giomba/nes-proj
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
12,984 Commits 1 Branch 0 Tags 92 MiB
cbecd8c122
Commit Graph

1533 Commits

Author SHA1 Message Date
George Oikonomou
ac2dcb8b03 Add sensniff example Makefile 2016-08-12 15:58:02 +01:00
George Oikonomou
4922925c07 Add sensniff support: ev-aducrf101mkxz 2016-08-12 15:58:02 +01:00
George Oikonomou
166f90e4df Add sensniff support: zoul 2016-08-12 15:58:02 +01:00
Yasuyuki Tanaka
8bca703282 Remove RPL_CONF_WITH_NON_STORING definition 2016-08-12 14:05:14 +02:00
George Oikonomou
d8fcaf9dec Add sensniff support: z1 2016-08-12 01:23:51 +01:00
George Oikonomou
3cebc42a2a Add sensniff support: cc13xx/cc26xx 2016-08-12 01:23:51 +01:00
George Oikonomou
525bafcc3c Add sensniff support: openmote-cc2538 2016-08-12 01:23:51 +01:00
George Oikonomou
63941d849a Add sensniff support: jn516x 2016-08-12 01:23:51 +01:00
George Oikonomou
690c299bb0 Add sensniff support: cc2538dk 2016-08-12 01:23:51 +01:00
George Oikonomou
1e6730758d Add sensniff support: cc2530dk 2016-08-12 01:23:51 +01:00
George Oikonomou
c5a3a4e05e Add off-the-shelf sensniff drivers 
Can be re-used by any platform that uses any of those CPUs
 2016-08-12 01:23:51 +01:00
George Oikonomou
a8dcb6566e Add sensniff example core files 2016-08-12 01:23:51 +01:00
George Oikonomou
63417cba0e Remove legacy zoul/CC1200 sniffer example 2016-08-12 01:23:50 +01:00
George Oikonomou
32e4f0f432 Remove legacy CC2538 sniffer example 2016-08-12 01:23:50 +01:00
George Oikonomou
fa769b98e9 Remove legacy CC2530 sniffer example 2016-08-12 01:23:49 +01:00
Simon Duquennoy
21387b954f Merge pull request #1493 from simonduq/pr/add-missing-ext-hdr 
Insert RPL ext header before sending ICMP, UDP and TCP messages
 2016-07-25 14:56:25 +02:00
Simon Duquennoy
ff5a4751c8 Merge pull request #1610 from simonduq/pr/tsch-rime 
TSCH with Rime
 2016-07-25 14:55:37 +02:00
Sumankumar Panchal
6dfd358821 TSCH port for CC2538 based platforms. 2016-07-22 09:38:25 +05:30
George Oikonomou
94413f99fe Shrink ND cache and routing table for the CC26xx web demo 2016-07-17 01:31:21 +01:00
George Oikonomou
9839b91be5 Enable the ROM bootloader in our examples 2016-07-17 00:26:52 +01:00
Nicolas Tsiftes
afa8125913 Merge pull request #1777 from herjulf/master 
Fix README.md not reference GPL
 2016-07-15 20:30:06 +02:00
Robert Olsson
fbf3daa564 Fix README.md not reference GPL 2016-07-15 17:44:20 +02:00
Antonio Lignan
d5e2a779d4 Added DHT22 sensor to Zoul-based platforms 2016-07-04 18:00:09 +02:00
Simon Duquennoy
7a1576815e rpl-tsch example: use RPL non-storing mode 2016-06-30 18:15:23 +02:00
Simon Duquennoy
3e987ec138 Border router: include RPL links in HTTP reply when non-storing mode is enabled 2016-06-29 17:07:00 +02:00
Yasuyuki Tanaka
ca3a4726d1 Rename two macros related to multicast, which are not user configuration 
- UIP_CONF_IPV6_MULTICAST -> UIP_IPV6_MULTICAST
- RPL_CONF_MULTICAST      -> RPL_WITH_MULTICAST
 2016-06-20 16:35:09 +02:00
George Oikonomou
4b67e21d2e Merge pull request #1714 from alignan/pull/add-relay 
Added generic relay driver for the zoul-based platforms
 2016-06-13 19:45:46 +01:00
Sumankumar Panchal
373fda46f7 TSCH port for Zolertia ReMote/Zoul. 2016-06-12 16:37:01 +05:30
Simon Duquennoy
809883e632 Making example tsch-rime more flexible 2016-06-10 20:59:40 +02:00
Simon Duquennoy
78f04fda83 Added example of TSCH used with Rime 2016-06-10 20:58:57 +02:00
Antonio Lignan
092f0e62fe Added generic relay driver for the zoul-based platforms 2016-06-09 15:53:25 +02:00
Simon Duquennoy
b32b3f6666 RPL non-storing: add compile-test to also check for warnings 2016-06-08 14:03:22 +02:00
Simon Duquennoy
1a7133bbf2 Simplified configuration of RPL non-storing mode 2016-06-08 14:03:21 +02:00
Simon Duquennoy
2fe2a28439 Make some of the rpl examples configurable in non-storing mode 2016-06-08 14:03:10 +02:00
Antonio Lignan
ee0b02c819 Merge pull request #1684 from g-oikonomou/contrib/cc26xx/aux-ctrl-and-adc 
Add CC13xx/CC26xx AUX controller module, ADC support, ALS driver and example
 2016-06-07 14:36:28 +02:00
Antonio Lignan
b3faefe602 Merge pull request #1433 from mdlemay/x86-mm 
X86 memory management
 2016-06-05 13:49:49 +02:00
Simon Duquennoy
6c946319d9 Merge pull request #1667 from alignan/pull/at-driver 
AT driver (master) and example
 2016-06-04 22:47:24 +02:00
Simon Duquennoy
64679642f2 Saving ROM and RAM 2016-06-03 16:44:06 +02:00
Simon Duquennoy
5097842cba Merge pull request #1688 from tsparber/fix-rssi-scanner 
Fixed rssi-scanner example
 2016-06-03 10:12:02 +02:00
Simon Duquennoy
3c9593f3ab Merge pull request #1692 from pablocorbalan/unicast-sent-cb 
RIME: Extend unicast example to include a sent callback.
 2016-06-03 10:10:36 +02:00
Simon Duquennoy
26bf33c762 Merge pull request #1550 from thomas-ha/tsch-cc2538-port 
Port of TSCH for CC2538
 2016-06-02 21:33:55 +02:00
Antonio Lignan
acf13a4e0d Merge pull request #1606 from OpenMote/master 
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
 2016-06-01 23:15:27 +02:00
Antonio Lignan
9e1c378919 Merge pull request #1469 from wbober/nrf52dk-pr 
Add support for nRF52 DK platform
 2016-06-01 23:11:39 +02:00
Pablo Corbalán
101575fbe2 RIME: Extend unicast example to include a sent callback. 
This PR simply adds a packet sent callback to the unicast connection used in the example. Every time a packet is sent the callback is called and prints the linkaddr_t dest, the MAC status of the message sent, and the link layer number of transmissions of the packet. This can be used to compute link quality estimations.
 2016-06-01 00:35:49 +01:00
Benoît Thébaudeau
5b3432547e cfs-coffee: examples: Add support for CC2538 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-06-01 00:19:52 +02:00
Benoît Thébaudeau
6df2b91a31 test-coffee: Fix the garbage collection test 
This test could sometimes fail because of a lack of free contiguous
pages in the file system. Fix this by removing the created files at the
end of each test. Besides, the test files do not have to be removed at
the beginning of each test since the file system is initially formatted.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
003b4b0d63 test-coffee: Fix the file modification test 
The r variable was used instead of i to fill the buffer, resulting in
the end of the test loop after only a single iteration. The file was not
even closed at the end of each iteration although it is opened at the
beginning of each iteration, so the available file descriptors would
very quickly be exhausted.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
150b9fbd8b test-coffee: Fix test filenames 
The filenames were mixed up between some of the tests, thus breaking the
purpose of these tests.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
76429e4f0e test-coffee: Fix numbering of test failure cases 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
5d227b92a3 test-cfs: Fix possible test failure after reboot 
Remove the file at the beginning of the test, before opening it for
writing, in order to start the test with an empty file system, not only
after flashing the test, but also following every reboot.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-05-30 23:05:12 +02:00
Antonio Lignan
e23c175699 cfs-coffee: examples: Fix coding style 2016-05-30 23:05:12 +02:00
Antonio Lignan
4ed5c50a4e Make CFS and Coffee examples platform-independent 
Move the CFS and Coffee examples from sky to a common cfs-coffee folder
in order to have unified examples for multiple platforms.
 2016-05-30 23:05:12 +02:00
Antonio Lignan
334e38339e
Fixed rssi-scanner example 2016-05-30 10:53:20 +02:00
George Oikonomou
5a39df1439 Demonstrate ALS support in the CC26xx demo 2016-05-29 15:05:13 +01:00
George Oikonomou
c5bea81bb6 Merge pull request #1530 from herjulf/avr-rss2 
Adding AtMegaXXRFR2 support and avr-rss2 platform
 2016-05-15 20:38:50 +01:00
Antonio Lignan
2b30370b42 AT driver (master) and example 2016-05-15 12:19:04 +02:00
Robert Olsson
d331d39e93 Correct paths when moving examples for regession tests 2016-05-14 22:48:09 +02:00
Robert Olsson
3c19e870f1 Moving the avr-rss2 platform examples to the global examples 
location as suggested by the maintainers.
 2016-05-14 12:05:19 +02:00
Thomas
4870f9e8f3 Fix for IPv6 compilation and linkage errors 
Two errors have been spotted, when IPv6 is enabled in the ravenusb
Project-Makefile:
#CONTIKI_NO_NET=1
CONTIKI_WITH_IPV6=1

