2912559061
galileo: Revise pinmux API to be more intuitive
...
This patch replaces the pinmux APIs that require users to look up an arbitrary
function number for the desired function of each pin. The replacement API
functions have intuitive names and permit users to pass board-level IO port
numbers. The API functions internally convert those to CPU-level port numbers
when necessary. Furthermore, when configuring a pin to be a digital input or
output, those API functions also perform the corresponding configuration
operation on the CPU-level GPIO port. The revised APIs halt when users attempt
to configure a currently-unsupported GPIO, specifically those in the GPIO_SUS
port range and those implemented on the expander chip EXP2. This also means
that such ports are left unconfigured during initialization, whereas the
pinmuxing for them was setup by the old implementation.
2016-08-23 13:02:32 -07:00
cb42bafbfb
Merge pull request #1756 from g-oikonomou/contrib/cc26xx/new-ccxxwares
...
Update to latest TI CC13xxware/CC26xxware
2016-08-16 15:44:41 +02:00
3e7177dcc8
Add sensniff example README
2016-08-12 15:58:02 +01:00
ac2dcb8b03
Add sensniff example Makefile
2016-08-12 15:58:02 +01:00
4922925c07
Add sensniff support: ev-aducrf101mkxz
2016-08-12 15:58:02 +01:00
166f90e4df
Add sensniff support: zoul
2016-08-12 15:58:02 +01:00
8bca703282
Remove RPL_CONF_WITH_NON_STORING definition
2016-08-12 14:05:14 +02:00
d8fcaf9dec
Add sensniff support: z1
2016-08-12 01:23:51 +01:00
3cebc42a2a
Add sensniff support: cc13xx/cc26xx
2016-08-12 01:23:51 +01:00
525bafcc3c
Add sensniff support: openmote-cc2538
2016-08-12 01:23:51 +01:00
63941d849a
Add sensniff support: jn516x
2016-08-12 01:23:51 +01:00
690c299bb0
Add sensniff support: cc2538dk
2016-08-12 01:23:51 +01:00
1e6730758d
Add sensniff support: cc2530dk
2016-08-12 01:23:51 +01:00
c5a3a4e05e
Add off-the-shelf sensniff drivers
...
Can be re-used by any platform that uses any of those CPUs
2016-08-12 01:23:51 +01:00
a8dcb6566e
Add sensniff example core files
2016-08-12 01:23:51 +01:00
63417cba0e
Remove legacy zoul/CC1200 sniffer example
2016-08-12 01:23:50 +01:00
32e4f0f432
Remove legacy CC2538 sniffer example
2016-08-12 01:23:50 +01:00
fa769b98e9
Remove legacy CC2530 sniffer example
2016-08-12 01:23:49 +01:00
21387b954f
Merge pull request #1493 from simonduq/pr/add-missing-ext-hdr
...
Insert RPL ext header before sending ICMP, UDP and TCP messages
2016-07-25 14:56:25 +02:00
ff5a4751c8
Merge pull request #1610 from simonduq/pr/tsch-rime
...
TSCH with Rime
2016-07-25 14:55:37 +02:00
6dfd358821
TSCH port for CC2538 based platforms.
2016-07-22 09:38:25 +05:30
94413f99fe
Shrink ND cache and routing table for the CC26xx web demo
2016-07-17 01:31:21 +01:00
9839b91be5
Enable the ROM bootloader in our examples
2016-07-17 00:26:52 +01:00
afa8125913
Merge pull request #1777 from herjulf/master
...
Fix README.md not reference GPL
2016-07-15 20:30:06 +02:00
fbf3daa564
Fix README.md not reference GPL
2016-07-15 17:44:20 +02:00
d5e2a779d4
Added DHT22 sensor to Zoul-based platforms
2016-07-04 18:00:09 +02:00
7a1576815e
rpl-tsch example: use RPL non-storing mode
2016-06-30 18:15:23 +02:00
3e987ec138
Border router: include RPL links in HTTP reply when non-storing mode is enabled
2016-06-29 17:07:00 +02:00
ca3a4726d1
Rename two macros related to multicast, which are not user configuration
...
- UIP_CONF_IPV6_MULTICAST -> UIP_IPV6_MULTICAST
- RPL_CONF_MULTICAST -> RPL_WITH_MULTICAST
2016-06-20 16:35:09 +02:00
4b67e21d2e
Merge pull request #1714 from alignan/pull/add-relay
...
Added generic relay driver for the zoul-based platforms
2016-06-13 19:45:46 +01:00
373fda46f7
TSCH port for Zolertia ReMote/Zoul.
2016-06-12 16:37:01 +05:30
809883e632
Making example tsch-rime more flexible
2016-06-10 20:59:40 +02:00
78f04fda83
Added example of TSCH used with Rime
2016-06-10 20:58:57 +02:00
092f0e62fe
Added generic relay driver for the zoul-based platforms
2016-06-09 15:53:25 +02:00
b32b3f6666
RPL non-storing: add compile-test to also check for warnings
2016-06-08 14:03:22 +02:00
1a7133bbf2
Simplified configuration of RPL non-storing mode
2016-06-08 14:03:21 +02:00
2fe2a28439
Make some of the rpl examples configurable in non-storing mode
2016-06-08 14:03:10 +02:00
ee0b02c819
Merge pull request #1684 from g-oikonomou/contrib/cc26xx/aux-ctrl-and-adc
...
Add CC13xx/CC26xx AUX controller module, ADC support, ALS driver and example
2016-06-07 14:36:28 +02:00
b3faefe602
Merge pull request #1433 from mdlemay/x86-mm
...
X86 memory management
2016-06-05 13:49:49 +02:00
6c946319d9
Merge pull request #1667 from alignan/pull/at-driver
...
AT driver (master) and example
2016-06-04 22:47:24 +02:00
64679642f2
Saving ROM and RAM
2016-06-03 16:44:06 +02:00
5097842cba
Merge pull request #1688 from tsparber/fix-rssi-scanner
...
Fixed rssi-scanner example
2016-06-03 10:12:02 +02:00
3c9593f3ab
Merge pull request #1692 from pablocorbalan/unicast-sent-cb
...
