f4a8cba371
Rehauled doxygen commenting and fixed TI drivers configuration
2018-08-31 11:04:48 +02:00
8cd6017305
Cleanup in config
2018-08-31 11:04:47 +02:00
e0bd086b3b
Ported BLE beacond, fixed IEEE_RX_ACK.
2018-08-31 11:04:47 +02:00
f307794b39
Reworked RF driver into scheduler
2018-08-31 11:04:46 +02:00
315bfc00d3
Added SUPPORT_BLE_BEACON flag
2018-08-31 11:04:46 +02:00
924e4f5ea5
Removed unused files.
2018-08-31 11:04:45 +02:00
bb00eaa041
Normalized GPIO HAL, fixed LEDS & Buttons HAL, and aligned sensortag and
...
SRF06 boards
2018-08-31 11:04:45 +02:00
d4828c7baf
Fixed GPIO HAL issue.
2018-08-31 11:04:44 +02:00
f3a030b0a4
Fixed button-sensor for launchpad
2018-08-31 11:04:44 +02:00
12a6eefa85
Lots of fixes for prop-mode and ieee-mode
2018-08-31 11:04:44 +02:00
f6b016c5d4
Working prop-mode
2018-08-31 11:04:44 +02:00
f9fcbd6a77
Fixed IEEE settings, aligned naming of RF commands
2018-08-31 11:04:44 +02:00
7b812e73c9
Fixed naming and alignment of RF settings, Watchdog driver, Board files
2018-08-31 11:04:44 +02:00
2d69241381
Fixed CC2650STK board files, and leds-arch for sensortag
2018-08-31 11:04:43 +02:00
40227d0817
Fixed RF Settings, Board files, Sensortag sensors
2018-08-31 11:04:43 +02:00
745c2b24b6
Fixed RF settings and Board files
2018-08-31 11:04:42 +02:00
02b812a631
[Feature]: Simplelink Platform for Simplelink SDK
...
Working Simplelink platform with the following Simplelink SDK's:
* CC13x0 SDK
* CC13x2 SDK
* CC26x2 SDK
Is also compatible with Code Composer Studio (XDCTools)
2018-08-31 11:04:41 +02:00
a76462b908
Initial commit of Simplelink rework
2018-08-31 11:04:40 +02:00
7e96029211
Initial try of structuring platform dependent code
2018-08-31 11:04:39 +02:00
6007b1be07
Implemented the Contiki leds driver
...
NB! This is by no means a future-proof implementation. However, it
should be a good starting point. Configuration of the LEDS_ARCH_*
defines in the leds-arch.c file is what determines what LEDs are
available of a given device/target. This information should be
sufficient from the Board file/device name, and can from there
hardcod what board+device combination a given LED should support.
2018-08-31 11:04:39 +02:00
5c058b9c52
Refactored after PR review
2018-08-31 11:04:39 +02:00
7f813e8e0e
Compiling and untested IEEE mode radio driver
2018-08-31 11:04:39 +02:00
2d198a7858
Enable proper standby and idle. Just one line, thats it.
2018-08-31 11:04:39 +02:00
56721d13cf
Working prop rf driver
2018-08-31 11:04:39 +02:00
0102628245
Prop RF driver now complete
2018-08-31 11:04:39 +02:00
2b0091246d
UART0 arch driver impl
...
* Async read
* Renamed driver to uart0-arch
* Renamed arch/cpu source folder to dev/
2018-08-31 11:04:38 +02:00
b30ef7d56d
Added async read on UART
2018-08-31 11:04:38 +02:00
c99c3b4b5f
Rewriting clock module based upon DPL
2018-08-31 11:04:38 +02:00
c8023df8a5
Added UART serial interface printing
2018-08-31 11:04:38 +02:00
765e35ba7f
Added working simplelink platform without netstack
2018-08-31 11:04:38 +02:00
f83579098b
Resolve remarks
2018-08-31 11:04:37 +02:00
8cee2abae6
List only directories
2018-08-31 11:04:37 +02:00
a40e5bc314
Build the board file and add all libraries from the SDK
2018-08-31 11:04:37 +02:00
12c9056cec
Cleaned up CCFG configuration, and aligned CC13x0_cc26x0 and
...
CC13x2_CC26x2 CPU conf
2018-08-31 11:04:37 +02:00
c7aaefb4da
Add board file deduction logic and board init stages
2018-08-31 11:04:37 +02:00
ddd451a19b
Compiling example of dummy simplelink platform
2018-08-31 11:04:37 +02:00
81b782636a
Initial port
2018-08-31 11:04:37 +02:00
4dbba4df9a
Platform native: overprovision routes, neighbor table and queues
2018-06-05 14:08:02 +02:00
11f563dc98
Harmonize login, serialdump and serialvew across all platforms
2018-05-26 13:55:03 +01:00
37f14efad5
Harmonize building of tools from within an example dir
2018-05-26 13:55:02 +01:00
1f5d109f33
Remove left-over instances of WITH_TINYOS_AUTO_IDS
2018-05-25 12:49:35 -07:00
3889ffe750
Simplify and homogenize node-id across all platforms
2018-05-18 14:08:24 -07:00
90b5d2a149
Differentiate flash part across sensortag/cc2650 versions
...
Older CC2650 sensortags have a Winbond W25X40CL 4MBit SPI flash. Newer ones have a Macronix MX25R8035F 8MBit part. The parts have almost identical instruction sets and are both supported by our generic external flash driver. The key difference between the two parts is that they have different Manufacturer and Device IDs.
This commit allows us to switch between the two: We default to the new revision, and allow users to build for the older one by defining `SENSORTAG_CC2650_REV_1_2_0` to 1.
Current tags are version 1.5.1. Older tags are version 1.2.0. To identify older tags, look for "Rev: 1.2" printed on the PCB. They should also have a sticker that reads "Rev: 1.3.0" and "HW Rev 1.2.0".
2018-05-18 15:06:58 +01:00
9de0f76b83
Merge remote-tracking branch 'origin/develop' into contrib/sicslowpan
2018-05-13 06:41:12 -07:00
5ef74e9cfc
Merge branch 'develop' into contrib/rtimer-config
2018-05-11 21:10:33 +02:00
0b9f03f442
fixed dht22 driver
2018-05-09 19:29:24 -07:00
51a4960fa8
fixed dht22 driver and example
2018-05-09 19:25:08 -07:00
2ba54edaec
Tidy-up renode for OS X and enable for all CC2538DK
2018-04-28 15:02:05 +01:00
4da9202d22
Add lrwrap to login and native BR
2018-04-26 03:00:04 -07:00
f9a1f958e1
Merge remote-tracking branch 'origin/release-4.1' into develop
2018-04-20 08:37:14 -07:00
Edvard Pettersen
Richard Weickelt
Simon Duquennoy
George Oikonomou
Antonio Iannopollo