The compile error results from a variable name mismatch in cdc_task.c
The variable 'r' is undeclared and should be renamed to 'route'

The linker also fails with 'undefined references'
This has been mediated by adding 'core/net' to Modules in the
Project-Makefile.
 2016-05-09 18:18:28 +02:00
Antonio Lignan
bea58c15bd Merge pull request #1485 from g-oikonomou/contrib/cc2650/launchpad 
Add support for the CC2650 LaunchPad (LAUNCHXL-CC2650)
 2016-04-29 11:13:05 +02:00
Antonio Lignan
a70b9bc277 Merge pull request #1447 from alignan/pull/cc1200-sensniff 
Added sensniff support for the CC1200
 2016-04-27 23:59:45 +02:00
Pere Tuset
70d94133ea Updated OpenMote example and platform. 2016-04-25 01:50:23 +02:00
Michael LeMay
73774def6b x86, galileo: Add sample non-driver protection domain 
This patch adds a simple non-driver protection domain sample to serve
as an example for defining other non-driver protection domains.  It
simply performs a ping-pong test of protection domain switching
latency during boot, including optional accesses to a private metadata
region, and prints out the results.
 2016-04-22 08:16:43 -07:00
Nicolas Tsiftes
fb5f0f66dd Removed Deluge and associated test files. 2016-04-21 13:24:16 +02:00
Nicolas Tsiftes
be13fc7d23 Merge pull request #1605 from tonnenpinguin/pr_fix_slip_config 
Add typecast to native border router switch statement
 2016-04-20 12:51:43 +02:00
Bernhard Hackl
2ad3d85d41 Fix slip config switch statement 2016-04-20 08:14:08 +00:00
Pere Tuset
d9f4d97a41 Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API. 2016-04-19 22:41:40 +02:00
Simon Duquennoy
d828557563 Merge pull request #1425 from kkrentz/llsec-fixes 
random LLSEC fixes
 2016-04-19 17:29:00 +02:00
George Oikonomou
040bada378 Merge pull request #1590 from OpenMote/master 
Add OpenMote-CC2538 platform and examples.
 2016-04-18 21:26:15 +01:00
Pere Tuset
3e00ea55d1 Updated the OpenMote-CC2538 platform and examples. 2016-04-18 16:48:48 +02:00
kkrentz
4a88e9e537 llsec: Removed TSCH_SECURITY_CONF_LEVEL and TSCH_SECURITY_LEVEL 2016-04-13 09:16:08 -07:00
kkrentz
10d8b05bc6 llsec: Permit dynamic security levels 2016-04-13 07:54:46 -07:00
Antonio Lignan
8f064511d3 Merge pull request #1213 from joakimeriksson/dao_ack_handling 
End-to-End DAO and DAO ACK handling for Contiki RPL.
 2016-04-11 18:53:43 +02:00
Pere Tuset
1d3c37d6da Add OpenMote-CC2538 platform and examples. 2016-04-11 12:35:02 +02:00
thomas-ha
a7b43de535 add comment, use spaces 2016-04-06 16:54:45 +02:00
Oliver Schmidt
b287351d99 Activated CBM PFS for the C64 Telnet server. 
Now that the CBM PFS supports file removal (and a file seek stub) it is possible to have the Telnet server leverage the IDE64 support of the CBM PFS.

Note: Using the CBM PFS for the Telnet server does _not_ reduce the code size since the POSIX I/O functions are additionally still linked in because the POSIX directory functions internally use the POSIX I/O functions. And that's the very reason why the CBM PFS is _not_ activated for the C128 Telnet server: The CBM PFS for the C128 doesn't bring IDE64 support but is supposed to be used to reduce code size - but this isn't possible for the Telnet server.
 2016-03-28 19:43:51 +02:00
Joakim Eriksson
12ac02650b fixed a bug in nbr policy and DAO retransmission handling and added new wismote simulation 2016-03-26 09:45:39 +01:00
Joakim Eriksson
ee97dc4bcd tuned configuration for rpl-collect and micaz platform 2016-03-26 09:45:39 +01:00
Joakim Eriksson
1d92359e72 Replaced MRHof with OF-0 for getting code-size down for er-example 2016-03-26 09:45:37 +01:00
Joakim Eriksson
60dc6503e5 disabled DAO ACK and configured for only one DAG per instance to save memory for er-example 2016-03-26 09:45:37 +01:00
Joakim Eriksson
f4255fad0f updated rpl-udp example with scalability test 2016-03-26 09:45:36 +01:00
thomas-ha
199b1b5316 remove define for SFD interrupt 
not needed anymore when using MAC timer
 2016-03-23 09:10:19 +01:00
Michael LeMay
3908253038 x86: Add support for (paging-based) protection domains 
This patch implements a simple, lightweight form of protection domains
using a pluggable framework.  Currently, the following plugin is
available:

 - Flat memory model with paging.