RIME: Extend unicast example to include a sent callback.
2016-06-03 10:10:36 +02:00
26bf33c762
Merge pull request #1550 from thomas-ha/tsch-cc2538-port
...
Port of TSCH for CC2538
2016-06-02 21:33:55 +02:00
acf13a4e0d
Merge pull request #1606 from OpenMote/master
...
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
2016-06-01 23:15:27 +02:00
9e1c378919
Merge pull request #1469 from wbober/nrf52dk-pr
...
Add support for nRF52 DK platform
2016-06-01 23:11:39 +02:00
101575fbe2
RIME: Extend unicast example to include a sent callback.
...
This PR simply adds a packet sent callback to the unicast connection used in the example. Every time a packet is sent the callback is called and prints the linkaddr_t dest, the MAC status of the message sent, and the link layer number of transmissions of the packet. This can be used to compute link quality estimations.
2016-06-01 00:35:49 +01:00
5b3432547e
cfs-coffee: examples: Add support for CC2538
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-01 00:19:52 +02:00
6df2b91a31
test-coffee: Fix the garbage collection test
...
This test could sometimes fail because of a lack of free contiguous
pages in the file system. Fix this by removing the created files at the
end of each test. Besides, the test files do not have to be removed at
the beginning of each test since the file system is initially formatted.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
003b4b0d63
test-coffee: Fix the file modification test
...
The r variable was used instead of i to fill the buffer, resulting in
the end of the test loop after only a single iteration. The file was not
even closed at the end of each iteration although it is opened at the
beginning of each iteration, so the available file descriptors would
very quickly be exhausted.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
150b9fbd8b
test-coffee: Fix test filenames
...
The filenames were mixed up between some of the tests, thus breaking the
purpose of these tests.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
76429e4f0e
test-coffee: Fix numbering of test failure cases
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
5d227b92a3
test-cfs: Fix possible test failure after reboot
...
Remove the file at the beginning of the test, before opening it for
writing, in order to start the test with an empty file system, not only
after flashing the test, but also following every reboot.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:12 +02:00
e23c175699
cfs-coffee: examples: Fix coding style
2016-05-30 23:05:12 +02:00
4ed5c50a4e
Make CFS and Coffee examples platform-independent
...
Move the CFS and Coffee examples from sky to a common cfs-coffee folder
in order to have unified examples for multiple platforms.
2016-05-30 23:05:12 +02:00
334e38339e
Fixed rssi-scanner example
2016-05-30 10:53:20 +02:00
5a39df1439
Demonstrate ALS support in the CC26xx demo
2016-05-29 15:05:13 +01:00
c5bea81bb6
Merge pull request #1530 from herjulf/avr-rss2
...
Adding AtMegaXXRFR2 support and avr-rss2 platform
2016-05-15 20:38:50 +01:00
2b30370b42
AT driver (master) and example
2016-05-15 12:19:04 +02:00
d331d39e93
Correct paths when moving examples for regession tests
2016-05-14 22:48:09 +02:00
3c19e870f1
Moving the avr-rss2 platform examples to the global examples
...
location as suggested by the maintainers.
2016-05-14 12:05:19 +02:00
4870f9e8f3
Fix for IPv6 compilation and linkage errors
...
Two errors have been spotted, when IPv6 is enabled in the ravenusb
Project-Makefile:
#CONTIKI_NO_NET=1
CONTIKI_WITH_IPV6=1
The compile error results from a variable name mismatch in cdc_task.c
The variable 'r' is undeclared and should be renamed to 'route'
The linker also fails with 'undefined references'
This has been mediated by adding 'core/net' to Modules in the
Project-Makefile.
2016-05-09 18:18:28 +02:00
bea58c15bd
Merge pull request #1485 from g-oikonomou/contrib/cc2650/launchpad
...
Add support for the CC2650 LaunchPad (LAUNCHXL-CC2650)
2016-04-29 11:13:05 +02:00
a70b9bc277
Merge pull request #1447 from alignan/pull/cc1200-sensniff
...
Added sensniff support for the CC1200
2016-04-27 23:59:45 +02:00
70d94133ea
Updated OpenMote example and platform.
2016-04-25 01:50:23 +02:00
73774def6b
x86, galileo: Add sample non-driver protection domain
...
This patch adds a simple non-driver protection domain sample to serve
as an example for defining other non-driver protection domains. It
simply performs a ping-pong test of protection domain switching
latency during boot, including optional accesses to a private metadata
region, and prints out the results.
2016-04-22 08:16:43 -07:00
fb5f0f66dd
Removed Deluge and associated test files.
2016-04-21 13:24:16 +02:00
be13fc7d23
Merge pull request #1605 from tonnenpinguin/pr_fix_slip_config
...
Add typecast to native border router switch statement
2016-04-20 12:51:43 +02:00
2ad3d85d41
Fix slip config switch statement
2016-04-20 08:14:08 +00:00
d9f4d97a41
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
2016-04-19 22:41:40 +02:00
d828557563
Merge pull request #1425 from kkrentz/llsec-fixes
...
random LLSEC fixes
2016-04-19 17:29:00 +02:00
040bada378
Merge pull request #1590 from OpenMote/master
...
Add OpenMote-CC2538 platform and examples.
2016-04-18 21:26:15 +01:00
3e00ea55d1
Updated the OpenMote-CC2538 platform and examples.
2016-04-18 16:48:48 +02:00
4a88e9e537
llsec: Removed TSCH_SECURITY_CONF_LEVEL and TSCH_SECURITY_LEVEL
2016-04-13 09:16:08 -07:00
10d8b05bc6
llsec: Permit dynamic security levels
2016-04-13 07:54:46 -07:00
8f064511d3
Merge pull request #1213 from joakimeriksson/dao_ack_handling
...
End-to-End DAO and DAO ACK handling for Contiki RPL.
2016-04-11 18:53:43 +02:00
1d3c37d6da
Add OpenMote-CC2538 platform and examples.
2016-04-11 12:35:02 +02:00
a7b43de535
add comment, use spaces
2016-04-06 16:54:45 +02:00
b287351d99
Activated CBM PFS for the C64 Telnet server.
