adamdunkels
b0b3e5d0d6 Redefined LD to gcc to make things compile. Removed generation of symbols.[ch] due to problematic builds (seemingly neverending loops). 2007-03-15 21:52:00 +00:00
adamdunkels
5a5313aa80 Added uip include and asmv definition to make it compile 2007-03-15 21:51:12 +00:00
adamdunkels
8f9aa7b2f7 Moved uip_ipchksum() into a separate file to allow the Tmote Sky port to be compiled entirely without uIP 2007-03-15 21:47:45 +00:00
adamdunkels
b7107c0eea Added uart1.c and the dev/ subdirectory 2007-03-15 21:46:43 +00:00
adamdunkels
329bb14d94 +copyright header 2007-03-15 21:39:23 +00:00
adamdunkels
36c17d22d0 uIP checksum calculation for MSP430 2007-03-15 21:38:46 +00:00
adamdunkels
c1df2e6df8 MSP430 definitions 2007-03-15 21:38:22 +00:00
adamdunkels
1fbc0aa5b7 UART1 driver 2007-03-15 21:37:19 +00:00
adamdunkels
574becc10e Interrupt arbitration for sensor drivers 2007-03-15 21:37:01 +00:00
ksb
b105b40e9a Added ELF-loader code, should probably eventually end up in core/loader. 
Added some replacements for newlib's stdout.
Added missing startup code.
Some minor fixes.
 2007-03-07 16:07:25 +00:00
oliverschmidt
5d2f948bba Allow to build the statically linked telnet-server and webserver examples using cc65. 2007-03-03 13:38:07 +00:00
oliverschmidt
73fabe4ba3 Factored out settings specific more to architecture and/or toolchain rather than specific target. 2007-03-03 10:05:03 +00:00
oliverschmidt
97681fdada The one and only uip_arch.h resides in core/net. 2007-03-03 09:48:39 +00:00
ksb
13af443115 CPU specific files for the AT91SAM7S ARM-based microcontrollers 2007-02-24 00:09:45 +00:00
bg-
429d41defd * General stuff for different baudrates: 
- ubr argument to slip_arch_int

    - macros for calculating ubr

    - argument -Bbaudrate to tools tunslip and scat
 2007-02-02 13:26:48 +00:00
bg-
2918e5ae20 SLIP for AVR on UART1 2007-02-02 13:13:16 +00:00
bg-
6257bb670b Rename cc2420_uart0.c to cc2420_spi.c 2007-02-01 14:46:07 +00:00
bg-
394992b99f * Workaround for bug in msp430-ld where __bss_end is sometimes 
misaligned.

* Indent trailing brace properly.
 2007-01-30 20:01:45 +00:00
bg-
a3fc32318e * Generic AVR stuff. 2007-01-25 18:24:29 +00:00
bg-
20fa9351f2 * First port of CC2420 driver to the AVR. 2007-01-25 18:22:55 +00:00
bg-
8ebe0466a0 * Defines for 8MHz cpus. 2007-01-25 17:55:13 +00:00
bg-
6dea7b68d1 * Fill clock_delay with something (needs rewriting). 2007-01-24 16:28:51 +00:00
adamdunkels
83b348631f Changed the generation of symbols to the mknmlist script. Now symbols.h is not automatically generated so we can use it as a normal include file and remove symbols-def.h. 2007-01-24 16:11:48 +00:00
bg-
6bb9d0fa04 * Missing volatile. 2007-01-23 12:24:35 +00:00
oliverschmidt
ef8ae0e158 Added an initial Makefile for the cc65 tool chain (www.cc65.org). For now it allows to build the statically linked hello-world example. 2007-01-03 10:26:40 +00:00
oliverschmidt
69492ff4ea Removed Contiki 1.x makefiles to avoid confusion on understanding the (already complex enough) Contiki 2.x build system. 2006-12-31 14:30:11 +00:00
oliverschmidt
6c4bcfb86f Moved 6502-specific implementation of local continuations into a 'sys' folder in order to allow the 
#include "sys/lc.h"

