George Oikonomou
63417cba0e
Remove legacy zoul/CC1200 sniffer example
2016-08-12 01:23:50 +01:00
George Oikonomou
32e4f0f432
Remove legacy CC2538 sniffer example
2016-08-12 01:23:50 +01:00
George Oikonomou
fa769b98e9
Remove legacy CC2530 sniffer example
2016-08-12 01:23:49 +01:00
Simon Duquennoy
21387b954f
Merge pull request #1493 from simonduq/pr/add-missing-ext-hdr
...
Insert RPL ext header before sending ICMP, UDP and TCP messages
2016-07-25 14:56:25 +02:00
Simon Duquennoy
ff5a4751c8
Merge pull request #1610 from simonduq/pr/tsch-rime
...
TSCH with Rime
2016-07-25 14:55:37 +02:00
Sumankumar Panchal
6dfd358821
TSCH port for CC2538 based platforms.
2016-07-22 09:38:25 +05:30
George Oikonomou
94413f99fe
Shrink ND cache and routing table for the CC26xx web demo
2016-07-17 01:31:21 +01:00
George Oikonomou
9839b91be5
Enable the ROM bootloader in our examples
2016-07-17 00:26:52 +01:00
Nicolas Tsiftes
afa8125913
Merge pull request #1777 from herjulf/master
...
Fix README.md not reference GPL
2016-07-15 20:30:06 +02:00
Robert Olsson
fbf3daa564
Fix README.md not reference GPL
2016-07-15 17:44:20 +02:00
Antonio Lignan
d5e2a779d4
Added DHT22 sensor to Zoul-based platforms
2016-07-04 18:00:09 +02:00
Simon Duquennoy
7a1576815e
rpl-tsch example: use RPL non-storing mode
2016-06-30 18:15:23 +02:00
Simon Duquennoy
3e987ec138
Border router: include RPL links in HTTP reply when non-storing mode is enabled
2016-06-29 17:07:00 +02:00
Yasuyuki Tanaka
ca3a4726d1
Rename two macros related to multicast, which are not user configuration
...
- UIP_CONF_IPV6_MULTICAST -> UIP_IPV6_MULTICAST
- RPL_CONF_MULTICAST -> RPL_WITH_MULTICAST
2016-06-20 16:35:09 +02:00
George Oikonomou
4b67e21d2e
Merge pull request #1714 from alignan/pull/add-relay
...
Added generic relay driver for the zoul-based platforms
2016-06-13 19:45:46 +01:00
Sumankumar Panchal
373fda46f7
TSCH port for Zolertia ReMote/Zoul.
2016-06-12 16:37:01 +05:30
Simon Duquennoy
809883e632
Making example tsch-rime more flexible
2016-06-10 20:59:40 +02:00
Simon Duquennoy
78f04fda83
Added example of TSCH used with Rime
2016-06-10 20:58:57 +02:00
Antonio Lignan
092f0e62fe
Added generic relay driver for the zoul-based platforms
2016-06-09 15:53:25 +02:00
Simon Duquennoy
b32b3f6666
RPL non-storing: add compile-test to also check for warnings
2016-06-08 14:03:22 +02:00
Simon Duquennoy
1a7133bbf2
Simplified configuration of RPL non-storing mode
2016-06-08 14:03:21 +02:00
Simon Duquennoy
2fe2a28439
Make some of the rpl examples configurable in non-storing mode
2016-06-08 14:03:10 +02:00
Antonio Lignan
ee0b02c819
Merge pull request #1684 from g-oikonomou/contrib/cc26xx/aux-ctrl-and-adc
...
Add CC13xx/CC26xx AUX controller module, ADC support, ALS driver and example
2016-06-07 14:36:28 +02:00
Antonio Lignan
b3faefe602
Merge pull request #1433 from mdlemay/x86-mm
...
X86 memory management
2016-06-05 13:49:49 +02:00
Simon Duquennoy
6c946319d9
Merge pull request #1667 from alignan/pull/at-driver
...
AT driver (master) and example
2016-06-04 22:47:24 +02:00
Simon Duquennoy
64679642f2
Saving ROM and RAM
2016-06-03 16:44:06 +02:00
Simon Duquennoy
5097842cba
Merge pull request #1688 from tsparber/fix-rssi-scanner
...
Fixed rssi-scanner example
2016-06-03 10:12:02 +02:00
Simon Duquennoy
3c9593f3ab
Merge pull request #1692 from pablocorbalan/unicast-sent-cb
...
RIME: Extend unicast example to include a sent callback.
2016-06-03 10:10:36 +02:00
Simon Duquennoy
26bf33c762
Merge pull request #1550 from thomas-ha/tsch-cc2538-port
...
Port of TSCH for CC2538
2016-06-02 21:33:55 +02:00
Antonio Lignan
acf13a4e0d
Merge pull request #1606 from OpenMote/master
...
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
2016-06-01 23:15:27 +02:00
Antonio Lignan
9e1c378919
Merge pull request #1469 from wbober/nrf52dk-pr
...
Add support for nRF52 DK platform
2016-06-01 23:11:39 +02:00
Pablo Corbalán
101575fbe2
RIME: Extend unicast example to include a sent callback.
...
This PR simply adds a packet sent callback to the unicast connection used in the example. Every time a packet is sent the callback is called and prints the linkaddr_t dest, the MAC status of the message sent, and the link layer number of transmissions of the packet. This can be used to compute link quality estimations.
2016-06-01 00:35:49 +01:00
Benoît Thébaudeau
5b3432547e
cfs-coffee: examples: Add support for CC2538
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-01 00:19:52 +02:00
Benoît Thébaudeau
6df2b91a31
test-coffee: Fix the garbage collection test
...
This test could sometimes fail because of a lack of free contiguous
pages in the file system. Fix this by removing the created files at the
end of each test. Besides, the test files do not have to be removed at
the beginning of each test since the file system is initially formatted.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
003b4b0d63
test-coffee: Fix the file modification test
...
The r variable was used instead of i to fill the buffer, resulting in
the end of the test loop after only a single iteration. The file was not
even closed at the end of each iteration although it is opened at the
beginning of each iteration, so the available file descriptors would
very quickly be exhausted.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
150b9fbd8b
test-coffee: Fix test filenames
...
The filenames were mixed up between some of the tests, thus breaking the
purpose of these tests.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
76429e4f0e
test-coffee: Fix numbering of test failure cases
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:13 +02:00
Benoît Thébaudeau
5d227b92a3
test-cfs: Fix possible test failure after reboot
...
Remove the file at the beginning of the test, before opening it for
writing, in order to start the test with an empty file system, not only
after flashing the test, but also following every reboot.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:12 +02:00
Antonio Lignan
e23c175699
cfs-coffee: examples: Fix coding style
2016-05-30 23:05:12 +02:00
Antonio Lignan
4ed5c50a4e
Make CFS and Coffee examples platform-independent
...
Move the CFS and Coffee examples from sky to a common cfs-coffee folder
in order to have unified examples for multiple platforms.
2016-05-30 23:05:12 +02:00
Antonio Lignan
334e38339e
Fixed rssi-scanner example
2016-05-30 10:53:20 +02:00
George Oikonomou
5a39df1439
Demonstrate ALS support in the CC26xx demo
2016-05-29 15:05:13 +01:00
George Oikonomou
c5bea81bb6
Merge pull request #1530 from herjulf/avr-rss2
...
Adding AtMegaXXRFR2 support and avr-rss2 platform
2016-05-15 20:38:50 +01:00
Antonio Lignan
2b30370b42
AT driver (master) and example
2016-05-15 12:19:04 +02:00
Robert Olsson
d331d39e93
Correct paths when moving examples for regession tests
2016-05-14 22:48:09 +02:00
Robert Olsson
3c19e870f1
Moving the avr-rss2 platform examples to the global examples
...
location as suggested by the maintainers.
2016-05-14 12:05:19 +02:00
Thomas
4870f9e8f3
Fix for IPv6 compilation and linkage errors
...
Two errors have been spotted, when IPv6 is enabled in the ravenusb
Project-Makefile:
#CONTIKI_NO_NET=1
CONTIKI_WITH_IPV6=1
The compile error results from a variable name mismatch in cdc_task.c
The variable 'r' is undeclared and should be renamed to 'route'
The linker also fails with 'undefined references'
This has been mediated by adding 'core/net' to Modules in the
Project-Makefile.
2016-05-09 18:18:28 +02:00
Antonio Lignan
bea58c15bd
Merge pull request #1485 from g-oikonomou/contrib/cc2650/launchpad
...
Add support for the CC2650 LaunchPad (LAUNCHXL-CC2650)
2016-04-29 11:13:05 +02:00
Antonio Lignan
a70b9bc277
Merge pull request #1447 from alignan/pull/cc1200-sensniff
...
Added sensniff support for the CC1200
2016-04-27 23:59:45 +02:00
Pere Tuset
70d94133ea
Updated OpenMote example and platform.
2016-04-25 01:50:23 +02:00
Michael LeMay
73774def6b
x86, galileo: Add sample non-driver protection domain
...
This patch adds a simple non-driver protection domain sample to serve
as an example for defining other non-driver protection domains. It
simply performs a ping-pong test of protection domain switching
latency during boot, including optional accesses to a private metadata
region, and prints out the results.
2016-04-22 08:16:43 -07:00
Nicolas Tsiftes
fb5f0f66dd
Removed Deluge and associated test files.
2016-04-21 13:24:16 +02:00
Nicolas Tsiftes
be13fc7d23
Merge pull request #1605 from tonnenpinguin/pr_fix_slip_config
...
Add typecast to native border router switch statement
2016-04-20 12:51:43 +02:00
Bernhard Hackl
2ad3d85d41
Fix slip config switch statement
2016-04-20 08:14:08 +00:00
Pere Tuset
d9f4d97a41
Adapted OpenMote-CC2538 sensor drivers to Contiki sensor API.
2016-04-19 22:41:40 +02:00
Simon Duquennoy
d828557563
Merge pull request #1425 from kkrentz/llsec-fixes
...
random LLSEC fixes
2016-04-19 17:29:00 +02:00
George Oikonomou
040bada378
Merge pull request #1590 from OpenMote/master
...
Add OpenMote-CC2538 platform and examples.
2016-04-18 21:26:15 +01:00
Pere Tuset
3e00ea55d1
Updated the OpenMote-CC2538 platform and examples.