...
Now that the CBM PFS supports file removal (and a file seek stub) it is possible to have the Telnet server leverage the IDE64 support of the CBM PFS.
Note: Using the CBM PFS for the Telnet server does _not_ reduce the code size since the POSIX I/O functions are additionally still linked in because the POSIX directory functions internally use the POSIX I/O functions. And that's the very reason why the CBM PFS is _not_ activated for the C128 Telnet server: The CBM PFS for the C128 doesn't bring IDE64 support but is supposed to be used to reduce code size - but this isn't possible for the Telnet server.
2016-03-28 19:43:51 +02:00
12ac02650b
fixed a bug in nbr policy and DAO retransmission handling and added new wismote simulation
2016-03-26 09:45:39 +01:00
ee97dc4bcd
tuned configuration for rpl-collect and micaz platform
2016-03-26 09:45:39 +01:00
1d92359e72
Replaced MRHof with OF-0 for getting code-size down for er-example
2016-03-26 09:45:37 +01:00
60dc6503e5
disabled DAO ACK and configured for only one DAG per instance to save memory for er-example
2016-03-26 09:45:37 +01:00
f4255fad0f
updated rpl-udp example with scalability test
2016-03-26 09:45:36 +01:00
199b1b5316
remove define for SFD interrupt
...
not needed anymore when using MAC timer
2016-03-23 09:10:19 +01:00
3908253038
x86: Add support for (paging-based) protection domains
...
This patch implements a simple, lightweight form of protection domains
using a pluggable framework. Currently, the following plugin is
available:
- Flat memory model with paging.
The overall goal of a protection domain implementation within this
framework is to define a set of resources that should be accessible to
each protection domain and to prevent that protection domain from
accessing other resources. The details of each implementation of
protection domains may differ substantially, but they should all be
guided by the principle of least privilege. However, that idealized
principle is balanced against the practical objectives of limiting the
number of relatively time-consuming context switches and minimizing
changes to existing code.
For additional information, please refer to cpu/x86/mm/README.md.
This patch also causes the C compiler to be used as the default linker
and assembler.
2016-03-21 17:18:06 -07:00
e0d124c7c5
galileo: Add example to print out IMR information
...
This patch adds an example program to print out information about the
configuration of the Intel Quark X1000 SoC Isolated Memory Regions
(IMRs), the Host System Management Mode Controls register, and the
Host Memory I/O Boundary register.
2016-03-17 08:35:49 -07:00
9ab327090c
Merge pull request #1444 from mdlemay/galileo-always-init-gpio
...
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
2016-03-14 20:09:40 +01:00
862e43d9b0
Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
...
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
88a0db6aee
Add missing includes
2016-03-14 14:52:59 +01:00
4bf868fd99
Fix a number of leftover mentions of aaaa as a prefix (now fd00)
2016-03-14 13:56:00 +01:00
cd981b23d5
Merge pull request #1297 from simonduq/pr/default-prefix
...
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-13 20:39:16 +01:00
45c7477650
original node.c
2016-03-11 11:02:43 +01:00
57a47bb12f
node_id on cc2538dk
2016-03-10 18:36:47 +01:00
a4ccce8dac
enable 32 kHz crystal oscillator for TSCH
2016-03-08 15:54:03 +01:00
b32ad0dbbd
define for SFD timestamp on cc2538
2016-03-07 18:37:03 +01:00
dea04c67d7
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-07 17:47:44 +01:00
8b63b41b96
TSCH-security: disable TSCH logs to save ROM, relax checks in 21-z1-rpl-tsch-security.csc accordingly
2016-03-07 17:43:25 +01:00
1219790312
examples/er-rest-example/resources/res-event.c: fix warning: function declaration isn't a prototype
2016-03-02 07:25:19 +01:00
56aeb7cd7e
Added Zolertia Zonik sound sensor test and drivers
2016-02-22 16:49:35 +01:00
934cdbacca
Adapted the ADXL345 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
1be30d52dc
Removed unused blocks and made functions static
2016-02-22 12:08:56 +01:00
151f532225
Adapted the TMP102 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
1f445172ff
galileo: Fix build help message in examples
...
This patch fixes examples/galileo/Makefile so that it actually
displays the intended help message when an unrecognized EXAMPLE is
selected.
2016-02-16 21:19:44 -08:00
b82d92e373
galileo: Add I2C callbacks example
...
This patch adds an example for I2C callbacks that is very similar to
the i2c-LSM9DS0 example except that it uses a PWM device that is built
into the platform.
2016-02-16 21:19:44 -08:00
58874ea25d
x86, galileo: Refactor I2C and GPIO initialization
...
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.
This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration. Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
3e64447631
galileo: Expand README for examples
...
This patch expands the instructions in examples/galileo/README.md.
2016-02-16 21:19:44 -08:00
c9bffe6d5a
galileo: Convert README for examples into README.md
...
This patch renames and reformats examples/galileo/README to use
Markdown.
2016-02-16 21:19:44 -08:00
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
38481c513d
nrf52dk: added examples
2016-02-15 09:37:38 +01:00
c6ded00dc4
Merge pull request #1512 from alignan/pull/fix-z1-websense
...
Fix z1-websense example
2016-02-13 16:35:50 +01:00
b2b573e9e7
Fix z1-websense example
2016-02-12 19:10:02 +01:00
287092db42
Merge pull request #1486 from alignan/pull/cc2538-common
...
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 23:48:35 +01:00
45c125949a
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 17:26:11 +01:00
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
15a5f27080
Adding TSCH to examples/jn516x/rpl
2016-02-01 13:38:53 +01:00
61e619dfcd
Extend the CC26xx web demo to support the LaunchPad
2016-01-28 11:23:20 +00:00
54f0a2ecbd
Extend the CC26xx demo to support the LaunchPad
2016-01-28 11:23:20 +00:00
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00
ec45369d1b
Merge pull request #1466 from alignan/pull/weather-meter
...
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
9bdb1f1794
Merge pull request #1462 from MichaelKlemm/FixCoojaPluginLoad
...