The overall goal of a protection domain implementation within this
framework is to define a set of resources that should be accessible to
each protection domain and to prevent that protection domain from
accessing other resources.  The details of each implementation of
protection domains may differ substantially, but they should all be
guided by the principle of least privilege.  However, that idealized
principle is balanced against the practical objectives of limiting the
number of relatively time-consuming context switches and minimizing
changes to existing code.

For additional information, please refer to cpu/x86/mm/README.md.

This patch also causes the C compiler to be used as the default linker
and assembler.
 2016-03-21 17:18:06 -07:00
Michael LeMay
e0d124c7c5 galileo: Add example to print out IMR information 
This patch adds an example program to print out information about the
configuration of the Intel Quark X1000 SoC Isolated Memory Regions
(IMRs), the Host System Management Mode Controls register, and the
Host Memory I/O Boundary register.
 2016-03-17 08:35:49 -07:00
Nicolas Tsiftes
9ab327090c Merge pull request #1444 from mdlemay/galileo-always-init-gpio 
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
 2016-03-14 20:09:40 +01:00
Nicolas Tsiftes
862e43d9b0 Merge pull request #1523 from Zolertia/pull/z1-apify-sensors 
Adapt Z1 on-board sensors to Contiki's API
 2016-03-14 17:10:46 +01:00
Simon Duquennoy
88a0db6aee Add missing includes 2016-03-14 14:52:59 +01:00
Simon Duquennoy
4bf868fd99 Fix a number of leftover mentions of aaaa as a prefix (now fd00) 2016-03-14 13:56:00 +01:00
Simon Duquennoy
cd981b23d5 Merge pull request #1297 from simonduq/pr/default-prefix 
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
 2016-03-13 20:39:16 +01:00
thomas-ha
45c7477650 original node.c 2016-03-11 11:02:43 +01:00
thomas-ha
57a47bb12f node_id on cc2538dk 2016-03-10 18:36:47 +01:00
thomas-ha
a4ccce8dac enable 32 kHz crystal oscillator for TSCH 2016-03-08 15:54:03 +01:00
thomas-ha
b32ad0dbbd define for SFD timestamp on cc2538 2016-03-07 18:37:03 +01:00
Simon Duquennoy
dea04c67d7 Change the default IPv6 prefix from aaaa::/64 to fd00::/64 2016-03-07 17:47:44 +01:00
Simon Duquennoy
8b63b41b96 TSCH-security: disable TSCH logs to save ROM, relax checks in 21-z1-rpl-tsch-security.csc accordingly 2016-03-07 17:43:25 +01:00
Joakim Nohlgård
1219790312 examples/er-rest-example/resources/res-event.c: fix warning: function declaration isn't a prototype 2016-03-02 07:25:19 +01:00
Aitor Mejias
56aeb7cd7e Added Zolertia Zonik sound sensor test and drivers 2016-02-22 16:49:35 +01:00
Antonio Lignan
934cdbacca Adapted the ADXL345 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Antonio Lignan
1be30d52dc Removed unused blocks and made functions static 2016-02-22 12:08:56 +01:00
Antonio Lignan
151f532225 Adapted the TMP102 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Michael LeMay
1f445172ff galileo: Fix build help message in examples 
This patch fixes examples/galileo/Makefile so that it actually
displays the intended help message when an unrecognized EXAMPLE is
selected.
 2016-02-16 21:19:44 -08:00
Michael LeMay
b82d92e373 galileo: Add I2C callbacks example 
This patch adds an example for I2C callbacks that is very similar to
the i2c-LSM9DS0 example except that it uses a PWM device that is built
into the platform.
 2016-02-16 21:19:44 -08:00
Michael LeMay
58874ea25d x86, galileo: Refactor I2C and GPIO initialization 
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.