2016-04-18 16:48:48 +02:00
kkrentz
4a88e9e537
llsec: Removed TSCH_SECURITY_CONF_LEVEL and TSCH_SECURITY_LEVEL
2016-04-13 09:16:08 -07:00
kkrentz
10d8b05bc6
llsec: Permit dynamic security levels
2016-04-13 07:54:46 -07:00
Antonio Lignan
8f064511d3
Merge pull request #1213 from joakimeriksson/dao_ack_handling
...
End-to-End DAO and DAO ACK handling for Contiki RPL.
2016-04-11 18:53:43 +02:00
Pere Tuset
1d3c37d6da
Add OpenMote-CC2538 platform and examples.
2016-04-11 12:35:02 +02:00
thomas-ha
a7b43de535
add comment, use spaces
2016-04-06 16:54:45 +02:00
Oliver Schmidt
b287351d99
Activated CBM PFS for the C64 Telnet server.
...
Now that the CBM PFS supports file removal (and a file seek stub) it is possible to have the Telnet server leverage the IDE64 support of the CBM PFS.
Note: Using the CBM PFS for the Telnet server does _not_ reduce the code size since the POSIX I/O functions are additionally still linked in because the POSIX directory functions internally use the POSIX I/O functions. And that's the very reason why the CBM PFS is _not_ activated for the C128 Telnet server: The CBM PFS for the C128 doesn't bring IDE64 support but is supposed to be used to reduce code size - but this isn't possible for the Telnet server.
2016-03-28 19:43:51 +02:00
Joakim Eriksson
12ac02650b
fixed a bug in nbr policy and DAO retransmission handling and added new wismote simulation
2016-03-26 09:45:39 +01:00
Joakim Eriksson
ee97dc4bcd
tuned configuration for rpl-collect and micaz platform
2016-03-26 09:45:39 +01:00
Joakim Eriksson
1d92359e72
Replaced MRHof with OF-0 for getting code-size down for er-example
2016-03-26 09:45:37 +01:00
Joakim Eriksson
60dc6503e5
disabled DAO ACK and configured for only one DAG per instance to save memory for er-example
2016-03-26 09:45:37 +01:00
Joakim Eriksson
f4255fad0f
updated rpl-udp example with scalability test
2016-03-26 09:45:36 +01:00
thomas-ha
199b1b5316
remove define for SFD interrupt
...
not needed anymore when using MAC timer
2016-03-23 09:10:19 +01:00
Michael LeMay
3908253038
x86: Add support for (paging-based) protection domains
...
This patch implements a simple, lightweight form of protection domains
using a pluggable framework. Currently, the following plugin is
available:
- Flat memory model with paging.
The overall goal of a protection domain implementation within this
framework is to define a set of resources that should be accessible to
each protection domain and to prevent that protection domain from
accessing other resources. The details of each implementation of
protection domains may differ substantially, but they should all be
guided by the principle of least privilege. However, that idealized
principle is balanced against the practical objectives of limiting the
number of relatively time-consuming context switches and minimizing
changes to existing code.
For additional information, please refer to cpu/x86/mm/README.md.
This patch also causes the C compiler to be used as the default linker
and assembler.
2016-03-21 17:18:06 -07:00
Michael LeMay
e0d124c7c5
galileo: Add example to print out IMR information
...
This patch adds an example program to print out information about the
configuration of the Intel Quark X1000 SoC Isolated Memory Regions
(IMRs), the Host System Management Mode Controls register, and the
Host Memory I/O Boundary register.
2016-03-17 08:35:49 -07:00
Nicolas Tsiftes
9ab327090c
Merge pull request #1444 from mdlemay/galileo-always-init-gpio
...
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
2016-03-14 20:09:40 +01:00
Nicolas Tsiftes
862e43d9b0
Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
...
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
Simon Duquennoy
88a0db6aee
Add missing includes
2016-03-14 14:52:59 +01:00
Simon Duquennoy
4bf868fd99
Fix a number of leftover mentions of aaaa as a prefix (now fd00)
2016-03-14 13:56:00 +01:00
Simon Duquennoy
cd981b23d5
Merge pull request #1297 from simonduq/pr/default-prefix
...
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-13 20:39:16 +01:00
thomas-ha
45c7477650
original node.c
2016-03-11 11:02:43 +01:00
thomas-ha
57a47bb12f
node_id on cc2538dk
2016-03-10 18:36:47 +01:00
thomas-ha
a4ccce8dac
enable 32 kHz crystal oscillator for TSCH
2016-03-08 15:54:03 +01:00
thomas-ha
b32ad0dbbd
define for SFD timestamp on cc2538
2016-03-07 18:37:03 +01:00
Simon Duquennoy
dea04c67d7
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-07 17:47:44 +01:00
Simon Duquennoy
8b63b41b96
TSCH-security: disable TSCH logs to save ROM, relax checks in 21-z1-rpl-tsch-security.csc accordingly
2016-03-07 17:43:25 +01:00
Joakim Nohlgård
1219790312
examples/er-rest-example/resources/res-event.c: fix warning: function declaration isn't a prototype
2016-03-02 07:25:19 +01:00
Aitor Mejias
56aeb7cd7e
Added Zolertia Zonik sound sensor test and drivers
2016-02-22 16:49:35 +01:00
Antonio Lignan
934cdbacca
Adapted the ADXL345 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Antonio Lignan
1be30d52dc
Removed unused blocks and made functions static
2016-02-22 12:08:56 +01:00
Antonio Lignan
151f532225
Adapted the TMP102 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Michael LeMay
1f445172ff
galileo: Fix build help message in examples
...
This patch fixes examples/galileo/Makefile so that it actually
displays the intended help message when an unrecognized EXAMPLE is
selected.
2016-02-16 21:19:44 -08:00
Michael LeMay
b82d92e373
galileo: Add I2C callbacks example
...
This patch adds an example for I2C callbacks that is very similar to
the i2c-LSM9DS0 example except that it uses a PWM device that is built
into the platform.
2016-02-16 21:19:44 -08:00
Michael LeMay
58874ea25d
x86, galileo: Refactor I2C and GPIO initialization
...
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.
This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration. Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
Michael LeMay
3e64447631
galileo: Expand README for examples
...
This patch expands the instructions in examples/galileo/README.md.
2016-02-16 21:19:44 -08:00
Michael LeMay
c9bffe6d5a
galileo: Convert README for examples into README.md
...
This patch renames and reformats examples/galileo/README to use
Markdown.
2016-02-16 21:19:44 -08:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Wojciech Bober
38481c513d
nrf52dk: added examples
2016-02-15 09:37:38 +01:00
Antonio Lignan
c6ded00dc4
Merge pull request #1512 from alignan/pull/fix-z1-websense
...
Fix z1-websense example
2016-02-13 16:35:50 +01:00
Antonio Lignan
b2b573e9e7
Fix z1-websense example
2016-02-12 19:10:02 +01:00
Benoît Thébaudeau
287092db42
Merge pull request #1486 from alignan/pull/cc2538-common
...
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 23:48:35 +01:00
Antonio Lignan
45c125949a
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 17:26:11 +01:00
Simon Duquennoy
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
Simon Duquennoy
15a5f27080
Adding TSCH to examples/jn516x/rpl
2016-02-01 13:38:53 +01:00
George Oikonomou
61e619dfcd
Extend the CC26xx web demo to support the LaunchPad
2016-01-28 11:23:20 +00:00
George Oikonomou
54f0a2ecbd
Extend the CC26xx demo to support the LaunchPad
2016-01-28 11:23:20 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
Antonio Lignan
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
Antonio Lignan
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00
Antonio Lignan
ec45369d1b
Merge pull request #1466 from alignan/pull/weather-meter
...
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
Fredrik Österlind
9bdb1f1794
Merge pull request #1462 from MichaelKlemm/FixCoojaPluginLoad
...
Fixed loading SerialSocketServer plugin in Cooja using FQDN
2016-01-21 09:39:40 +01:00
Antonio Lignan
a6c30b4e09
Fixed missing static keyword in both zoul-demo and weather meter driver
2016-01-19 22:24:53 +01:00
Antonio Lignan
366f11d5df
Uncrustified weather meter driver and example
2016-01-19 18:03:16 +01:00
Antonio Lignan
81bec49a40
Changed fixed 2 minute integration period to allow overriding
2016-01-19 18:00:18 +01:00
Antonio Lignan
0902e0fc6d
Added degree converted value for the wind vane sensor.
...
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
Antonio Lignan
61f1516369
Reworked instant wind speed calculation and extended the available wind speed return values
2016-01-19 17:47:46 +01:00
Antonio Lignan
aacbcd904f
Added interrupt configuration for the weather meter
2016-01-19 17:47:46 +01:00
Antonio Lignan
103911f619
Added driver for the Sparkfun's weather meter station
2016-01-19 17:47:46 +01:00
Antonio Lignan
2295ecdbd9
Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use
2016-01-17 23:04:34 +01:00
Antonio Lignan
503abb4415
ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface
2016-01-17 22:40:06 +01:00
Antonio Lignan
ac07e848b7
Minor fixes to file descriptions and disable DEBUG switches
2016-01-17 21:52:34 +01:00
Simon Duquennoy
c792f5cf4b
Merge pull request #1409 from nfi/oma-lwm2m-ipso
...
Implementation of OMA LWM2M Engine / IPSO Objects
2016-01-17 10:20:33 +01:00
Michael Klemm
c03b05c702
Fixed loading SerialSocketServer plugin in Cooja using FQDN
2016-01-16 12:25:42 +01:00
Antonio Lignan
99f0c9f19b
Merge pull request #1457 from alignan/pull/motion-sensor
...
Add support for digital motion/presence sensors
2016-01-11 20:30:09 +01:00
Antonio Lignan
57f4134c9e
Merge pull request #1454 from alignan/pull/sht25-sensor
...
Fixes and enhancements for the SHT25 sensor
2016-01-11 20:29:14 +01:00
Antonio Lignan
94657b7a72
Merge pull request #1449 from alignan/pull/bmp085-sensor
...
BMP085 barometric sensor for the RE-Mote platform
2016-01-11 20:28:35 +01:00
Antonio Lignan
c644a32dc7
Added support for digital presence/motion sensors
2016-01-11 18:36:31 +01:00
George Oikonomou
c394302c44
Merge pull request #1446 from alignan/pull/tsl2563-sensor
...