Fixed loading SerialSocketServer plugin in Cooja using FQDN
2016-01-21 09:39:40 +01:00
a6c30b4e09
Fixed missing static keyword in both zoul-demo and weather meter driver
2016-01-19 22:24:53 +01:00
366f11d5df
Uncrustified weather meter driver and example
2016-01-19 18:03:16 +01:00
81bec49a40
Changed fixed 2 minute integration period to allow overriding
2016-01-19 18:00:18 +01:00
0902e0fc6d
Added degree converted value for the wind vane sensor.
...
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
61f1516369
Reworked instant wind speed calculation and extended the available wind speed return values
2016-01-19 17:47:46 +01:00
aacbcd904f
Added interrupt configuration for the weather meter
2016-01-19 17:47:46 +01:00
103911f619
Added driver for the Sparkfun's weather meter station
2016-01-19 17:47:46 +01:00
2295ecdbd9
Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use
2016-01-17 23:04:34 +01:00
503abb4415
ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface
2016-01-17 22:40:06 +01:00
ac07e848b7
Minor fixes to file descriptions and disable DEBUG switches
2016-01-17 21:52:34 +01:00
c792f5cf4b
Merge pull request #1409 from nfi/oma-lwm2m-ipso
...
Implementation of OMA LWM2M Engine / IPSO Objects
2016-01-17 10:20:33 +01:00
c03b05c702
Fixed loading SerialSocketServer plugin in Cooja using FQDN
2016-01-16 12:25:42 +01:00
99f0c9f19b
Merge pull request #1457 from alignan/pull/motion-sensor
...
Add support for digital motion/presence sensors
2016-01-11 20:30:09 +01:00
57f4134c9e
Merge pull request #1454 from alignan/pull/sht25-sensor
...
Fixes and enhancements for the SHT25 sensor
2016-01-11 20:29:14 +01:00
94657b7a72
Merge pull request #1449 from alignan/pull/bmp085-sensor
...
BMP085 barometric sensor for the RE-Mote platform
2016-01-11 20:28:35 +01:00
c644a32dc7
Added support for digital presence/motion sensors
2016-01-11 18:36:31 +01:00
c394302c44
Merge pull request #1446 from alignan/pull/tsl2563-sensor
...
Enhanced TSL2563 driver for the Zoul module (RE-Mote/Firefly)
2016-01-11 11:21:51 +00:00
48eb2a4fe2
Uncrustify changes
2016-01-10 23:36:00 +01:00
d53a62187d
Added extra features of the SHT25 sensor
2016-01-10 23:33:33 +01:00
fa40d2b1fc
Remove documentation references to the Sensinode platform
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:09:31 +00:00
707353f71b
Remove Sensinode platform, cpu, example and tools files
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:01:58 +00:00
7b953091e5
Added BMP085 barometric sensor for the Zoul platform
2016-01-10 04:17:26 +01:00
7abee394cb
Initialized interrupt thresholds and added missing check
2016-01-10 04:09:07 +01:00
ada5c6193e
cc2538dk: pka: Fix missing Makefile.target
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:20 +01:00
f78a132395
cc2538: pka: Fix include paths breakage
...
The PKA drivers and examples were full of include paths missing the
appropriate prefix, or using angle brackets instead of double quotes or
the other way around.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:13 +01:00
a8a1ebf8b5
Added interruption feature to the TSL2563 driver
2016-01-08 15:14:37 +01:00
8456b8333f
Added sensniff support for the CC1200
2016-01-08 14:45:50 +01:00
881e78cb60
Rewamped TSL2563 light sensor
2016-01-07 12:53:31 +01:00
ccceb63e88
cc2538: Add crypto driver and example for AES-GCM
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:54 +01:00
e77e9861fe
cc2538: Add crypto driver and example for AES-CBC-MAC
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
47c24cab11
cc2538: Add crypto driver and example for AES-CTR
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
cf5e9557f8
cc2538: Add crypto driver and example for AES-CBC
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 22:01:41 +01:00
14be5aae88
Merge pull request #1423 from TeVeDe/master
...
Add examples for NXP JN516x using TSCH
2016-01-05 15:54:04 +01:00
68b2b3dd1c
Add examples for NXP JN516x using TSCH
2016-01-05 10:44:13 +01:00
3dbe4c9403
cc2538: Add crypto driver and example for AES-ECB
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
04890b1899
cc2538: ccm: Allow separate input/output buffers
...
This is supported by the hardware, so give access to this feature in the
API.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
ca919ab0b0
Merge pull request #1196 from otcshare/x86
...
New platform: Intel Galileo Board
2015-12-23 12:33:47 +01:00
36ddb737e1
Refactored the example to broadcast a message to the zoul-demo example
2015-12-22 15:16:55 +01:00
5da887c35f
added readme for ipso-objects
2015-12-21 14:39:16 +01:00
ba09b47d65
galileo: Initialize pinmux in i2c-LSM9DS0 example
...
In order to ensure SCL and SDA are exported in the correct pins.
2015-12-21 08:06:14 -02:00
77327181e0
galileo: Add GPIO interrupt example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate interrupt pins.
The application uses default galileo pinmux initialization and sets
the GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as interrupt. It toggles
the output pin stat at every half second in order to emulate an interrupt.
This triggers an interrupt and the application callback is called.
2015-12-21 08:06:14 -02:00
61e06c632a
galileo: Add GPIO input example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate input pins.
The application uses default galileo pinmux initialization and sets the
GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as input. It toggles the
output pin state at every half second and checks the value on input pin.
2015-12-21 08:06:14 -02:00
7dfd753b21
galileo: Add I2C master example
...
This patch adds an example application that shows how to use I2C driver
APIs to communicate with LSM9DS0 sensor. At every 5 seconds, the
application reads the "Who Am I" register from gyroscope sensor and
prints if the register value matches the expected value.
2015-12-21 08:06:14 -02:00
cc51f89b31
galileo: Add GPIO output example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate output pins. The application sets the
GPIO 4 pin as output pin and toggles its state at every half second.
2015-12-21 08:06:14 -02:00
b8056b9c97
examples: Add all-timers example
...