This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration.  Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
 2016-02-16 21:19:44 -08:00
Michael LeMay
3e64447631 galileo: Expand README for examples 
This patch expands the instructions in examples/galileo/README.md.
 2016-02-16 21:19:44 -08:00
Michael LeMay
c9bffe6d5a galileo: Convert README for examples into README.md 
This patch renames and reformats examples/galileo/README to use
Markdown.
 2016-02-16 21:19:44 -08:00
Antonio Lignan
0dbed519a5 Merge pull request #1507 from Zolertia/remote-voc-test 
Added VOC (iAQ-Core) drivers and test application
 2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45 Added VOC (iAQ-Core) drivers and test application 2016-02-15 11:00:48 +01:00
Wojciech Bober
38481c513d nrf52dk: added examples 2016-02-15 09:37:38 +01:00
Antonio Lignan
c6ded00dc4 Merge pull request #1512 from alignan/pull/fix-z1-websense 
Fix z1-websense example
 2016-02-13 16:35:50 +01:00
Antonio Lignan
b2b573e9e7 Fix z1-websense example 2016-02-12 19:10:02 +01:00
Benoît Thébaudeau
287092db42 Merge pull request #1486 from alignan/pull/cc2538-common 
Unified cc2538 examples into single cc2538-common placeholder
 2016-02-04 23:48:35 +01:00
Antonio Lignan
45c125949a Unified cc2538 examples into single cc2538-common placeholder 2016-02-04 17:26:11 +01:00
Simon Duquennoy
658cf0d2cc Reworking jn516x default configuration and examples 2016-02-03 10:35:48 +01:00
Simon Duquennoy
15a5f27080 Adding TSCH to examples/jn516x/rpl 2016-02-01 13:38:53 +01:00
George Oikonomou
61e619dfcd Extend the CC26xx web demo to support the LaunchPad 2016-01-28 11:23:20 +00:00
George Oikonomou
54f0a2ecbd Extend the CC26xx demo to support the LaunchPad 2016-01-28 11:23:20 +00:00
Toni Lozano
1f6dafecb0 Modified ADC measurement of PM10 driver to include adc-zoul direct access 2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69 Minor fixes 2016-01-26 09:45:43 +01:00
Toni Lozano
31e6cc48ca Solved doxygen comments information from VAC, AAC and PM10 sensor files 2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931 Added PM10 GP2Y1010AU0F sensor driver and demo test 2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821 Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results 2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a Added PM10 and VAC parameters to adc_sensors driver 2016-01-25 10:04:25 +01:00
Antonio Lignan
246b01095f Ported Grove LCD with RGB backlight for the Zoul platforms 2016-01-23 15:52:29 +01:00
Antonio Lignan
9a80c0098f Added zero-calibration function and added offset values to the structure 2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50 Clear interrupt and trigger callback if new data is generated 2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094 Ported Grove's 3-axis gyroscope sensor (based on ITG-3200) 2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89 Unified BMP180 and BMP085 drivers 2016-01-22 16:11:49 +01:00
Antonio Lignan
ec45369d1b Merge pull request #1466 from alignan/pull/weather-meter 
Add driver for the Sparkfun Weather meter station
 2016-01-22 15:18:14 +01:00
Fredrik Österlind
9bdb1f1794 Merge pull request #1462 from MichaelKlemm/FixCoojaPluginLoad 
Fixed loading SerialSocketServer plugin in Cooja using FQDN
 2016-01-21 09:39:40 +01:00
Antonio Lignan
a6c30b4e09 Fixed missing static keyword in both zoul-demo and weather meter driver 2016-01-19 22:24:53 +01:00
Antonio Lignan
366f11d5df Uncrustified weather meter driver and example 2016-01-19 18:03:16 +01:00
Antonio Lignan
81bec49a40 Changed fixed 2 minute integration period to allow overriding 2016-01-19 18:00:18 +01:00
Antonio Lignan
0902e0fc6d Added degree converted value for the wind vane sensor. 
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
 2016-01-19 17:47:46 +01:00
Antonio Lignan
61f1516369 Reworked instant wind speed calculation and extended the available wind speed return values 2016-01-19 17:47:46 +01:00
Antonio Lignan
aacbcd904f Added interrupt configuration for the weather meter 2016-01-19 17:47:46 +01:00
Antonio Lignan
103911f619 Added driver for the Sparkfun's weather meter station 2016-01-19 17:47:46 +01:00
Antonio Lignan
2295ecdbd9 Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use 2016-01-17 23:04:34 +01:00
Antonio Lignan
503abb4415 ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface 2016-01-17 22:40:06 +01:00
Antonio Lignan
ac07e848b7 Minor fixes to file descriptions and disable DEBUG switches 2016-01-17 21:52:34 +01:00
Simon Duquennoy
c792f5cf4b Merge pull request #1409 from nfi/oma-lwm2m-ipso 
Implementation of OMA LWM2M Engine / IPSO Objects
 2016-01-17 10:20:33 +01:00
Michael Klemm
c03b05c702 Fixed loading SerialSocketServer plugin in Cooja using FQDN 2016-01-16 12:25:42 +01:00
Antonio Lignan
99f0c9f19b Merge pull request #1457 from alignan/pull/motion-sensor 
Add support for digital motion/presence sensors
 2016-01-11 20:30:09 +01:00
Antonio Lignan
57f4134c9e Merge pull request #1454 from alignan/pull/sht25-sensor 
Fixes and enhancements for the SHT25 sensor
 2016-01-11 20:29:14 +01:00
Antonio Lignan
94657b7a72 Merge pull request #1449 from alignan/pull/bmp085-sensor 
BMP085 barometric sensor for the RE-Mote platform
 2016-01-11 20:28:35 +01:00
Antonio Lignan
c644a32dc7 Added support for digital presence/motion sensors 2016-01-11 18:36:31 +01:00
George Oikonomou
c394302c44 Merge pull request #1446 from alignan/pull/tsl2563-sensor 
Enhanced TSL2563 driver for the Zoul module (RE-Mote/Firefly)
 2016-01-11 11:21:51 +00:00
Antonio Lignan
48eb2a4fe2 Uncrustify changes 2016-01-10 23:36:00 +01:00
Antonio Lignan
d53a62187d Added extra features of the SHT25 sensor 2016-01-10 23:33:33 +01:00
George Oikonomou
fa40d2b1fc Remove documentation references to the Sensinode platform 
This is part of a set of commits that will obsolete the Sensinode platform
 2016-01-10 15:09:31 +00:00
George Oikonomou
707353f71b Remove Sensinode platform, cpu, example and tools files 
This is part of a set of commits that will obsolete the Sensinode platform
 2016-01-10 15:01:58 +00:00
Antonio Lignan
7b953091e5 Added BMP085 barometric sensor for the Zoul platform 2016-01-10 04:17:26 +01:00
Antonio Lignan
7abee394cb Initialized interrupt thresholds and added missing check 2016-01-10 04:09:07 +01:00
Benoît Thébaudeau
ada5c6193e cc2538dk: pka: Fix missing Makefile.target 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-09 15:43:20 +01:00
Benoît Thébaudeau
f78a132395 cc2538: pka: Fix include paths breakage 
The PKA drivers and examples were full of include paths missing the
appropriate prefix, or using angle brackets instead of double quotes or
the other way around.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-09 15:43:13 +01:00
Antonio Lignan
a8a1ebf8b5 Added interruption feature to the TSL2563 driver 2016-01-08 15:14:37 +01:00
Antonio Lignan
8456b8333f Added sensniff support for the CC1200 2016-01-08 14:45:50 +01:00
Antonio Lignan
881e78cb60 Rewamped TSL2563 light sensor 2016-01-07 12:53:31 +01:00
Benoît Thébaudeau
ccceb63e88 cc2538: Add crypto driver and example for AES-GCM 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-06 23:22:54 +01:00
Benoît Thébaudeau
e77e9861fe cc2538: Add crypto driver and example for AES-CBC-MAC 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
47c24cab11 cc2538: Add crypto driver and example for AES-CTR 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
cf5e9557f8 cc2538: Add crypto driver and example for AES-CBC 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-06 22:01:41 +01:00
Simon Duquennoy
14be5aae88 Merge pull request #1423 from TeVeDe/master 
Add examples for NXP JN516x using TSCH
 2016-01-05 15:54:04 +01:00
Theo van Daele
68b2b3dd1c Add examples for NXP JN516x using TSCH 2016-01-05 10:44:13 +01:00
Benoît Thébaudeau
3dbe4c9403 cc2538: Add crypto driver and example for AES-ECB 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-04 00:28:26 +01:00
Benoît Thébaudeau
04890b1899 cc2538: ccm: Allow separate input/output buffers 
This is supported by the hardware, so give access to this feature in the
API.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2016-01-04 00:28:26 +01:00
Antonio Lignan
ca919ab0b0 Merge pull request #1196 from otcshare/x86 
New platform: Intel Galileo Board
 2015-12-23 12:33:47 +01:00
Antonio Lignan
36ddb737e1 Refactored the example to broadcast a message to the zoul-demo example 2015-12-22 15:16:55 +01:00
Joakim Eriksson
5da887c35f added readme for ipso-objects 2015-12-21 14:39:16 +01:00
Ricardo de Almeida Gonzaga
ba09b47d65 galileo: Initialize pinmux in i2c-LSM9DS0 example 
In order to ensure SCL and SDA are exported in the correct pins.
 2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
77327181e0 galileo: Add GPIO interrupt example 
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate interrupt pins.

The application uses default galileo pinmux initialization and sets
the GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as interrupt. It toggles
the output pin stat at every half second in order to emulate an interrupt.
This triggers an interrupt and the application callback is called.
 2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
61e06c632a galileo: Add GPIO input example 
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate input pins.