Enhanced TSL2563 driver for the Zoul module (RE-Mote/Firefly)
2016-01-11 11:21:51 +00:00
Antonio Lignan
48eb2a4fe2
Uncrustify changes
2016-01-10 23:36:00 +01:00
Antonio Lignan
d53a62187d
Added extra features of the SHT25 sensor
2016-01-10 23:33:33 +01:00
George Oikonomou
fa40d2b1fc
Remove documentation references to the Sensinode platform
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:09:31 +00:00
George Oikonomou
707353f71b
Remove Sensinode platform, cpu, example and tools files
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:01:58 +00:00
Antonio Lignan
7b953091e5
Added BMP085 barometric sensor for the Zoul platform
2016-01-10 04:17:26 +01:00
Antonio Lignan
7abee394cb
Initialized interrupt thresholds and added missing check
2016-01-10 04:09:07 +01:00
Benoît Thébaudeau
ada5c6193e
cc2538dk: pka: Fix missing Makefile.target
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:20 +01:00
Benoît Thébaudeau
f78a132395
cc2538: pka: Fix include paths breakage
...
The PKA drivers and examples were full of include paths missing the
appropriate prefix, or using angle brackets instead of double quotes or
the other way around.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-09 15:43:13 +01:00
Antonio Lignan
a8a1ebf8b5
Added interruption feature to the TSL2563 driver
2016-01-08 15:14:37 +01:00
Antonio Lignan
8456b8333f
Added sensniff support for the CC1200
2016-01-08 14:45:50 +01:00
Antonio Lignan
881e78cb60
Rewamped TSL2563 light sensor
2016-01-07 12:53:31 +01:00
Benoît Thébaudeau
ccceb63e88
cc2538: Add crypto driver and example for AES-GCM
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:54 +01:00
Benoît Thébaudeau
e77e9861fe
cc2538: Add crypto driver and example for AES-CBC-MAC
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
47c24cab11
cc2538: Add crypto driver and example for AES-CTR
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 23:22:53 +01:00
Benoît Thébaudeau
cf5e9557f8
cc2538: Add crypto driver and example for AES-CBC
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-06 22:01:41 +01:00
Simon Duquennoy
14be5aae88
Merge pull request #1423 from TeVeDe/master
...
Add examples for NXP JN516x using TSCH
2016-01-05 15:54:04 +01:00
Theo van Daele
68b2b3dd1c
Add examples for NXP JN516x using TSCH
2016-01-05 10:44:13 +01:00
Benoît Thébaudeau
3dbe4c9403
cc2538: Add crypto driver and example for AES-ECB
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
Benoît Thébaudeau
04890b1899
cc2538: ccm: Allow separate input/output buffers
...
This is supported by the hardware, so give access to this feature in the
API.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-01-04 00:28:26 +01:00
Antonio Lignan
ca919ab0b0
Merge pull request #1196 from otcshare/x86
...
New platform: Intel Galileo Board
2015-12-23 12:33:47 +01:00
Antonio Lignan
36ddb737e1
Refactored the example to broadcast a message to the zoul-demo example
2015-12-22 15:16:55 +01:00
Joakim Eriksson
5da887c35f
added readme for ipso-objects
2015-12-21 14:39:16 +01:00
Ricardo de Almeida Gonzaga
ba09b47d65
galileo: Initialize pinmux in i2c-LSM9DS0 example
...
In order to ensure SCL and SDA are exported in the correct pins.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
77327181e0
galileo: Add GPIO interrupt example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate interrupt pins.
The application uses default galileo pinmux initialization and sets
the GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as interrupt. It toggles
the output pin stat at every half second in order to emulate an interrupt.
This triggers an interrupt and the application callback is called.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
61e06c632a
galileo: Add GPIO input example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate input pins.
The application uses default galileo pinmux initialization and sets the
GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as input. It toggles the
output pin state at every half second and checks the value on input pin.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
7dfd753b21
galileo: Add I2C master example
...
This patch adds an example application that shows how to use I2C driver
APIs to communicate with LSM9DS0 sensor. At every 5 seconds, the
application reads the "Who Am I" register from gyroscope sensor and
prints if the register value matches the expected value.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga
cc51f89b31
galileo: Add GPIO output example
...
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate output pins. The application sets the
GPIO 4 pin as output pin and toggles its state at every half second.
2015-12-21 08:06:14 -02:00
Jesus Sanchez-Palencia
b8056b9c97
examples: Add all-timers example
...
This commit adds a very simple example which is useful to verify
that all timers APIs are working. There are 3 protothreads running,
the first process tests etimer, timer and stimer APIs, the second
process tests the ctimer APIs, and the third one tests the rtimer
APIs.
2015-12-21 08:06:14 -02:00
Antonio Lignan
5e14c22c98
Add support for the RE-Mote on-board power management feature
2015-12-18 16:20:30 +01:00
Theo van Daele
654bb913f0
Add examples for NXP JN516x using TSCH
2015-12-17 13:29:42 +01:00
Antonio Lignan
834f965c95
Added support for the RE-Mote on-board Real Time Clock Calendar (RTCC)
2015-12-16 18:43:33 +01:00
Benoît Thébaudeau
4a6e19ed38
cc2538: pwm: Automatically disable PM1+ if running
...
The peripheral core clocks of the PWM timers are gated in PM1+, so these
power modes must be disabled if a PWM timer is running. Use
lpm_register_peripheral() to handle this automatically and dynamically.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-12-13 02:39:55 +01:00
Simon Duquennoy
7eabf8d391
TSCH: latest update from https://github.com/EIT-ICT-RICH/contiki
2015-12-04 15:21:58 +01:00
Simon Duquennoy
f225ff43d3
Added TSCH+RPL example, with support for link-layer security and Orchestra scheduling
2015-12-04 15:21:54 +01:00
Simon Duquennoy
bc17cdca2c
Merge pull request #1408 from simonduq/pr/jn516x-update
...
JN516x: tickless clock, power saving update, 32 kHz rtimer
2015-12-03 14:59:53 +01:00
Simon Duquennoy
bef32c20fb
jn516x examples: print out network state periodically
2015-12-03 13:57:26 +01:00
Oliver Schmidt
7288a364b0
Fixed C&P error.
2015-12-03 09:09:21 +01:00
Oliver Schmidt
922bebc68a
Some targets only return from getchar() on newline.
2015-12-02 18:27:54 +01:00
Oliver Schmidt
48d1d74f1c
Fixed dacef46b03
2015-12-02 18:24:44 +01:00
Niclas Finne
3dd11603a7
Implementation of OMA LWM2M Engine / IPSO Objects
2015-12-02 15:40:05 +01:00
Antonio Lignan
e47b309536
Added note in PWM driver and example about PM0
2015-11-30 09:43:35 +01:00
Antonio Lignan
37fcb927be
Added PWM driver for the Zolertia Zoul module and CC2538 platforms
2015-11-25 23:56:29 +01:00
Marco Grella
e47c69c170
Merge remote-tracking branch 'upstream/master' into stm32nucleo-spirit1
2015-11-25 12:36:01 +01:00
Antonio Lignan
830f5fb60d
Fixed warnings in Z1 examples
2015-11-24 22:02:05 +01:00
George Oikonomou
a30154c43e
Fix code style: zoul examples
2015-11-24 21:15:34 +01:00
George Oikonomou
be1bd9a619
Fix code style: Z1 websense example
2015-11-24 21:15:34 +01:00
George Oikonomou
e1f6d39857
Fix code style: Z1 main examples
2015-11-24 21:15:34 +01:00
Antonio Lignan
27fd1a5eb8
Updated RE-Mote revision A support and cleaning up Zolertia platforms
2015-11-24 21:15:33 +01:00
Simon Duquennoy
673d1d103b
JN516x: minor fixes
2015-11-21 10:23:15 +01:00
Marco Grella
41f9ca08e2
Merge with updated master.
2015-11-11 13:42:35 +01:00
Simon Duquennoy
4c52b87ac1
Ported jn516x slip-bridge to new uip_fallback_interface
2015-11-10 09:30:36 +01:00
Simon Duquennoy
dacef46b03
wget.c: replace deprecated gets with safe fgets
2015-11-10 09:09:31 +01:00
Simon Duquennoy
fbd78a7e3b
Merge pull request #1293 from simonduq/pr/fix-warnings
...
Fix a number of compiler warnings and enable -Werror in Travis
2015-11-10 08:49:11 +01:00
Oliver Schmidt
8e9da827c0
Several minor adjustments.
2015-11-03 22:09:24 +01:00
Oliver Schmidt
fb5d0b7ef0
Made 80 column display a cc65 application attribute.
...
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.
I see three types of application:
* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig
* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget
* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser
Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
2015-10-30 12:42:58 +01:00
Marco Grella
e261cda8dc
Compilation flags update: BOARD=ids01a4/5 SENSORBOARD=iks01a1
2015-10-27 12:12:59 +01:00
Rémy Léone
f2440235b5
Fix CSC & XML export to match .gitattributes
2015-10-22 16:05:40 +02:00
Benoît Thébaudeau
bf41de1be5
Merge pull request #1078 from drandreas/cc2538-crypto
...
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-21 11:24:35 +02:00
Simon Duquennoy
2daa3d7377
Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface
...
More flexibility for the fallback interface
2015-10-20 11:33:14 +02:00
Simon Duquennoy
8f954fbab5
res-b1-sep-b2.c: fix type of iterator
2015-10-20 10:11:50 +02:00
Simon Duquennoy
1634acf2c4
jn516x examples: fix compiler warnings to enable -Wall -Werror compilation
2015-10-20 10:11:46 +02:00
Adam Dunkels
9b6377ecdc
Fix compiler warnings
2015-10-20 10:11:37 +02:00
Adam Dunkels
afe3612c0c
Fix compiler warnings
2015-10-20 10:11:36 +02:00
Simon Duquennoy
e3303c7e99
Added missing undef in examples/cc2528dk/sinffer/project-conf.h
2015-10-20 09:37:10 +02:00
Simon Duquennoy
c8ec08732c
Fix broken printf in examples/er-rest-example/resource/res-b1-sep-b2.c
2015-10-20 09:37:09 +02:00
Simon Duquennoy
9c15d1c42f
Merge pull request #1063 from simonduq/configure-na
...
Default NDP configuration
2015-10-18 20:26:55 +02:00
Simon Duquennoy
10bd49a71a
Merge pull request #756 from sieben/dos2unix
...
dos2unix fix
2015-10-18 20:26:07 +02:00
AntiCat
d631270af4
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-18 20:14:17 +02:00
Konrad Krentz
0a6b1cb646
llsec: Added AEAD mode to CCM*
2015-10-14 08:22:44 -07:00
Konrad Krentz
c656a4d1c5
llsec: Fixed style issues in CCM*
2015-10-14 08:22:44 -07:00
Konrad Krentz
2059b6559e
llsec: Let llsec_drivers define their own framer
2015-10-14 08:21:40 -07:00
Marco Grella
4e81c87c3a
Fix to sensor-demo license and Readme file.