This commit adds a very simple example which is useful to verify
that all timers APIs are working. There are 3 protothreads running,
the first process tests etimer, timer and stimer APIs, the second
process tests the ctimer APIs, and the third one tests the rtimer
APIs.
2015-12-21 08:06:14 -02:00
5e14c22c98
Add support for the RE-Mote on-board power management feature
2015-12-18 16:20:30 +01:00
654bb913f0
Add examples for NXP JN516x using TSCH
2015-12-17 13:29:42 +01:00
834f965c95
Added support for the RE-Mote on-board Real Time Clock Calendar (RTCC)
2015-12-16 18:43:33 +01:00
4a6e19ed38
cc2538: pwm: Automatically disable PM1+ if running
...
The peripheral core clocks of the PWM timers are gated in PM1+, so these
power modes must be disabled if a PWM timer is running. Use
lpm_register_peripheral() to handle this automatically and dynamically.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-12-13 02:39:55 +01:00
7eabf8d391
TSCH: latest update from https://github.com/EIT-ICT-RICH/contiki
2015-12-04 15:21:58 +01:00
f225ff43d3
Added TSCH+RPL example, with support for link-layer security and Orchestra scheduling
2015-12-04 15:21:54 +01:00
bc17cdca2c
Merge pull request #1408 from simonduq/pr/jn516x-update
...
JN516x: tickless clock, power saving update, 32 kHz rtimer
2015-12-03 14:59:53 +01:00
bef32c20fb
jn516x examples: print out network state periodically
2015-12-03 13:57:26 +01:00
7288a364b0
Fixed C&P error.
2015-12-03 09:09:21 +01:00
922bebc68a
Some targets only return from getchar() on newline.
2015-12-02 18:27:54 +01:00
48d1d74f1c
Fixed dacef46b03
2015-12-02 18:24:44 +01:00
3dd11603a7
Implementation of OMA LWM2M Engine / IPSO Objects
2015-12-02 15:40:05 +01:00
e47b309536
Added note in PWM driver and example about PM0
2015-11-30 09:43:35 +01:00
37fcb927be
Added PWM driver for the Zolertia Zoul module and CC2538 platforms
2015-11-25 23:56:29 +01:00
e47c69c170
Merge remote-tracking branch 'upstream/master' into stm32nucleo-spirit1
2015-11-25 12:36:01 +01:00
830f5fb60d
Fixed warnings in Z1 examples
2015-11-24 22:02:05 +01:00
a30154c43e
Fix code style: zoul examples
2015-11-24 21:15:34 +01:00
be1bd9a619
Fix code style: Z1 websense example
2015-11-24 21:15:34 +01:00
e1f6d39857
Fix code style: Z1 main examples
2015-11-24 21:15:34 +01:00
27fd1a5eb8
Updated RE-Mote revision A support and cleaning up Zolertia platforms
2015-11-24 21:15:33 +01:00
673d1d103b
JN516x: minor fixes
2015-11-21 10:23:15 +01:00
41f9ca08e2
Merge with updated master.
2015-11-11 13:42:35 +01:00
4c52b87ac1
Ported jn516x slip-bridge to new uip_fallback_interface
2015-11-10 09:30:36 +01:00
dacef46b03
wget.c: replace deprecated gets with safe fgets
2015-11-10 09:09:31 +01:00
fbd78a7e3b
Merge pull request #1293 from simonduq/pr/fix-warnings
...
Fix a number of compiler warnings and enable -Werror in Travis
2015-11-10 08:49:11 +01:00
8e9da827c0
Several minor adjustments.
2015-11-03 22:09:24 +01:00
fb5d0b7ef0
Made 80 column display a cc65 application attribute.
...
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.
I see three types of application:
* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig
* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget
* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser
Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
2015-10-30 12:42:58 +01:00
e261cda8dc
Compilation flags update: BOARD=ids01a4/5 SENSORBOARD=iks01a1
2015-10-27 12:12:59 +01:00
f2440235b5
Fix CSC & XML export to match .gitattributes
2015-10-22 16:05:40 +02:00
bf41de1be5
Merge pull request #1078 from drandreas/cc2538-crypto
...
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-21 11:24:35 +02:00
2daa3d7377
Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface
...
More flexibility for the fallback interface
2015-10-20 11:33:14 +02:00
8f954fbab5
res-b1-sep-b2.c: fix type of iterator
2015-10-20 10:11:50 +02:00
1634acf2c4
jn516x examples: fix compiler warnings to enable -Wall -Werror compilation
2015-10-20 10:11:46 +02:00
9b6377ecdc
Fix compiler warnings
2015-10-20 10:11:37 +02:00
afe3612c0c
Fix compiler warnings
2015-10-20 10:11:36 +02:00
e3303c7e99
Added missing undef in examples/cc2528dk/sinffer/project-conf.h
2015-10-20 09:37:10 +02:00
c8ec08732c
Fix broken printf in examples/er-rest-example/resource/res-b1-sep-b2.c
2015-10-20 09:37:09 +02:00
9c15d1c42f
Merge pull request #1063 from simonduq/configure-na
...
Default NDP configuration
2015-10-18 20:26:55 +02:00
10bd49a71a
Merge pull request #756 from sieben/dos2unix
...
dos2unix fix
2015-10-18 20:26:07 +02:00
d631270af4
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-18 20:14:17 +02:00
0a6b1cb646
llsec: Added AEAD mode to CCM*
2015-10-14 08:22:44 -07:00
c656a4d1c5
llsec: Fixed style issues in CCM*
2015-10-14 08:22:44 -07:00
2059b6559e
llsec: Let llsec_drivers define their own framer
2015-10-14 08:21:40 -07:00
4e81c87c3a
Fix to sensor-demo license and Readme file.
2015-10-13 12:21:21 +02:00
fc65757114
License headers and code style fixes.
2015-10-09 19:40:39 +02:00
2231cc9b0f
Merge pull request #1266 from drugo72/avr-revival
...
AVR revival: new battery and temperature sensors and er-rest-example for the Raven
2015-09-28 17:52:26 +02:00
2834b41ed6
Merge pull request #1267 from drugo72/rest
...