The application uses default galileo pinmux initialization and sets the
GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as input. It toggles the
output pin state at every half second and checks the value on input pin.
 2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
7dfd753b21 galileo: Add I2C master example 
This patch adds an example application that shows how to use I2C driver
APIs to communicate with LSM9DS0 sensor. At every 5 seconds, the
application reads the "Who Am I" register from gyroscope sensor and
prints if the register value matches the expected value.
 2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
cc51f89b31 galileo: Add GPIO output example 
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate output pins. The application sets the
GPIO 4 pin as output pin and toggles its state at every half second.
 2015-12-21 08:06:14 -02:00
Jesus Sanchez-Palencia
b8056b9c97 examples: Add all-timers example 
This commit adds a very simple example which is useful to verify
that all timers APIs are working. There are 3 protothreads running,
the first process tests etimer, timer and stimer APIs, the second
process tests the ctimer APIs, and the third one tests the rtimer
APIs.
 2015-12-21 08:06:14 -02:00
Antonio Lignan
5e14c22c98 Add support for the RE-Mote on-board power management feature 2015-12-18 16:20:30 +01:00
Theo van Daele
654bb913f0 Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00
Antonio Lignan
834f965c95 Added support for the RE-Mote on-board Real Time Clock Calendar (RTCC) 2015-12-16 18:43:33 +01:00
Benoît Thébaudeau
4a6e19ed38 cc2538: pwm: Automatically disable PM1+ if running 
The peripheral core clocks of the PWM timers are gated in PM1+, so these
power modes must be disabled if a PWM timer is running. Use
lpm_register_peripheral() to handle this automatically and dynamically.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-12-13 02:39:55 +01:00
Simon Duquennoy
7eabf8d391 TSCH: latest update from https://github.com/EIT-ICT-RICH/contiki 2015-12-04 15:21:58 +01:00
Simon Duquennoy
f225ff43d3 Added TSCH+RPL example, with support for link-layer security and Orchestra scheduling 2015-12-04 15:21:54 +01:00
Simon Duquennoy
bc17cdca2c Merge pull request #1408 from simonduq/pr/jn516x-update 
JN516x: tickless clock, power saving update, 32 kHz rtimer
 2015-12-03 14:59:53 +01:00
Simon Duquennoy
bef32c20fb jn516x examples: print out network state periodically 2015-12-03 13:57:26 +01:00
Oliver Schmidt
7288a364b0 Fixed C&P error. 2015-12-03 09:09:21 +01:00
Oliver Schmidt
922bebc68a Some targets only return from getchar() on newline. 2015-12-02 18:27:54 +01:00
Oliver Schmidt
48d1d74f1c Fixed dacef46b03 2015-12-02 18:24:44 +01:00
Niclas Finne
3dd11603a7 Implementation of OMA LWM2M Engine / IPSO Objects 2015-12-02 15:40:05 +01:00
Antonio Lignan
e47b309536 Added note in PWM driver and example about PM0 2015-11-30 09:43:35 +01:00
Antonio Lignan
37fcb927be Added PWM driver for the Zolertia Zoul module and CC2538 platforms 2015-11-25 23:56:29 +01:00
Marco Grella
e47c69c170 Merge remote-tracking branch 'upstream/master' into stm32nucleo-spirit1 2015-11-25 12:36:01 +01:00
Antonio Lignan
830f5fb60d Fixed warnings in Z1 examples 2015-11-24 22:02:05 +01:00
George Oikonomou
a30154c43e Fix code style: zoul examples 2015-11-24 21:15:34 +01:00
George Oikonomou
be1bd9a619 Fix code style: Z1 websense example 2015-11-24 21:15:34 +01:00
George Oikonomou
e1f6d39857 Fix code style: Z1 main examples 2015-11-24 21:15:34 +01:00
Antonio Lignan
27fd1a5eb8 Updated RE-Mote revision A support and cleaning up Zolertia platforms 2015-11-24 21:15:33 +01:00
Simon Duquennoy
673d1d103b JN516x: minor fixes 2015-11-21 10:23:15 +01:00
Marco Grella
41f9ca08e2 Merge with updated master. 2015-11-11 13:42:35 +01:00
Simon Duquennoy
4c52b87ac1 Ported jn516x slip-bridge to new uip_fallback_interface 2015-11-10 09:30:36 +01:00
Simon Duquennoy
dacef46b03 wget.c: replace deprecated gets with safe fgets 2015-11-10 09:09:31 +01:00
Simon Duquennoy
fbd78a7e3b Merge pull request #1293 from simonduq/pr/fix-warnings 
Fix a number of compiler warnings and enable -Werror in Travis
 2015-11-10 08:49:11 +01:00
Oliver Schmidt
8e9da827c0 Several minor adjustments. 2015-11-03 22:09:24 +01:00
Oliver Schmidt
fb5d0b7ef0 Made 80 column display a cc65 application attribute. 
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.

I see three types of application:

* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig

* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget

* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser

Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
 2015-10-30 12:42:58 +01:00
Marco Grella
e261cda8dc Compilation flags update: BOARD=ids01a4/5 SENSORBOARD=iks01a1 2015-10-27 12:12:59 +01:00
Rémy Léone
f2440235b5 Fix CSC & XML export to match .gitattributes 2015-10-22 16:05:40 +02:00
Benoît Thébaudeau
bf41de1be5 Merge pull request #1078 from drandreas/cc2538-crypto 
cc2538: Add PKA drivers, ECC algorithms and examples
 2015-10-21 11:24:35 +02:00
Simon Duquennoy
2daa3d7377 Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface 
More flexibility for the fallback interface
 2015-10-20 11:33:14 +02:00
Simon Duquennoy
8f954fbab5 res-b1-sep-b2.c: fix type of iterator 2015-10-20 10:11:50 +02:00
Simon Duquennoy
1634acf2c4 jn516x examples: fix compiler warnings to enable -Wall -Werror compilation 2015-10-20 10:11:46 +02:00
Adam Dunkels
9b6377ecdc Fix compiler warnings 2015-10-20 10:11:37 +02:00
Adam Dunkels
afe3612c0c Fix compiler warnings 2015-10-20 10:11:36 +02:00
Simon Duquennoy
e3303c7e99 Added missing undef in examples/cc2528dk/sinffer/project-conf.h 2015-10-20 09:37:10 +02:00
Simon Duquennoy
c8ec08732c Fix broken printf in examples/er-rest-example/resource/res-b1-sep-b2.c 2015-10-20 09:37:09 +02:00
Simon Duquennoy
9c15d1c42f Merge pull request #1063 from simonduq/configure-na 
Default NDP configuration
 2015-10-18 20:26:55 +02:00
Simon Duquennoy
10bd49a71a Merge pull request #756 from sieben/dos2unix 
dos2unix fix
 2015-10-18 20:26:07 +02:00
AntiCat
d631270af4 cc2538: Add PKA drivers, ECC algorithms and examples 2015-10-18 20:14:17 +02:00
Konrad Krentz
0a6b1cb646 llsec: Added AEAD mode to CCM* 2015-10-14 08:22:44 -07:00
Konrad Krentz
c656a4d1c5 llsec: Fixed style issues in CCM* 2015-10-14 08:22:44 -07:00
Konrad Krentz
2059b6559e llsec: Let llsec_drivers define their own framer 2015-10-14 08:21:40 -07:00
Marco Grella
4e81c87c3a Fix to sensor-demo license and Readme file. 2015-10-13 12:21:21 +02:00
Marco Grella
fc65757114 License headers and code style fixes. 2015-10-09 19:40:39 +02:00
Simon Duquennoy
2231cc9b0f Merge pull request #1266 from drugo72/avr-revival 
AVR revival: new battery and temperature sensors and er-rest-example for the Raven
 2015-09-28 17:52:26 +02:00
Simon Duquennoy
2834b41ed6 Merge pull request #1267 from drugo72/rest 
REST:  new observable, periodic temperature resource
 2015-09-28 17:52:05 +02:00
Mariano Alvira
94daacd244 Merge pull request #817 from SmallLars/econotag-ecc 
Addet ECC functions on elliptic curve secp256r1.
 2015-09-28 09:45:11 -05:00
Simon Duquennoy
f9537b6355 Merge pull request #1219 from simonduq/jn516x-port 
NXP JN516x Platform
 2015-09-25 12:09:52 +02:00
Lars Schmertmann
17ff3bb466 Added ECC functions on elliptic curve secp256r1 2015-09-24 14:11:20 +02:00
Simon Duquennoy
0780e1a051 Added NXP JN516x examples 2015-09-23 14:38:41 +02:00
Víctor Ariño
76e293c289 Fixes ret value for output fallback iface in tun-bridge.c 2015-09-22 12:53:04 +02:00
Víctor Ariño
561e70b18e Updated current fallback_interface(s) to return int. 2015-09-22 12:53:04 +02:00
Cristiano De Alti
6e91cb3a39 Activate battery and temperature resources 
if they are supported by the platform.
 2015-09-21 23:20:45 +02:00
Cristiano De Alti
ba3c167cef Add a new periodic temperature resource. 
The temperature sensor is sampled once per second.
If observed, temperature readings are reported on change or every
Max-Age interval (default: 60s).
 2015-09-21 23:12:16 +02:00
Cristiano De Alti
5a829d818d er-rest-example leveraging the new rave sensors. 2015-09-21 22:53:48 +02:00
Lars Schmertmann
46ffc509c1 Added App/Tool/Example for usage of additional flash on econotag/mc1322x 2015-09-14 20:43:12 +02:00
Marco Grella
87970a88a4 Comments and documentation fixes. 2015-09-10 14:28:08 +02:00
Marco Grella
b7459a12c1 Added radio sensor. 2015-09-07 19:59:03 +02:00
Rémy Léone
7a5071dd30 Adding a gitattributes and correcting line-endings 
https://help.github.com/articles/dealing-with-line-endings/
 2015-09-07 15:40:02 +02:00
Marco Grella
17aafb9daa Align to current master 2015-09-04 17:01:04 +02:00
Nicolas Tsiftes
607303ecdd Merge pull request #1081 from pablocorbalan/light 
Remove old unused light drivers
 2015-08-28 14:13:00 +02:00
Adam Dunkels
bfb29d2f11 Merge pull request #1116 from cetic/pr-uip-clear-buffer 
Add uip_clear_buf() macro and replace all instances of uip_len = 0
 2015-08-27 10:27:08 +02:00
Jonas Olsson
67045d4012 Export RSSI to default parent in the CC26xx web demo 
The current version of the CC26xx web demo publishes over MQTT the default parent's IPv6 address and the last observed RSSI of this link. This is collected by active probing (periodic ping).

This commit brings the probing functionality to the example's main code module. The MQTT client keeps publishing as previously, but we now also export the same information through CoAP resources. Configuration is still possible through the example's web server.
 2015-08-23 20:41:12 +01:00
Jonas Olsson
bad7eb2bc8 Add a very sleepy CC26xx/CC13xx demo 
This demonstraties how to combine CC13xx tick suppression, RPL leaf mode and turning off ContikiMAC duty cycling to build an extremely low-consuming firmware.
 2015-08-23 20:41:12 +01:00
Jonas Olsson
72b586cb7d Modify cc26xx examples to play nicely with the CC13xx addition 2015-08-23 20:41:11 +01:00
Oliver Schmidt
902b21a326 Merge pull request #1188 from oliverschmidt/master 
Some finishing touch on the CBM retro targets.
 2015-08-08 16:33:59 +02:00
Oliver Schmidt
757809196e Some finishing touch on the CBM retro targets. 2015-08-08 15:41:24 +02:00
Pablo Corbalán
5db5524b7f Remove unneeded headers in sky-shell-exec 2015-08-04 20:39:09 +01:00
Joe Andrieu
e0f72b9545 Clarified that a newline is needed for the echo 2015-07-26 16:17:34 -07:00
Marco Grella
86f35536a4 Added new stm32nucleo-spirit1 platform 2015-07-24 16:30:10 +02:00
Oliver Schmidt
a0be26d9f1 Merge pull request #1150 from oliverschmidt/master 
Several retrocomputing config changes.
 2015-07-06 09:42:55 +02:00
Simon Duquennoy
3315d3069d Merge pull request #1108 from phoenix-frozen/generify-ccm-star 
generalised CCM module into lib
 2015-07-01 10:44:41 +02:00
Oliver Schmidt
00f9eebfab Changed Telnet server configuration for the Apple II. 
Having the Telnet server reboot on exit (via ctrl-reset) allows to bring back the full MTU.
 2015-06-28 22:25:28 +02:00
Oliver Schmidt
a70fbf1bbf Reconfigured Telnet server. 
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
 2015-06-21 21:07:41 +02:00
Oliver Schmidt
fc9d38caba Reduced default for number of connections. 
Save some memory by reducing the the default for number of connections from 10 to 2.
 2015-06-21 20:58:51 +02:00
Laurent Deru
1f0fd3f38b Add uip_ext_len definition in fakeuip.c for ravenusbstick 2015-06-15 15:15:59 +02:00
Laurent Deru
1784338b2e Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it 2015-06-15 11:10:51 +02:00
Justin King-Lacroix
3ce8f26eea generalised CCM module into lib 
introduced convenience functions for LLSEC modules
 2015-06-10 18:07:41 +01:00
Benoît Thébaudeau
e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-06-02 21:41:56 +02:00
Benoît Thébaudeau
801315e819 cc2538: aes: Make it possible to have several keys stored at once 
Several keys can be kept at the same time in the key store, and several
keys can be loaded at once. Give access to these features.

The ccm-test example is also improved to better demonstrate the use of
the key store.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
b92a5afcc4 cc2538: ccm: Make it possible to use the interrupt 
Using the AES interrupt allows the user process not to waste time
polling for the completion of the operation. This time can be used by
the user process to do something else, or to let the system enter PM0.