2015-10-13 12:21:21 +02:00
Marco Grella
fc65757114
License headers and code style fixes.
2015-10-09 19:40:39 +02:00
Simon Duquennoy
2231cc9b0f
Merge pull request #1266 from drugo72/avr-revival
...
AVR revival: new battery and temperature sensors and er-rest-example for the Raven
2015-09-28 17:52:26 +02:00
Simon Duquennoy
2834b41ed6
Merge pull request #1267 from drugo72/rest
...
REST: new observable, periodic temperature resource
2015-09-28 17:52:05 +02:00
Mariano Alvira
94daacd244
Merge pull request #817 from SmallLars/econotag-ecc
...
Addet ECC functions on elliptic curve secp256r1.
2015-09-28 09:45:11 -05:00
Simon Duquennoy
f9537b6355
Merge pull request #1219 from simonduq/jn516x-port
...
NXP JN516x Platform
2015-09-25 12:09:52 +02:00
Lars Schmertmann
17ff3bb466
Added ECC functions on elliptic curve secp256r1
2015-09-24 14:11:20 +02:00
Simon Duquennoy
0780e1a051
Added NXP JN516x examples
2015-09-23 14:38:41 +02:00
Víctor Ariño
76e293c289
Fixes ret value for output fallback iface in tun-bridge.c
2015-09-22 12:53:04 +02:00
Víctor Ariño
561e70b18e
Updated current fallback_interface(s) to return int.
2015-09-22 12:53:04 +02:00
Cristiano De Alti
6e91cb3a39
Activate battery and temperature resources
...
if they are supported by the platform.
2015-09-21 23:20:45 +02:00
Cristiano De Alti
ba3c167cef
Add a new periodic temperature resource.
...
The temperature sensor is sampled once per second.
If observed, temperature readings are reported on change or every
Max-Age interval (default: 60s).
2015-09-21 23:12:16 +02:00
Cristiano De Alti
5a829d818d
er-rest-example leveraging the new rave sensors.
2015-09-21 22:53:48 +02:00
Lars Schmertmann
46ffc509c1
Added App/Tool/Example for usage of additional flash on econotag/mc1322x
2015-09-14 20:43:12 +02:00
Marco Grella
87970a88a4
Comments and documentation fixes.
2015-09-10 14:28:08 +02:00
Marco Grella
b7459a12c1
Added radio sensor.
2015-09-07 19:59:03 +02:00
Rémy Léone
7a5071dd30
Adding a gitattributes and correcting line-endings
...
https://help.github.com/articles/dealing-with-line-endings/
2015-09-07 15:40:02 +02:00
Marco Grella
17aafb9daa
Align to current master
2015-09-04 17:01:04 +02:00
Nicolas Tsiftes
607303ecdd
Merge pull request #1081 from pablocorbalan/light
...
Remove old unused light drivers
2015-08-28 14:13:00 +02:00
Adam Dunkels
bfb29d2f11
Merge pull request #1116 from cetic/pr-uip-clear-buffer
...
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
Jonas Olsson
67045d4012
Export RSSI to default parent in the CC26xx web demo
...
The current version of the CC26xx web demo publishes over MQTT the default parent's IPv6 address and the last observed RSSI of this link. This is collected by active probing (periodic ping).
This commit brings the probing functionality to the example's main code module. The MQTT client keeps publishing as previously, but we now also export the same information through CoAP resources. Configuration is still possible through the example's web server.
2015-08-23 20:41:12 +01:00
Jonas Olsson
bad7eb2bc8
Add a very sleepy CC26xx/CC13xx demo
...
This demonstraties how to combine CC13xx tick suppression, RPL leaf mode and turning off ContikiMAC duty cycling to build an extremely low-consuming firmware.
2015-08-23 20:41:12 +01:00
Jonas Olsson
72b586cb7d
Modify cc26xx examples to play nicely with the CC13xx addition
2015-08-23 20:41:11 +01:00
Oliver Schmidt
902b21a326
Merge pull request #1188 from oliverschmidt/master
...
Some finishing touch on the CBM retro targets.
2015-08-08 16:33:59 +02:00
Oliver Schmidt
757809196e
Some finishing touch on the CBM retro targets.
2015-08-08 15:41:24 +02:00
Pablo Corbalán
5db5524b7f
Remove unneeded headers in sky-shell-exec
2015-08-04 20:39:09 +01:00
Joe Andrieu
e0f72b9545
Clarified that a newline is needed for the echo
2015-07-26 16:17:34 -07:00
Marco Grella
86f35536a4
Added new stm32nucleo-spirit1 platform
2015-07-24 16:30:10 +02:00
Oliver Schmidt
a0be26d9f1
Merge pull request #1150 from oliverschmidt/master
...
Several retrocomputing config changes.
2015-07-06 09:42:55 +02:00
Simon Duquennoy
3315d3069d
Merge pull request #1108 from phoenix-frozen/generify-ccm-star
...
generalised CCM module into lib
2015-07-01 10:44:41 +02:00
Oliver Schmidt
00f9eebfab
Changed Telnet server configuration for the Apple II.
...
Having the Telnet server reboot on exit (via ctrl-reset) allows to bring back the full MTU.
2015-06-28 22:25:28 +02:00
Oliver Schmidt
a70fbf1bbf
Reconfigured Telnet server.
...
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
2015-06-21 21:07:41 +02:00
Oliver Schmidt
fc9d38caba
Reduced default for number of connections.
...
Save some memory by reducing the the default for number of connections from 10 to 2.
2015-06-21 20:58:51 +02:00
Laurent Deru
1f0fd3f38b
Add uip_ext_len definition in fakeuip.c for ravenusbstick
2015-06-15 15:15:59 +02:00
Laurent Deru
1784338b2e
Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it
2015-06-15 11:10:51 +02:00
Justin King-Lacroix
3ce8f26eea
generalised CCM module into lib
...
introduced convenience functions for LLSEC modules
2015-06-10 18:07:41 +01:00
Benoît Thébaudeau
e8a268cd15
cc2538: aes: Add support for 192- and 256-bit keys
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
Benoît Thébaudeau
801315e819
cc2538: aes: Make it possible to have several keys stored at once
...
Several keys can be kept at the same time in the key store, and several
keys can be loaded at once. Give access to these features.
The ccm-test example is also improved to better demonstrate the use of
the key store.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
b92a5afcc4
cc2538: ccm: Make it possible to use the interrupt
...
Using the AES interrupt allows the user process not to waste time
polling for the completion of the operation. This time can be used by
the user process to do something else, or to let the system enter PM0.
Since the system is now free to perform various operations during a
crypto operation, a protection of the crypto resource is added, and PM1+
is prohibited in order not to stall crypto operations.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau
117dc4e5e3
cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
Antonio Lignan
330e450ba4
Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094 ).
...
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
2015-05-29 22:04:43 +02:00
Antonio Lignan
2cee62eb33
Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware
...
Update to latest CC26xxware and add it as a submodule
2015-05-21 10:01:00 +02:00
Adam Dunkels
730bda2001
Merge pull request #883 from cmorty/pull/global-macros
...
Move MAX, MIN and ABS to contiki-macros
2015-05-18 21:33:00 +02:00
Moritz 'Morty' Strübe
0dab6926b3
Move MAX, MIN and ABS to sys/cc.h
2015-05-18 08:53:17 +02:00
George Oikonomou
5f4154a0e3
Adjust AON BatMon usage
2015-05-17 14:09:51 +01:00
Antonio Lignan
32afadea77
Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm
...
CC26xx Ultra Low Power Operation
2015-05-16 10:27:22 +02:00
Antonio Lignan
402eabecca
Merge pull request #929 from lab11/delete-old-coap
...
Delete old CoAP implementation
2015-05-15 15:49:04 +02:00
George Oikonomou
7e00eeb76a
Achieve lowest consumption with the CC26xx demo:
...
This changes the CC26xx simple demo so that a devices running this firmware will achieve the lowest possible energy consumption without requiring any changes to the example
2015-05-15 09:21:05 +01:00
George Oikonomou
421fbfae25
Change the LPM locks API:
...
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.
This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou
00a6c31158
Improve OPT sensor driver and usage
...
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
Antonio Lignan
b50ae639b3
Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
...
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
Brad Campbell
869768902b
seedeye powerswitch: update coap
...
The powerswitch app was using old an older implementation of er-coap.
This updates it.
2015-05-14 17:20:46 -04:00
Brad Campbell
6eaada0c3f
Delete old CoAP implementation
...
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
2015-05-14 17:20:46 -04:00
Benoît Thébaudeau
d64927397f
Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
...
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
George Oikonomou
e4722bb0ea
Replace SHT21 with HDC1000 in the web demo
2015-05-14 13:20:39 +01:00
George Oikonomou
62f978b993
Replace SHT21 with HDC1000 in the simple demo
2015-05-14 13:20:39 +01:00
George Oikonomou
11a5e0a49a
Merge pull request #1051 from simonduq/fix-warning
...
Fixed a number of compiler warnings
2015-05-13 00:52:40 +01:00
George Oikonomou
49d1782a06
Adjust the MQTT demo to use re-engineered sensors
2015-05-12 23:42:20 +01:00
George Oikonomou
ac459df128
Re-work the CC2538 demo to use the 3 separate ADC sensors
2015-05-12 23:42:20 +01:00
Simon Duquennoy
1ac5d85042
Enable NA in examples that need it
2015-05-10 19:56:38 +02:00
Nicolas Tsiftes
44af0fa66b
Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket
...
New HTTP socket, DNS64, IP64 Cooja tests
2015-05-10 17:14:31 +02:00
Adam Dunkels
bc222ed85c
Code for building an IP64 router
2015-05-10 10:51:11 +02:00
Adam Dunkels
33372945a3
HTTP socket code with support for GET and POST
2015-05-10 10:51:11 +02:00
George Oikonomou
447be526ae
Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
...
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
George Oikonomou
6e3197b0bf
Merge pull request #1008 from g-oikonomou/cc26xx/contrib/web-demo-httpd
...
Improve HTTPD in the CC26xx web demo
2015-05-09 22:46:26 +01:00
George Oikonomou
bd5e35c968
Merge pull request #1052 from simonduq/packetbuf-cleanup
...
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
George Oikonomou
33526be5ab
Merge pull request #985 from g-oikonomou/cc26xx-minor-updates
...
Minor Updates to the CC26xx Port
2015-05-09 22:29:30 +01:00
George Oikonomou
38b3b8b74a
Merge pull request #981 from g-oikonomou/cc2538-sniffer-fix
...