REST: new observable, periodic temperature resource
2015-09-28 17:52:05 +02:00
94daacd244
Merge pull request #817 from SmallLars/econotag-ecc
...
Addet ECC functions on elliptic curve secp256r1.
2015-09-28 09:45:11 -05:00
f9537b6355
Merge pull request #1219 from simonduq/jn516x-port
...
NXP JN516x Platform
2015-09-25 12:09:52 +02:00
17ff3bb466
Added ECC functions on elliptic curve secp256r1
2015-09-24 14:11:20 +02:00
0780e1a051
Added NXP JN516x examples
2015-09-23 14:38:41 +02:00
76e293c289
Fixes ret value for output fallback iface in tun-bridge.c
2015-09-22 12:53:04 +02:00
561e70b18e
Updated current fallback_interface(s) to return int.
2015-09-22 12:53:04 +02:00
6e91cb3a39
Activate battery and temperature resources
...
if they are supported by the platform.
2015-09-21 23:20:45 +02:00
ba3c167cef
Add a new periodic temperature resource.
...
The temperature sensor is sampled once per second.
If observed, temperature readings are reported on change or every
Max-Age interval (default: 60s).
2015-09-21 23:12:16 +02:00
5a829d818d
er-rest-example leveraging the new rave sensors.
2015-09-21 22:53:48 +02:00
46ffc509c1
Added App/Tool/Example for usage of additional flash on econotag/mc1322x
2015-09-14 20:43:12 +02:00
87970a88a4
Comments and documentation fixes.
2015-09-10 14:28:08 +02:00
b7459a12c1
Added radio sensor.
2015-09-07 19:59:03 +02:00
7a5071dd30
Adding a gitattributes and correcting line-endings
...
https://help.github.com/articles/dealing-with-line-endings/
2015-09-07 15:40:02 +02:00
17aafb9daa
Align to current master
2015-09-04 17:01:04 +02:00
607303ecdd
Merge pull request #1081 from pablocorbalan/light
...
Remove old unused light drivers
2015-08-28 14:13:00 +02:00
bfb29d2f11
Merge pull request #1116 from cetic/pr-uip-clear-buffer
...
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
67045d4012
Export RSSI to default parent in the CC26xx web demo
...
The current version of the CC26xx web demo publishes over MQTT the default parent's IPv6 address and the last observed RSSI of this link. This is collected by active probing (periodic ping).
This commit brings the probing functionality to the example's main code module. The MQTT client keeps publishing as previously, but we now also export the same information through CoAP resources. Configuration is still possible through the example's web server.
2015-08-23 20:41:12 +01:00
bad7eb2bc8
Add a very sleepy CC26xx/CC13xx demo
...
This demonstraties how to combine CC13xx tick suppression, RPL leaf mode and turning off ContikiMAC duty cycling to build an extremely low-consuming firmware.
2015-08-23 20:41:12 +01:00
72b586cb7d
Modify cc26xx examples to play nicely with the CC13xx addition
2015-08-23 20:41:11 +01:00
902b21a326
Merge pull request #1188 from oliverschmidt/master
...
Some finishing touch on the CBM retro targets.
2015-08-08 16:33:59 +02:00
757809196e
Some finishing touch on the CBM retro targets.
2015-08-08 15:41:24 +02:00
5db5524b7f
Remove unneeded headers in sky-shell-exec
2015-08-04 20:39:09 +01:00
e0f72b9545
Clarified that a newline is needed for the echo
2015-07-26 16:17:34 -07:00
86f35536a4
Added new stm32nucleo-spirit1 platform
2015-07-24 16:30:10 +02:00
a0be26d9f1
Merge pull request #1150 from oliverschmidt/master
...
Several retrocomputing config changes.
2015-07-06 09:42:55 +02:00
3315d3069d
Merge pull request #1108 from phoenix-frozen/generify-ccm-star
...
generalised CCM module into lib
2015-07-01 10:44:41 +02:00
00f9eebfab
Changed Telnet server configuration for the Apple II.
...
Having the Telnet server reboot on exit (via ctrl-reset) allows to bring back the full MTU.
2015-06-28 22:25:28 +02:00
a70fbf1bbf
Reconfigured Telnet server.
...
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
2015-06-21 21:07:41 +02:00
fc9d38caba
Reduced default for number of connections.
...
Save some memory by reducing the the default for number of connections from 10 to 2.
2015-06-21 20:58:51 +02:00
1f0fd3f38b
Add uip_ext_len definition in fakeuip.c for ravenusbstick
2015-06-15 15:15:59 +02:00
1784338b2e
Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it
2015-06-15 11:10:51 +02:00
3ce8f26eea
generalised CCM module into lib
...
introduced convenience functions for LLSEC modules
2015-06-10 18:07:41 +01:00
e8a268cd15
cc2538: aes: Add support for 192- and 256-bit keys
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
801315e819
cc2538: aes: Make it possible to have several keys stored at once
...
Several keys can be kept at the same time in the key store, and several
keys can be loaded at once. Give access to these features.
The ccm-test example is also improved to better demonstrate the use of
the key store.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
b92a5afcc4
cc2538: ccm: Make it possible to use the interrupt
...
Using the AES interrupt allows the user process not to waste time
polling for the completion of the operation. This time can be used by
the user process to do something else, or to let the system enter PM0.
Since the system is now free to perform various operations during a
crypto operation, a protection of the crypto resource is added, and PM1+
is prohibited in order not to stall crypto operations.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
117dc4e5e3
cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
330e450ba4
Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094 ).
...
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
2015-05-29 22:04:43 +02:00
2cee62eb33
Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware
...
Update to latest CC26xxware and add it as a submodule
2015-05-21 10:01:00 +02:00
730bda2001
Merge pull request #883 from cmorty/pull/global-macros
...
Move MAX, MIN and ABS to contiki-macros
2015-05-18 21:33:00 +02:00
0dab6926b3
Move MAX, MIN and ABS to sys/cc.h
2015-05-18 08:53:17 +02:00
5f4154a0e3
Adjust AON BatMon usage
2015-05-17 14:09:51 +01:00
32afadea77
Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm
...