Since the system is now free to perform various operations during a
crypto operation, a protection of the crypto resource is added, and PM1+
is prohibited in order not to stall crypto operations.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
117dc4e5e3 cc2538: Add crypto drivers and examples for AES-CCM and SHA-256 
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
 2015-06-02 21:41:06 +02:00
Antonio Lignan
330e450ba4 Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094). 
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
 2015-05-29 22:04:43 +02:00
Antonio Lignan
2cee62eb33 Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware 
Update to latest CC26xxware and add it as a submodule
 2015-05-21 10:01:00 +02:00
Adam Dunkels
730bda2001 Merge pull request #883 from cmorty/pull/global-macros 
Move MAX, MIN and ABS to contiki-macros
 2015-05-18 21:33:00 +02:00
Moritz 'Morty' Strübe
0dab6926b3 Move MAX, MIN and ABS to sys/cc.h 2015-05-18 08:53:17 +02:00
George Oikonomou
5f4154a0e3 Adjust AON BatMon usage 2015-05-17 14:09:51 +01:00
Antonio Lignan
32afadea77 Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm 
CC26xx Ultra Low Power Operation
 2015-05-16 10:27:22 +02:00
Antonio Lignan
402eabecca Merge pull request #929 from lab11/delete-old-coap 
Delete old CoAP implementation
 2015-05-15 15:49:04 +02:00
George Oikonomou
7e00eeb76a Achieve lowest consumption with the CC26xx demo: 
This changes the CC26xx simple demo so that a devices running this firmware will achieve the lowest possible energy consumption without requiring any changes to the example
 2015-05-15 09:21:05 +01:00
George Oikonomou
421fbfae25 Change the LPM locks API: 
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.

This allows us to maintain only one linked list of LPM modules and overall improves code clarity
 2015-05-15 09:21:02 +01:00
George Oikonomou
00a6c31158 Improve OPT sensor driver and usage 
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
 2015-05-15 09:20:59 +01:00
Antonio Lignan
b50ae639b3 Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor 
Replace STH21 with HDC1000 for the CC2650 SensorTag
 2015-05-15 10:12:08 +02:00
Brad Campbell
869768902b seedeye powerswitch: update coap 
The powerswitch app was using old an older implementation of er-coap.
This updates it.
 2015-05-14 17:20:46 -04:00
Brad Campbell
6eaada0c3f Delete old CoAP implementation 
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
 2015-05-14 17:20:46 -04:00
Benoît Thébaudeau
d64927397f Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors 
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
 2015-05-14 19:21:56 +02:00
George Oikonomou
e4722bb0ea Replace SHT21 with HDC1000 in the web demo 2015-05-14 13:20:39 +01:00
George Oikonomou
62f978b993 Replace SHT21 with HDC1000 in the simple demo 2015-05-14 13:20:39 +01:00
George Oikonomou
11a5e0a49a Merge pull request #1051 from simonduq/fix-warning 
Fixed a number of compiler warnings
 2015-05-13 00:52:40 +01:00
George Oikonomou
49d1782a06 Adjust the MQTT demo to use re-engineered sensors 2015-05-12 23:42:20 +01:00
George Oikonomou
ac459df128 Re-work the CC2538 demo to use the 3 separate ADC sensors 2015-05-12 23:42:20 +01:00
Simon Duquennoy
1ac5d85042 Enable NA in examples that need it 2015-05-10 19:56:38 +02:00
Nicolas Tsiftes
44af0fa66b Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket 
New HTTP socket, DNS64, IP64 Cooja tests
 2015-05-10 17:14:31 +02:00
Adam Dunkels
bc222ed85c Code for building an IP64 router 2015-05-10 10:51:11 +02:00
Adam Dunkels
33372945a3 HTTP socket code with support for GET and POST 2015-05-10 10:51:11 +02:00
George Oikonomou
447be526ae Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br 
Enable slip-radio and rpl-border-router for CC26xx
 2015-05-09 22:51:06 +01:00
George Oikonomou
6e3197b0bf Merge pull request #1008 from g-oikonomou/cc26xx/contrib/web-demo-httpd 
Improve HTTPD in the CC26xx web demo
 2015-05-09 22:46:26 +01:00
George Oikonomou
bd5e35c968 Merge pull request #1052 from simonduq/packetbuf-cleanup 
Packetbuf cleanup
 2015-05-09 22:30:21 +01:00
George Oikonomou
33526be5ab Merge pull request #985 from g-oikonomou/cc26xx-minor-updates 
Minor Updates to the CC26xx Port
 2015-05-09 22:29:30 +01:00
George Oikonomou
38b3b8b74a Merge pull request #981 from g-oikonomou/cc2538-sniffer-fix 
Turn on the CC2538 RF explicitly in the sniffer example
 2015-05-09 21:56:23 +01:00
Simon Duquennoy
4a93f5148d Fixed a number of compiler warnings 2015-05-08 09:07:20 +02:00
Simon Duquennoy
290fc829ea Consistently use PACKETBUF_ATTR_MAC_SEQNO for MAC sequence number, both input and output. Disable PACKETBUF_ATTR_PACKET_ID in the non-Rime case. 2015-05-06 16:34:44 +02:00
Simon Duquennoy
bb76bb8beb Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled. 2015-05-06 16:34:26 +02:00
George Oikonomou
f83c4e7286 Improve code style 2015-05-03 22:36:03 +01:00
Nicolas Tsiftes
f7ca4b41a9 Merge pull request #1001 from adamdunkels/pr/queuebuf-no-ref 
Cleanup: remove the obsolete reference packetbuf
 2015-05-03 16:35:17 +02:00
George Oikonomou
a72d90e283 Control TCP MSS in the project's conf 2015-05-03 13:31:03 +01:00
Adam Dunkels
7acf747c1a Removed packetbuf references. This was a feature that is not used anymore and only made the code more complex. 2015-04-01 21:33:02 +02:00
Antonio Lignan
b9334a3b0e Added Reed Sensor driver and example 2015-03-30 10:30:09 +02:00
George Oikonomou
7730215f99 Point all form action attributes to the current html page 2015-03-27 20:18:58 +00:00
George Oikonomou
7637164ae7 Parse filename for POST requests 
so we can return it in the "Location:" header subsequently
 2015-03-27 20:18:58 +00:00
George Oikonomou
54c1cd05e8 Simplify the page name to script mapping 2015-03-27 20:18:58 +00:00
George Oikonomou
90a3cd8e14 Change the way we handle HTTP response headers 2015-03-27 20:18:58 +00:00
George Oikonomou
733378679f Prettify httpd top matter in the web demo 2015-03-27 20:11:44 +00:00
Antonio Lignan
1af29a5beb Added SHT25 sensor 2015-03-10 15:33:58 +01:00
George Oikonomou
1fc06b6581 Turn on the CC2538 RF explicitly 2015-02-28 15:01:32 +00:00
Nicolas Tsiftes
bfd2a90e08 Merge pull request #933 from alessandrelli/coap-observe-client 
Erbium: client-side support for CoAP Observe
 2015-02-26 10:06:58 +01:00
Jonas Olsson
0f567e499f Add CC26xx examples 2015-02-25 13:15:35 +01:00
Daniele Alessandrelli
b6e716233a er-coap-example: add example for client-side CoAP observe 2015-02-24 22:48:12 +01:00
Jonas Olsson
2bb7fcc0cb Fixed doxygen formatting 2015-02-17 16:11:45 +01:00
Jonas Olsson
4fb2bd410f Add title to doxygen group 2015-02-17 16:07:37 +01:00
Jonas Olsson
6112ec54d3 Add MQTT demo for the cc2538dk platform 2015-02-17 15:58:50 +01:00
George Oikonomou
72914369e8 Re-structure CC2538 doxygen module hierarchy 2015-02-16 10:17:58 +01:00
Michael Richardson
5699127c9a additional edits to further clarify interface between native-border-router and slip-radio 2015-02-07 10:51:41 -05:00
Michael Richardson
a0ac6bceb6 added some documentation of native-border-router and slip-radio relationship 2015-02-03 11:05:13 -05:00
Simon Duquennoy
c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy
74f6ae3751 slip-radio: remove unneeded definition of NETSTACK_CONF_WITH_RPL (now set from makefile with CONTIKI_WITH_RPL) 2014-12-01 21:04:25 +01:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Nicolas Tsiftes
bb645b6287 Merge pull request #877 from gebart/for-upstream/rpl-border-router-webserver-tcp 
examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS
 2014-11-28 19:00:46 +01:00
Nicolas Tsiftes
4a41f147d3 Merge pull request #879 from alignan/fix_rssi_app 
Fixed rssi scanner application and moved into single example
 2014-11-28 19:00:23 +01:00
Antonio Lignan
4f744d858a Fixed rssi scanner application and moved into single example 2014-11-28 13:07:26 +01:00
Joakim Gebart
1e03cdd553 examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS 
The example used to rely on the default value being set to 1 which
caused build failures on platforms which have a default UIP_CONF_TCP=0