Turn on the CC2538 RF explicitly in the sniffer example
2015-05-09 21:56:23 +01:00
Simon Duquennoy
4a93f5148d
Fixed a number of compiler warnings
2015-05-08 09:07:20 +02:00
Simon Duquennoy
290fc829ea
Consistently use PACKETBUF_ATTR_MAC_SEQNO for MAC sequence number, both input and output. Disable PACKETBUF_ATTR_PACKET_ID in the non-Rime case.
2015-05-06 16:34:44 +02:00
Simon Duquennoy
bb76bb8beb
Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled.
2015-05-06 16:34:26 +02:00
George Oikonomou
f83c4e7286
Improve code style
2015-05-03 22:36:03 +01:00
Nicolas Tsiftes
f7ca4b41a9
Merge pull request #1001 from adamdunkels/pr/queuebuf-no-ref
...
Cleanup: remove the obsolete reference packetbuf
2015-05-03 16:35:17 +02:00
George Oikonomou
a72d90e283
Control TCP MSS in the project's conf
2015-05-03 13:31:03 +01:00
Adam Dunkels
7acf747c1a
Removed packetbuf references. This was a feature that is not used anymore and only made the code more complex.
2015-04-01 21:33:02 +02:00
Antonio Lignan
b9334a3b0e
Added Reed Sensor driver and example
2015-03-30 10:30:09 +02:00
George Oikonomou
7730215f99
Point all form action attributes to the current html page
2015-03-27 20:18:58 +00:00
George Oikonomou
7637164ae7
Parse filename for POST requests
...
so we can return it in the "Location:" header subsequently
2015-03-27 20:18:58 +00:00
George Oikonomou
54c1cd05e8
Simplify the page name to script mapping
2015-03-27 20:18:58 +00:00
George Oikonomou
90a3cd8e14
Change the way we handle HTTP response headers
2015-03-27 20:18:58 +00:00
George Oikonomou
733378679f
Prettify httpd top matter in the web demo
2015-03-27 20:11:44 +00:00
Antonio Lignan
1af29a5beb
Added SHT25 sensor
2015-03-10 15:33:58 +01:00
George Oikonomou
1fc06b6581
Turn on the CC2538 RF explicitly
2015-02-28 15:01:32 +00:00
Nicolas Tsiftes
bfd2a90e08
Merge pull request #933 from alessandrelli/coap-observe-client
...
Erbium: client-side support for CoAP Observe
2015-02-26 10:06:58 +01:00
Jonas Olsson
0f567e499f
Add CC26xx examples
2015-02-25 13:15:35 +01:00
Daniele Alessandrelli
b6e716233a
er-coap-example: add example for client-side CoAP observe
2015-02-24 22:48:12 +01:00
Jonas Olsson
2bb7fcc0cb
Fixed doxygen formatting
2015-02-17 16:11:45 +01:00
Jonas Olsson
4fb2bd410f
Add title to doxygen group
2015-02-17 16:07:37 +01:00
Jonas Olsson
6112ec54d3
Add MQTT demo for the cc2538dk platform
2015-02-17 15:58:50 +01:00
George Oikonomou
72914369e8
Re-structure CC2538 doxygen module hierarchy
2015-02-16 10:17:58 +01:00
Michael Richardson
5699127c9a
additional edits to further clarify interface between native-border-router and slip-radio
2015-02-07 10:51:41 -05:00
Michael Richardson
a0ac6bceb6
added some documentation of native-border-router and slip-radio relationship
2015-02-03 11:05:13 -05:00
Simon Duquennoy
c2ca3e9fdb
Cleanup UIP_CONF_IPV6_RPL configuration
2014-12-02 12:38:55 +01:00
Simon Duquennoy
74f6ae3751
slip-radio: remove unneeded definition of NETSTACK_CONF_WITH_RPL (now set from makefile with CONTIKI_WITH_RPL)
2014-12-01 21:04:25 +01:00
Simon Duquennoy
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1
Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.
2014-12-01 20:13:09 +01:00
Nicolas Tsiftes
bb645b6287
Merge pull request #877 from gebart/for-upstream/rpl-border-router-webserver-tcp
...
examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS
2014-11-28 19:00:46 +01:00
Nicolas Tsiftes
4a41f147d3
Merge pull request #879 from alignan/fix_rssi_app
...
Fixed rssi scanner application and moved into single example
2014-11-28 19:00:23 +01:00
Antonio Lignan
4f744d858a
Fixed rssi scanner application and moved into single example
2014-11-28 13:07:26 +01:00
Joakim Gebart
1e03cdd553
examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS
...
The example used to rely on the default value being set to 1 which
caused build failures on platforms which have a default UIP_CONF_TCP=0
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-11-26 19:05:32 +01:00
Joakim Gebart
64a4755354
examples/webserver-ipv6: Add UIP_CONF_TCP=1 to DEFINES.
...
TCP is mandatory for this HTTP server.
Fixes builds for platforms which have TCP turned off by default (mulle)
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-11-26 19:03:51 +01:00
Nicolas Tsiftes
6ca95ebc0c
Merge pull request #811 from kkrentz/llsec-renaming
...
llsec renaming
2014-11-07 22:20:15 +01:00
Antonio Lignan
ef6c351d0c
Add function to change I2C baudrate and push relevant configuration values to platform config
2014-10-20 14:23:36 +02:00
Nicolas Tsiftes
27cde1ff81
Merge pull request #824 from alignan/fix_warnings
...
Warning fixes
2014-10-20 11:16:36 +02:00
Antonio Lignan
c836fbfbd9
Fixes warnings, bad code and code style
2014-10-20 10:28:00 +02:00
kkrentz
0579e304e4
llsec: Renamed ccm to ccm_star & Renamed llsec regression test
2014-10-16 09:21:56 -07:00
Adam Dunkels
d891d11324
Merge pull request #557 from kkrentz/llsec-integration
...
Integration of Link Layer Security
2014-10-08 15:45:46 +02:00
Joakim Gebart
d4179a0a0c
examples/rpl-border-router: Fix two minor warnings.
...
- Remove unused variable i in generate_routes.
- Add cast to unsigned long for printf(..%lu..) in generate_routes.
Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-10-04 18:05:38 +02:00
Nicolas Tsiftes
7738cdd15e
Avoid compilation warnings in Antelope.
2014-09-05 18:21:47 +02:00
Pablo Corbalan
fab4f4144f
Add SHT11 CoAP Resource and Activate Sensors for several CoAP Resources.
2014-08-25 11:36:31 +01:00
kkrentz
2cf7d98cad
ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface
...
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
2014-08-05 05:07:06 -07:00
kkrentz
2687c345cf
llsec: CCM* encryption tests
2014-08-05 05:07:05 -07:00
kkrentz
5e6cf8da36
llsec: CCM* verification tests
2014-08-05 05:07:05 -07:00
kkrentz
c396a85364
llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security
2014-08-04 01:09:57 -07:00
Fredrik Österlind
ed7e09ed5b
Merge pull request #755 from sieben/SkyByteRadio
...
SkyByteRadio was replaced by Msp802154Radio
2014-07-24 09:15:45 +02:00
Rémy Léone
911f3aa07c
SkyByteRadio was replaced by Msp802154Radio
2014-07-23 15:42:59 +02:00
Benjamin Cabé
afcd5e5387
Add missing semi-colon
2014-07-16 21:37:47 +02:00
Antonio Lignan
5467674fcc
Merges Z1SP into Z1 platform
2014-07-04 10:41:05 +02:00
Nicolas Tsiftes
24e260910c
Merge pull request #718 from g-oikonomou/rpl-dodagid-compliance
...
Make DODAG ID selection RFC 6550-compliant
2014-06-13 15:33:56 +02:00
Adam Dunkels
14aedabffd
Updated to match the new leds_toggle() API
2014-06-12 20:02:33 +02:00
George Oikonomou
a9e7bea675
Make DODAG ID selection RFC 6550-compliant
...
Some calls to `rpl_set_root` select a hardcoded DODAG ID
(0x1111, 0x1100, 0, 0, 0, 0, 0, 0x0011)
This is against what RFC 6550 says. We change these calls
to select a DODAG ID corresponding to a routable v6 address
corresponding to the root
2014-06-12 00:09:53 +01:00
Adam Dunkels
eceaf0c59b
Merge pull request #631 from nfi/framer-len
...
Added function to framer that returns the estimated header length
2014-06-11 23:17:47 +02:00
Adam Dunkels
64f65b4e45
Merge pull request #617 from nfi/extended-radio-api
...
Extended radio API with support for setting channel, pan id, addressing modes, etc
2014-06-03 21:32:53 +02:00
Matthias Kovatsch
2683e13da5
Updated README and Makefile.
2014-05-15 20:29:05 +02:00
Matthias Kovatsch
a26533f501
Updated Cooja simulations.
2014-05-15 20:29:05 +02:00
Lars Schmertmann
386d708b56
Added function for easy block1 usage.
...
Fixed blocksize calculation when REST_MAX_CHUNK_SIZE != 2^x.
Added example for block1 + separate + block2.
2014-05-15 20:29:04 +02:00
Lars Schmertmann
bb737f85ae
Used Uncrustify and fixed Travis build errors.
2014-05-15 20:29:04 +02:00
Matthias Kovatsch
3dd5bd7a37
Renamed erbium to er-coap to avoid confusion and have a meaningful directory name.
2014-05-15 20:29:03 +02:00
Matthias Kovatsch
7d79b69ada
Updated to CoAP Proposed Standard and removed draft versions.
2014-05-15 20:29:03 +02:00
George Oikonomou
49b6ad2af5
Use the extended RF API for the cc2530 border router example
2014-04-23 12:16:50 +01:00
George Oikonomou
df81cbaed9
Simplify the extended RF API example
2014-04-22 19:42:47 +01:00
Benoît Thébaudeau
d93d129da6
cc2538: uart: Make it possible to use several UARTs simultaneously
...
This avoids the limitation of having a single UART available at runtime, without
duplicating code.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2014-04-17 18:53:44 +02:00
Niclas Finne
ceb868d934
Modified project setup for er-rest-example and rest-example to use
...
nullrdc and nullmac to reduce the code size. This allows the examples
to compile on Tmote Sky again.
2014-04-15 22:59:20 +02:00
Niclas Finne
0327623ae1
Minor update to improve output in extended RF API example. On 16 bit
...
platforms, PAN id and short address might be negative when used as
16 bit signed integers.