CC26xx Ultra Low Power Operation
2015-05-16 10:27:22 +02:00
402eabecca
Merge pull request #929 from lab11/delete-old-coap
...
Delete old CoAP implementation
2015-05-15 15:49:04 +02:00
7e00eeb76a
Achieve lowest consumption with the CC26xx demo:
...
This changes the CC26xx simple demo so that a devices running this firmware will achieve the lowest possible energy consumption without requiring any changes to the example
2015-05-15 09:21:05 +01:00
421fbfae25
Change the LPM locks API:
...
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.
This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
00a6c31158
Improve OPT sensor driver and usage
...
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
b50ae639b3
Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
...
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
869768902b
seedeye powerswitch: update coap
...
The powerswitch app was using old an older implementation of er-coap.
This updates it.
2015-05-14 17:20:46 -04:00
6eaada0c3f
Delete old CoAP implementation
...
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
2015-05-14 17:20:46 -04:00
d64927397f
Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
...
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
e4722bb0ea
Replace SHT21 with HDC1000 in the web demo
2015-05-14 13:20:39 +01:00
62f978b993
Replace SHT21 with HDC1000 in the simple demo
2015-05-14 13:20:39 +01:00
11a5e0a49a
Merge pull request #1051 from simonduq/fix-warning
...
Fixed a number of compiler warnings
2015-05-13 00:52:40 +01:00
49d1782a06
Adjust the MQTT demo to use re-engineered sensors
2015-05-12 23:42:20 +01:00
ac459df128
Re-work the CC2538 demo to use the 3 separate ADC sensors
2015-05-12 23:42:20 +01:00
1ac5d85042
Enable NA in examples that need it
2015-05-10 19:56:38 +02:00
44af0fa66b
Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket
...
New HTTP socket, DNS64, IP64 Cooja tests
2015-05-10 17:14:31 +02:00
bc222ed85c
Code for building an IP64 router
2015-05-10 10:51:11 +02:00
33372945a3
HTTP socket code with support for GET and POST
2015-05-10 10:51:11 +02:00
447be526ae
Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
...
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
6e3197b0bf
Merge pull request #1008 from g-oikonomou/cc26xx/contrib/web-demo-httpd
...
Improve HTTPD in the CC26xx web demo
2015-05-09 22:46:26 +01:00
bd5e35c968
Merge pull request #1052 from simonduq/packetbuf-cleanup
...
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
33526be5ab
Merge pull request #985 from g-oikonomou/cc26xx-minor-updates
...
Minor Updates to the CC26xx Port
2015-05-09 22:29:30 +01:00
38b3b8b74a
Merge pull request #981 from g-oikonomou/cc2538-sniffer-fix
...
Turn on the CC2538 RF explicitly in the sniffer example
2015-05-09 21:56:23 +01:00
4a93f5148d
Fixed a number of compiler warnings
2015-05-08 09:07:20 +02:00
290fc829ea
Consistently use PACKETBUF_ATTR_MAC_SEQNO for MAC sequence number, both input and output. Disable PACKETBUF_ATTR_PACKET_ID in the non-Rime case.
2015-05-06 16:34:44 +02:00
bb76bb8beb
Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled.
2015-05-06 16:34:26 +02:00
f83c4e7286
Improve code style
2015-05-03 22:36:03 +01:00
f7ca4b41a9
Merge pull request #1001 from adamdunkels/pr/queuebuf-no-ref
...
Cleanup: remove the obsolete reference packetbuf
2015-05-03 16:35:17 +02:00
a72d90e283
Control TCP MSS in the project's conf
2015-05-03 13:31:03 +01:00
7acf747c1a
Removed packetbuf references. This was a feature that is not used anymore and only made the code more complex.
2015-04-01 21:33:02 +02:00
b9334a3b0e
Added Reed Sensor driver and example
2015-03-30 10:30:09 +02:00
7730215f99
Point all form action attributes to the current html page
2015-03-27 20:18:58 +00:00
7637164ae7
Parse filename for POST requests
...
so we can return it in the "Location:" header subsequently
2015-03-27 20:18:58 +00:00
54c1cd05e8
Simplify the page name to script mapping
2015-03-27 20:18:58 +00:00
90a3cd8e14
Change the way we handle HTTP response headers
2015-03-27 20:18:58 +00:00
733378679f
Prettify httpd top matter in the web demo
2015-03-27 20:11:44 +00:00
1af29a5beb
Added SHT25 sensor
2015-03-10 15:33:58 +01:00
1fc06b6581
Turn on the CC2538 RF explicitly
2015-02-28 15:01:32 +00:00
bfd2a90e08
Merge pull request #933 from alessandrelli/coap-observe-client
...
Erbium: client-side support for CoAP Observe
2015-02-26 10:06:58 +01:00
0f567e499f
Add CC26xx examples
2015-02-25 13:15:35 +01:00
b6e716233a
er-coap-example: add example for client-side CoAP observe
2015-02-24 22:48:12 +01:00
2bb7fcc0cb
Fixed doxygen formatting
2015-02-17 16:11:45 +01:00
4fb2bd410f
Add title to doxygen group
2015-02-17 16:07:37 +01:00
6112ec54d3
Add MQTT demo for the cc2538dk platform
2015-02-17 15:58:50 +01:00
72914369e8
Re-structure CC2538 doxygen module hierarchy
2015-02-16 10:17:58 +01:00
5699127c9a
additional edits to further clarify interface between native-border-router and slip-radio
2015-02-07 10:51:41 -05:00
a0ac6bceb6
added some documentation of native-border-router and slip-radio relationship
2015-02-03 11:05:13 -05:00
c2ca3e9fdb
Cleanup UIP_CONF_IPV6_RPL configuration
2014-12-02 12:38:55 +01:00
74f6ae3751
slip-radio: remove unneeded definition of NETSTACK_CONF_WITH_RPL (now set from makefile with CONTIKI_WITH_RPL)
2014-12-01 21:04:25 +01:00
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
722b3258d1
Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.
2014-12-01 20:13:09 +01:00
bb645b6287
Merge pull request #877 from gebart/for-upstream/rpl-border-router-webserver-tcp
...
examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS
2014-11-28 19:00:46 +01:00
4a41f147d3
Merge pull request #879 from alignan/fix_rssi_app
...