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
 2014-11-26 19:05:32 +01:00
Joakim Gebart
64a4755354 examples/webserver-ipv6: Add UIP_CONF_TCP=1 to DEFINES. 
TCP is mandatory for this HTTP server.

Fixes builds for platforms which have TCP turned off by default (mulle)

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
 2014-11-26 19:03:51 +01:00
Nicolas Tsiftes
6ca95ebc0c Merge pull request #811 from kkrentz/llsec-renaming 
llsec renaming
 2014-11-07 22:20:15 +01:00
Antonio Lignan
ef6c351d0c Add function to change I2C baudrate and push relevant configuration values to platform config 2014-10-20 14:23:36 +02:00
Nicolas Tsiftes
27cde1ff81 Merge pull request #824 from alignan/fix_warnings 
Warning fixes
 2014-10-20 11:16:36 +02:00
Antonio Lignan
c836fbfbd9 Fixes warnings, bad code and code style 2014-10-20 10:28:00 +02:00
kkrentz
0579e304e4 llsec: Renamed ccm to ccm_star & Renamed llsec regression test 2014-10-16 09:21:56 -07:00
Adam Dunkels
d891d11324 Merge pull request #557 from kkrentz/llsec-integration 
Integration of Link Layer Security
 2014-10-08 15:45:46 +02:00
Joakim Gebart
d4179a0a0c examples/rpl-border-router: Fix two minor warnings. 
- Remove unused variable i in generate_routes.
 - Add cast to unsigned long for printf(..%lu..) in generate_routes.

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
 2014-10-04 18:05:38 +02:00
Nicolas Tsiftes
7738cdd15e Avoid compilation warnings in Antelope. 2014-09-05 18:21:47 +02:00
Pablo Corbalan
fab4f4144f Add SHT11 CoAP Resource and Activate Sensors for several CoAP Resources. 2014-08-25 11:36:31 +01:00
kkrentz
2cf7d98cad ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface 
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
 2014-08-05 05:07:06 -07:00
kkrentz
2687c345cf llsec: CCM* encryption tests 2014-08-05 05:07:05 -07:00
kkrentz
5e6cf8da36 llsec: CCM* verification tests 2014-08-05 05:07:05 -07:00
kkrentz
c396a85364 llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security 2014-08-04 01:09:57 -07:00
Fredrik Österlind
ed7e09ed5b Merge pull request #755 from sieben/SkyByteRadio 
SkyByteRadio was replaced by Msp802154Radio
 2014-07-24 09:15:45 +02:00
Rémy Léone
911f3aa07c SkyByteRadio was replaced by Msp802154Radio 2014-07-23 15:42:59 +02:00
Benjamin Cabé
afcd5e5387 Add missing semi-colon 2014-07-16 21:37:47 +02:00
Antonio Lignan
5467674fcc Merges Z1SP into Z1 platform 2014-07-04 10:41:05 +02:00
Nicolas Tsiftes
24e260910c Merge pull request #718 from g-oikonomou/rpl-dodagid-compliance 
Make DODAG ID selection RFC 6550-compliant
 2014-06-13 15:33:56 +02:00
Adam Dunkels
14aedabffd Updated to match the new leds_toggle() API 2014-06-12 20:02:33 +02:00
George Oikonomou
a9e7bea675 Make DODAG ID selection RFC 6550-compliant 
Some calls to `rpl_set_root` select a hardcoded DODAG ID
(0x1111, 0x1100, 0, 0, 0, 0, 0, 0x0011)

This is against what RFC 6550 says. We change these calls
to select a DODAG ID corresponding to a routable v6 address
corresponding to the root
 2014-06-12 00:09:53 +01:00
Adam Dunkels
eceaf0c59b Merge pull request #631 from nfi/framer-len 
Added function to framer that returns the estimated header length
 2014-06-11 23:17:47 +02:00
Adam Dunkels
64f65b4e45 Merge pull request #617 from nfi/extended-radio-api 
Extended radio API with support for setting channel, pan id, addressing modes, etc
 2014-06-03 21:32:53 +02:00
Matthias Kovatsch
2683e13da5 Updated README and Makefile. 2014-05-15 20:29:05 +02:00
Matthias Kovatsch
a26533f501 Updated Cooja simulations. 2014-05-15 20:29:05 +02:00
Lars Schmertmann
386d708b56 Added function for easy block1 usage. 
Fixed blocksize calculation when REST_MAX_CHUNK_SIZE != 2^x.
Added example for block1 + separate + block2.
 2014-05-15 20:29:04 +02:00
Lars Schmertmann
bb737f85ae Used Uncrustify and fixed Travis build errors. 2014-05-15 20:29:04 +02:00
Matthias Kovatsch
3dd5bd7a37 Renamed erbium to er-coap to avoid confusion and have a meaningful directory name. 2014-05-15 20:29:03 +02:00
Matthias Kovatsch
7d79b69ada Updated to CoAP Proposed Standard and removed draft versions. 2014-05-15 20:29:03 +02:00
George Oikonomou
49b6ad2af5 Use the extended RF API for the cc2530 border router example 2014-04-23 12:16:50 +01:00
George Oikonomou
df81cbaed9 Simplify the extended RF API example 2014-04-22 19:42:47 +01:00
Benoît Thébaudeau
d93d129da6 cc2538: uart: Make it possible to use several UARTs simultaneously 
This avoids the limitation of having a single UART available at runtime, without
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2014-04-17 18:53:44 +02:00
Niclas Finne
ceb868d934 Modified project setup for er-rest-example and rest-example to use 
nullrdc and nullmac to reduce the code size. This allows the examples
to compile on Tmote Sky again.
 2014-04-15 22:59:20 +02:00