2014-04-15 22:50:11 +02:00
George Oikonomou
22800de94e
Add extended RF API example
2014-04-14 15:25:32 +02:00
George Oikonomou
33abe26ec8
Merge pull request #411 from ADVANSEE/cc2538-adc
...
cc2538: Add adc driver and example
2014-04-13 03:05:12 +01:00
Niclas Finne
68730566a3
Added method to framer that returns the header length if the framer
...
would create a header with the current packet information.
This allows sicslowpan to calculate the max payload size without
consuming a sequence number or clearing/restoring the packet buffer.
2014-04-11 17:03:23 +02:00
Nicolas Tsiftes
3829860c3c
Merge pull request #620 from adamdunkels/push/socket-api
...
New TCP and UDP socket APIs
2014-04-09 22:12:59 +02:00
Adam Dunkels
367eed96f4
Add a compile test for the tcp-socket example
2014-04-09 22:01:18 +02:00
Adam Dunkels
ca5652d981
TCP socket server example
2014-04-09 21:57:05 +02:00
Fredrik Österlind
b613d05685
Merge pull request #575 from lecneri/patch-1
...
typo in event resource handler comment
2014-03-27 16:32:46 +01:00
Adam Dunkels
d397e97e74
Minor code style fixes
2014-03-05 20:31:18 +00:00
George Oikonomou
0bbb574689
IPv6 Multicast Example
2014-03-05 20:31:17 +00:00
Luiz Eduardo
3062e9175f
typo in event resource handler comment
...
at line 531 says PERIODIC_RESOURCE, shouldn't it be EVENT_RESOURCE, since it's a EVENT_RESOURCE demo?
2014-02-24 23:34:16 -02:00
George Oikonomou
7fb242f883
Merge pull request #493 from g-oikonomou/cc2538-demo-example-counter
...
Don't increment the counter when a button is pressed
2014-02-02 05:41:33 -08:00
Adam Dunkels
45265249fc
Changed the name of the rimeaddr module to linkaddr
2014-01-29 20:12:24 +01:00
Adam Dunkels
8eace27f9b
Moved net/rime.h to net/rime/rime.h
2014-01-26 23:20:45 +01:00
Adam Dunkels
89e07a97a2
Need to explicitly include the sicslowmac module and the fakeuip.c file.
2014-01-26 23:20:42 +01:00
Adam Dunkels
0fe08205e1
Moved the rimeaddr.[ch] code from the core/net/rime module to the core/net module, as it is used not only by rime code
2014-01-26 23:20:36 +01:00
Adam Dunkels
4cfe6c4a5e
Moved the sht11 driver to its own module
2014-01-26 23:20:30 +01:00
Adam Dunkels
0b805e4763
Moved the cc2420 driver into a separate dev/cc2420 module
2014-01-26 23:20:27 +01:00
Adam Dunkels
5f3fe7f7c7
Updated include paths for the moved files under net/
2014-01-26 23:20:23 +01:00
Oliver Schmidt
64ce68f004
Added cmdline args support to wget example.
2014-01-24 12:44:23 +01:00
Oliver Schmidt
510678bed0
Added mouse support for the Atari.
2014-01-20 22:51:40 +01:00
Oliver Schmidt
f6940903a0
Now that all supported targets echo the Return key on gets() there's no more need to print \n's.
2013-12-26 16:12:39 +01:00
Benoît Thébaudeau
dbba311270
cc2538: Add adc driver and example
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-12-06 22:07:45 +01:00
George Oikonomou
394aeb722d
Don't increment the counter when a button is pressed
2013-12-05 18:33:09 +00:00
Mariano Alvira
54719b75b8
Merge pull request #140 from cetic/slip-radio-platforms
...
Extend slip-radio example for Econotag and Nooliberry
2013-12-02 09:23:10 -08:00
Mariano Alvira
590b3f48a9
Merge pull request #477 from MariaLauraStefanizzi/eeprom
...
i2c and eeprom drivers for mbxxx boards
2013-12-02 09:20:14 -08:00
Gianfranco Costamagna
19a46266a5
Revert "Fixing sleep on stm32w108 cpu"
...
This reverts commit eac73ff68ce98e862def4bd671db03f7b9a3b438.
2013-12-02 11:37:53 +01:00
Adam Dunkels
88915dca58
Enabled shell_rime_send_cmd_init() so that this example can be used in the shell/03-sky-shell-command regression test
2013-11-28 14:09:17 +01:00
Adam Dunkels
0fd503af42
Removed the experimental checkpointing code
2013-11-28 14:09:17 +01:00
Maria Laura Stefanizzi
8de0380efe
Eeprom-test example modified
...
This patch improves the eeprom-test example adding more
tests on the eeprom read/write procedures.
2013-11-27 15:40:07 +01:00
Adam Dunkels
0d04db2b03
Merge pull request #428 from g-oikonomou/config-sanity
...
Remove unnecessary stuff from various Makefiles (Config Sanity, Pt 1)
2013-11-26 15:05:08 -08:00
Nicolas Tsiftes
db4cada4e7
Merge pull request #462 from adamdunkels/push/no-reserved-double-inclusion-defines
...
Remove all leading double underscore inclusion #defines
2013-11-26 14:26:37 -08:00
Adam Dunkels
bb2dcaa057
A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix
2013-11-24 20:20:11 +01:00
Adam Dunkels
9f2e233770
The RPL_PARENT_COUNT() macro doesn't exist anymore - use the uip_ds6_nbr_num() function instead
2013-11-24 15:17:53 +01:00
Fredrik Osterlind
b5c94910ac
Renamed Java packages to match our contiki-os.org domain. Note that this commit does not affect external dependencies
...
like /tools/mspsim.
This is a very simple modification that affects a very large number of files in Contiki: Cooja,
/platform/cooja, Collect-view, Coffe-manager, and Cooja simulation files (.csc).
I've gone through Contiki to update all references I could find. Nevertheless, this commit will likely
break external dependencies, like saved Cooja simulation files.
2013-11-20 16:43:27 +01:00
George Oikonomou
58ef2342c2
Stop setting WITH_UIP6=1 in example Makefiles
...
It achieves exactly nothing other than generate confusion
2013-11-20 14:52:32 +00:00
Nicolas Tsiftes
263e212427
Merge pull request #431 from adamdunkels/push/ipv6-const
...
Make IP addresses const
2013-11-20 04:26:05 -08:00
Mariano Alvira
4899e34882
Merge pull request #440 from ismb-pert/fix-sleep
...
Fixing sleep on stm32w108 cpu
2013-11-19 11:42:42 -08:00
Nicolas Tsiftes
d183b87f4b
Merge pull request #434 from adamdunkels/push/cleanup-sys
...
Remove old unused code from the core/sys/ directory
2013-11-19 09:53:57 -08:00
Gianfranco Costamagna
542d8490ef
Fixing sleep on stm32w108 cpu
2013-11-19 18:39:58 +01:00
Adam Dunkels
523c03e4b8
Removed old unused profile.h code
2013-11-19 08:31:52 +01:00
Adam Dunkels
30c0c5eaf6
Removed old unused timetable code
2013-11-19 08:29:23 +01:00
Adam Dunkels
60048db837
Removed old esb examples
2013-11-18 23:51:15 +01:00
Adam Dunkels
23aaf0778b
Removed old, unused and now surprisingly named example
2013-11-18 23:47:08 +01:00
Adam Dunkels
6246929016
Removed old unused jcreate platform examples
2013-11-18 23:45:35 +01:00
Adam Dunkels
ea0248e3b0
Removed old, unused and empty example
2013-11-18 23:44:17 +01:00
Adam Dunkels
f9cb6ec2fa
Added the const keyword to IP address arguments that are not (and should not be) changed by the callee
2013-11-18 00:55:57 +01:00
Giovanni evilaliv3 Pellerano
7fa2ce1329
fixed a C error "della madonna"
...
http://it.wikipedia.org/wiki/Jerry_Cal%C3%A0
2013-10-23 15:21:07 +02:00
Oliver Schmidt
d79ac1558a
Added missing 'atarixl' Makefile defines.
2013-10-04 00:03:40 +02:00
Oliver Schmidt
57d9c43a33
Removed support for 'atari' now that 'atarixl' is part of the cc65 master.
2013-10-03 22:55:32 +02:00
Simon Duquennoy
248301a041
Fix naming issues and includes in uip-ds6-nbr.h
2013-08-19 17:48:30 +02:00
Simon Duquennoy
5dc05e7913
Port apps, examples, platforms and tools so they use the new neighbor and route API.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50
Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead.
2013-08-19 17:48:30 +02:00
Moritz 'Morty' Strübe
e292d31640
Add channel numbers and RSSI-Values
2013-08-14 16:44:01 +02:00
Moritz 'Morty' Strübe
244b06f25d
Fix calculation of the maximum RSSI value
2013-08-14 16:44:01 +02:00
Moritz 'Morty' Strübe
f407dea8ff
Update documentation in ViewRSSI.java
2013-08-14 16:44:01 +02:00
Moritz 'Morty' Strübe
fae6c530de
Fix indention of ViewRSSI.java
2013-08-14 16:44:00 +02:00
George Oikonomou
d7c796f65f
Decrease Sensinode example code size
2013-08-09 16:40:28 +01:00
George Oikonomou
cdba557e5e
Don't build the Sensinode UDP server as RPL root
...
The Sensinode UDP-IPv6 example used to build the
UDP server to act as RPL root by default. This now
changes, the server is a simple router. Support to
build the server as RPL root is still there, it's
just the default that changes
2013-08-09 15:53:57 +01:00
George Oikonomou
f30d92b101
Change the way we switch between cc2530 models
...
The switch is now performed through a configuration define,
which has also been renamed to better match Contiki's naming
conventions
2013-08-09 15:53:23 +01:00
George Oikonomou
ecf8ca55ef
Move SLIP interface define to project-conf
2013-08-09 15:50:47 +01:00
Mariano Alvira
5d19de3dbf
Merge pull request #266 from ismb-pert/fix-mbxxx
...
mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.
2013-07-26 07:38:11 -07:00
stefano pascali
fcb09d5d30
Fixed mbxxx platform
2013-07-11 17:56:17 +02:00
Jelmer Tiete
4e0d5cf65e
Corrected copyright holder.
2013-06-24 16:13:35 +02:00
Jelmer Tiete
9810bfbcfd
contiki code style changes and copyright update + added source to ARCH instead of SOURCEFILES in platform Makefile
2013-06-24 15:17:52 +02:00
Jelmer Tiete
ed8be502db
tlc59116 for zolertia, added 0 values at init and code clean-up
2013-06-24 15:17:52 +02:00
Jelmer Tiete
cc2567b988
working tlc59116 implementation for z1
2013-06-24 15:17:52 +02:00
Jelmer Tiete
8b61492152
first implementation for tlc59116 on z1
2013-06-24 15:17:52 +02:00
Nicolas Tsiftes
f606322ae0
Merge pull request #276 from mkovatsc/er-coap-13
...