Fixed rssi scanner application and moved into single example
2014-11-28 19:00:23 +01:00
4f744d858a
Fixed rssi scanner application and moved into single example
2014-11-28 13:07:26 +01:00
1e03cdd553
examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS
...
The example used to rely on the default value being set to 1 which
caused build failures on platforms which have a default UIP_CONF_TCP=0
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-11-26 19:05:32 +01:00
64a4755354
examples/webserver-ipv6: Add UIP_CONF_TCP=1 to DEFINES.
...
TCP is mandatory for this HTTP server.
Fixes builds for platforms which have TCP turned off by default (mulle)
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-11-26 19:03:51 +01:00
6ca95ebc0c
Merge pull request #811 from kkrentz/llsec-renaming
...
llsec renaming
2014-11-07 22:20:15 +01:00
ef6c351d0c
Add function to change I2C baudrate and push relevant configuration values to platform config
2014-10-20 14:23:36 +02:00
27cde1ff81
Merge pull request #824 from alignan/fix_warnings
...
Warning fixes
2014-10-20 11:16:36 +02:00
c836fbfbd9
Fixes warnings, bad code and code style
2014-10-20 10:28:00 +02:00
0579e304e4
llsec: Renamed ccm to ccm_star & Renamed llsec regression test
2014-10-16 09:21:56 -07:00
d891d11324
Merge pull request #557 from kkrentz/llsec-integration
...
Integration of Link Layer Security
2014-10-08 15:45:46 +02:00
d4179a0a0c
examples/rpl-border-router: Fix two minor warnings.
...
- Remove unused variable i in generate_routes.
- Add cast to unsigned long for printf(..%lu..) in generate_routes.
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-10-04 18:05:38 +02:00
7738cdd15e
Avoid compilation warnings in Antelope.
2014-09-05 18:21:47 +02:00
fab4f4144f
Add SHT11 CoAP Resource and Activate Sensors for several CoAP Resources.
2014-08-25 11:36:31 +01:00
2cf7d98cad
ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface
...
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
2014-08-05 05:07:06 -07:00
2687c345cf
llsec: CCM* encryption tests
2014-08-05 05:07:05 -07:00
5e6cf8da36
llsec: CCM* verification tests
2014-08-05 05:07:05 -07:00
c396a85364
llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security
2014-08-04 01:09:57 -07:00
ed7e09ed5b
Merge pull request #755 from sieben/SkyByteRadio
...
SkyByteRadio was replaced by Msp802154Radio
2014-07-24 09:15:45 +02:00
911f3aa07c
SkyByteRadio was replaced by Msp802154Radio
2014-07-23 15:42:59 +02:00
afcd5e5387
Add missing semi-colon
2014-07-16 21:37:47 +02:00
5467674fcc
Merges Z1SP into Z1 platform
2014-07-04 10:41:05 +02:00
24e260910c
Merge pull request #718 from g-oikonomou/rpl-dodagid-compliance
...
Make DODAG ID selection RFC 6550-compliant
2014-06-13 15:33:56 +02:00
14aedabffd
Updated to match the new leds_toggle() API
2014-06-12 20:02:33 +02:00
a9e7bea675
Make DODAG ID selection RFC 6550-compliant
...
Some calls to `rpl_set_root` select a hardcoded DODAG ID
(0x1111, 0x1100, 0, 0, 0, 0, 0, 0x0011)
This is against what RFC 6550 says. We change these calls
to select a DODAG ID corresponding to a routable v6 address
corresponding to the root
2014-06-12 00:09:53 +01:00
eceaf0c59b
Merge pull request #631 from nfi/framer-len
...
Added function to framer that returns the estimated header length
2014-06-11 23:17:47 +02:00
64f65b4e45
Merge pull request #617 from nfi/extended-radio-api
...
Extended radio API with support for setting channel, pan id, addressing modes, etc
2014-06-03 21:32:53 +02:00
2683e13da5
Updated README and Makefile.
2014-05-15 20:29:05 +02:00
a26533f501
Updated Cooja simulations.
2014-05-15 20:29:05 +02:00
386d708b56
Added function for easy block1 usage.
...
Fixed blocksize calculation when REST_MAX_CHUNK_SIZE != 2^x.
Added example for block1 + separate + block2.
2014-05-15 20:29:04 +02:00
bb737f85ae
Used Uncrustify and fixed Travis build errors.
2014-05-15 20:29:04 +02:00
3dd5bd7a37
Renamed erbium to er-coap to avoid confusion and have a meaningful directory name.
2014-05-15 20:29:03 +02:00
7d79b69ada
Updated to CoAP Proposed Standard and removed draft versions.
2014-05-15 20:29:03 +02:00
49b6ad2af5
Use the extended RF API for the cc2530 border router example
2014-04-23 12:16:50 +01:00
Michael LeMay
Antonio Lignan
George Oikonomou
Yasuyuki Tanaka
Simon Duquennoy
Sumankumar Panchal
Nicolas Tsiftes
Robert Olsson
Antonio Lignan
Simon Duquennoy
George Oikonomou
Pablo Corbalán
Benoît Thébaudeau
Thomas
Pere Tuset
Bernhard Hackl
kkrentz
thomas-ha
Oliver Schmidt
Joakim Eriksson
Joakim Nohlgård
Aitor Mejias
Wojciech Bober
Toni Lozano
Fredrik Österlind
Michael Klemm
Theo van Daele
Ricardo de Almeida Gonzaga
Jesus Sanchez-Palencia
Niclas Finne
Marco Grella
Rémy Léone
Adam Dunkels
AntiCat
Mariano Alvira
Lars Schmertmann
Víctor Ariño
Cristiano De Alti
Adam Dunkels
Jonas Olsson
Joe Andrieu
Laurent Deru
Justin King-Lacroix
Moritz 'Morty' Strübe
Brad Campbell
George Oikonomou
Daniele Alessandrelli
Michael Richardson
Joakim Gebart
kkrentz
Benjamin Cabé
Matthias Kovatsch