in core/sys/pt.h to find it.
 2006-12-31 14:26:02 +00:00
barner
5d6abc4cfe Provide dummy implementations for the leds and minileds module in order 
to unbreak the build.
 2006-12-22 17:05:31 +00:00
barner
9735acb03f - Re-implementation of timing facility using timer0 and the internal clock 
source. Using an external clock source (esp. the real-time clock) did not
  work. This  might as well be a local problem (e.g. hardware).
- Provide some dummy implementations in order to fix the build.
 2006-12-22 17:04:38 +00:00
barner
6eb200cfc1 Fix build: location of eeprom.h changed. 2006-12-22 17:02:24 +00:00
barner
45cbcde797 - Fix/enhence support for RS232 interface on AVR (ATMega128): 
* support for multiple ports: (extended interface with 'port' parameter)
 * new function: rs232_redirect_stdout that allows you to redirect stdout
   to a serial port
- In order to implement support for other MCUs, adopt a copy of
   rs232_atmega128.h
 2006-12-22 17:00:45 +00:00
barner
86f37e7c1b AVR specific implementation of contiki multi-threating architecture 
(supporting per-thread stacks).
 2006-12-22 16:55:53 +00:00
barner
265f45feba - Fix build of contiki-2.x AVR port. 
- Generate symbol tables for loadable modules.
 2006-12-22 16:54:36 +00:00
adamdunkels
bdb317274e Added generation of symbols.[ch], removed cfs-eeprom (should be in platform makefile instead) 2006-12-19 09:22:25 +00:00
adamdunkels
2e8431b3d9 Added generation of symbols.[ch] 2006-12-19 09:21:12 +00:00
fros4943
93714fc39f updated reference to "elfloader-tmp" 2006-12-18 15:17:47 +00:00
adamdunkels
5d3baef0d2 Removed old elfloader.c and replaced with the current code (previously in elfloader-tmp.c) 2006-12-18 11:45:47 +00:00
bg-
290489ac10 * Bump speed over serial to 115200 (Tmote sky only). 2006-12-01 15:07:49 +00:00
bg-
e9b0d2fe7c * Remove printfs. 2006-12-01 15:06:42 +00:00
bg-
a8c35677bd * Obob in cur_break initialisation. 2006-11-17 13:30:45 +00:00
joxe
6c59ef668f added SELECT_IO and SELECT_PM macros 2006-10-10 21:33:26 +00:00
adamdunkels
b04edbebb3 CFLAGS contain nodeid if it is defined 2006-10-09 09:15:48 +00:00
adamdunkels
bf5b90d764 Removed generation of node-id.c file since node ID now is stored in EEPROM 2006-10-09 09:13:23 +00:00
joxe
e49539eea9 removed old node id management from makefile 2006-10-09 09:12:46 +00:00
bg-
752fa92657 Minimalistic plug in replacement for the leds package. 2006-09-27 09:32:08 +00:00
adamdunkels
e072e4084a Added a function for measuring stack usage 2006-09-26 20:56:42 +00:00
adamdunkels
80a7d1fba2 Added mtarch.c 2006-09-01 22:56:26 +00:00
adamdunkels
2ab93b730f Fixed include path 2006-09-01 22:56:18 +00:00
adamdunkels
fbcb4a97c2 Made stacksize configurable via external definition 2006-09-01 22:56:02 +00:00
bg-
157ee59ff5 Obob bug spotted by nfi. 2006-08-25 09:40:21 +00:00
bg-
20bac141ca Use LPM4_EXIT to return from sleep on msp430. 2006-08-17 15:41:13 +00:00
bg-
b065b27759 * Deal with numerical overflows. 2006-08-17 15:25:46 +00:00
bg-
0bf3db5df7 Make malloc machine independent by relying on dependent sbrk(2). 2006-08-11 13:41:31 +00:00
adamdunkels
8ee4f7fc3d Removed out-commented stuff from Makefiles 2006-06-24 06:23:47 +00:00
nifi
c649818fe5 fix to allow projects to extend the linker flags 2006-06-22 14:24:49 +00:00
nifi
05f6bb5feb Import of the contiki-2.x development code from the SICS internal CVS server 2006-06-22 14:22:42 +00:00
adamdunkels
62e32d2b23 Added missing includes and made Ethernut 1 & 2 ports to compile again 2006-06-20 21:23:09 +00:00
adamdunkels
710b372a2d AVR makefile 2006-06-18 07:44:59 +00:00
adamdunkels
c9e808d638 Import of the contiki-2.x development code from the SICS internal CVS server 2006-06-17 22:41:10 +00:00