Erbium (Er) fixes and updates
2013-06-24 01:44:23 -07:00
Matthias Kovatsch
9b56ffefa5
Fixed broken/unclear Ipv6 configuration with CFLAG.
2013-06-19 16:03:49 +02:00
Matthias Kovatsch
bad066abad
Fixed RPL configuration according to core changes.
2013-06-19 15:27:22 +02:00
Matthias Kovatsch
c61dd6135e
Updated Erbium (Er) examples and removed unsupported static routing module.
2013-06-19 15:27:21 +02:00
Peter A. Bigot
eecb2c6183
examples/trickle-library: correct probability expression
...
Documented intent is to update with probability 1/NEW_TOKEN_PROB where
NEW_TOKEN_PROB is 0x80. The current implementation updates with probability
1/2. Update NEW_TOKEN_PROB and the expression to keep existing behavior
while correcting the calculation.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
2013-06-17 13:03:37 -05:00
Oliver Schmidt
d636d7110f
Added platform 'Atari XL'.
...
Don't be afraid, I'm not trying to have more retro platforms than "real" platforms ;-)
The platform 'atarixl' will replace the platform 'atari'. However I need both for some
transition period.
2013-06-01 22:49:00 +02:00
Karl Palsson
c3ce5ab63a
[examples] Remove broken example with no clear purpose
...
This example didn't compile, had no actual code changes in the last ~6
years, had no documentation explaining it's purpose, and insufficient
code comments to provide a useful example. Removing it in favour of
fewer, but clearer, examples, that are easier to keep maintained.
2013-05-25 11:44:22 +00:00
Nicolas Tsiftes
4b80ad9c89
Merge pull request #239 from darconeous/pull-requests/avr-ravenusb-rpl
...
avr-ravenusb/cdc_task: Fix compile issues.
2013-05-20 04:42:03 -07:00
Nicolas Tsiftes
9b3c704be5
Merge pull request #210 from joakimeriksson/master
...
Fixed native border router to compile and have less packet loss (due to slip-dev bug).
2013-05-20 04:39:36 -07:00
Adam Dunkels
aaac20a950
Merge pull request #225 from tecip-nes/pic32_minor_reorganization
...
Pic32 minor reorganization
2013-05-19 14:22:14 -07:00
George Oikonomou
5ecd2a1e95
Add an example demonstrating trickle timers
2013-05-19 21:51:10 +01:00
Robert Quattlebaum
3e0666265d
avr-ravenusb/cdc_task: Fix compile issues.
...
A lot more changes are in the pipeline, but compiling is a good start.
2013-05-19 11:31:01 -07:00
Mariano Alvira
5df586e09d
Merge pull request #184 from g-oikonomou/bug-fixes/rimestats
...
Rimestats Fix (#183 )
2013-05-19 07:45:22 -07:00
Mariano Alvira
e24a50c1b2
Remove everything that depended on the now gone twitter APP.
2013-05-18 18:22:37 -04:00
Robert Quattlebaum
535e90343c
Merge pull request #144 from darconeous/pull-requests/settings-for-all-targets
...
core/lib/settings: Generalized settings manager to work on any platform
2013-05-18 12:03:09 -07:00
Robert Quattlebaum
b8c0f2de6c
cpu/native: Add file-backed simulated EEPROM to native cpu.
...
This patch removes a defunct EEPROM implementation from the native
platform and provides a new EEPROM implementation for the native cpu.
The previous implementation appears to be vestigal.
This is useful for testing code which uses the EEPROM without running
the code on the actual hardware.
By default the code will create a new temporary file as the EEPROM
backing, reinitializing each time. If you would like to preserve the
EEPROM contents or specify a specific EEPROM file to use, you can set the
`CONTIKI_EEPROM` environment variable to the name of the EEPROM file you
wish to use instead. If it already exists, its contents will be used.
If it does not already exist, it will be created and initialized by
filling it with `0xFF`---just like a real EEPROM.
A new example is also included, which was used to verify the correctness
of the implementation. It can easily be used to verify the EEPROM
implementations of other targets.
2013-05-18 10:29:41 -07:00
Giovanni evilaliv3 Pellerano
49d861979b
remote power switch example updated to use coap version 13
2013-05-17 14:45:13 +02:00
Giovanni evilaliv3 Pellerano
db729eddd2
added remote power switch example for SeedEye board
2013-05-17 14:33:58 +02:00
Adam Dunkels
59a8df14a8
Merge pull request #189 from sieben/markdown
...
Update to markdown
2013-05-16 00:24:25 -07:00
Joakim Eriksson
a096ace73e
fixed bug causing lots of packet loss
2013-05-04 13:13:08 -07:00
Joakim Eriksson
26d3359683
make native border router use ipv6 stack and not rime
2013-05-04 13:12:09 -07:00
George Oikonomou
40f49948e6
New Platform: TI CC2538 Development Kit
...
This commit adds cpu, platform and example files,
providing support for running Contiki on TI's cc2538 DK
2013-04-06 21:07:31 +01:00
Oliver Schmidt
d5d8de7372
Merge pull request #181 from mmuman/ctk-ncurses-try4
...
TODOs:
- Check FreeBSD
- Adjust Makefile.target
2013-03-31 14:36:30 -07:00
François Revol
a43601b2fc
ctk-curses: WITH_GUI also on ftp example for native platform
2013-03-30 23:45:53 +01:00
Rémy Léone
e6bd4f1dde
Rename to md
2013-03-26 23:15:37 +01:00
Rémy Léone
7b40a568a6
Update to markdown
...
- Spellchecking
- Update plain text to github markdown
2013-03-26 16:55:19 +01:00
George Oikonomou
db078cf7e8
Replace reads of rimestats with RIMESTATS_GET(x)
2013-03-20 21:14:35 +00:00
Robert Quattlebaum
28a1e40ebd
core/lib/settings: Generalized Settings Manager to work on any platform
...
This commit moves the Settings Manager from the AVR codebase
into the Contiki core library. Any platform that implements
the Contiki EEPROM API can now use the Settings Manager's
key-value store for storing their persistent configuration info.
The Settings Manager is a EEPROM-based key-value store. Keys
are 16-bit integers and values may be up to 16,383 bytes long.
It is intended to be used to store configuration-related information,
like network settings, radio channels, etc.
* Robust data format which requires no initialization.
* Supports multiple values with the same key.
* Data can be appended without erasing EEPROM.
* Max size of settings data can be easily increased in the future,
as long as it doesn't overlap with application data.
The format was inspired by the [OLPC manufacturing data format][].
Since the beginning of EEPROM often contains application-specific
information, the best place to store settings is at the end of EEPROM
(the "top"). Because we are starting at the end of EEPROM, it makes
sense to grow the list of key-value pairs downward, toward the start of
EEPROM.
Each key-value pair is stored in memory in the following format:
Order | Size | Name | Description
--------:|---------:|--------------|-------------------------------
0 | 2 | `key` | 16-bit key
-2 | 1 | `size_check` | One's-complement of next byte
-3 | 1 or 2 | `size` | The size of `value`, in bytes
-4 or -5 | variable | `value` | Value associated with `key`
The end of the key-value pairs is denoted by the first invalid entry.
An invalid entry has any of the following attributes:
* The `size_check` byte doesn't match the one's compliment of the
`size` byte (or `size_low` byte).
* The key has a value of 0x0000.
[OLPC manufacturing data format]: http://wiki.laptop.org/go/Manufacturing_data
2013-03-20 11:57:13 -07:00
François Revol
25e3f828aa
Ncurses-based CTK backend for the native platform.
2013-03-20 01:35:01 +01:00
Adam Dunkels
277a348f60
Changed the name of the IPv6 number of route entries configuration from UIP_CONF_DS6_ROUTE_NBU to UIP_CONF_MAX_ROUTES.
2013-03-18 11:12:44 +01:00
Robert Quattlebaum
da81360731
core/net/resolv: Misc. updates and cleanups.
2013-03-14 19:14:32 -07:00
Adam Dunkels
39e5a8c6dc
Merge pull request #80 from darconeous/mdns-resolv
...
Adds IPv6 and MDNS domain name resolution.
2013-03-10 12:58:39 -07:00
Adam Dunkels
262c9db1c4
Merge pull request #127 from mkovatsc/master
...
Erbium CoAP draft 13
2013-03-10 12:56:06 -07:00
Robert Quattlebaum
f145c17039
core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor.
...
This patch updates the DNS resolver to support IPv6 and introduces an
improved API for looking up DNS entries. This patch also adds optional
support for mDNS lookups and responses to the DNS resolver.
Here is a quick summary of the changes:
* Added support for IPv6 lookups.
* DNS queries now honor record expiration.
* Added support for mDNS, compatible with "Bonjour".
* Implemented a new lookup api, `resolv_lookup2()`, which provides
more information about the state of the record(error, expired,
looking-up, etc.).
About mDNS/Bonjour Support
--------------------------
This patch adds basic support for mDNS/Bonjour, which allows you to
refer to the name of a device instead of its IP address. This is
incredibly convenient for IPv6 addresses because they tend to be very
long and difficult to remember. It is especially important for
link-local IPv6 addresses, since not all programs support the '%'
notation for indicating a network interface (required on systems with
more than one network interface to disambiguate).
In other words, instead of typing in this:
* `http://[fe80::58dc:d7ed:a644:628f%en1]/ `
You can type this instead:
* `http://contiki.local/ `
Huge improvement, no?
The convenience extends beyond that: this mechanism can be used for
nodes to talk to each other based on their human-readable names instead
of their IPv6 addresses. So instead of a switch on
`aaaa::58dc:d7ed:a644:628f` triggering an actuator on
`aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the
actuator on `living-room-lights.local`.
What you need to do to be able to look up `.local` names on your
workstation depends on a few factors:
* Your machine needs to be able to send and receive multicast packets
to and from the LoWPAN. You can do this easily with the Jackdaw
firmware on an RZUSBStick. If you have a border router, you will need
it to bridge the mDNS multicast packets across the border.
* If you are using a Mac, you win. All Apple devices support mDNS
lookups.
* If you are using Windows, you can install Apple's Bonjour for Windows
package. (This may be already installed on your machine if you have
installed iTunes) After you install this you can easily do `.local`
lookups.
* If you are using a Unix machine, you can install Avahi.
The default hostname is set to `contiki.local.`. You can change the
hostname programmatically by calling `resolv_set_hostname()`. You can
change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`.
You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to
`0`.
---------------------------------
core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()`
Note that this patch should fix several `resolv_lookup()` bugs
that already existed. There were many cases where `resolv_lookup()`
was being called and the IP address ignored, but later code
assumed that the IP address had been fetched... ANYWAY, those
should be fixed now.
---------------------------------
examples/udp-ipv6: Updated client to use MDNS to lookup the server.
Also updated the Cooja regression test simulation.
2013-03-10 11:40:08 -07:00
Robert Quattlebaum
1d113f52ad
core/net/uip: Rename `uip_ethaddr` to `uip_lladdr`.
...
There isn't really a good reason I can think of for these
to be different between IPv4 and IPv6.
2013-03-10 11:39:11 -07:00
Adam Dunkels
d2461c9e9a
Merge pull request #99 from heipei/slip-radio
...
Load Makefile.target for slip-radio
2013-03-09 05:55:17 -08:00
Matthias Kovatsch
23e56e57b0
Merge branch 'master' of https://github.com/contiki-os/contiki
2013-03-08 20:21:54 +01:00
Oliver Schmidt
49ca10d540
Removed PFS code from C128 WGET.
...
On the C128 the custom PFS code doesn't add functionality (as it does with IDE64 support on the C64) but is "only" smaller than the POSIX file i/o code in the C library. But the stdio code in the C library (used in WGET for screen i/o) relies on the POSIX file i/o code anyway so there no point in additionally adding the PFS code to the WGET program.
2013-03-06 14:50:51 +01:00
Sébastien Dawans
de3cd3811d
Restore CC2420 as default in slip-radio
2013-02-20 18:26:52 +01:00
Laurent Deru
3486c69981
SLIP-radio support for the Econotag
2013-02-19 21:52:59 +01:00
Sébastien Dawans
e05ab21557
SLIP-radio support for the Nooliberry (RF230 radio)
2013-02-19 21:52:54 +01:00
Oliver Schmidt
9040f83fd4
Reduced program size.
...
On the C128 the custom PFS code doesn't add functionality (as it does with IDE64 support on the C64) but is "only" smaller than the POSIX file i/o code in the C library. But the POSIX directory access code in the C library relies on the POSIX file i/o code anyway so there no point in additionally adding the PFS code to the FTP program.
2013-02-14 15:57:20 +01:00
Oliver Schmidt
107b79c019
The recent cc65 snapshot yields somewhat small programs so we can move back to the MTU size used before.
2013-02-14 15:45:33 +01:00
Matthias Kovatsch
82884ab63f
Fixed legacy CoAP versions.
2013-02-13 19:22:21 +01:00
Matthias Kovatsch
a522357d20
Added Erbium coap-12 and coap-13.
2013-02-13 17:46:35 +01:00
Oliver Schmidt
ea4fac679f
Allow user to read the result of wget.
...
Several retro targets clear the screen after program termination so allow user to read the result.
2013-02-11 00:24:51 +01:00
Oliver Schmidt
945b334457
Minor uIP code increase from Contiki 2.5 to Contiki 2.6 make a buffer reduction necessary.
2013-02-03 23:41:20 +01:00
Oliver Schmidt
81bc336a93
Updated Contiki URL in sample web page.
2013-02-03 10:57:48 +01:00
Oliver Schmidt
7360444c94
Have the wget process allow the resolver process to initialize properly.
2013-02-01 00:10:03 +01:00
Johannes Gilger
3877f361e4
Load Makefile.target for slip-radio
...
This loads Makefile.target into Makefile so we can check for TARGET==sky
when building this. Compilation for sky fails without it.
Signed-off-by: Johannes Gilger <heipei@hackvalue.de>
2013-01-30 15:34:06 +01:00
Adam Dunkels
47c2b13db5
Merge pull request #78 from g-oikonomou/example-putchars
...
We can now turn off example-provided putchars
2013-01-09 22:41:22 -08:00
George Oikonomou
a35580d068
cc2530 udp server example is no longer RPL root by default
2013-01-09 22:46:20 +00:00
George Oikonomou
de251aeb85
We can now turn off example-provided putchars
2013-01-09 22:23:22 +00:00
George Oikonomou
64a95dcb59
Code style fixes: sensinode examples
2012-12-16 19:28:56 +00:00
George Oikonomou
594ba9a0ed
Code style fixes: cc2530dk examples
2012-12-16 19:28:56 +00:00
George Oikonomou
e38b419e84
Deleted obsolete sensinode examples
2012-12-16 19:28:41 +00:00
Adam Dunkels
99f541e8fd
Updated to the latest uip-ds6-route API
2012-11-27 23:04:34 +01:00
Adam Dunkels
5406dd8b18
Updated to use the new uip-ds6-route API
2012-11-27 23:04:34 +01:00
Adam Dunkels
ec8c7e9be0
Cleanup of the node-id.h files. The node-id.h file contains
...
declarations of functions for setting and getting a node ID number, a
functionality that exists on many platforms. Since this functionality
was not considered part of the Contiki core, each platform defined its
own node-id.h file. This commit attempts to clean this up by
collecting the node-id.h into a core/sys/node-id.h file that replaces
the old node-id.h files from the platform directories.
2012-11-20 19:59:46 +01:00
Mariano Alvira
e4a383d61d
don't use static routing with econotag platform
2012-11-20 13:22:28 -05:00
George Oikonomou
5762179159
cc2530dk: Sniffer example changes:
...
- Building for the cc2531 USB dongle by default
- We turn on USB-serial buffered mode
Closes #21
2012-11-04 21:44:38 +00:00
George Oikonomou
9215081f41
cc2530dk: Border router example changes:
...
- It now plays nicely with the cc2531 USB dongle
- We build it for the dongle by default
- Debugging with cc2530dk functions instead of printf
- Using __nonbanked optimisations
- During prefix requests, invert LED blinking to make things more visible
- Removed leftover include
- Code style fixes
See Pull Request #21
2012-11-04 21:44:24 +00:00
George Oikonomou
13f20225a6
Sensinode: Border router debug without printf
...
Closes #20
2012-11-04 21:44:06 +00:00
George Oikonomou
be93f1ae52
cc2531: Added a new USB demo project (CDC-ACM)
...
See Pull Request #18
2012-11-01 17:42:01 +00:00
Adam Dunkels
944537fccf
Removed all old RCS tags in the Contiki source tree. Those RCS tags are not used any more, as we are now using git to manage the Contiki source tree
2012-10-26 15:54:49 +02:00
Niclas Finne
f5c8cff5b2
Made MT stack size configurable
2012-10-23 00:52:52 +02:00
George Oikonomou
8699f7741d
Fixed typos and a stray printf. Adjusted comments
2012-09-07 17:31:25 +01:00
simonduq
1bb055bae6
Fixed the udp-stream example: use the new RPL interface, reduce RAM usage
2012-08-30 13:22:27 +02:00
Antonio Lignan
c5e9d688a5
Fixed sht11 driver, now ensures the i2c bus is disabled when initializing
2012-08-16 14:12:27 +02:00
Antonio Lignan
73e7f25cbc
Simple phidget-like relay driver for the Z1 mote with basic functionalities
2012-07-30 11:27:13 +02:00
George Oikonomou
43f2790357
Added channel_get() to the cc2x3x RF drivers
2012-07-11 10:53:14 +01:00
Nicolas Tsiftes
86115a392e
Include string.h
2012-06-27 15:44:53 +02:00
Nicolas Tsiftes
0ba83a10df
Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki
2012-06-27 15:42:51 +02:00
Joakim Eriksson
51b73127e9
* Simple JSON parser and generator.
...
* Simple HTTP webservice with support for both receiving and sending HTTP requests.
* json-ws example that optionally push sensor data to COSM over IPv6.
2012-06-12 16:42:16 +02:00
Niclas Finne
f177284a73
Added option to specify the IPv6 prefix
2012-06-12 16:32:05 +02:00
Nicolas Tsiftes
21f2b42090
Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki
2012-06-11 08:01:03 +02:00
David Kopf
37c407b177
Patch from Landon Fuller adds const to PROGMEM, required for newer avr-gcc
2012-06-10 12:54:11 -04:00
Matthias Kovatsch
9096da299e
Added sub-resource example.
2012-06-09 12:20:57 +02:00
Matthias Kovatsch
ed66cfa364
Disabled debugging.
2012-06-09 11:18:51 +02:00
Matthias Kovatsch
6c813f0fb1
Fixed bug in debug print noticed by Linus.
2012-06-09 11:14:25 +02:00
Matthias Kovatsch
4a96e12890
Added Giovanni Pellerano's radio resource.
2012-06-09 10:47:09 +02:00
Nicolas Tsiftes
e84d6fc665
Added default targets and removed certain C flags.
2012-06-04 20:02:23 +02:00
Fredrik Osterlind
c2b7e26e33
removed io.h include, now handled by Contiki to support more compilers
2012-05-29 17:08:17 +02:00
David Kopf
e62f2c3977
Ensure MAXDADNS is defined in uip-ds6.h
...
Set no RPL as webserver6.minimal-net default and update README
2012-05-28 10:01:34 -04:00
Fredrik Osterlind
6ff349f3e6
bugfix in fragmentation test mode: avoid reading from outside buffer placed on stack
2012-05-25 14:36:13 +02:00
George Oikonomou
2f89f41b5a
cc2x3x RPL/non-RPL handling:
...
- Relevant examples explicitly request it in their Makefile
- Removed the definition of UIP_CONF_IPV6_RPL from
contiki-conf.h. If needed, it's defined through a -D
2012-05-16 15:22:31 +01:00
George Oikonomou
1f7171f943
Adjust cc2x3x ports to the new clock API
2012-05-16 15:22:31 +01:00
George Oikonomou
efd6d12831
cc2530dk and Sensinode example udp server code cleanup
2012-05-16 15:22:31 +01:00
Matthias Kovatsch
3dea97e247
Updated file references and README.
2012-05-13 17:15:57 +02:00
Matthias Kovatsch
0038acfa87
Cleaned up filenames
2012-05-13 17:13:54 +02:00
Matthias Kovatsch
222a858254
Optimized configuration to fit into sky again.
2012-05-13 16:23:28 +02:00
Antonio Lignan
6df9ffb731
Zolertia's light sensor ziglet
2012-05-11 13:39:59 +02:00
Antonio Lignan
5a431482bf
Squeeze websense example
2012-05-09 10:44:41 +02:00
George Oikonomou
52d0117086
Offload some bytes off the cc2x3x stack for the sensinode & cc2530dk udp server example
2012-04-26 17:21:33 +01:00